Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Spectral evidence for a carbonaceous chondrite surface composition on Deimos

The surface compositions of Phobos and Deimos as determined by their UV-visible reflectance are compared in order to evaluate the hypothesis that the different surface morphologies of the two satellites are due to different mechanical properties. The UV-visible reflectance spectrum of Deimos is compiled from Mariner 9 UV spectrometry and Canopus star tracker photometry and ground-based colorimetry and polarimetry; the geometric albedo of Deimos is determined from Mariner 9 Canopus star tracker data. The reflectance spectra of Deimos and Phobos are found to be similar in a first approximation, exhibiting low, flat reflectivities in the visible and dropping off sharply in the UV, compatible with a probable carbonaceous chondrite nature for Deimos as well as Phobos and suggesting that their different surface morphologies are most likely due to different orbital histories.

Pang, K. D.↗
DOE OSTI2019

Protective Performance of Plasma-Enhanced Chemical Vapor-Deposited Ethyl Cyclohexane Coating on Magnesium Alloys

In the present investigation, plasma-polymerized ethyl cyclohexane (ECH) coatings were deposited onto AZ31 and AM50 magnesium (Mg) alloys using plasma-enhanced chemical vapor deposition. The influences of deposition time on the coating formation, surface morphology, chemical composition and electrochemical corrosion behavior were investigated. The coating deposition was confirmed by infrared spectroscopy (FT-IR), and the thickness was measured using a scanning electron microscope. Energy-dispersive x-ray analysis revealed an increase in carbon and a decrease in Mg concentrations as the coating duration was increased. Electrochemical impedance spectroscopy (EIS) results confirmed an improvement in the corrosion resistance of AZ31 and AM50 alloys due to ECH coatings in the presence of a 3.5 wt.% NaCl solution. Further, equivalent circuit curve fitting analysis of the EIS results indicated an increase in charge transfer resistance (R{sub ct}) values with longer coating durations. These results confirmed the protecting ability of ECH coatings against corrosive ion attack, which was also substantiated by the surface morphologies after corrosion. Impedance values decreased as the duration of exposure in a NaCl solution increased, and the coating prepared using a 30-min ECH deposition exhibited better protection properties.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Taylor instability in rhyolite lava flows

A refined Taylor instability model is developed to describe the surface morphology of rhyolite lava flows. The effect of the downslope flow of the lava on the structures resulting from the Taylor instability mechanism is considered. Squire's (1933) transformation is developed for this flow in order to extend the results to three-dimensional modes. This permits assessing why ridges thought to arise from the Taylor instability mechanism are preferentially oriented transverse to the direction of lava flow. Measured diapir and ridge spacings for the Little and Big Glass Mountain rhyolite flows in northern California are used in conjunction with the model in order to explore the implications of the Taylor instability for flow emplacement. The model suggests additional lava flow features that can be measured in order to test whether the Taylor instability mechanism has influenced the flows surface morphology.

Baum, B. A.↗
NASA NTRS2012

Transmission Electron Microscopy (TEM) Sample Preparation of Si(1-x)Gex in c-Plane Sapphire Substrate

The National Aeronautics and Space Administration-invented X-ray diffraction (XRD) methods, including the total defect density measurement method and the spatial wafer mapping method, have confirmed super hetero epitaxy growth for rhombohedral single crystalline silicon germanium (Si1-xGex) on a c-plane sapphire substrate. However, the XRD method cannot observe the surface morphology or roughness because of the method s limited resolution. Therefore the authors used transmission electron microscopy (TEM) with samples prepared in two ways, the focused ion beam (FIB) method and the tripod method to study the structure between Si1-xGex and sapphire substrate and Si1?xGex itself. The sample preparation for TEM should be as fast as possible so that the sample should contain few or no artifacts induced by the preparation. The standard sample preparation method of mechanical polishing often requires a relatively long ion milling time (several hours), which increases the probability of inducing defects into the sample. The TEM sampling of the Si1-xGex on sapphire is also difficult because of the sapphire s high hardness and mechanical instability. The FIB method and the tripod method eliminate both problems when performing a cross-section TEM sampling of Si1-xGex on c-plane sapphire, which shows the surface morphology, the interface between film and substrate, and the crystal structure of the film. This paper explains the FIB sampling method and the tripod sampling method, and why sampling Si1-xGex, on a sapphire substrate with TEM, is necessary.

Kim, Hyun Jung↗
DOE OSTI2018

Tribological Behavior of Electrochemically Etched AISI 316 Stainless Steel with a Textured Surface

In this work, AISI 316 stainless steel (316 SS) was electrochemically etched in four NaCl solutions (10, 15, 20, and 25 wt.%) to form textured surfaces. Surface morphologies, three-dimensional surface topographies, and surface profiles of the textured 316 SS samples were obtained by scanning electron microscopy (SEM) and laser scanning confocal microscope (LSCM). Sliding friction tests of the textured 316 SS samples were conducted in air and under grease lubrication. The results suggested that the variable degrees of microtextured surfaces after electrochemical etching in 10, 15, and 20 wt.% NaCl solutions. The 316 SS samples etched in 15 and 20 wt.% NaCl solutions showed more promising tribological performance than other samples, as reflected by their friction coefficients, mass loss per unit distance traveled (mg/m), and wear morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The limiting layer of fish scales: structure and properties

Fish scales serve as a flexible natural armor that have received increasing attention across the materials community. Most efforts in this area have focused on the composite structure of the predominately organic elasmodine, and limited work addresses the highly mineralized external portion known as the Limiting Layer (LL). This coating serves as the first barrier to external threats and plays an important role in resisting puncture. In this investigation the structure, composition and mechanical behavior of the LL were explored for three different fish, including the arapaima (Arapaima gigas), the tarpon (Megalops atlanticus) and the carp (Cyprinus carpio). The scales of these three fish have received the most attention within the materials community. Features of the LL were evaluated with respect to anatomical position to distinguish site-specific functional differences. Results show that there are significant differences in the surface morphology of the LL from posterior and anterior regions in the scales, and between the three fish species. The calcium to phosphorus ratio and the mineral to collagen ratios of the LL are not equivalent among the three fish. Results from nanoindentation showed that the LL of tarpon scales is the hardest, followed by the carp and the arapaima and the differences in hardness are related to the apatite structure, possibly induced by the growth rate and environment of each fish.

Arola, Dwayne D.↗
DOE OSTI2016

Amidine-Mediated Zwitterionic Ring-Opening Polymerization of N -Alkyl N -Carboxyanhydride: Mechanism, Kinetics, and Architecture Elucidation

Zwitterionic ring-opening polymerization (ZROP) of N-butyl N-carboxyanhydrides (Bu-NCAs) has been investigated using 1,8-diazabicycloundec-7-ene (DBU), a bicyclic amidine initiator. It was found that poly(N-butylglycine)s (PNBGs) with molecular weight (M n ) in the 3.5–32.4 kg mol –1 range and polydispersity index (PDI) in the 1.02–1.12 range can be readily obtained by systematically varying the initial monomer to initiator feed ratio. The polymerization exhibits characteristics of a controlled polymerization, as evidenced by the linear increase of polymer molecular weight with conversion and the successful enchainment experiments. Kinetic studies revealed that the reaction is first-order dependent on the monomer and the DBU concentration. The rate of initiation is comparable to that of the propagation. Random copolypeptoids of poly[(N-propargylglycine)-r-(N-butylglycine)]s [P(NPgG-r-NBG)s] were also synthesized by DBU-mediated copolymerization of Bu-NCA and N-propargyl N-carboxyanhydride (Pg-NCA). Subsequent grafting with azido-terminated poly(ethylene glycol) (PEG) produces bottlebrush copolymers. Analysis of bottlebrush copolymer samples using atomic force microscopy (AFM) revealed a surface morphology of toroid-shaped nanostructures, consistent with the polypeptoid backbone having cyclic architecture. Here, small-angle neutron scattering (SANS) characterization of the bottlebrush polymer ensemble in solution also confirms the cyclic architecture of the polypeptoid backbones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Non-isothermal Crystallization and Degradation Kinetics of Fe{sub 3}O{sub 4}–Thymolblue Functionalized Poly(ε-caprolactone)

The Fe{sub 3}O{sub 4}–thymolblue (TB) functionalized or end capped poly(ε-caprolactone) (PCL) was synthesized by ring opening polymerization (ROP) of ε-caprolactone (CL) with Fe{sub 3}O{sub 4}–TB nanohybrid as an effective initiator in the presence of stannous octoate (SO) as a catalyst. The main aim of the present work is to analyze the influence of polymer chain end capping agent or functionalization agent on the structure–property relationship particularly, crystallization and thermal degradation behavior of PCL under non-isothermal condition. The structure of the polymer was analyzed using FTIR and NMR spectra. The particle size of the incorporated Fe{sub 3}O{sub 4}–TB nanohybrid in PCL matrix was found to be less than 20 nm by TEM. The surface morphology, skewness moment and surface roughness were analysed by AFM. The spherulitic growth of the nucleated polymer crystals was confirmed by POM. The spherulitic growth was further verified with various kinetic models. The melting and crystallization behaviors under non-isothermal condition were assessed by DSC. Various kinetic models were employed to comprehend the degradation behavior of Fe{sub 3}O{sub 4}–TB functionalized PCL and its associated kinetic parameters under non-isothermal condition. The energy of activation (E{sub a}) for the crystallization and thermal degradation of PCL were found to be 132 and nearly 140 kJ/mol respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Annealing on Perpendicular Magnetic Anisotropy and Low Saturation Magnetization of MgO/Co{sub 2}FeAl/Mo Trilayer Films

In this study, we report our approach to manipulate the strength of perpendicular magnetic anisotropy (PMA) at oxide/ferromagnetic metal of Heusler alloy (HA) interface by tuning the parameter of annealing temperature. Robust PMA energy density (K{sub eff}) of ∼ 0.43 × 10{sup 6} erg/cm{sup 3} and small saturation magnetization (M{sub s}) as low as ∼ 248 emu/cm{sup 3} have been achieved for MgO/Co{sub 2}FeAl (CFA)/Mo stacks at 400 {sup ∘}C. We identify that PMA energy is thermally stable up to the maximum temperature of 400 {sup ∘}C. Effect of annealing temperature on surface morphology, grain distribution, and surface roughness of the stacks are investigated by atomic force microscopy (AFM). Further, X-ray photoelectron spectroscopy (XPS) study demonstrates that the interfacial oxidation decides the strong PMA property at MgO/Co{sub 2}FeAl interface during the annealing process. This MgO/CFA/Mo trilayer system can be a suitable candidate for the development of low-power consumption, huge-density data storage, high-thermal stability against the annealing temperature, and nonvolatile magnetic memories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Improving Corrosion Resistance of 316L Austenitic Stainless Steel Using ZrO{sub 2} Sol-Gel Coating in Nitric Acid Solution

In this study, thin-film coating of zirconium oxide (ZrO{sub 2}) was prepared by sol-gel method and subsequent heat treatment process. The sol was prepared by controlled hydrolysis of zirconium tetrapropoxide using acetic acid and ethanol/acetylacetone mixture as catalyst and chelating agent, respectively, and finally deposited onto the 316L austenitic stainless steel (316L SS) using dip coating method in order to improve its corrosion resistance in nitric acid medium. The composition, structure, and morphology of the coated surface were investigated by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The obtained results from XRD and FTIR state the formation of tetragonal and monoclinic ZrO{sub 2} phase. Also, the obtained results from surface morphology investigation by SEM and AFM indicate the formation of smooth, homogeneous and uniform coatings on the steel substrate. Then, the corrosion behavior of stainless steel was investigated in a 1 and 10 M nitric acid solutions using electrochemical impedance spectroscopy and linear polarization test. The obtained results from these tests for ZrO{sub 2}-coated specimens indicated a considerable improvement in the corrosion resistance of 316L stainless steel by an increase in corrosion potential and transpassive potential, and a decrease in passive current density and corrosion current density. The decrease in passive current density in both the concentration of solutions was two orders of magnitude from bare to coated specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stable Rate of Slip Along the Karakax Section of the Altyn Tagh Fault from Observation of Interglacial and Postglacial Offset Morphology and Surface Dating

Digital elevation maps obtained using TanDEM-X and Pleiades data combined with newly obtained surface age estimates using cosmogenic radionuclide (CRN) and optically simulated luminescence (OSL) methods are used to quantify the slip rate along the western section of the Altyn Tagh Fault in southern Xinjiang. The reconstruction of the conical shape of massive alluvial fans inferred to be from the Eemian (115±7 ka) from CRN dating shows consistent left-lateral offsets of 300±20 m, yielding a slip rate of 2.6±0.3 mm/year. Successive episodes of incision have left cut terraces inset in wide canyons, 10–25 m below the fans' surface. The incision was followed by the deposition of a broad terrace of early Holocene age, which is reincised by modern stream channels. Near the village of Shanxili, a 200 m wide valley is partially dammed by a shutter ridge displaced by the fault. A fill terrace deposited upstream from the ridge has an OSL age of 8.8±0.6 ka. The 23±2 m offset of the riser incising the terrace indicates a minimum postdepositional movement on the fault, yielding a Holocene rate of 2.6±0.5 mm/year, consistent with the 115-ka average slip rate. Furthermore, scarp degradation analysis using mass diffusion reveals a nonlinear relationship between fault displacement and degradation coefficient along the progressively exposed fault scarp, a pattern suggesting either seismic clustering or variable diffusion rate since the Eemian. Together with the Gozha Co-Longmu Co fault to the south, the Karakax section of the Altyn Tagh Fault contributes to the eastward movement of the western corner of Tibet.

58 GEOSCIENCES↗
DOE OSTI2016

Surface patterning of nanoparticles with polymer patches

Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest. Surface-patterned particles act as colloidal analogues of atoms and molecules serve as model systems in studies of phase transitions in liquid systems, behave as ‘colloidal surfactants’ and function as templates for the synthesis of hybrid particles. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties. At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles and nanoparticles with surface ripples or a ‘raspberry’ surface morphology. We demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. Furthermore, these patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Growth kinetics and island evolution during double-pulsed molecular beam epitaxy of InN

The kinetic processes of InN growth using alternating source fluxes with sub-monolayer In pulses in plasma-assisted molecular beam epitaxy have been investigated. Growth at various temperatures reveals the existence of two growth regimes. While growth at low temperatures is solely governed by surface diffusion, a combination of decomposition, desorption, and diffusion becomes decisive at growth temperatures of 470 °C and above. At this critical temperature, the surface morphology changes from a grainy structure to a structure made of huge islands. The formation of those islands is attributed to the development of an indium adlayer, which can be observed via reflection high energy electron diffraction monitoring. Based on the growth experiments conducted at temperatures below T{sub Growth} = 470 °C, an activation energy for diffusion of 0.54 ± 0.02 eV has been determined from the decreasing InN island density. A comparison between growth on metalorganic vapor phase epitaxy GaN templates and pseudo bulk GaN indicates that step edges and dislocations are favorable nucleation sites. Based on the results, we developed a growth model, which describes the main mechanisms of the growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Modeling Helium Segregation to the Surfaces of Plasma-Exposed Tungsten as a Function of Temperature and Surface Orientation

We provide a description of the dependence on surface crystallographic orientation and temperature of the segregation of helium implanted with energies consistent with low-energy plasma exposure to tungsten surfaces. Here, we describe multiscale modeling results based on a hierarchical approach to scale bridging that incorporates atomistic studies based on a reliable interatomic potential to parameterize a spatially dependent drift-diffusion-reaction cluster-dynamics code. An extensive set of molecular dynamics (MD) simulations has been performed at 933 K and/or 1200 K to determine the probabilities of desorption and modified trap mutation that occurs as small, mobile Hen (1 ≤ n ≤ 7) clusters diffuse from the near-surface region toward surfaces of varying crystallographic orientation due to an elastic interaction force that provides the thermodynamic driving force for surface segregation. These near-surface cluster dynamics have significant effects on the surface morphology, the near-surface defect structures, and the amount of helium retained in the material upon plasma exposure, for which we have developed an extensive MD database of cumulative evolution during high-flux helium implantation at 933 K, which we compare to our properly parameterized cluster-dynamics model. This validated model is then used to evaluate the effects of temperature on helium retention and subsurface helium clustering.

Blondel, Sophie↗
NASA NTRS1974

Morphology and surface mapping

Of the many boulders photographed at the Apollo 17 site, boulder 1 from Station 2 is unique in having a strongly developed foliation. Resistant layers form four steeply inclined ridges separated by joint planes or by deeply eroded beds of softer materials. A prominent cleavage, or set of cross joints, is oriented almost normal to the foliation. The cleavage is expressed as subparallel cracks, some of which are open fissures. The entire surface of the boulder is rough and studded by dark colored knobs ranging in diameter from 1 to 15 cm. It is a polymict breccia containing at least one type of rock that has not been recognized in any other lunar sample, and it records an unusual minor element distribution and magnetic history.

Marvin, U. B.↗
NASA NTRS2004

Notes on Interface Growth Kinetics 50 Years after Burton, Cabrera and Frank

This overview is devoted to some unresolved basic problems in crystal growth kinetics. The density wave approach to propagation of a spatially diffuse interface between a growing crystal and its simple (e.g., metallic) melt is discussed is Section 2. This approach allows for the calculation of kinetic coefficients and is an alternative to the localized interface concept in which each atom belongs to either a solid or a liquid. Sections 3 and 4 deals mainly with layer growth from solution. Mutual retardation of the growth steps via their bulk and d a c e diffusion fields is the major subject. The influence of solution flow on step bunching (Section 4) suggests the essential influence of bulk diffusion on the surface morphology. The flow within the solution boundary layer enhances step-step interaction, influences the step bunching process and the resulting step pattern morphology on the growing surface. Recent experiments on the rates at which strongly polygonized steps on protein and small molecule crystals propagate during growth from solution are analyzed in Section 5 . We have shown that the step segments may be "singular" and that "one-dimensional nucleation" may be the rate limiting stage for the segments that are shorter or comparable in length to the thermodynamically equilibrium interlink distance. In this case, the reciprocal dependence of the segment propagation rate on the segment length that follow from the Gibbs-Thompson law, should be replaced by an abrupt switch from zero to a finite constant velocity. Until recently, the Kossel crystal remained the only model used in crystal growth theory. In such Kossel Gibbs-Thomson law, should be replaced by an abrupt switch &om zero to a finite constant velocity. crystals, all kinks at the steps are identical and the kink rate is a linear function of the supersaturation. In the non-Kossel crystals, there may be several kink configurations characterized by different geometries and energies. These configurations should appear in a specific sequence when each new lattice unit cell is filled. As a result of such a cooperative interaction within the unit cell, a non-linear dependence of the kink rate on the vapor pressure or solution concentration in excess over the equilibrium value should be expected.

Chernov, A. A.↗
NASA NTRS1996

Morphology and Surface Areas of Thin Ice Films

Thin ice films formed by deposition from the vapor phase in a fast flow-tube reactor have been used to simulate polar stratospheric cloud surfaces in order to obtain laboratory data on uptake and heterogeneous reaction rates.

ice ozone depletion ice films polar stratopsheric ↗