Search NASA⌕ Search

SEARCH · Search NASA

Results for “supersaturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Correlations and droplet growth

Consideration is given to the time development of a system in which small spheres of a stable phase grow out of a supersaturated melt. The spheres then grow and shrink in a manner similar to Ostwald ripening. The growth process of pairs of particles in an effective background accounts for can be used to explain the long time correlations which develop in the system. The correlations broaden the distribution of particles sizes, even for relatively dilute systems.

Marder, M.↗

Gallium-bearing sphalerite in a metal-sulfide nodule of the Qingzhen (EH3) chondrite

The composition and possible history of the Qingshen (EH3) chondrite is presented. The chondrite contains a population of spheroidal metal-sulfide nodules, which display textural evidence of reheating and melting. Evidence of metal sulfuration is also present, suggesting replacement of metal by sulfide during melting. This process has led to the nucleation of perryite along metal-sulfide interfaces. The Ga-bearing sphalerite that was found may have formed by injection of molten sulfide droplets into the metal followed by subsolidus diffusion of Ga from the metal into the sulfide. The latter may occur because of Ga supersaturation in the metal during progressive sulfuration and its decreased affinity for the metal phase during cooling below the taenite-kamacite transition point.

Rambaldi, E. R.↗

Presence, segregation and reactivity of H, C and N dissolved in some refractory oxides

The sources of impurities, particularly carbon, in high melting oxides and silicates are discussed, along with detection and quantification methods. The impurities are important for their effects on bulk material properties through the media of, e.g., surface or grain boundary characteristics. The impurities are usually encountered by the contact of the oxide (refractory) material with volatiles such as H2O and CO2, which become incorporated in the material and form anion complexes with oxygen acting as a covalent bonded ligand. The specific processes undergone by MgO in assimilating C impurities are delineated, using data obtained with X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry and nuclear reaction profiling. Finally, maintenance of a supersaturated solid solution with C impurities by space charge control is described as a means of offset impurity effects.

Freund, F.↗

Carbon in oxides and silicates - Dissolution versus exsolution

A theory of CO2 dissolution in the solid state is developed, using the idea proposed by Freund (1983) concerning dissolution of CO/CO2 in MgO on the basis of their experimental results obtained with an MgO-containing carbon impurity. It is shown that the dissolution mechanism may be linked to an internal redox reaction by which a certain number of lattice oxygens change their formal oxidation state from -2 to -1, while the carbon becomes reduced. The similarities between the mechanisms of CO and/or CO2 dissolution and that of H2O dissolution are pointed out. A hypothesis is proposed concerning the exsolution of reduced carbon from supersaturated solid solutions under conditions which permit C-C bond formation.

Freund, F.↗

Experimental studies of the vapor phase nucleation of refractory compounds. III - The condensation of silver

Measurements are reported of the critical supersaturation necessary to initiate the vapor phase nucleation of silver over the ambient temperature range 500-950 K at total pressures of 250 and 500 torr of hydrogen. The results are compared with the predictions of both classical nucleation theory and the theory of a physical spinodal developed by Rasmussen (1982), neither of which adequately describes the present observations. The nucleation of silver appears to be dependent on the total pressure of the system in a manner which suggests that three-body reactions are necessary in order to form the initial silver cluster (e.g., dimers) from the monoatomic vapor.

Nuth, J. A.↗

Flow and atomization in flashing injectors

Flashing injection involves expanding a fluid through an injector until a supersaturated state is reached, causing a portion of the fluid to flash to a vapor. This investigation considered the flow, atomization and spreading properties of flashing injectors with flowing liquids containing dissolved gases (Jet A/air) as well as superheated liquids (Freon-11). The use of a two-stage expansion process, separated by an expansion chamber, was found to be beneficial for good atomization properties of flashing injection - particularly for dissolved gas systems. Both locally homogeneous and separated flow models provided good predictions of injector flow properties. Conventional correlations for drop sizes from pressure and airblast injectors were successfully modified, using the separated flow model to prescribe injector exit conditions, and to correlate drop size measurements. Additional experimental results are provided for spray angles of sprays from flashing injectors.

Solomon, A. S. P.↗

Liquid drop stability for protein crystal growth in microgravity

It is possible to grow protein crystals for biomedical research in microgravity by deploying a protein-rich solution from a syringe, forming a drop in which crystallization can occur with the proper degree of supersaturation. Drop stability is critical to the success of this research, due to the large drop sizes which can be achieved in space. In order to determine the type of syringe tips most suitable to support these large drops, tests were performed during brief periods of weightlessness onboard the NASA KC-135 low-gravity simulation aircraft. The drops were analyzed using three simple models in which the samples were approximated by modified pendulum and spring systems. It was concluded that the higher frequency systems were the most stable, indicating that of the syringes utilized, a disk-shaped configuration provided the most stable environment of low-gravity protein crystal growth.

Owen, Robert B.↗

Protein crystal growth in low gravity

The solubility and growth mechanism of canavalin were studied, and the applicability of the Schlieren technique to protein crystal growth was investigated. Canavalin which may be crystallized from a basic solution by the addition of hydrogen (H+) ions was shown to have normal solubility characteristics over the range of temperatures (5 to 25 C) and pH (5 to 7.5) studied. The solubility data combined with growth rate data gathered from the seeded growth of canavalin crystals indicated that the growth mechanism at high supersaturation ratios (>1.28) is screw dislocation like. A Schlieren apparatus was constructed and flow patterns were observed in Rochelle salt (sodium potassium tartrate), lysozyme, and canavalin. The critical parameters were identified as the change in density with concentration (dp/dc) and the change in index of refraction with concentration (dn/dc). Some of these values were measured for the materials listed.

Feigelson, Robert S.↗

Growth process of gamma'-particles in a liquid-quenched Ni-15 at percent Al alloy

The growth of gamma-prime particles in a supersaturated Ni-15 at% Al alloy prepared by the liquid-quench method was studied using a magnetic mass balance, transmission electron microscopy, and field ion microscopy. Three stages in the precipitation and growth of these particles are demonstrated. In the first phase, the gamma-prime phase was produced by nucleation of spinodal decomposition of the alloy. In the second stage, spherical gamma-prime particles were arranged at random in the matrix with the size independent of aging time. Then, the Al concentration in the matrix decreased with the -1/3 power of the aging time. These results suggest that the degree of ordering increases with aging time. In the third stage, the particles were coarsened with aging time. They were arranged in the matrix (100) zone and were cubic, with the cube face lying on (100). The interfacial free energy was 28.4 mJ/sq m at 873 K and 22.4 mJ/sq m at 973 K.

Tachikake, A.↗

The effect of aspect ratio and fluid flow on crystal growth

Supersaturated solutions were conditioned at different aspect ratios before crystal growth. The conditioned solutions were poured out into a dish to initiate crystal nucleation and growth. The rate of growth was measured microscopically and found to depend upon the aspect ratio. Secondly, the number and size of crystals formed was found to depend upon the aspect ratio. The data support the above conclusion, but do not prove it.

Barber, Patrick G.↗

Studies of implanted iron in silicon by channeling and Rutherford backscattering

Different amounts of 100-keV iron ions have been implanted into high-resistivity p-type FZ-silicon samples. The implantation damage, recovery of damage during various annealing periods and temperatures, movement of iron atoms under annealing and oxidation, and the kinds of defects created after implantation, annealing, or oxidation are all investigated by channeling and backscattering measurements. It is found that the critical fluence of 100-keV iron implanted into silicon at room temperature is about 2.5 x 10 to the 14th Fe/sq cm, and that iron atoms are gettered by silicon oxidation. In this supersaturated region, iron atoms diffuse slightly towards bulk silicon during high-temperature annealing (greater than or equal to 1100 C) but not at all during low-temperature annealing (less than or equal to 1000 C) in dry nitrogen ambient.

Wang, P. W.↗

Cloud and radiation experiments with a general circulation model

Interactions between cloud fields and radiation fields in GCM simulations were examined with June-July simulations with the UCLA/Goddard GCM. Modified radiation parameterizations for longwave and shortwave transfer were made to the GCM. The model generated supersaturation, boundary layer and convective clouds. The simulations were configured to consider the absence of water vapor absorption in the longwave parameterization, no appearance of anvils, and no detrainment of liquid water.

HARSHVARDHAN↗

An analysis of refractory silicate nucleation via the theory of the physical spinodal

An analysis of experimental data has been conducted using the theory of the spinodal, as a test of its applicability to refractory vapors. A promising aspect of this approach is its prediction of a temperature and supersaturation at which there no longer exists a barrier to nucleation; such a phenomenon has been observed in both the SiO-H2 and MgSiO-H2 systems, where a small change in ambient temperature yielded 5-10 orders of magnitude increases in the nucleation rate within a few seconds.

Nuth, Joseph A., III↗

Occultation determination of Neptune's oblateness and stratospheric methane mixing ratio

The occultation of a star by Neptune on August 20, 1985 was observed at 2.2 micron wavelength with telescopes at the European Southern Observatory (ESO) and the Cerro Tololo Inter-American Observatory (CTIO). The detection of a 'central flash' midway between immersion and emersion has allowed the determination of Neptune's oblateness and the atmospheric extinction at 2.2 microns, which is related to the stratospheric methane mixing ratio. An oblateness of (2.08 +0.19 or -0.18) x 10 to the 2nd is found and, assuming a stratospheric temperature of 120 K, a value of 0.6 percent is inferred (with an uncertainty of a factor of 10) for the methane mixing ratio (CH4/H2) at 0.3 mbar. The latter value may indicate supersaturation of methane in Neptune's stratosphere.

Lellouch, E.↗

Microgravity nucleation and particle coagulation experiments support

A preliminary model for diffusion between concentric hemispheres was adapted to the cylindrical geometry of a microgravity nucleation apparatus, and extended to include the effects of radiation and conduction through the containment walls. Computer programs were developed to calculate first the temperature distribution and then the evolving concentration field using a finite difference formulation of the transient diffusion and radiation processes. The following estimations are made: (1) it takes approximately 35 minutes to establish a steady temperature field; (2) magnesium vapors released into the argon environment at the steady temperature distribution will reach a maximum supersaturation ratio of approximately 10,000 in the 20-second period at a distance of 15 cm from the source of vapors; and (3) approximately 750W electrical power will be required to maintain steady operating temperatures within the chamber.

Lilleleht, L. U.↗

Nucleation in super-saturated products

The procedure used is based on theories of W. Gibbs. The formation of the liquid phase from a supersaturated vapor of a pure substance is first considered. A comparison is made with experience in the area of nucleation. Generally known facts and experiments are mentioned. Liquid nuclei and crystal nuclei are examined.

Volmer, M.↗

Growth kinetics of the (001) face of TGS below the ferroelectric transition temperature

The growth rates of the (001) face of triglycine sulfate (TGS) from aqueous solutions were measured at 33.55 C in an apparatus which produced a laminar flow of solution past the crystal. The data of growth rate as a function of relative supersaturation were compared with the results of two well-known models: the Burton-Cabrera-Frank (1951) surface diffusion model and the birth-and-spreading growth model. Both models produced good fits to the growth rate data. However, on the basis of the qualitative aspects of the experimentally-observed growth, it is suggested that the correct growth model for these crystals is the Burton-Cabrera-Frank model.

Reiss, D. A.↗

Precipitation in a rapidly solidified and aged Ni-Al-Mo alloy

The early stages of decomposition of a highly supersaturated nickel-base alloy have been studied using TEM, SEM, and X-ray diffraction. The material was produced as a metastable solid solution by chill-block melt-spinning. On aging, the material exhibited a number of decomposition products appearing in series or concomitantly. Some of the decomposition products of this alloy, Ni4Mo, Ni3Mo, and Ni2Mo, are related to those found in Ni-Mo binary alloys. Alpha-Mo formed during solidification was distinguished from that formed by precipitation in the solid state by orientation relationships.

Nash, P.↗