SEARCH · Search NASA
Results for “surface composition”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Assessing the fidelity of shallow-water carbonates as records of the Ni isotope composition of surface seawater
Explore the source record for details and available documents.
A determination of the composition and surface pressure of the martian atmosphere.
Calibration of Martian spectra using laboratory spectra of pure carbon dioxide and in combination with nitrogen and argon
Risk Assessment of Carbon Fiber Composite in Surface Transportation
The vulnerability of surface transportation to airborne carbon fibers and the national risk associated with the potential use of carbon fibers in the surface transportation system were evaluated. Results show airborne carbon fibers may cause failure rates in surface transportation of less than one per year by 1995. The national risk resulting from the use of carbon fibers in the surface transportation system is discussed.
The relative reflectance of Iapetus at 1.6 and 2.2 microns
Iapetus was observed at 0.56, 1.6, and 2.2 microns near seven elongations. The infrared reflectance at 2.2 microns relative to 0.56 microns varies from 0.6 to 1.6 (plus or minus 0.1). The low infrared reflectance of the trailing hemisphere of Iapetus is consistent with the previous identification of water ice as the composition of the bright surface. The high infrared reflectance of the leading hemisphere indicates a dark material that is too red to be consistent with a carbonaceous chondritic or 'C'-type surface composition.
Mission concepts for Venus surface investigation
Mission concepts for the in situ investigation of the Venus atmosphere and surface in the period following the VOIR mission are discussed. The science issues in Venus exploration and possible means of meeting the scientific objectives are considered, including global mapping, surface composition determination, atmospheric composition determination and surface-atmosphere interactions. Particular attention is then given to the feasibility of buoyant stations for atmospheric observation, balloon-tether combinations for surface observations, and the active thermal control by a reversed Brayton cycle or a vapor compression cycle of a long-lived Venus lander. Of the concepts examined, it is found that only the balloon-tether system would be impractical for the mission outlined for it, while the other two concepts appear feasible.
Fabrication and wear test of a continuous fiber/particulate composite total surface hip replacement
Explore the source record for details and available documents.
Vibration tailoring of advanced composite lifting surfaces
Explore the source record for details and available documents.
Surface characterization in composite and titanium bonding: Carbon fiber surface treatments for improved adhesion to thermoplastic polymers
The effect of anodization in NaOH, H2SO4, and amine salts on the surface chemistry of carbon fibers was examined by X-ray photoelectron spectroscopy (XPS). The surfaces of carbon fibers after anodization in NaOH and H2SO4 were examined by scanning transmission electron microscopy (STEM), angular dependent XPS, UV absorption spectroscopy of the anodization bath, secondary ion mass spectrometry, and polar/dispersive surface energy analysis. Hercules AS-4, Dexter Hysol XAS, and Union Carbide T-300 fibers were examined by STEM, angular dependent XPS, and breaking strength measurement before and after commercial surface treatment. Oxygen and nitrogen were added to the fiber surfaces by anodization in amine salts. Analysis of the plasmon peak in the carbon 1s signal indicated that H2SO4 anodization affected the morphological structure of the carbon fiber surface. The work of adhesion of carbon fibers to thermoplastic resins was calculated using the geometric mean relationship. A correlation was observed between the dispersive component of the work of adhesion and the interfacial adhesion.
Utilization of surface cover composition to improve the microwave determination of snow water equivalent in a mountain basin
Satellite microwave data have been used to derive areal snow water equivalent in flat homogeneous areas. Over heterogeneous mountainous areas different algorithms are needed to retrieve the water equivalent of the snow cover. A mixed pixel model based on the percentage of vegetation cover within a pixel has been developed to simulate the microwave brightness temperatures for the Rio Grande basin in southwestern Colorado. A relationship between the difference in microwave-brightness temperature at two different frequencies (37- and 18-GHz horizontal polarization), and the basin-wide average snow water equivalent was obtained. The areal snow-water equivalent values derived from the model were consistent with values generated by a reliable snowmelt run-off model using snow-cover extent data.
Thermal emittance enhancement of graphite-aluminum and graphite-copper composite radiator surfaces for space power applications
Explore the source record for details and available documents.
On the Relationship Between Site Geology and the Distribution of Surface Regolith Compositions at the Apollo Sites
Some considerations are discussed on how information on site geology can be obtained from the distribution of data points on 2-element plots of composition of lunar regolith samples collected along a traverse.
Analytical Instrument for Determining the Composition of Surface Materials and Ices in the Solar System: Mini-CIDEX to TIDE
Exobiology experiments onboard spacecraft or space probes often require the detection and identification of a wide range of chemical species over vast concentration ranges. These experiments must be carried out under severely limited conditions utilizing minimal resources. The mini-Cometary Ice and Dust Experiment (mini-CIDEX) instrument was developed for the chemical analysis of a cometary environment. It combined a Gas Chromatograph (GC) with a helium-based Ion Mobility Spectrometer (IMS) to fulfill the analytical requirements of a cometary exobiology mission: universal response; ppb sensitivity; low mass, volume, and consumables. Mini-CIDEX has evolved into the Titan Ice and Dust Experiment (TIDE) for the chemical analysis of the surface (liquid and solid) and lower atmosphere of Titan. The complexity of the analyses will be similar to the comet application with a heavier emphasis on organic molecules. TIDE is a component of the Titan Orbiter Aero-Rover Mission (TOAM) proposed to NASA's New Visions Program. Advances to the Mini-CIDEX technology for the Titan application and the analytical capabilities of TIDE will be presented.
Texturing Carbon-carbon Composite Radiator Surfaces Utilizing Atomic Oxygen
Future space nuclear power systems will require radiator technology to dissipate excess heat created by a nuclear reactor. Large radiator fins with circulating coolant are in development for this purpose and an investigation of how to make them most efficient is underway. Maximizing the surface area while minimizing the mass of such radiator fins is critical for obtaining the highest efficiency in dissipating heat. Processes to develop surface roughness are under investigation to maximize the effective surface area of a radiator fin. Surface roughness is created through several methods including oxidation and texturing. The effects of atomic oxygen impingement on carbon-carbon surfaces are currently being investigated for texturing a radiator surface. Early studies of atomic oxygen impingement in low Earth orbit indicate significant texturing due to ram atomic oxygen. The surface morphology of the affected surfaces shows many microscopic cones and valleys which have been experimentally shown to increase radiation emittance. Further study of this morphology proceeded in the Long Duration Exposure Facility (LDEF). Atomic oxygen experiments on the LDEF successfully duplicated the results obtained from materials in spaceflight by subjecting samples to 4.5 eV atomic oxygen from a fixed ram angle. These experiments replicated the conical valley morphology that was seen on samples subjected to low Earth orbit.
Crosscutting Airborne Remote Sensing Technologies for Oil and Gas and Earth Science Applications
Airborne imaging spectroscopy has evolved dramatically since the 1980s as a robust remote sensing technique used to generate 2-dimensional maps of surface properties over large spatial areas. Traditional applications for passive airborne imaging spectroscopy include interrogation of surface composition, such as mapping of vegetation diversity and surface geological composition. Two recent applications are particularly relevant to the needs of both the oil and gas as well as government sectors: quantification of surficial hydrocarbon thickness in aquatic environments and mapping atmospheric greenhouse gas components. These techniques provide valuable capabilities for petroleum seepage in addition to detection and quantification of fugitive emissions. New empirical data that provides insight into the source strength of anthropogenic methane will be reviewed, with particular emphasis on the evolving constraints enabled by new methane remote sensing techniques. Contemporary studies attribute high-strength point sources as significantly contributing to the national methane inventory and underscore the need for high performance remote sensing technologies that provide quantitative leak detection. Imaging sensors that map spatial distributions of methane anomalies provide effective techniques to detect, localize, and quantify fugitive leaks. Airborne remote sensing instruments provide the unique combination of high spatial resolution (<1 m) and large coverage required to directly attribute methane emissions to individual emission sources. This capability cannot currently be achieved using spaceborne sensors. In this study, results from recent NASA remote sensing field experiments focused on point-source leak detection, will be highlighted. This includes existing quantitative capabilities for oil and methane using state-of-the-art airborne remote sensing instruments. While these capabilities are of interest to NASA for assessment of environmental impact and global climate change, industry similarly seeks to detect and localize leaks of both oil and methane across operating fields. In some cases, higher sensitivities desired for upstream and downstream applications can only be provided by new airborne remote sensing instruments tailored specifically for a given application. There exists a unique opportunity for alignment of efforts between commercial and government sectors to advance the next generation of instruments to provide more sensitive leak detection capabilities, including those for quantitative source strength determination.
Detection of Trace Silicone Contamination on Carbon Fiber Reinforced Composite (CFRP) Surfaces by Picosecond Laser Induced Breakdown Spectroscopy (LIBS)
Explore the source record for details and available documents.
NASA SPoRT’s Sea Surface Temperature Composite Product: Status and Applications
Explore the source record for details and available documents.