Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Epitaxial growth of high quality WO 3 thin films

We have grown epitaxial WO 3 films on various single-crystal substrates using radio-frequency (RF) magnetron sputtering. While pronounced surface roughness is observed in films grown on LaSrAlO 4 substrates, films grown on YAlO 3 substrates show atomically flat surfaces, as demonstrated by atomic force microscopy (AFM) and X-ray diffraction (XRD) measurements. The crystalline structure has been confirmed to be monoclinic by symmetric and skew-symmetric XRD. Furthermore, the dependence of the growth modes and the surface morphology on the lattice mismatch is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphological and Surface Structural Changes during Electrochemical Cycling in Li-rich Layered Oxides for Next Generation Li-ion Batteries

Li-rich layered oxides, either as a solid solution or as a nano-composite of layered Li 2 MnO 3 and Li(TM)O 2 (TM=Ni, Co, Mn), draw significant attention as the next-generation cathode materials for high-energy-density Li-ion batteries in electric vehicles. However, there are many issues still unclear, and numerous scientific challenges of these materials that must be overcome to realize their utilization in commercial Li-ion batteries. The first drawback is the irreversible voltage degradation process that limits cycle life. Modified co-precipitation synthesis is introduced to obtain morphology controlled Li-rich material without ammonia addition. This unique design increases meso-structure morphological stability compared with the sample with large secondary particles as proved by Transmission X-ray Microscope. As a result, the voltage decay and capacity loss during long term cycling have been minimized to a large extent. On the other hand, lattice oxygen plays an intriguing role in the electrochemical process of Li-rich material through a reversible redox process as well as an irreversible oxidation with O 2 gas release. To prevent oxygen gas generation, oxygen vacancies have been proposed to form on the surface of the morphology controlled Li-rich layered oxides through the design of a gas-solid interface reaction (GSIR). Dynamic structural changes during the initial two electrochemical cycles of GSIR Li-rich layered oxides are investigated with In operando synchrotron X-ray diffraction (SXRD). Different electrochemical reaction regions dominated by either cations or anions redox are identified in the shifts of the lattice parameters during the first cycle. Changes in lattice parameters, oxygen positions, and microstrain help to explain the lithium de-intercalation mechanism in this class of materials.

Zhang, Minghao↗

High Flux Helium Irradiation of Dispersion-Strengthened Tungsten Alloys and Effects of Heavy Metal Impurity Layer Deposition

Tungsten has been chosen as the plasma-facing material (PFM) for the divertor region in ITER and also a candidate PFM for future plasma-burning nuclear fusion reactors. During fusion device operation, PFMs will be exposed to low-energy He irradiation at high temperatures, resulting in sub-surface bubbles and surface morphology changes such as pores and fuzz. Carbide dispersion-strengthened W materials may enhance the ductility of W, but their behavior under high flux He irradiation remains unclear. In this work, the response of dispersion-strengthened tungsten materials to high flux, low energy He irradiation at high temperature is examined. Tungsten alloyed with 1, 5, or 10 wt. % tantalum carbide or titanium carbide exposed to these conditions result in surface pores, coral-like feature growth and sub-surface helium bubbles. Reactor-relevant helium irradiation (5 x 10 26 m -2 fluence) combined with high powered laser pulses to simulate off-normal reactor events does not significantly alter the surface morphology, as the surface nanostructures appear stable and cracks are only observed on a localized region of one sample. However, specimens show the development of an impurity layer on the surface, likely impurity deposition from the sample holder during irradiation, resulting in a mixed material layer on the surface. Helium bubbles exist in this impurity layer, and obscure conclusions about helium interactions with the carbide dispersoids. Nonetheless, it is clear that the dispersoid microstructure limits He bubble formation and subsequent surface nanostructuring, attributed to the dispersoid composition.

36 MATERIALS SCIENCE↗

Surface-Tailoring and Morphology Control as Strategies for Sustainable Development in Transport Sector

Surface wetting plays an important role in the corrosion protection processes of aerospace applications. Here, we demonstrate the use of ultrafast femtosecond (fs) laser processing techniques to tailor the wetting properties of aluminum (Al) substrates by creating diverse surface morphologies. Specifically, two distinct laser scanning methods—dot-hatching and cross-hatching—were employed to fabricate microstructures on the substrates. By varying the incident laser parameters, we confirmed that the resulting surface morphologies exhibit different wetting behaviors, spanning from hydrophilicity to hydrophobicity. Furthermore, time-resolved spreading tests validate that dynamic wetting behaviors can also be modified. This fs laser processing approach provides a straightforward, one-step fabrication method for effectively modifying the wetting properties of Al alloys.

de Almeida Prado, Luis Antonio Sanchez↗

Controlled Evolution of Morphology and Microstructure in Laser Interference-Structured Zirconia

Tape-cast pseudo-cubic zirconia pellets were surface irradiated by two coherent interfering high-power short-pulse Nd:YAG laser beams. The interfering beams of the third harmonic with a wavelength of 355 nm of a 2.5-ns Q-switched laser produced a line-like intensity distribution with a periodic distance of 3.3 m due to the selected angle between the beams. The resulting nonuniform surface heating produced a microstructure consisting of ultrafine-grained zirconia with a grain size of about 10 nm within the top 100 200 nm depth of the treated surface region due to the high cooling rates during short-pulse laser processing (up to 10^10 K/s). The surface morphology closely followed the microperiodic heat treatment provided by the interfering laser beams. The pore size distribution within the periodic surface morphology ranged from a few nanometers to a maximum of half of the periodic line distances.

36 MATERIALS SCIENCE↗

Surface Reconstruction in Hydrated Amphiphilic Block Copolymer Thin Films Probed by Fluid Cell Atomic Force Microscopy

In many thin film materials, nuanced interplays of interfacial energies control the surface morphology and rearrangement. This work evaluates polymer−solvent interactions and solvent-driven surface reconstructions via ex situ and in situ fluid cell Atomic Force Microscopy (fc-AFM) analysis of amphiphilic block copolymer (BCP) thin films upon exposure to deionized (DI) water. We examine the differences in surface morphology, whole-film swelling, and force response in thin films of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) and polystyrene- block-poly[(allyl glycidyl ether)-co-(ethylene oxide)] (PS-b- P[AGE-co-EO]) processed into standing-up cylinder morphologies perpendicular to a silicon substrate (⊥C). Using Amplitude Modulation AFM (AM-AFM) and Amplitude-Phase Distance (APD) force spectroscopy, this work probes the mechanoresponsive nature of the dynamic surface layers of these films, unveiling surface layer stratification and surface chain rearrangement via minimal tip−sample stimulation. To help rationalize the observed reconfigurations, the energetic driving forces were estimated using the harmonic mean approximations of interfacial energies. Given the nonionizable nature of the minority P(AGE-co-EO) block and the energetic driving forces for chain mobility, this work shows how the elimination of unfavorable PS−water interfaces drives chain rearrangement and coverage of the PS surface by chains of the hydrophilic block. This work highlights considerations for increasing the heterogeneity and complexity of BCP thin films via random blocks and how those changes to local interfacial energies may drive larger scale film morphology reconstructions, with broader implications for tuning interface hydrophilicity.

Copolymers↗

Ionic Liquids as Novel Lubricants and Additives for Diesel Engine Applications

The lubricating properties of two ionic liquids with the same anion but different cations, one ammonium IL [C8H17]3NH.Tf2N and one imidazolium IL C10mim.Tf2N, were evaluated both in neat form and as oil additives. Experiments were conducted using a standardized reciprocating sliding test using a segment of a Cr-plated diesel engine piston ring against a grey cast iron flat specimen with simulated honing marks as on the engine cylinder liner. The selected ionic liquids were benchmarked against conventional hydrocarbon oils. Substantial friction and wear reductions, up to 55% and 34%, respectively, were achieved for the neat ionic liquids compared to a fully-formulated 15W40 engine oil. Adding 5 vol% ILs into mineral oil has demonstrated significant improvement in the lubricity. One blend even outperformed the 15W40 engine oil with 9% lower friction and 34% less wear. Lubrication regime modeling, worn surface morphology examination, and surface chemical analysis were conducted to help understand the lubricating mechanisms for ionic liquids. Results suggest great potential for using ionic liquids as base lubricants or lubricant additives for diesel engine applications.

33 ADVANCED PROPULSION SYSTEMS↗

The effect of morphology and surface composition on radiation resistance of heterogeneous material CdS-PbS

As a result of a complex study of the heterophase photosensitive material CdS-PbS by the methods of scanning electron microscopy and Auger spectrometry, it has been found that the radiation resistance of this material depends on the morphology and phase composition at its surface. It is shown that, as the temperature of annealing is increased, aggregations with predominant content of PbS grow; simultaneously, the composition of these aggregations varies as a consequence of the reaction of substitution of sulfur atoms with oxygen atoms. The latter of the aforementioned processes brings about a decrease in the radiation resistance of the heterophase photosensitive material CdS-PbS, which is accounted for by a decrease in the gettering due to appearance of an intermediate oxidized layer between PbS and CdS. An increase in the sizes and number of spherical aggregations at the surface, which consist of crystallites with predominant content of PbS, brings about an increase in the radiation resistance.

36 MATERIALS SCIENCE↗

Progressive failure site generation in AlGaN/GaN high electron mobility transistors under OFF-state stress: Weibull statistics and temperature dependence

Gate leakage degradation of AlGaN/GaN high electron mobility transistors under OFF-state stress is investigated using a combination of electrical, optical, and surface morphology characterizations. The generation of leakage “hot spots” at the edge of the gate is found to be strongly temperature accelerated. The time for the formation of each failure site follows a Weibull distribution with a shape parameter in the range of 0.7–0.9 from room temperature up to 120 °C. The average leakage per failure site is only weakly temperature dependent. The stress-induced structural degradation at the leakage sites exhibits a temperature dependence in the surface morphology, which is consistent with a surface defect generation process involving temperature-associated changes in the breakdown sites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the morphology and optical properties of anodic oxide layers on InAs (111)III

The effect of the electrolyte composition on the surface morphology and the dispersion dependences of the refractive index and extinction coefficient of {approx}20-nm-thick anodic layers on InAs (111)III substrates is studied by atomic force microscopy and spectral ellipsometry. It is shown that oxidation in electrolytes with different acidities does not modify the surface morphology of the initial InAs substrates. The films formed upon oxidation exhibit close dispersion dependences, despite the difference in the chemical composition between the films. This makes possible the high-precision monitoring of the thickness of anodic layers on InAs substrates by means of ellipsometry with the optical model of a single-layer isotropic film on an absorbing substrate.

36 MATERIALS SCIENCE↗

Emission features and expansion dynamics of nanosecond laser ablation plumes at different ambient pressures

The influence of ambient pressure on the spectral emission features and expansion dynamics of a plasma plume generated on a metal target has been investigated. The plasma plumes were generated by irradiating Cu targets using 6 ns, 1064 nm pulses from a Q-switched Nd:YAG laser. The emission and expansion dynamics of the plasma plumes were studied by varying air ambient pressure levels ranging from vacuum to atmospheric pressure. The ambient pressure levels were found to affect both the line intensities and broadening along with the signal to background and signal to noise ratios and the optimum pressure conditions for analytical applications were evaluated. The characteristic plume parameters were estimated using emission spectroscopy means and noticed that the excitation temperature peaked ∼300 Torr, while the electron density showed a maximum ∼100 Torr. Fast-gated images showed a complex interaction between the plume and background air leading to changes in the plume geometry with pressure as well as time. Surface morphology of irradiated surface showed that the pressure of the ambient gas affects the laser-target coupling significantly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-situ synchrotron micro-diffraction study of surface, interface, grain structure, and strain/stress evolution during Sn whisker/hillock formation

We have performed X-ray synchrotron micro-diffraction measurements to study the processes controlling the formation of hillocks and whiskers in Sn layers on Cu. The studies were done in real-time on Sn layers that were electro-deposited immediately before the X-ray measurements were started. This enabled a region of the sample to be monitored from the as-deposited state until after a hillock feature formed. In addition to measuring the grain orientation and deviatoric strain (via Laue diffraction), the X-ray fluorescence was monitored to quantify the evolution of the Sn surface morphology and the formation of intermetallic compound (IMC) at the Sn-Cu interface. The results capture the simultaneous growth of the feature and the corresponding film stress, grain orientation, and IMC formation. The observations are compared with proposed mechanisms for whisker/hillock growth and nucleation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chemical-looping combustion of coal with metal oxide oxygen carriers

The combustion and reoxidation properties of direct coal chemical-looping combustion (CLC) over CuO, Fe{sub 2}O{sub 3}, CO{sub 3}O{sub 4}, NiO, and Mn{sub 2}O{sub 3} were investigated using thermogravimetric analysis (TGA) and bench-scale fixed-bed flow reactor studies. When coal is heated in either nitrogen or carbon dioxide (CO{sub 2}), 50% of weight loss was observed because of partial pyrolysis, consistent with the proximate analysis. Among various metal oxides evaluated, CuO showed the best reaction properties: CuO can initiate the reduction reaction as low as 500{sup o}C and complete the full combustion at 700{sup o}C. In addition, the reduced copper can be fully reoxidized by air at 700{sup o}C. The combustion products formed during the CLC reaction of the coal/metal oxide mixture are CO{sub 2} and water, while no carbon monoxide was observed. Multicycle TGA tests and bench-scale fixed-bed flow reactor tests strongly supported the feasibility of CLC of coal by using CuO as an oxygen carrier. Scanning electron microscopy (SEM) images of solid reaction products indicated some changes in the surface morphology of a CuO-coal sample after reduction/oxidation reactions at 800 {sup o}C. However, significant surface sintering was not observed. The interactions of fly ash with metal oxides were investigated by X-ray diffraction and thermodynamic analysis. Overall, the results indicated that it is feasible to develop CLC with coal by metal oxides as oxygen carriers. 22 refs., 12 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Etching of SiO{sub 2} in C{sub 4}F{sub 8}/Ar plasmas. II. Simulation of surface roughening and local polymerization

In this article the SiO{sub 2} surface morphology in C{sub 4}F{sub 8}/Ar plasma etching was simulated using a three-dimensional Monte Carlo profile simulator. The complete surface kinetics model was previously developed, incorporated, and tested for accuracy within the simulator as reported in the companion paper [Guo et al., J. Vac. Sci. Technol. A 28, 250 (2010)]. The simulated planar surface roughening at ion incidence angles from 0 deg. to 82 deg. and flux ratios of 5 and 20 were compared to the experimental results that were etched in reactive ion beam experiments and characterized by atomic force microscopy. Distinctively different patterns were obtained with varying ion incidence angle. The surface remained smooth at normal ion incidence up to 45 deg. off-normal and transformed to striations perpendicular to the ion beam at 60 deg. -75 deg. The transverse striation was explained with the local curvature dependence based on the sputtering theory. The surface became smooth again at grazing angle of 82 deg. The simulated transition of surface morphology was qualitatively consistent with the experimental observations. Surface composition was mapped out to disclose the roughening mechanism. At low flux ratio, the surface composition indicated the formation of polymer islands around the roughened area. Greater polymer formation on the shadowed edge of features and enhanced the roughening, in agreement with the micromasking mechanism proposed previously based on other experimental observations. At high flux ratio, the simulation showed a higher extent of polymerization with a uniform distribution. The surface passivation together with other factors led to a smooth surface. The simulated polymer distribution provided insights to the surface roughening process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological transitions on lithium metal anodes.

Coin cells were prepared using a metallic lithium anode, a Li{sub 4}Ti{sub 5}O{sub 12} cathode, and a 1.2 M LiPF{sub 6}/ethylene carbonate:ethyl methyl carbonate (30:70 wt %) electrolyte. The cells were cycled galvanostatically between 1 and 2 V vs Li/Li{sup +} (i=2.0 mA/cm{sup 2}) at a 2C rate. After a specific number of cycles, the cells were disassembled and the morphology of the lithium anode was characterized using scanning electron microscopy. It was observed that the surface morphology of the lithium metal electrode transitioned from a flat and smooth morphology to a microscopically rugged structure that shows three distinct layers: a top dendritic layer, an intermediate porous layer, and a residual metallic lithium layer. Morphological and electrochemical evidence points to the depletion of the electrolyte and the active metallic lithium that reacted to produce the porous layer as the most likely cause of cell failure under the conditions studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and composition of zirconium carbide thin-film grown by ion beam sputtering for optical applications

Thin film of compound material ZrC was deposited on Si (100) wafer using ion beam sputtering method. The deposition was carried out at room temperature and at base pressure of 3×10{sup −5} Pa. X-ray photoelectron spectroscopy (XPS) measurements were performed for determining the surface chemical compositions. Grazing incidence x-ray reflectivity (GIXRR) measurements were performed to study the film thickness, roughness and density. From GIXRR curve roughness value of the film was found less than 1 nm indicating smooth surface morphology. Films density was found 6.51 g/cm{sup 3}, which is close to bulk density. Atomic force microscopy (AFM) measurements were performed to check the surface morphology. AFM investigation showed that the film surface is smooth, which corroborate the GIXRR data. Figure 2 of the original article PDF file, as supplied to AIP Publishing, contained a PDF processing error. This article was updated on 12 May 2014 to correct that error.

36 MATERIALS SCIENCE↗

Investigation of process history and underlying phenomena associated with the synthesis of plutonium oxides using Vector Quantizing Variational Autoencoder

Accurate, high throughput, and unbiased analysis of plutonium oxide particles is needed for analysis of the phenomenology associated with process parameters in their synthesis. Compared to qualitative and taxonomic descriptors, quantitative descriptors of particle morphology through scanning electron microscopy (SEM) have shown success in analyzing process parameters of uranium oxides. Among other candidates, a neural network called a Vector Quantizing Variational Autoencoder (VQ-VAE) has shown the ability to quantitatively describe particle morphology to attain >85% accuracy in identifying uranium oxide processing routes. We utilize a VQ-VAE to quantitatively describe plutonium dioxide (PuO 2 ) particles created in a designed experiment and investigate their phenomenology and prediction of their process parameters. PuO 2 was calcined from Pu(III) oxalates that were precipitated under varying synthetic conditions that related to concentrations, temperature, addition and digestion times, precipitant feed, and strike order; the surface morphology of the resulting PuO 2 powders were analyzed by SEM. A pipeline was developed to extract and quantify useful image representations for individual particles with the VQ-VAE, then further reduce the dimensionality of the feature space using a bottlenecking neural network fit to perform multiple classification tasks simultaneously. The reduced feature space could predict process parameters with greater than 80% accuracies for some parameters with a single particle. They also showed utility for grouping particles with similar surface morphology characteristics together. Both the clustering and classification results reveal valuable information regarding which chemical process parameters chiefly influence the PuO 2 particle morphologies: strike order and oxalic acid feedstock. Doing the same analysis with multiple particles was shown to improve the classification accuracy on each process parameter over the use of a single particle, with statistically significant results generally seen with as few as four particles in a sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple Surface Plasmon Modes for a Colloidal Solution of Nanoporous Gold Nanorods and Their Comparison to Smooth Gold Nanorods

The paper represents a novel approach to investigating localized surface plasmon (LSP) resonance modes of nanoporous Au nanorods (NRs) in a solution phase with control over surface morphology. Au NRs, which have distinctive features such as nanopores and ligaments, showed interesting LSP resonance modes depending on the surface morphology and the total length of the structure. Compared with the analogous smooth surface NRs, the LSP modes of nanoporous NRs are red-shifted, which can be interpreted as a longer effective rod length and larger amplitude of plasmon oscillation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗