Search NASA⌕ Search

SEARCH · Search NASA

Results for “strong link”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Block Polyelectrolyte Additives That Modulate the Viscoelasticity and Enhance the Printability of Gelatin Inks at Physiological Temperatures

We demonstrate the utility of block polyelectrolyte (bPE) additives to enhance viscosity and resolve challenges with the three-dimensional (3D) printability of extrusion-based biopolymer inks. The addition of oppositely charged bPEs to solutions of photocurable gelatin methacryloyl (GelMA) results in complexation-driven self-assembly of the bPEs, leading to GelMA/bPE inks that are printable at physiological temperatures, representing stark improvements over GelMA inks that suffer from low viscosity at 37 °C, leading to low printability and poor structural stability. The hierarchical microstructure of the self-assemblies (either jammed micelles or 3D networks) formed by the oppositely charged bPEs, confirmed by small-angle X-ray scattering, is attributed to the enhancements in the shear strength and printability of the GelMA/bPE inks. Varying bPE concentration in the inks is shown to enable tunability of the rheological properties to meet the criteria of pre- and postextrusion flow characteristics for 3D printing, including prominent yielding behavior, strong shear thinning, and rapid recovery upon flow cessation. Moreover, the bPE self-assemblies also contribute to the robustness of the photo-cross-linked hydrogels; photo-cross-linked GelMA/bPE hydrogels are shown to exhibit higher shear strength than photo-cross-linked GelMA hydrogels. Last, the assessment of the printability of GelMA/bPE inks indicates excellent printing performance, including minimal swelling postextrusion, satisfactory retention of the filament shape upon deposition, and satisfactory shape fidelity of the various printed constructs. We envision this study to serve as a practical guide for the printing of bespoke extrusion inks where bPEs are used as scaffolds and viscosity enhancers that can be emulated in a range of photocurable precursors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Spring Dust in Colorado Plateau: Transport Pathways and Interannual Variability Derived From Two Decades of MERRA‐2 Reanalysis

Spring dust storms in the U.S. Southwest significantly impact environmental and human systems, yet their climatological patterns and driving mechanisms remain poorly understood. Using two decades of MERRA-2 reanalysis data and self-organizing map clustering, we identified four distinct dust transport pathways from surrounding and remote deserts for the top 10% of spring dust events impacting the Colorado Plateau: (a) intense southwesterly near-surface transport where eastward upward transport is blocked by topography, (b) substantial remote transport plus weaker surface emissions, (c) moderate southwesterly transport with stronger upper-level transport, and (d) rare northwesterly pattern linked to the Great Basin sources, which accounts for 38%, 14%, 37%, and 11% of total events, respectively. The frequency and intensity of these events strongly correlate with large-scale climate variability, with increased dust events during La Niña. Our results provide a robust framework for improving seasonal dust forecasts and understanding future dust dynamics under climate change.

aerosol transport↗
DOE OSTI2022

Twofold van Hove singularity and origin of charge order in topological kagome superconductor CsV 3 Sb 5

The layered vanadium antimonides AV 3 Sb 5 (A = K, Rb, Cs) are a recently discovered family of topological kagome metals that exhibit a range of strongly correlated electronic phases including charge order and superconductivity. However, it is not yet understood how the distinctive electronic structure of the kagome lattice is linked to the observed many-body phenomena. Here we combine angle-resolved photoemission spectroscopy and density functional theory to reveal multiple kagome-derived van Hove singularities (vHS) coexisting near the Fermi level of CsV 3 Sb 5 and analyse their contribution to electronic symmetry breaking. The vHS are characterized by two distinct sublattice flavours (p-type and m-type), which originate, respectively, from their pure and mixed sublattice characters. These twofold vHS flavours of the kagome lattice critically determine the pairing symmetry and unconventional ground states emerging in the AV 3 Sb 5 series. We establish that, among the multiple vHS in CsV 3 Sb 5 , the m-type vHS of the d xz /d yz kagome band and the p-type vHS of the d xy /d x2–y2 kagome band are located very close to the Fermi level, setting the stage for electronic symmetry breaking. The former band is characterized by pronounced Fermi surface nesting, while the latter exhibits a higher-order vHS. Furthermore, our work reveals the essential role of kagome-derived vHS for the collective phenomena realized in the AV 3 Sb 5 family.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Accelerating Bilevel Optimization With Hierarchical Many-Threaded Parallel Differential Evolution

Bilevel optimization is encountered in many relevant real-world applications. The main feature of this type of problem is that an upper-level optimization problem is constrained by a nested lower-level optimization problem. Because of this nested structure, bilevel problems (BLPs) are usually computationally expensive to solve. Differential evolution (DE) has demonstrated promising results in solving BLPs of relatively small scales. As the problem scale increases, the decision space becomes intrinsically larger, requiring a growing number of function evaluations for the method to work properly. In this context, heavy parallelization and high-performance computing techniques are indispensable to enable the resolution of more complex and challenging optimization problems. Hence, we propose a hierarchical many-threaded parallel DE approach for BLPs, where both levels are parallelized. The computational experiments demonstrate that the parallel implementation achieved runtime speeds ranging from 44 to 2559 times faster than the sequential version on a well-known scalable SMD benchmark test problem when executed on an NVIDIA A100 GPU. The findings indicate that the algorithm’s convergence is strongly influenced by the number of both upper- and lower-level generations. Moreover, the success of experiments with large-scale problems is closely linked to the choice of small population sizes.

Dufek, Amanda S↗
DOE OSTI2021

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. Furthermore, the results of this work can be used as guidelines for future additive manufacturing of PDCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Climate adaptation in Populus trichocarpa : key adaptive loci identified for stomata and leaf traits

We investigated adaptive genetic variation in Populus trichocarpa, a potential biofuel feedstock crop, to better understand how physiological traits may influence tolerance to water limitation. Our study focused on leaf and stomatal traits, given their roles in plant–water relations and adaptation. Using a diversity panel of over 1300 genotypes, we measured 14 leaf and stomatal traits under control (well-watered) and drought (water-limited) conditions. We conducted genome-wide association studies (GWAS), climate association analyses, and transcriptome (RNA-seq) profiling to identify genetic loci associated with phenotypic variation and adaptation. Stomatal traits, including size and density, were correlated with the climate of origin, with genotypes from more arid regions tending to have smaller but denser stomata. GWAS identified multiple loci associated with trait variation, including a major-effect region on chromosome 10 linked to stomatal size and abaxial contact angle. This locus overlapped with a tandem array of 3-ketoacyl-CoA synthase (KCS) genes and showed strong allele–climate and gene expression associations. Our findings reveal genetic and phenotypic variation consistent with local adaptation and suggest that future climates may favor alleles associated with smaller stomata, particularly under increasing aridity. This work provides insights into climate adaptation and breeding strategies for resilience in perennial crops.

Populus trichocarpa↗
DOE OSTI2023

Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment (BIRDIE) (Field Campaign Report)

The Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment or BIRDIE was a precipitation collection campaign designed to measure cosmogenic isotopes of beryllium in rainfall and other forms of precipitation across the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) atmospheric observatory. Precipitation samples were collected over three weeks (May 21-June 10, 2022) at 11 SGP sites across a 120-km 2 domain in northern and central Oklahoma. The field campaign targeted summertime convection rain events. We aimed to capture any spatial and/or temporal variability in the concentrations of beryllium-10 (10Be) and beryllium-7 (7Be) across the ARM SGP site during these rainfall events. The ratio of 10Be to 7Be (10/7Be) has been shown to be a powerful tracer for transport processes in the stratosphere-troposphere exchange (STE) system (e.g., Koch and Rind 1998). Any observed variability is analyzed to see if it could be linked to STE processes, including overshooting of deep convection clouds that penetrate the lower stratosphere. Six wet weather system events were collected within our three-week span. Five out of six of these rainfall events are classified as moderately to strongly convective. Those events are studied in more detail. The five systems also follow each other over a short period of 11 days. In our rainfall samples we observed spatial and event variability in the concentrations of beryllium-10 and -7 that resulted in variability of 10/7Be ratios. Each weather event appeared to exhibit a unique 10/7Be pattern across the domain that was not directly linked to storm total precipitation amount. To better understand the causes for this spatial variability, cloud characteristics in the domain were looked at to assess cloud type, cloud height, and depth information. We also ran Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model back trajectories to identify possible air mass and moisture origins across our events. Detailed analysis is ongoing. The purpose of this technical report is to provide background on using cosmogenic isotopes as atmospheric tracers, describe the experimental design, and present the beryllium concentration and ratio data. Lastly, we note that BIRDIE coincided with two other deep convection field campaigns in the area: The National Aeronautics and Space Administration (NASA)’s Dynamics and Chemistry of the Summer Stratosphere (DCOTSS) experiment (https://dcotss.org/) centered in Salina, Kansas, and the Targeted Observation by Radars and (uncrewed aerial systems) UAS of Supercells (TORUS) experiment (https://catalog.eol.ucar.edu/torus_2022) across the U.S. Central Plains. Additionally, a Lawrence Livermore National Laboratory ( LLNL) team at DCOTSS attempted to measure 10Be/7Be ratios on aerosols collected in situ in the lower and mid-stratosphere over Kansas using high-altitude balloons. Precipitation samples were also collected on the ground in Salina, Kansas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment (BIRDIE) (Final Report)

The Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment or BIRDIE was a precipitation collection campaign designed to measure cosmogenic isotopes of beryllium in rainfall and other forms of precipitation across the DOE Southern Great Plains (SGP) Atmospheric Radiation Measurement (ARM) site. Precipitation samples were collected over three weeks (May 21-June 10, 2022) at 11 SGP sites across a 120 km 2 domain in northern and central Oklahoma. The field campaign targeted summer-time convection rain events. We aimed to capture any spatial and/or temporal variability in the concentrations of beryllium-10 (10Be) and beryllium-7 (7Be) across the SGP ARM site during these rainfall events. The ratio of 10Be to 7Be (10/7Be) has been shown to be a powerful tracer for transport processes in the stratosphere-troposphere exchange (STE) system (e.g., Koch and Rind 1998). Any observed variability is analyzed to see if it could be linked to STE processes, including overshooting of deep convection clouds which penetrate the lower stratosphere. Six wet weather system events were collected within our three-week span. Five out of six of these rainfall events are classified as moderately to strongly convective. Those events are studied in more detail. The five systems also follow each other over a short time period of eleven days. In our rainfall samples we observed spatial and event variability in the concentrations of beryllium-10 and -7 which resulted in variability of 10/7 Be ratios. Each weather event appeared to exhibit a unique 10/7Be pattern across the domain that was not directly linked to storm total precipitation amount. To better understand the causes for this spatial variability, cloud characteristics in the domain were looked at to assess cloud type, cloud height and depth information. We also ran Hysplit back trajectories to identify possible air mass and moisture origins across our events. Detailed analysis is still on-going. The purpose of this technical report is to provide background on using cosmogenic isotopes as atmospheric tracers, describe the experimental design, and present the beryllium concentration and ratio data.

58 GEOSCIENCES↗
DOE OSTI2023

Transcriptional Control of hgcAB by an ArsR-Like Regulator in Pseudodesulfovibrio mercurii ND132

The hgcAB gene pair encodes mercury (Hg) methylation capability in a diverse group of microorganisms, but its evolution and transcriptional regulation remain unknown. Working from the possibility that the evolutionary function of HgcAB may not be Hg methylation, we test a possible link to arsenic resistance. Using model Hg methylator Pseudodesulfovibrio mercurii ND132, we evaluated transcriptional control of hgcAB by a putative ArsR encoded upstream and cotranscribed with hgcAB. This regulator shares homology with ArsR repressors of arsenic resistance and S-adenosylhomocysteine (SAH)- responsive regulators of methionine biosynthesis but is distinct from other ArsR/SahR proteins in P. mercurii. Using quantitative PCR (qPCR) and RNA sequencing (RNA-seq) transcriptome analyses, we confirmed this ArsR regulates hgcAB transcription and is responsive to arsenic and SAH. Additionally, RNA-seq indicated a possible link between hgcAB activity and arsenic transformations, with significant upregulation of other ArsRregulated arsenic resistance operons alongside hgcAB. Interestingly, wild-type ND132 was less sensitive to As(V) (but not As(III)) than an hgcAB knockout strain, supporting the idea that hgcAB may be linked to arsenic resistance. Arsenic significantly impacted rates of Hg methylation by ND132; however, responses varied with culture conditions. Differences in growth and metabolic activity did not account for arsenic impacts on methylation. While arsenic significantly increased hgcAB expression, hgcAB gene and transcript abundance was not a good predictor of Hg methylation rates. Taken together, these results support the idea that Hg and As cycling are linked in P. mercurii ND132. Our results may hold clues to the evolution of hgcAB and the controls on Hg methylation in nature. This work reveals a link between microbial mercury methylation and arsenic resistance and may hold clues to the evolution of mercury methylation genes (hgcAB). Microbes with hgcAB produce methylmercury, a strong neurotoxin that readily accumulates in the food web. This study addresses a critical gap in our understanding about the environmental factors that control hgcAB expression. We show that hgcAB expression is controlled by an ArsR-like regulator responsive to both arsenic and S-adenosylhomocysteine in our model organism, Pseudodesulfovibrio mercurii ND132. Exposure to arsenic also significantly impacted Pseudodesulfovibrio mercurii ND132 mercury methylation rates. However, expression of hgcAB was not always a good predictor of Hg methylation rates, highlighting the roles of Hg bioavailability and other biochemical mechanisms in methylmercury production. This study improves our understanding of the controls on hgcAB expression, which is needed to better predict environmental methylmercury production

RNA-seq↗
DOE OSTI2020

Potential Vorticity Mixing in a Tangled Magnetic Field

A theory of potential vorticity (PV) mixing in a disordered (tangled) magnetic field is introduced. The analysis is in the context of β -plane MHD, with a special focus on the physics of momentum transport in the stably stratified, quasi-2D solar tachocline. A physical picture of mean PV evolution by vorticity advection and tilting of magnetic fields is proposed. In the case of weak field perturbations, quasi-linear theory predicts that the Reynolds and magnetic stresses balance as turbulence Alfvénizes for a larger mean magnetic field. Jet formation is explored quantitatively in the mean field–resistivity parameter space. However, since even a modest mean magnetic field leads to large magnetic perturbations for large magnetic Reynolds number, the physically relevant case is that of a strong but disordered field. We show that numerical calculations indicate that the Reynolds stress is modified well before Alfvénization—i.e., before fluid and magnetic energies balance. To understand these trends, a double-average model of PV mixing in a stochastic magnetic field is developed. Calculations indicate that mean-square fields strongly modify Reynolds stress phase coherence and also induce a magnetic drag on zonal flows. The physics of transport reduction by tangled fields is elucidated and linked to the related quench of turbulent resistivity. We propose here a physical picture of the system as a resisto-elastic medium threaded by a tangled magnetic network. Applications of the theory to momentum transport in the tachocline and other systems are discussed in detail.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Evaluating the economic impact of water scarcity in a changing world

Abstract Water scarcity is dynamic and complex, emerging from the combined influences of climate change, basin-level water resources, and managed systems’ adaptive capacities. Beyond geophysical stressors and responses, it is critical to also consider how multi-sector, multi-scale economic teleconnections mitigate or exacerbate water shortages. Here, we contribute a global-to-basin-scale exploratory analysis of potential water scarcity impacts by linking a global human-Earth system model, a global hydrologic model, and a metric for the loss of economic surplus due to resource shortages. We find that, dependent on scenario assumptions, major hydrologic basins can experience strongly positive or strongly negative economic impacts due to global trade dynamics and market adaptations to regional scarcity. In many cases, market adaptation profoundly magnifies economic uncertainty relative to hydrologic uncertainty. Our analysis finds that impactful scenarios are often combinations of standard scenarios, showcasing that planners cannot presume drivers of uncertainty in complex adaptive systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Exploring the Links between Structural Distortions, Orbital Ordering, and Multipolar Magnetic Ordering in Double Perovskites Containing Re(VI) and Os(VII)

A combination of high-resolution powder diffraction techniques and solid-state NMR has been employed to explore the links between crystal structure, orbital ordering, and magnetism in three isostructural double perovskites containing transition metal ions with a 5d 1 configuration. In Ba 2 ZnReO 6 , both neutron and synchrotron X-ray powder diffraction data reveal a cubic-to-tetragonal transition at 23 K that breaks the degeneracy of the t 2g orbitals and leads to a pattern of orbital ordering that stabilizes magnetic ordering when the sample is cooled below 16 K. Similar behavior is observed in Ba 2 MgReO 6 , with an orbital ordering temperature of 33 K and a magnetic ordering temperature of 18 K. Prior theoretical works suggest that the pattern of orbital order seen in the P42/mnm space group is needed to stabilize the heavily canted antiferromagnetism of these compounds. Unfortunately, powder diffraction data is not sensitive enough to differentiate between the I4/mmm and P42/mnm structural models, as the distortions are too subtle to be unambiguously identified from either neutron or synchrotron X-ray powder diffraction methods. In contrast, both diffraction and 7 Li NMR data indicate that Ba 2 LiOsO 6 retains the cubic structure down to 1.7 K. The antiferromagnetic ground state and lack of any sign of orbital ordering in Ba 2 LiOsO 6 provide compelling evidence that the electronically driven tetragonal distortion seen in Ba2ZnReO6, and Ba2MgReO6 is intimately linked to the magnetic ordering seen in those compounds. The absence of magnetic reflections in high intensity neutron powder diffraction data collected on Ba 2 MgReO 6 strongly suggests ordering of multipolar moments on Re(VI), likely ferro-octupolar ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Interplay Between Cation and Anion Redox in Ni-Based Disordered Rocksalt Cathodes

The reversibility of the redox processes plays a crucial role in the electrochemical performance of lithium-excess cation-disordered rocksalt (DRX) cathodes. Here, we report a comprehensive analysis of the redox reactions in a representative Ni-based DRX cathode. The aim of this work is to elucidate the roles of multiple cations and anions in the charge compensation mechanism that is ultimately linked to the unique electrochemical performance of Ni-based DRX cathodes. Generally, the low-voltage discharge plateau that results in the low energy efficiency and strong voltage hysteresis is associated with the low-voltage oxygen redox. However, incorporating Mo cation promotes the oxygen activity and the Mo migration between octahedral and tetrahedral sites enhances the O reduction potential as well as energy efficiency. This work highlights the important role that electrochemically inactive transition metal plays in the redox chemistry and provides useful insights into the potential pathway to further address the challenges in Ni-based DRX systems.

Yue, Yuan↗
DOE OSTI2020

Generation of thermofield double states and critical ground states with a quantum computer

Significance Our experiment prepares two types of nontrivial quantum states on a trapped ion quantum computer: the thermofield double state of the transverse-field Ising model at arbitrary temperature and the quantum critical state of the zero-temperature model. We use techniques motivated by the quantum approximate optimization algorithm, and we implement a hybrid quantum–classical optimization loop to prepare the quantum critical state. Our results pave the way for exploring strongly correlated models at finite temperature and teleportation protocols inspired by black hole physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Cluster environment quenches the star formation of low-mass satellite galaxies from the inside-out

ABSTRACT Environment plays a critical role in the star formation history of galaxies. Tidal and hydrodynamical stripping, prominent in cluster environment, can remove the peripheral gas of galaxies and star formation may thus be environmentally suppressed from the outside-in. We revisit the environmental dependence of the radial gradient of specific star formation rate (sSFR) profile. We probe the radial gradient by using the archival spectral indices D4000n and HδA measured from SDSS fibre spectra, to indicate central sSFR and the total sSFR from fitting the spectral energy distribution. Despite the low spatial resolution, the wealth of SDSS data allows to disentangle the dependences on stellar mass, sSFR, and environment. We find that low-mass satellite galaxies in the mass range $9\lt \mathrm{log}\, \mathcal {M}_{\star }/\mathcal {M}_{\odot }\lt 9.8$ on average quench in more inside-out pattern compared to isolated galaxies matched in mass, sSFR, and fibre coverage. This environmental effect is particularly strong for galaxies below the star formation main sequence, and peaks for those in the core of massive clusters where the phase-space diagram reveals clear links between the inside-out quenching and orbital properties. Our results suggest that both tidal and hydrodynamical interactions in cluster environment suppress the star formation of satellites mainly from the inside-out. As accreted gas of low angular momentum from hot gas haloes is an important source for replenishing central gas reservoir, we discuss how gas stripping in clusters may lead to starvation and cause inside-out quenching when the outer star-forming discs are not significantly affected.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Mechanistic modeling of lifetime distribution of SiC/SiC composite claddings

Silicon carbide (SiC) fiber-reinforced SiC matrix (SiC/SiC) composites have emerged as a new material candidate for fuel claddings in light water reactors. Recent studies showed that the load capacity of SiC/SiC materials exhibits a considerable statistical variation. Therefore, reliability analysis plays a critical role in design of SiC/SiC composite claddings. Here, this paper presents a probabilistic model for the lifetime distribution of SiC/SiC composites. The model is anchored by a multiaxial stress-based failure criterion and subcritical damage accumulation mechanism. Based on the kinetics of subcritical damage growth, the lifetime distribution of a laboratory test specimen for any given loading history can be calculated. A finite weakest-link model is used to extrapolate the lifetime distribution of test specimens to full-length claddings. It is shown that the damage accumulation mechanism has a strong influence on the lifetime distribution of the cladding. This finding highlights the importance of understanding the static fatigue behavior of SiC/SiC composites. The present analysis also demonstrates an intricate length effect on the failure probability of the cladding, which is expected to play a crucial role in design extrapolation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Batteries Included: Top 10 Findings from Berkeley Lab Research on the Growth of Hybrid Power Plants in the United States

One of the most important electric power system trends of the 2010s was the rapid deployment of wind turbines and photovoltaic arrays, but a twist for the 2020s may be the rapid deployment of ‘hybrid’ generation resources. Hybrid power plants typically combine solar or wind (or other energy sources) with co-located storage. While hybridization helps to ease the challenge of balancing variable supply and demand, its relative novelty means that research is needed to facilitate integration and promote innovation. Combining the characteristics of multiple energy, storage, and conversion technologies poses complex questions for grid operations and economics. Project developers, system operators, planners, and regulators would benefit from better data, methods, and tools to estimate the costs, values, and system impacts of hybrid projects. This publication showcases some of Berkeley Lab’s robust research program intended to support private- and public-sector decision-making about hybrid plants in the United States. Our short briefing summarizes articles that we published between 2020 and 2022, links to the in-depth reports, and provides contact details for further engagement on the specific research topics: Growth: Developer interest in hybrid power plants is strong and growing Price vs. Value: PV+storage hybrids have low PPA prices and high value in some regions Market Drivers: Solar hybridization is driven by tax credits and other benefits Configuration Choices: Market prices have incentivized shorter duration batteries with PV Capacity Value: The capacity contribution of a hybrid is less than the sum of its parts Ancillary Services: AS markets are a valuable yet fleeting option for hybrids Market Participation: Hybrids can more flexibly engage with electricity markets Operations: The power system value of hybrids depends on how they are operated Distributed Hybrids: Growth of customer-sited PV+storage hybrids offers new opportunities Future Research: Where next? Priority areas for hybrid power research.

25 ENERGY STORAGE↗
DOE OSTI2023

Advanced monitoring of soil-vegetation co-dynamics reveals the successive controls of snowmelt on soil moisture and on plant seasonal dynamics in a mountainous watershed

Evaluating the interactions between above- and below-ground processes is important to understand and quantify how ecosystems respond differently to atmospheric forcings and/or perturbations and how this depends on their intrinsic characteristics and heterogeneity. Improving such understanding is particularly needed in snow-impacted mountainous systems where the complexity in water and carbon storage and release arises from strong heterogeneity in meteorological forcing and terrain, vegetation and soil characteristics. This study investigates spatial and temporal interactions between terrain, soil moisture, and plant seasonal dynamics at the intra- and inter-annual scale along a 160 m long mountainous, non-forested hillslope-to-floodplain system in the upper East River Watershed in the upper Colorado River Basin. To this end, repeated UAV-based multi-spectral aerial imaging, ground-based soil electrical resistivity imaging, and soil moisture sensors were used to quantify the interactions between above and below-ground compartments. Results reveal significant soil-plant co-dynamics. The spatial variation and dynamics of soil water content and electrical conductivity, driven by topographic and soil intrinsic characteristics, correspond to distinct plant types, with highest plant productivity in convergent areas. Plant productivity in heavy snow years benefited from more water infiltration as well as a shallow groundwater table depth. In comparison, low snowpack years with an early first bare-ground date, which are linked to an early increase in plant greenness, imply a short period of saturated conditions that leads to lower average and maximum greenness values during the growing season. Overall, these results emphasize the strong impact of snowpack dynamics, and terrain and subsurface characteristics on the heterogeneity in plant type and seasonal dynamics.

54 ENVIRONMENTAL SCIENCES↗