SEARCH · Search NASA

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Rough surface scattering results based on bandpass autocorrelation forms

Surface-height autocorrelation forms such as Gaussian and exponential are often used in studies of near-normal incidence rough-surface scattering. Such models require the existence of a constant, or DC, value in the spectrum. The consequences of autocorrelation forms that correspond to spectral processes that are essentially bandpass in nature are examined. One such process is that of ocean wind waves. In this case, the spectral components do not extend down to zero frequency. The physical optics backscatter theory is reexamined relative to such autocorrelation functions. Experimental results obtained from a wavetank are compared to the autocorrelation model used in the analysis. The analysis indicates that Gaussian correlation length or mean-square slope is not an appropriate parameter for narrowband conditions and that significant slope is a more relevant parameter. Inherent in the deep-phase assumption is some form of slope dependency. The analysis given (and variants thereof) can be used to provide insight into the physical effects of separate spectral components and of spectral directionality.

Miller, Lee S.↗

NASA NTRS1990

A rough-surface thermophysical model for airless planets

A model for determining diurnal temperatures in spherical-section depressions and which encompasses both subsurface heat-flow and direct and scattered sunlight effects is presently applied to the disk-integrated thermal emission of a rough planetary surface with nonzero thermal inertia. Attention is given to the variation with roughness and thermal inertia of the beaming parameter eta, which characterizes zero-phase thermal emission by comparison with a smooth, nonrotating body and is almost independent of albedo for a given surface roughness. The thermal phase curve of Ceres is noted to be well matched by the model features of (1) prograde rotation, (2) 44-deg rms surface slope, and (3) a thermal inertia that is 30 percent of the lunar value.

Spencer, John R.↗

NASA NTRS1981

The relationship among sea surface roughness variations, oceanographic analyses, and airborne remote sensing analyses

The synthetic aperture radar (SAR) was studied to determine whether it could image large scale estuaries and oceanic features such as fronts and to explain the electromagnetic interaction between SAR and the individual surface front features. Fronts were observed to occur at the entrance to the Chesapeake Bay. The airborne measurements consisted of data collection by SAR onboard an F-4 aircraft and real aperture side looking radar (SLAR) in Mohawk aircraft. A total of 89 transects were flown. Surface roughness and color as well as temperature and salinity were evaluated. Cross-frontal surveys were made. Frontal shear and convergence flow were obtained. Surface active organic materials, it was indicated, are present at the air-sea interface. In all, 2000 analyses were conducted to characterize the spatial and temporal variabilities associated with water mass boundaries.

Oertel, G. F.↗

NASA NTRS1971

Mapping sea-surface roughness using microwave radiometry.

Microwave radiometry data (1.55 cm) taken by aircraft over the Salton Sea have been corrected for viewing angle and atmospheric effects, rectified, and mapped. No fetch-limited conditions are observed along the upwind shore despite a 15 m/sec wind, which indicates that the radiometer is sensitive to the short wavelength surface roughness but not to the longer wavelengths. The brightness temperature field can be represented as a nearly linear function of the surface wind speed.

Strong, A. E.↗

NASA NTRS1982

A multi-frequency measurement of thermal microwave emission from soils - The effect of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July September of 1981. Three bare fields with different surface roughneses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depth of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz. Previously announced in STAR as N82-24550

Wang, J. R.↗

NASA NTRS1986

Modeling of transition and surface roughness effects in boundary-layer flows

Experiments were carried out to examine the influence of three-dimensional, stochastic roughness on the growth of incompressible turbulent boundary layers, as well as the effect of streamwise pressure gradients and freestream turbulence intensity on smooth-wall boundary-layer transition. The modeling of these effects in a two-dimensional boundary-layer computation program was examined with the help of the experiments. A model for surface roughness was developed that relates directly measurable statistical parameters quantifying the roughness geometry to the aerodynamic effects. This model should be valid for a limited class of surfaces found on turbomachinery blading and in other engineering applications. Commonly used criteria for the transition onset performed poorly and presumably need to be modified to account for other factors influencing the process.

Feiereisen, W. J.↗

NASA NTRS1992

Estimates of surface roughness derived from synthetic aperture radar (SAR) data

Radar remote sensing data provide a unique perspective of the earth's crust and the processes that have influenced its evolution. Physically based models are required, however, to relate the geophysical quantities being measured by the radar sensor to useful geologic information. In this study, synthetic aperture radar (SAR) data over the Cima volcanic field in the Mojave Desert of California are quantitatively connected with microtopography through inversion of a radar backscatter model. Changes in surface roughness inferred from the derived microtopography are modeled and found to be consistent with aeolian mantling as surfaces age. Estimated rates of aeolian deposition for the Cima area are compared to the Lunar Crater volcanic field in Nevada. Rates of deposition appear to be higher at Cima volcanic field, most likely because of its proximity to Soda Lake, the main source of the aeolian material.

Evans, Diane L.↗

NASA NTRSDate not supplied

Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness

The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.

Mars Sample Return↗

NASA NTRSDate not supplied

Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness

Mars Sample Return↗

NASA NTRS1994

Surface roughness measurements

The Optics Division is currently in the research phase of producing grazing-incidence mirrors to be used in x-ray detector applications. The traditional method of construction involves labor-intensive glass grinding. This also culminates in a relatively heavy mirror. For lower resolution applications, the mirrors may be of a replicated design which involves milling a mandrel as a negative of the final shape and electroplating the cylindrical mirror onto it. The mirror is then separated from the mandrel by cooling. The mandrel will shrink more than the 'shell' (mirror) allowing it to be pulled from the mandrel. Ulmer (2) describes this technique and its variations in more detail. To date, several mirrors have been tested at MSFC by the Optical Fabrication Branch by focusing x-ray energy onto a detector with limited success. Little is known about the surface roughness of the actual mirror. Hence, the attempt to gather data on these surfaces. The test involves profiling the surface of a sample, replicating the surface as described above, and then profiling the replicated surface.

Howard, Thomas G.↗

NASA NTRS1989

The effects of Reynolds number, rotor incidence angle, and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage

A combined experimental and computational program was conducted to examine the heat transfer distribution in a turbine rotor passage geometrically similiar to the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Heat transfer was measured and computed for both the full-span suction and pressure surfaces of the rotor airfoil as well as for the hub endwall surface. The primary objective of the program was to provide a benchmark-quality data base for the assessment of rotor passage heat transfer computational procedures. The experimental portion of the study was conducted in a large-scale, ambient temperature, rotating turbine model. Heat transfer data were obtained using thermocouple and liquid-crystal techniques to measure temperature distributions on the thin, electrically-heated skin of the rotor passage model. Test data were obtained for various combinations of Reynolds number, rotor incidence angle and model surface roughness. The data are reported in the form of contour maps of Stanton number. These heat distribution maps revealed numerous local effects produced by the three-dimensional flows within the rotor passage. Of particular importance were regions of local enhancement produced on the airfoil suction surface by the main-passage and tip-leakage vortices and on the hub endwall by the leading-edge horseshoe vortex system. The computational portion consisted of the application of a well-posed parabolized Navier-Stokes analysis to the calculation of the three-dimensional viscous flow through ducts simulating the a gas turbine passage. These cases include a 90 deg turning duct, a gas turbine cascade simulating a stator passage, and a gas turbine rotor passage including Coriolis forces. The calculated results were evaluated using experimental data of the three-dimensional velocity fields, wall static pressures, and wall heat transfer on the suction surface of the turbine airfoil and on the end wall. Particular attention was paid to an accurate modeling of the passage vortex and to the development of the wall boundary layers including crossflow.

Blair, Michael F.↗

NASA NTRS2001

Subsurface Sounding of Mars: The Effects of Surface Roughness

The Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS) will conduct a global survey of Mars from the Mars Express Orbiter starting in 2004. The primary objective of the subsurface observations is to detect material interfaces in the upper several kilometers of the crust of Mars, with a particular emphasis on mapping the 3D distribution of water and ice in that portion of the crust. In order to detect subsurface interfaces, the returned echo from the subsurface must be distinguished from noise and clutter, which can arise from a variety of sources. One source of clutter is surface topography that generates backscattered energy at the same time delay as the subsurface region of interest. Surface topography can affect the detectability of subsurface features in several other ways. Surface roughness at scales comparable or somewhat smaller than the radar wavelength reduces the coherency of the wave as it passes the upper interface. Also, surface slope (tilt) at scales of the radar footprint and larger (> 5 km) affects the apparent Doppler signature of the echoes, and effectively disperses the wave transmitted into the subsurface, making processing and interpretation difficult. In this paper, we report on the roughness characteristics of Mars at these various scales as measured by the Mars Global Surveyor Laser Altimeter (MOLA), and consider the implications for achieving the subsurface sounding goals of MARSIS. Additional information is contained in the original extended abstract.

Plaut, J. J.↗

NASA NTRS1984

Influence of surface roughness of a desert

A numerical simulation study, using the current GLAS climate GCM, was carried out to examine the influence of low bulk aerodynamic drag parameter in the deserts. The results illustrate the importance of yet another feedback effect of a desert on itself, that is produced by the reduction in surface roughness height of land once the vegetation dies and desert forms. Apart from affecting the moisture convergence, low bulk transport coefficients of a desert lead to enhanced longwave cooling and sinking which together reduce precipitation by Charney's (1975) mechanism. Thus, this effect, together with albedo and soil moisture influence, perpetuate a desert condition through its geophysical feedback effect. The study further suggests that man made deserts is a viable hypothesis.

Sud, Y. C.↗

NASA NTRS1962

SURFACE ROUGHNESS OF THE MOON

Description of lunar surface from radar lunar echoes with definition of roughness based on statistical properties of a surface

RADAR CROSS SECTION↗

NASA NTRS2006

Laser Peening and Shot Peening Effects on Fatigue Life and Surface Roughness of Friction Stir Welded 7075-T7351 Aluminum

The effects of laser peening, shot peening, and a combination of both on the fatigue life of Friction Stir Welds (FSW) was investigated. The fatigue samples consisted of dog bone specimens and the loading was applied in a direction perpendicular to the weld direction. Several laser peening conditions with different intensities, durations, and peening order were tested to obtain the optimum peening parameters. The surface roughness resulting from various peening techniques was assessed and characterized. The results indicate a significant increase in fatigue life using laser peening compared to shot peened versus their native welded specimens.

Hatamleh, Omar↗

NASA NTRS1976

Saltation threshold on Mars - The effect of interparticle force, surface roughness, and low atmospheric density

Results are reported for wind-tunnel experiments performed to determine the threshold friction speed of particles with different densities. Experimentally determined threshold speeds are plotted as a function of particle diameter and in terms of threshold parameter vs particle friction Reynolds number. The curves are compared with those of previous experiments, and an A-B curve is plotted to show differences in threshold speed due to differences in size distributions and particle shapes. Effects of particle diameter are investigated, an expression for threshold speed is derived by considering the equilibrium forces acting on a single particle, and other approximately valid expressions are evaluated. It is shown that the assumption of universality of the A-B curve is in error at very low pressures for small particles and that only predictions which take account of both Reynolds number and effects of interparticle forces yield reasonable agreement with experimental data. Effects of nonerodible surface roughness are examined, and threshold speeds computed with allowance for this factor are compared with experimental values. Threshold friction speeds on Mars are then estimated for a surface pressure of 5 mbar, taking into account all the factors considered.

Iversen, J. D.↗

NASA NTRS2011

The Effects of Surface Roughness on the NEAR XRS Elemental Results: Monte-Carlo Modeling

The objective of the NEAR-Shoemaker X-ray Gamma-Ray Spec1roscopy ("XGRS") investigation was to determine the elemental composition of the near-Earth asteroid 433 Eros. The X-ray Spectrometer (XRS) system measured the characteristic fluorescence of six major elements (Mg, Al, Si, S, Ca, Fe) in the 1-10 keV energy range excited by the interaction of solar X-rays with the upper 100 microns of the surface of 433 Eros. Various investigators, using both laboratory experiments and computer simulations have established that X-ray fluorescent line ratios can be influenced by small-scale surface roughness at high incidence or emission angles. The effect on the line ratio is specific to the geometry, excitation spectrum, and composition involved, In general, however, the effect is only substantial for ratios of lines with a significant energy difference between them: Fe/Si and Ca/Si are much more likely to be affected than AI/Si or Mg/Si. We apply a Monte-Carlo code to the specific geometry and spectrum of a major NEAR XRS solar flare observation, using an H chondrite composition as the substrate. The seventeen most abundant elements were included in the composition model, from oxygen to titanium.

Lin, Lucy F.↗

DOE OSTI2025

Mediation of Colloidal Encounter Dynamics by Surface Roughness

Rigorous understanding on the self-assembly of colloidal nanocrystals is crucial to develop tailored nanostructured materials for energy storage, sensing, and optical fields. Despite extensive studies on the self-assembly, a mechanistic understanding of self-assembly under an external field still remains an ongoing challenge. Here, in this work, we used optical tweezers that impose an external attractive force field, resulting in the self-assembly of alpha-phase sodium yttrium fluoride nanocrystals. The dynamic force that is strongly dependent on the surface roughness of the nanocrystals is shown to be a decisive factor for a direct contact between the nanocrystals, manifested by the roughness-dependent hydrodynamic resistivity and Langevin dynamic simulations. Our study provides direct evidence that the role of dynamics is equally important in understanding the self-assembly, which has been rarely observed in the self-assembly in contrast with many studies on the equilibrium forces. These results may have further impact in other fields, such as having explanatory power for the probability of nonclassical crystal growth or the structure of viral spike proteins that affect the probability of viruses binding with cells.

Felsted, Robert G. [Univ. of Washington, Seattle, ↗