Search NASA⌕ Search

SEARCH · Search NASA

Results for “solid oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Fuel Cell Propulsion Systems for an All-electric Personal Air Vehicle

There is a growing interest in the use of fuel cells as a power source for all-electric aircraft propulsion as a means to substantially reduce or eliminate environmentally harmful emissions. Among the technologies under consideration for these concepts are advanced proton exchange membrane and solid oxide fuel cells, alternative fuels and fuel processing, and fuel storage. This paper summarizes the results of a first-order feasibility study for an all-electric personal air vehicle utilizing a fuel cell-powered propulsion system. A representative aircraft with an internal combustion engine was chosen as a baseline to provide key parameters to the study, including engine power and subsystem mass, fuel storage volume and mass, and aircraft range. The engine, fuel tank, and associated ancillaries were then replaced with a fuel cell subsystem. Various configurations were considered including: a proton exchange membrane (PEM) fuel cell with liquid hydrogen storage; a direct methanol PEM fuel cell; and a direct internal reforming solid oxide fuel cell (SOFC)/turbine hybrid system using liquid methane fuel. Each configuration was compared to the baseline case on a mass and range basis.

Kohout, Lisa L.↗
NASA NTRS2003

Fuel Cell Propulsion Systems for an All-Electric Personal Air Vehicle

There is a growing interest in the use of fuel cells as a power source for all-electric aircraft propulsion as a means to substantially reduce or eliminate environmentally harmful emissions. Among the technologies under consideration for these concepts are advanced proton exchange membrane and solid oxide fuel cells, alternative fuels and fuel processing, and fuel storage. This paper summarizes the results of a first-order feasibility study for an all-electric personal air vehicle utilizing a fuel cell-powered propulsion system. A representative aircraft with an internal combustion engine was chosen as a baseline to provide key parameters to the study, including engine power and subsystem mass, fuel storage volume and mass, and aircraft range. The engine, fuel tank, and associated ancillaries were then replaced with a fuel cell subsystem. Various configurations were considered including: a proton exchange membrane (PEM) fuel cell with liquid hydrogen storage; a direct methanol PEM fuel cell; and a direct internal reforming solid oxide fuel cell (SOFC)/turbine hybrid system using liquid methane fuel. Each configuration was compared to the baseline case on a mass and range basis.

Kohout, Lisa L.↗
DOE OSTI2024

Simulating hindered grain boundary diffusion using the smoothed boundary method

Abstract Grain boundaries can greatly affect the transport properties of polycrystalline materials, particularly when the grain size approaches the nanoscale. While grain boundaries often enhance diffusion by providing a fast pathway for chemical transport, some material systems, such as those of solid oxide fuel cells and battery cathode particles, exhibit the opposite behavior, where grain boundaries act to hinder diffusion. To facilitate the study of systems with hindered grain boundary diffusion, we propose a model that utilizes the smoothed boundary method to simulate the dynamic concentration evolution in polycrystalline systems. The model employs domain parameters with diffuse interfaces to describe the grains, thereby enabling solutions with explicit consideration of their complex geometries. The intrinsic error arising from the diffuse interface approach employed in our proposed model is explored by comparing the results against a sharp interface model for a variety of parameter sets. Finally, two case studies are considered to demonstrate potential applications of the model. First, a nanocrystalline yttria-stabilized zirconia solid oxide fuel cell system is investigated, and the effective diffusivities are extracted from the simulation results and are compared to the values obtained through mean-field approximations. Second, the concentration evolution during lithiation of a polycrystalline battery cathode particle is simulated to demonstrate the method’s capability.

Materials Science↗
DOE OSTI2026

Operando X-Ray Diffraction During High Temperature Electrolysis

This work presents the design, development, and deployment of an operando X-ray diffraction (XRD) system for high-temperature electrolysis (HTE), enabling real-time characterization of solid oxide electrolysis cells (SOECs) under true operational conditions. The integration of an HTE test stand within a synchrotron radiation environment, mimicking the conditions of a laboratory setup, aims to enhance our understanding of the degradation processes affecting the performance and longevity of SOECs. Utilizing a custom furnace and a high precision motor stack assembly at the Stanford Synchrotron Radiation Lightsource (SSRL), the system revealed unparalleled insights into the structural evolution of SOEC components through various operational stages, including initial heat ramp, cell reduction, fuel ramp, and wet electrolysis. Initial results demonstrate the significant impact of the initial heating and cooling on secondary phase formation within the SOEC, highlighting the utility of operando XRD for developing more efficient and durable hydrogen production technologies.

08 HYDROGEN↗
NASA NTRS2004

Progress in High Power Density SOFC Material Development for Aerospace Applications

Solid oxide fuel cell (SOFC) systems for aircraft applications require order of magnitude increase in specific power density and long life under aircraft operating conditions. Advanced SOFC materials and fabrication processes are being developed at NASA GRC to increase specific power density and durability of SOFC cell and stack. Initial research efforts for increasing specific power density are directed toward increasing the operating temperature for the SOFC system and reducing the weight of the stack. While significant research is underway to develop anode supported SOFC system operating at temperatures in the range of 650 - 850 C for ground power generation applications, such temperatures may not yield the power densities required for aircraft applications. For electrode-supported cells, SOFC stacks with power densities greater than 1.0 W/sq cm are favorable at temperatures in excess of 900 C. The performance of various commercial and developmental anode supported cells is currently being evaluated in the temperature range of 900 to 1000 C to assess the performance gains and materials reliability. The results from these studies will be presented. Since metal interconnects developed for lower temperature operation are not practical at these high temperatures, advanced perovskite based ceramic interconnects with high electronic conductivity and lower sintering temperatures are being developed. Another option for increasing specific power density of SOFC stacks is to decrease the stack weight. Since the interconnect contributes to a significant portion of the stack weight, considerable weight benefits can be derived by decreasing its thickness. Eliminating the gas channels in the interconnect by engineering the pore structure in both anode and cathode can offer significant reduction in thickness of the ceramic interconnect material. New solid oxide fuel cells are being developed with porous engineered electrode supported structures with a 10 - 20 micron thin electrolyte. The performance data for advanced SOFC cells with engineered porosity in both electrodes will be presented.

Cable, Thomas L.↗
NASA NTRS1995

High-temperature oxidation behavior of reaction-formed silicon carbide ceramics

The oxidation behavior of reaction-formed silicon carbide (RFSC) ceramics was investigated in the temperature range of 1100 to 1400 C. The oxidation weight change was recorded by TGA; the oxidized materials were examined by light and electron microscopy, and the oxidation product by x-ray diffraction analysis (XRD). The materials exhibited initial weight loss, followed by passive weight gain (with enhanced parabolic rates, k(sub p)), and ending with a negative (logarithmic) deviation from the parabolic law. The weight loss arose from the oxidation of residual carbon, and the enhanced k(sub p) values from internal oxidation and the oxidation of residual silicon, while the logarithmic kinetics is thought to have resulted from crystallization of the oxide. The presence of a small amount of MoSi, in the RFSC material caused a further increase in the oxidation rate. The only solid oxidation product for all temperatures studied was silica.

Ogbuji, Linus U. J. T.↗
NASA NTRS2017

Mars Molniya Orbit Atmospheric Resource Mining

This NASA Innovative Advanced Concepts (NIAC) Phase I study examined the revolutionary concept of performing resource collection and utilization during Mars orbital operations in order to enable the landing of large payloads. An exploration architecture was developed, out of which several mission alternatives were developed. Concepts of operations were then developed for each mission alternative, followed by concepts for spacecraft systems, which were traded to assess their feasibility. A novel architecture using Mars Molniya Orbit Atmospheric Resource Mining is feasible to enable an Earth-independent and pioneering, permanent human presence on Mars by providing a reusable, single-stage-to-orbit transportation system. This will allow cargo and crew to be routinely delivered to and from Mars without transporting propellants from Earth.In Phase I, our study explored how electrical energy could be harnessed from the kinetic energy of the incoming spacecraft and then be used to produce the oxygen necessary for landing. This concept of operations is revolutionary in that its focus is on using in situ resources in complementary and varied forms: the upper atmosphere of Mars is used for aerocapture, which is followed by aerobraking, the kinetic energy of the spacecraft is transformed into usable electrical energy during aerobraking, and the atmospheric composition is the source of oxidizer for a landing under supersonic retropropulsion. This NASA Innovative Advanced Concepts (NIAC) Phase I study explores a novel mission architecture to establish routine, Earth-independent transfer of large mass payloads between Earth and the Mars surface and back to Mars orbit. The first stage of routine mission operations involves an atmospheric resource mining aerobraking campaign following aerocapture into a highly elliptical Mars orbit. During each pass through the atmosphere, the vehicle ingests the atmospheric oxidizer and stores it onboard, using solid oxide electrolysis to convert the primarily CO2 atmosphere into usable O2 for propellant. Power is made available through the use of magnetohydrodynamic energy generation, which converts the motion of the plasma in the shock later into usable electrical energy. Upon termination of the aerobraking sequence, the descent vehicle detaches from the orbit stack, deorbits, and executes the entry, descent, and landing sequence. Hypersonic deceleration is achieved via a deployable heat shield to lower the vehicle ballistic coefficient, and supersonic and subsonic deceleration are achieved via retropropulsion. Mars surface operations involve resource mining of the Martian regolith to produce CH4 and O2 propellant to be used for the subsequent MDAV ascent back to high Mars orbit (HMO) providing an apoapsis raise maneuver to initialize the aerobraking sequence, in addition to providing fuel from the Mars surface for EDL propulsive descent. The Resource Collector Vehicle (RCV), which is used for the orbital mining operations, is raised back to HMO via onboard deployable augmented solar electric propulsion. Concepts of operations were developed for each mission alternative, to evaluate between them and assess feasibility.

Mining↗
DOE OSTI2025

Impact of SO 2 on NiFe Nanoparticle Exsolution and Dissolution from LaFe 0.9 Ni 0.1 O 3 Perovskite Oxides

Ni-doped LaFeO 3 perovskite oxide is a promising cathode material for solid oxide electrolysis cells (SOECs) designed for CO 2 /H 2 O coelectrolysis. Here, the performance of LaFe 0.9 Ni 0.1 O 3 is being investigated under real-world conditions that include exposure to acid gases, such as SO 2 , relevant to SOEC operation. Experiments show that LaFe 0.9 Ni 0.1 O 3 exsolves NiFe nanoparticles, along with the formation of surface SO 4 2– and SO 3 2– after being exposed to 200 ppm of SO 2 . This suggests that the ionic diffusion of Ni 3+ and Fe 3+ between the bulk and the surface remains unaffected throughout the exsolution–dissolution–exsolution cycle. Thermochemical water splitting has been employed as a probe reaction to evaluate the catalytic properties of the exsolved NiFe nanoparticles. These nanoparticles demonstrated improved hydrogen production compared to bare perovskite oxide substrates. However, after exposure to SO 2 , the formation of Fe-rich NiFe nanoparticles led to poor thermocatalytic performance and rapid deactivation of the perovskite at elevated temperatures. Density functional theory (DFT) analysis was utilized to validate the experimental findings, indicating a significantly negative reaction energy for water splitting over exsolved Fe, as well as stronger binding of SO 2 to Fe than to Ni. Computational analysis further suggests that the presence of surface sulfate promotes the formation of Fe-rich NiFe nanoparticles, aligning with the experimental results. Overall, this study clarifies how SO 2 affects the structure of SOEC perovskite oxide candidate materials. Future engineering efforts should focus on enhancing nanoparticle exsolution and sulfur resistance, which is crucial for improving the hydrogen production capacity of La-based perovskite oxides for electro- and thermocatalytic water splitting in real environments containing acid gases.

Najimu, Musa [Univ. of Southern California, Los An↗
DOE OSTI2025

3D Multiphysics Model for Large Scale Planar Cell: Inductance Investigation in Impedance Analysis

Developed a comprehensive 3D multiphysics model to analyze impedance behavior in large-scale planar Solid Oxide Fuel Cells (SOFCs). The model investigates how impedance varies across operating conditions and cell components, with a particular focus on inductive loops or negative capacitance at the air electrode. It was found that the Inductive loop disappears in the low-frequency zone when the activation overpotential or faradic current is not temperature-dependent. These findings offer new insights into SOFC impedance behavior.

impedence analysis↗
DOE OSTI2024

An efficient construction of nano-interfaces for excellent coking tolerance of cermet anodes

Solid oxide fuel cells (SOFCs) are promising energy conversion devices for the effective and convenient utilization of hydrocarbons (for example, methane) to electricity. However, the development of direct methane SOFCs is primarily hindered by the poor coking tolerance of the state-of-the-art Ni-based cermet anodes. Herein, we efficiently construct nano-interfaces in the anode by infiltrating a Ni 0.6 Y 0.064 Zr 0.336 O 2-δ (NYZ) catalyst onto the traditional Ni-based cermet anode to effectively enhance the coking tolerance. After being reduced in H 2 , Ni and Y 0.16 Zr 0.84 O 2-δ (YSZ) nanoparticles (NPs) are in situ formed on the surface of the Ni-YSZ substrate. The roughened anode demonstrates significantly improved fuel oxidation activity and coking tolerance, due likely to the formation of nano-interfaces. Specifically, when applied in the Ni-YSZ-based anode-supported SOFCs, a high peak power density of 1.785 W cm –2 and a stable operation of ~ 240 h with no observable degradation is achieved at 750 °C in nearly dry methane (3% H 2 O). Finally, a density functional theory study suggests that the excellent coking tolerance is attributed to the formation of OH species on Ni/YSZ nano-interfaces, which would further interact with intermediate carbon species to generate COH intermediates.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Cyber-Physical Reformer Development at NETL

Integrated energy systems are considered one of promising technologies to provide efficient, reliable and resilient power generation. The U.S. Department of Energy, National Energy Technology Laboratory is building an automated reformer-solid oxide fuel cell-gas turbine integrated energy system using a cyber-physical systems (CPS) approach, which exploits the advantage of both numerical model and physical system, as well as gapping the inaccessible technologies. Both the fuel reformer and the fuel cell stack are designed to be CPS components, of which the hardware representations are physically integrated with the gas turbine. A compact design is used with the consideration of future commercialization by placing all components inside of a pressure chamber, which is pressurized by the compressor discharge. (Presented virtually at the MILLENNIUM CLEAN and SUSTAINABLE POWER Workshop 2025)

cyber-physical↗
DOE OSTI2024

Performance Validation of a Thermally Integrated 50 kW High Temperature Electrolyzer System

In the proposed project, INL and OxEon seek to improve the value proposition of hydrogen production by integrating reversible fuel cell operations at relatively small scale for distributed energy applications. This goal will be accomplished by converting a 50 kW solid oxide electrolysis cell or SOEC system into a reversible system that operates at 30 kW in electrolysis mode and approximately 10 kW in fuel cell mode. The reversible SOC system will be operated for over 3,000 hours using an improved catalyst in the fuel electrode. Steam for the electrolysis will come from an electric boiler Thermal Energy Distribution System that will be configured to mimic an industrial source of low-grade heat. Thermodynamic analysis will be performed to demonstrate the potential of the system to achieve >85% system efficiency in electrolysis mode. Finally, a technoeconomic analysis will be completed to show potential to produce hydrogen at a cost of $2/kg. The figure at the right indicates a target cost breakdown to achieve that goal.

08 HYDROGEN↗
DOE OSTI2024

High Performance Metal-Supported SOFC System for Range Extension of Commercial Aviation

The DOE ARPA-E REEACH program [1] has enabled this Phase 1 study that conceptualizes a commercial 154 passenger electric aircraft using renewable aviation fuel for range extension while meeting similar mission performance levels as current commercial aircraft. Commercial aviation accounts for about 2.5% of global CO2 emissions, and close to 5% of overall anthropogenic climate change due to the added accounting of contrail’s effects [2]. The sector has adopted a goal of carbon neutrality by 2050 [3]. 110 nations, and recently the new US administration, have embarked on work to address this important challenge. The US DOE has released a roadmap to enable the further development of sustainable aviation fuel (SAF) in the hopes that it could meet all of aviation’s fuel needs by 2050 [4]. However, SAF fuel price and sufficient future feedstock availability remains a concern [5]. Considering the first commercial biofuel flight demonstration 14 years ago [6] and that SAF still only comprises less than 0.1% of jet fuel use, the question arises as how it can ramp up to 100% use in the next 27 years. One option that has the potential to substantially reduce the need for SAF is to implement light-weight Solid Oxide Fuel Cells (SOFCs) that can efficiently utilize SAF or other sulfur-free hydrocarbon fuels. As opposed to lower temperature PEM (Proton Exchange Membrane) fuel cells that can use high-purity hydrogen, SOFC’s fuels are very flexible, ranging from low cost liquefied natural gas (LNG), renewable liquefied natural gas (RLNG), to SAF, to generate clean electrical power for use in aviation propulsion and auxiliary power units [7] [8]. Research progress is needed to enable SOFCs to achieve 3.0 kW/kg power density, making them viable for aviation [9]. The DOE’s Advanced Research Projects Agency – Energy (ARPA-E) has therefore initiated an aviation SOFC R&D program that is anticipated to dramatically reduce aircraft fuel use though the implementation of “Range Extenders for Electric Aviation with low Carbon and High efficiency” (REEACH) [1] for medium range commercial aircraft. This report summarizes the progress during phase 1 of the REEACH program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗