SEARCH · Search NASA

Results for “stable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Survival and reversion of a stable L form in soil

The stable L form of Agromyces ramosus reverted to a bacterial form when incubated in sterilized soil. The cellular and colonial morphology of this bacterial form resembled that of the original parent bacterial form. The two forms differed, however, in that the revertant maintained its bacterial form when transferred onto a low-salt (NaCl) medium but was virtually completely induced into the L-form state on a high-salt medium. The original parent bacterial form was not sensitive to salt. The possibility is discussed that an L-form - bacterial-form cycle for this bacterium might occur naturally in soil. This cycle would be mediated by fluctuations in local salt concentrations in the soil.

Horwitz, A. H.↗

NASA NTRS1978

Some astrophysical consequences of the existence of a heavy stable neutral lepton

It is suggested that a stable, massive, neutral lepton may dominate the present mass density in the universe. To investigate this assumption, attention is given to an analysis of extended gauge theories as they apply to a lepton with a mass of a few GeV/sq cm. A critical factor in the accuracy of the hypothesis is the actual mass of the lepton, and it is noted that the more massive the individual particle, the smaller the particle's aggregate contribution to the universal mass density. High energy accelerators could prove a useful tool in an empirical determination of the lepton's mass. It is further suggested that the lepton considered might provide the material in galactic halos, or supply the mass necessary to bind galactic clusters. A study of intergalactic annihilation radiation is expected to yield more data pertaining to the lepton's existence.

Gunn, J. E.↗

NASA NTRS1977

Speed of light as measured by two terrestrial stable clocks

Despite the recent criticism within the special theory of relativity, there exists an arrangement of stable clocks rotating with the earth which predicts diurnal variations of the one-way speed of light, as suggested previously.

Hsu, J. P.↗

NASA NTRS1979

Development of processes and techniques for molding thermally stable, fire-retardant, low-smoke-emitting polymeric materials

All available newly developed nonmetallic thermally stable polymers were examined for the development of processes and techniques by compression molding, injection molding, or thermoforming cabin interior parts. Efforts were directed toward developing molding techniques of new polymers to economically produce usable nonmetallic molded parts. Data on the flame resistant characteristics of the materials were generated from pilot plant batches. Preliminary information on the molding characteristics of the various thermoplastic materials was obtained by producing actual parts.

Silverman, B.↗

NASA NTRS1979

Stable dielectric charge distributions from field enhancement of secondary mission

The emission of secondary electrons from dielectrics subject to numerous effects of electric field which are experimentally difficult to control is discussed. Measurements are reported using pulse techniques such that local fields do not build to significant levels, but measurements with fields present are also of interest. A specific series of measurements under controlled conditions are described and their implications in terms of fields, magnitude and angle, near the dielectric surface were examined. The measurements were made for a charged fluorinated-ethylene-propylene surface near a grounded aluminum half-round resting on the surface. The geometry produced a stable surface-charge gradient being controlled by a strongly enhanced secondary emission for which a model is constructed. Observations of surface flashovers under various conditions confirm the predictions of some scaling exercises.

Robinson, J. W.↗

NASA NTRS1979

Development of stable low-electroosmotic mobility coatings

Long-time rinsings of the Z6040-methlycellulose coating used successfully on the ASTP MA=011 experiment indicate the permanency of this coating is inadequate for continuous flowing systems. Two approaches are described for developing coatings which are stable under continuous fluid movement and which exhibit finite and predictable electroosmotic mobility values while being effective on different types of surfaces, such as glass, plastics, and ceramic alumina, such as is currently used as the electrophoresis channel in the GE-SPAR-CPE apparatus. The surface charge modification of polystyrene latex, especially by protein absorption, to be used as model materials for ground-based electrophoresis experiments, and the preliminary work directed towards the seeded polymerization of large-particle-size monodisperse latexes in a microgravity environment are discussed.

Vanderhoff, J. W.↗

NASA NTRS1978

Thermally stable polyimide components for space and commercial applications

The properties and applications of the thermally stable polyimide foams are discussed, together with an investigation of the methods for producing these materials. The qualities of the polyimide foams such as resistance to fire, not emitting smoke below 204 C, not producing incapacitating toxic by-products below 204 C, and resiliency and flexibility from minus 184 C to 315 C are stressed. The thermal, dielectric, induction, and microwave heating methods are discussed, particularly in relation to producing flexible resilient foams, thermal acoustical polyimide foams, and polyimide foam structural materials. It is concluded that the microwave approach shows to be a viable concept for generating flexible, low density cellular materials possessing a homogeneous structure and applicable to the aerospace industry and for commercial uses.

Gagliani, J.↗

NASA NTRS1979

Thermochemical characterization of some thermally stable thermoplastic and thermoset polymers

The thermochemical and flammability properties of some thermally stable polymers considered for use in aircraft interiors are described. The properties studied include: (1) thermomechanical properties such as glass transition and melt temperature; (2) dynamic thermogravimetric analysis in anaerobic environment; (3) flammability properties such as oxygen index, flame spread, and smoke evolution; and (4) selected physical properties. The thermoplastic polymers evaluated include polyphenylene sulfide, polyaryl sulfone, 9,9-bis(4-hydroxyphenyl)-fluorene polycarbonate-poly(dimethylsiloxane) and polyether sulfone. The thermoset polymers evaluated include epoxy, bismaleimide, a modified phenolic, and polyaromatic melamine resin. These resins were primarily used in the fabrication of glass-reinforced prepregs for the construction of experimental panels. Test results and relative rankings of some of the flammability parameters are presented, and the relationship of the molecular structure, char yield, and flammability properties of these polymers are discussed.

Kourtides, D. A.↗

NASA NTRS1978

Stable boundary layer wind shear model for aircraft flight hazard definition

It is pointed out that wind shear, particularly at the lower altitudes in the terminal area, has been identified as being hazardous to aircraft operations. Accurate and reliable wind profiles are required for use in fast time and manned flight simulation studies aimed at fully defining and understanding the wind shear hazard. A description is presented of wind speed profiles for neutral and stable atmospheric conditions developed for the simulation studies to improve the safety and reliability of operations in the terminal area. The wind shear is mathematically modeled and the mathematical scenarios are presented in a format for direct application to wind shear hazard/flight simulation studies.

Frost, W.↗

NASA NTRS1981

An asymptotically stable damping enhancement controller for large space structures

A secondary controller which uses a number of Annular Momentum Control Devices (AMCD's) for enhancement of structural damping in large flexible space structures is investigated. The closed-loop secondary controller is shown to be equivalent to a certain closed-loop optimal linear regulator, and the necessary and sufficient conditions for asymptotic stability are obtained. Sufficient conditions for asymptotic stability are also obtained which are much less restrictive than those obtained in an earlier paper. Design of a robust stable primary controller is also discussed.

Joshi, S. M.↗

NASA NTRS1981

Stable boundary approximations for a class of implicit schemes for the one-dimensional inviscid equations of gas dynamics

The applicability to practical calculations of recent theoretical developments in the stability analysis of difference approximations for initial-boundary-value problems of the hyperbolic type. For the numerical experiments, select the one-dimensional inviscid gas-dynamic equations in conservation-law form is selected. A class of implicit schemes based on linear multistep methods for ordinary differential equations is chosen and the use of space or space-time extrapolations as implicit or explicit boundary schemes is emphasized. Some numerical examples with various inflow-outflow conditions highlight the commonly discussed issues: explicit versus implicit boundary schemes, unconditionally stable schemes, and underspecification or overspecification of boundary conditions.

Yee, H. C.↗

NASA NTRS1982

Stable Stratification for Solar Ponds

Stable density gradient forms in pond saturated with disodium phosphate (DSP). Volume of DSP saturated water tends to develop temperature and density layers. Since tests indicate thermal and density gradients remain in equilibrium at heat removal rates of 60 percent or more of heat input rate, pond containing DSP would be suitable for collecting solar energy and transferring it to heat exchanger for practical use.

Mehta, G. D.↗

NASA NTRS1982

Stable and unstable near-resonant states in multilevel, severely truncated, quasi-geostrophic models

Multilevel, severely truncated, quasi-geostrophic models with damping that extend from the surface to 100 km, are used to study the stationary-wave response to orography and the concomitant feedbacks on the zonal flow. For a typical winter zonal-wind profile, it is shown that large amplitude or resonant planetary waves of intermediate zonal wavenumbers of about 4 or 5 occur with an equivalent barotropic structure. It is also shown that wave-zonal flow interaction with a mountain torque and temperature transport is stable to small perturbations on the low side of resonance and unstable on the high side of resonance. Resonant zonal wavenumbers of lower wave wavenumber also occur for the same zonal profile and have a node in the vertical with a small amplitude maximum near the surface and a larger amplitude maximum in the stratosphere. Instability depends on the presence of the orography and the basic asymmetric state as Newtonian damping and surface friction are sufficient to damp the baroclinic instability associated with a linear inviscid model.

Roads, J. O.↗

NASA NTRS1982

Stable NRM and mineralogy in Allende - Chondrules

The main objective of the present investigation is related to a description of the magnetic and mineralogic contrasts between chondrules which have a natural remanent magnetization (NRM) vector that is ultrastable during alternating field (AF) demagnetization, and those which have unstable NRM vectors when subjected to the same treatment. The results presented in the present investigation together with new magnetic results from Allende listed in a summary provided by Wasilewski (1981) are used as a basis to argue that the stable NRM in Allende was acquired during a sulfidation event. Attention is given to magnetic phases in Allende, experimental results obtained in magnetic studies conducted with 20 chondrules, and a magnetization model for Allende.

Wasilewski, P. J.↗

NASA NTRS1982

Characteristics of a stable auroral red arc event

The present investigation is concerned with an analysis of the measurements of the stable auroral red (SAR) arc of October 23, 1981, using data from orbit 1192 of Dynamics Explorer (DE) 2, during which a magnetic coincidence occurred with the DE-1 spacecraft near the red arc field line, and for which simultaneous ground-based intensity measurements from Richland, WA were available. The altitude of the DE-2 satellite was approximately 850 km during arc passage in the Northern Hemisphere and approximately 395 km during the conjugate hemisphere passage. The DE-1 satellite was at an altitude of approximately 6000 km during the magnetic coincidence with DE-2 in the Northern Hemisphere. The described observations and calculations reconfirm a previous understanding that the actual excitation of the O(1D) state responsible for the 6300 A emission of red arcs is caused by hot ionospheric thermal electrons.

Kozyra, J. U.↗

NASA NTRS1983

Unconditionally stable implicit-explicit algorithms for coupled thermal stress waves

An unconditionally stable implicit-explicit method is proposed for the analysis of transient coupled thermal stress waves, and the computer-implementation aspects of the method are discussed. In the method proposed here, the mechanical displacement and temperature are used as independent variables. The resulting coupled finite element matrix equations are symmetric.

Liu, W. K.↗

NASA NTRS1984

Structurally stable, thin silicon solar cells

A fabrication process for structurally stable thin solar cell wafers that produce good power output after irradiation is described. The fabrication process is as follows. A 6 mil, circular wafer is oxidized on both sides. One side is then patterned with a rectangular array of holes in the oxide that are nominally 75 mils square and separated by 2 mil spacings. Wells are then etched into the silicon with KOH to a depth of 4 mils, leaving a 2 mil, unetched thickness. Two areas on the surface are left unetched to provide pads for bonding or testing. All oxide is then removed and the rest of the processing is normal; the unetched face is used as the illuminated face. When all other processing is complete, a 2 X 2 cm cell is sawed from the starting wafer leaving a border that is approximately 10 mils wide. The effective thickness, determined by weighing an unmetallized sample, of such a cell is about 2.4 mil.

Arndt, R. A.↗

NASA NTRS1983

The effects of Ohmic heating and stable radiation on magnetic tearing

A study is made of the effect of a temperature-dependent Coulomb-like resistivity on the planar tearing mode. The local evolution of the temperature is described by an energy equation which includes Joule heating and optically thin radiation. The resulting system of coupled linear magnetohydrodynamic equations is solved numerically, and eigenfunctions and growth rates are obtained. In the absence of radiation, there are two distinct solutions above a critical value of the magnetic Reynolds number S, a tearing-like mode and a Joule-heating mode. Below this point, the growth rates coalesce into a conjugate-complex pair. When stable radiation (dR/dT greater than 0) is added, the heating mode disappears and a modified tearing excitation exists to much lower values of S before its growth is cut off by Ohmic heating. Examples are given for solar coronal parameters, and for those characteristic of fusion-research devices. The introduction of an effective value for the resistivity, in the presence of energy transport, allows a simple qualitative discussion of the different modes.

Tachi, T.↗