Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Influence of wall plasma on microwave frequency and power in relativistic backward wave oscillator

The RF breakdown of the slow wave structure (SWS), which will lead to the generation of the wall plasma, is an important cause for pulse shortening in relativistic backward wave oscillators. Although many researchers have performed profitable studies about this issue, the influence mechanism of this factor on the microwave generation still remains not-so-clear. This paper simplifies the wall plasma with an “effective” permittivity and researches its influence on the microwave frequency and power. The dispersion relation of the SWS demonstrates that the introduction of the wall plasma will move the dispersion curves upward to some extent, which is confirmed by particle-in-cell (PIC) simulations and experiments. The plasma density and volume mainly affect the dispersion relation at the upper and lower frequency limits of each mode, respectively. Meanwhile, PIC simulations show that even though no direct power absorption exists since the wall plasma is assumed to be static, the introduction of the wall plasma may also lead to the decrease in microwave power by changing the electrodynamic property of the SWS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mode competition and selection in overmoded surface wave oscillator

The overmoded surface wave oscillator (SWO) is one of the promising devices to generate high-power millimeter and subterahertz waves for its merits of high efficiency and easy fabrication. But the employed slow wave structure with large diameter may introduce mode competition as the adverse effects. Therefore, the mode competition and selection in the overmoded surface wave oscillator are investigated in detail in this paper. By using the theoretical analysis and particle-in-cell simulation, the potential transverse mode and axial mode competition is pointed out, and the physical mechanisms and methods for mode selection are investigated. At last, the results are verified in the design of a 0.14 THz overmoded SWO without mode competition, which can generate the output power up to 70 MW at the frequency of 146.3 GHz with conversion efficiency almost 20% when beam voltage and current are, respectively, about 313 kV and 1.13 kA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PLASTIC BEHAVIOR OF POLYCRYSTALLINE TANTALUM IN THE 5 x 10^7/s REGIME

The goal of this experiment is to investigate the plastic response of Tantalum to dynamic loading at high strain rates. The samples used were derived from high purity rolled plate, polished down to thicknesses in the range 25-100 {micro}m. Dynamic loading was applied by direct laser ablation of the sample, with pulses up to 10 ns long, at the Jupiter Laser Facility. The elastic-plastic wave structure was measured using two line VISAR systems of different sensitivity, and strain rates were inferred from the rise time of the waves. The elastic wave amplitudes indicated flow stresses between 2 and 3 GPa, depending on the sample thickness. Samples were recovered for post-shot metallographic analysis.

36 MATERIALS SCIENCE↗

Numerical studies of powerful terahertz pulse generation from a super-radiant surface wave oscillator

The results of theoretical and numerical studies of coherent stimulated terahertz radiation from intense, subnanosecond electron beam are presented. The mechanism of terahertz pulse generation is associated with self-bunching of the beam and slippage of the wave over the whole electron flow. This so called Cherenkov super-radiance (SR) is used to propose a compact terahertz generator with high peak power. A large cross-section (overmoded), slow wave structure is designed to support the high power handling capability, and the mode competition is avoided by operating the device in the surface wave status. With 2.5 D particle-in-cell simulation, the 'hot' characteristics of the proposed super-radiant terahertz generator are investigated, and the numerical results show that the SR peak power could be further increased by optimizing the amplitude profile of electron pulse. Under the condition of 0.5 ns pulsewidth, 500 kV voltage, and 1.5 kA current, the 110 ps, 680 MW, and 0.14 THz SR pulse is achieved with a power efficiency of 90.67% in TM{sub 01} mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid startup in relativistic backward wave oscillator by injecting external backward signal

Investigation on accelerating the building up of oscillation and achieving a rapid startup in powerful relativistic backward wave oscillator by injecting a weak external backward signal is carried out in this paper. Synchronizing the signal with the backward wave excited by intense electron beam extracting with slow wave structure, the initial noise is greatly reduced and mode competition is restrained. The analysis is demonstrated by high power X-band backward wave oscillator experiment, in which a plasma switch is designed to realize the backward signal injection. The results show that the significant reduction of microwave output delay is attained and the start time of oscillation is ahead of 10 ns with the energy conversion efficiency increases about 62%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kronoseismology. IV. Six Previously Unidentified Waves in Saturn’s Middle C Ring

Recent studies of stellar occultations observed by the Visual and Infrared Mapping Spectrometer on board the Cassini spacecraft have demonstrated that multiple spiral wave structures in Saturn’s rings are probably generated by normal-mode oscillations inside the planet. Wavelet-based analyses have been able to unambiguously determine both the number of spiral arms and the rotation rate of many of these patterns. However, there are many more planetary normal modes that should have resonances in the rings, implying that many normal modes do not have sufficiently large amplitudes to generate obvious ring waves. Fortunately, recent advances in wavelet analysis allow weaker wave signals to be uncovered by combining data from multiple occultations. These new analytical tools reveal that a pattern previously identified as a single spiral wave actually consists of two superimposed waves, one with five spiral arms rotating at 1593.°6/day and one with 11 spiral arms rotating at 1450.°5/day. Furthermore, a broad search for new waves revealed four previously unknown wave patterns with six, seven, eight, and nine spiral arms rotating around the planet at 1538.°2/day, 1492.°5/day, 1454.°2/day, and 1421.°8/day, respectively. These six patterns provide precise frequencies for another six fundamental normal modes inside Saturn, yielding what is now a complete sequence of fundamental sectoral normal modes with azimuthal wavenumbers from 2 to 10. These frequencies should place strong constraints on Saturn’s interior structure and rotation rate, while the relative amplitudes of these waves should help clarify how the corresponding normal modes are excited inside the planet.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerated Electron-Beam Formation with a High Capture Coefficient in a Parallel Coupled Accelerating Structure

An electron beam with a high (close to 100%) coefficient of electron capture into the regime of acceleration has been obtained in a linear electron accelerator based on a parallel coupled slow-wave structure, electron gun with microwave-controlled injection current, and permanent-magnet beam-focusing system. The high capture coefficient was due to the properties of the accelerating structure, beam-focusing system, and electron-injection system. Main characteristics of the proposed systems are presented.

43 PARTICLE ACCELERATORS↗

Three dimensional dust-acoustic solitary waves in an electron depleted dusty plasma with two-superthermal ion-temperature

A theoretical investigation is carried out to study the existence and characteristics of propagation of dust-acoustic (DA) waves in an electron-depleted dusty plasma with two-temperature ions, which are modeled by kappa distribution functions. A three-dimensional cylindrical Kadomtsev-Petviashvili equation governing evolution of small but finite amplitude DA waves is derived by means of a reductive perturbation method. The influence of physical parameters on solitary wave structure is examined. Furthermore, the energy integral equation is used to study the existence domains of the localized structures. It is found that the present model can be employed to describe the existence of positive as well as negative polarity DA solitary waves by selecting special values for parameters of the system, e.g., superthermal index of cold and/or hot ions, cold to hot ion density ratio, and hot to cold ion temperature ratio. This model may be useful to understand the excitation of nonlinear DA waves in astrophysical objects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Soft-sphere simulations of a planar shock interaction with a granular bed

Here we consider the problem of shock propagation through a layer of spherical particles. A point particle force model is used to capture the shock-induced aerodynamic force acting upon the particles. The discrete element method (DEM) code liggghts is used to implement the shock-induced force as well as to capture the collisional forces within the system. A volume-fraction-dependent drag correction is applied using Voronoi tessellation to calculate the volume of fluid around each individual particle. A statistically stationary frame is chosen so that spatial and temporal averaging can be performed to calculate ensemble-averaged macroscopic quantities, such as the granular temperature. A parametric study is carried out by varying the coefficient of restitution for three sets of multiphase shock conditions. A self-similar profile is obtained for the granular temperature that is dependent on the coefficient of restitution. A traveling wave structure is observed in the particle concentration downstream of the shock and this instability arises from the volume-fraction-dependent drag force. The intensity of the traveling wave increases significantly as inelastic collisions are introduced. Downstream of the shock, the variance in Voronoi volume fraction is shown to have a strong dependence upon the coefficient of restitution, indicating clustering of particles induced by collisional dissipation. Statistics of the Voronoi volume are computed upstream and downstream of the shock and compared to theoretical results for randomly distributed hard spheres.

42 ENGINEERING↗

Direct imaging of plasma waves using ultrafast electron microscopy

A femtosecond plasma imaging modality based on a new development of ultrafast electron microscope is introduced. We investigated the laser-induced formation of high-temperature electron microplasmas and their subsequent non-equilibrium evolution. Based on a straightforward field imaging principle, we directly retrieve detailed information about the plasma dynamics, including plasma wave structures, particle densities, and temperatures. We discover that directly subjected to a strong magnetic field, the photo-generated microplasmas manifest in novel transient cyclotron echoes and form new wave states across a broad range of field strengths and different laser fluences. Intriguingly, the transient cyclotron waves morph into a higher frequency upper-hybrid wave mode with the dephasing of local cyclotron dynamics. The quantitative real-space characterizations of the non-equilibrium plasma systems demonstrate the feasibilities of a new microscope system in studying the plasma dynamics or transient electric fields with high spatiotemporal resolutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Advanced Simulation Toolkit for Photon Band Gap Accelerators

Photon band gap (PBG) structures have been investigated for accelerator and microwave tube applications over the past decade, and these investigations have concentrated on two distinct concepts. In one approach, a traditional accelerator slow-wave structure is created with a sequence of cavities of a new type that each contains a specially designed lattice of rods that endow it with desirable properties. Another more recent application of the same concept is to use a photonic crystal to confine the synchronous mode at the boundary of a dielectric wall accelerator (DWA), but let other modes excited by the beam escape. A related concept is the photonic crystal accelerator.

43 PARTICLE ACCELERATORS↗

A nonlinear Zakharov-Kuznetsov equation in magnetized plasma with q-nonextensive electrons velocity distribution

By using the reductive perturbation method (RPM), a nonlinear Zakharov-Kuznetsov (ZK) equation for ion-acoustic solitary waves (IASWs) is derived for a magnetized plasma in which the electrons are nonextensively distributed. The combined effects of electron nonextensivity, strength of magnetic field, and obliqueness on the ion acoustic (IA) solitary profile are analyzed. Three different ranges of the nonextensive q-parameter are considered. It is observed that the system may support both compressive as well as rarefactive solitons. The magnetic field has no effect on the amplitude of solitary waves whereas the obliqueness affects both the amplitude as well as the width of the solitary wave structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion acoustic shock waves in degenerate plasmas

Korteweg de Vries Burgers equation for negative ion degenerate dissipative plasma has been derived using reductive perturbation technique. The quantum hydrodynamic model is used to study the quantum ion acoustic shock waves. The effects of different parameters on quantum ion acoustic shock waves are studied. It is found that quantum parameter, electrons Fermi temperature, temperature of positive and negative ions, mass ratio of positive to negative ions, viscosity, and density ratio have significant impact on the shock wave structure in negative ion degenerate plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear structures and anomalous transport in partially magnetized E×B plasmas

Nonlinear dynamics of the electron-cyclotron instability driven by the electron E x B current in a crossed electric and magnetic field is studied. In the nonlinear regime, the instability proceeds by developing a large amplitude coherent wave driven by the energy input from the fundamental cyclotron resonance. Further evolution shows the formation of the long wavelength envelope akin to the modulational instability. Simultaneously, the ion density shows the development of a high-k content responsible for wave focusing and sharp peaks on the periodic cnoidal wave structure. Here, it is shown that the anomalous electron transport (along the direction of the applied electric field) is dominated by the long wavelength part of the turbulent spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-organized standing waves generated by AC-driven electron cyclotron drift instabilities

The formation of self-organized standing wave structures is observed due to the electron cyclotron drift instability (ECDI) driven by a time-varying external electric field and a crossed magnetic field. Using a particle-in-cell simulation, two standing wave mechanisms are identified: the linear mode and the beating mode. In the former, a standing wave emerges as a superposition of two counterpropagating ion acoustic waves predicted by the linear theory of ECDI. On the other hand, in the beating mode, the plasma wave is in resonance with the applied frequency. Nonlinear resonance of such standing waves results in a change in the dominant wavenumber and frequency. Such counterpropagating plasma waves are consistent with the experimental observations using coherent Thomson scattering in a crossed-field plasma discharge.

42 ENGINEERING↗

Flow Strength Measurements of Wrought and AM SS304L via Pressure Shear Plate Impact Experiments

Pressure-shear plate impact experiments were performed to quantify flow strength of wrought, as-built additively manufactured (AM), and heat-treated and recrystallized AM 304 L stainless steel (SS304L) under combined loading. Impact velocities spanned between 0.03 and 0.24 mm/μs, resulting in corresponding pressures of 0.62–5.93 GPa. Flow strength measurements are comparable for the sample variants across the studied loading conditions; however, shear wave structures significantly differ between sample type. Microstructurally aware simulations indicate local strain differences attributed to anisotropic elastic constants of large grains (~1 mm) in the as-built and heat-treated AM may impede the ability to uniformly transmit a shear wave.

36 MATERIALS SCIENCE↗

Formation and Shape Changing of Conductive Helical Ribbons via Deposition of Highly Stressed Films on Mechanically Responsive Substrates

Abstract This work demonstrates that the electrodeposition of highly stressed films on compliant ribbons is a robust process to obtain helical structures with excellent mechanical stability and potentially high thermal and electrical conductance. Electrodeposition on end‐tethered ribbons alters their axial and bending stiffness while imparting mechanical stress to drive the formation of a helix with a microscale diameter and pitch in a controlled and scalable manner. The process generates helices with diameters and pitches between 80 and 200 µm and lengths as large as several millimeters. The approach is amenable to parallel processing a large number of 3D structures on any substrate, including large‐area semiconductor wafers. This phenomenon is explained in terms of the change of stress gradients as material is added. Applications of the fabricated helices include antennas, metamaterials, and slow‐wave structures in frequency ranges not previously attainable.

Chemistry↗

Dynamic time-warping correction for shifts in ultrahigh resolving power ion mobility spectrometry and structures for lossless ion manipulations

Detection of arrival time shifts between ion mobility spectrometry (IMS) separations can limit achievable resolving power (Rp), particularly when multiple separations are summed or averaged, as commonly practiced. Such variations are more apparent in higher Rp measurements, and are particularly evident in long path length traveling wave structures for lossless ion manipulations (SLIM) IMS due to their typically much longer separation times. Here we explore the utility of a data processing approaches employing linear alignment (LA) and nonlinear dynamic time warping (DTW) of IMS separations to correct for variations between separations, such as due to pressure fluctuations. For multipass SLIM IMS separations, where narrow mobility range measurements have arrival times that can extend to several seconds, the LA approach effectively corrected for such variations, and significantly improvement Rp for summed separations. However, LA was much less effective for high Rp broad mobility range separations, such as obtained with multilevel SLIM IMS. Changes in IMS arrival times ions were observed to be correlated with small pressure changes, with approximately 0.6% relative arrival time shifts being common, sufficient to result in a loss of Rp for summed separations. Comparison of the approaches showed DTW alignment performed similarly to LA when used over a narrow mobility range, but was significantly better (providing narrower peaks and higher signal intensities) for wide mobility range data. We found the DTW approach increased Rp by as much as 115% for measurements in which 50 IMS separations over 2 seconds were summed, and leading to a large improvement in effective Rp. We conclude that DTW is superior to LA for ultrahigh resolution broad mobility range SLIM IMS separations, correcting for ion arrival time shifts regardless of the cause. Our tool is publicly available for use with universal ion mobility format (.UIMF) and text (.txt) files.

Data alignment, dynamic time warping, ion mobility↗