Search NASA⌕ Search

SEARCH · Search NASA

Results for “technical advance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Development of Management Metrics for Research and Technology

Professor Ted Sheskin from CSU will be tasked to research and investigate metrics that can be used to determine the technical progress for advanced development and research tasks. These metrics will be implemented in a software environment that hosts engineering design, analysis and management tools to be used to support power system and component research work at GRC. Professor Sheskin is an Industrial Engineer and has been involved in issues related to management of engineering tasks and will use his knowledge from this area to allow extrapolation into the research and technology management area. Over the course of the summer, Professor Sheskin will develop a bibliography of management papers covering current management methods that may be applicable to research management. At the completion of the summer work we expect to have him recommend a metric system to be reviewed prior to implementation in the software environment. This task has been discussed with Professor Sheskin and some review material has already been given to him.

Sheskin, Theodore J.↗
NASA NTRS2011

PRSEUS Development for the Hybrid Wing Body Aircraft

NASA has created the Environmentally Responsible Aviation (ERA) Project to explore and document the feasibility, benefits and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift to drag ratios, reduced drag, and lower community noise. The primary structural concept being developed for the Hybrid Wing Body aircraft design under the ERA project in the Airframe Technology element is the PRSEUS concept. This paper describes how researchers at NASA and Boeing are working together to develop fundamental PRSEUS technologies that could someday be implemented on a transport size HWB airplane design.

Velicki, Alex↗
NASA NTRS2012

Atmospheric Reanalyses-Recent Progress and Prospects for the Future. A Report from a Technical Workshop, April 2010

In April 2010, developers representing each of the major reanalysis centers met at Goddard Space Flight Center to discuss technical issues - system advances and lessons learned - associated with recent and ongoing atmospheric reanalyses and plans for the future. The meeting included overviews of each center s development efforts, a discussion of the issues in observations, models and data assimilation, and, finally, identification of priorities for future directions and potential areas of collaboration. This report summarizes the deliberations and recommendations from the meeting as well as some advances since the workshop.

Rienecker, Michele M.↗
NASA NTRS2011

Flexible Ablators: Applications and Arcjet Testing

Flexible ablators were conceived in 2009 to meet the technology pull for large, human Mars Exploration Class, 23 m diameter hypersonic inflatable aerodynamic decelerators. As described elsewhere, they have been recently undergoing initial technical readiness (TRL) advancement by NASA. The performance limits of flexible ablators in terms of maximum heat rates, pressure and shear remain to be defined. Further, it is hoped that this emerging technology will vastly expand the capability of future NASA missions involving atmospheric entry systems. This paper considers four topics of relevance to flexible ablators: (1) Their potential applications to near/far term human and robotic missions (2) Brief consideration of the balance between heat shield diameter, flexible ablator performance limits, entry vehicle controllability and aft-body shear layer impingement of interest to designers of very large entry vehicles, (3) The approach for developing bonding processes of flexible ablators for use on rigid entry bodies and (4) Design of large arcjet test articles that will enable the testing of flexible ablators in flight-like, combined environments (heat flux, pressure, shear and structural tensile loading). Based on a review of thermal protection system performance requirements for future entry vehicles, it is concluded that flexible ablators have broad applications to conventional, rigid entry body systems and are enabling to large deployable (both inflatable and mechanical) heat shields. Because of the game-changing nature of flexible ablators, it appears that NASA's Office of the Chief Technologist (OCT) will fund a focused, 3-year TRL advancement of the new materials capable of performance in heat fluxes in the range of 200-600 W/sq. cm. This support will enable the manufacture and use of the large-scale arcjet test designs that will be a key element of this OCT funded activity.

Thermal Protection↗
NASA NTRS2015

Development of the PRSEUS Multi-Bay Pressure Box for a Hybrid Wing Body Vehicle

NASA has created the Environmentally Responsible Aviation Project to explore and document the feasibility, benefits, and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift-to-drag ratios, reduced drag, and lower community noise. Although such novel configurations like the Hybrid Wing Body (HWB) offer better aerodynamic performance as compared to traditional tube-and-wing aircraft, their blended wing shapes also pose significant new design challenges. Developing an improved structural concept that is capable of meeting the structural weight fraction allocated for these non-circular pressurized cabins is the primary obstacle in implementing large lifting-body designs. To address this challenge, researchers at NASA and The Boeing Company are working together to advance new structural concepts like the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS), which is an integrally stiffened panel design that is stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. The large-scale multi-bay fuselage test article described in this paper is the final specimen in a building-block test program that was conceived to demonstrate the feasibility of meeting the structural weight goals established for the HWB pressure cabin.

Jegley, Dawn C.↗
NASA NTRS2015

Status of ERA Airframe Technology Demonstrators

NASA has created the Environmentally Responsible Aviation (ERA) Project to explore and document the feasibility, benefits and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift-to-drag ratios, reduced drag, and lower community noise. The Airframe Technology subproject contains two elements. Under the Damage Arresting Composite Demonstration an advanced material system is being explored which will lead to lighter airframes that are more structural efficient than the composites used in aircraft today. Under the Adaptive Compliant Trailing Edge Flight Experiment a new concept of a flexible wing trailing edge is being evaluated which will reduce weight and improve aerodynamic performance. This presentation will describe the development these two airframe technologies.

Davis, Pamela↗
NASA NTRS2019

Challenges and Potential Solutions to Develop and Fund NASA Flagship Missions

Large, strategic "Flagship" missions have unique characteristics that lead to challenging developmental difficulties for the National Aeronautics and Space Administration (NASA). Missions such as the Hubble Space Telescope (HST), James Webb Space Telescope (JWST), and the Mars Science Laboratory (MSL) had technical and programmatic challenges that led to significant schedule delays and subsequent cost growth. Although NASA has instituted policies that have reduced cost growth for more "typical" NASA science missions, NASA Flagship missions remain a distinct challenge due to their requirement to provide unprecedented science or tackle bold exploration goals, typically while concurrently developing new technologies. The unique challenges presented by Flagship missions make it extremely difficult to fully predict cost and schedule given that the technical and programmatic advances needed to meet performance requirements are unprecedented. This paper addresses why Flagship missions are unique and proposes a new programmatic approach to develop and fund Flagship missions.

Develop↗
NASA NTRS2019

Challenges and Potential Solutions to Develop and Fund NASA Flagship Missions

Large, strategic "Flagship" missions have unique characteristics that lead to challenging developmental difficulties for the National Aeronautics and Space Administration (NASA). Missions such as the Hubble Space Telescope (HST), James Webb Space Telescope (JWST), and the Mars Science Laboratory (MSL) had technical and programmatic challenges that led to significant schedule delays and subsequent cost growth. Although NASA has instituted policies that have reduced cost growth for more "typical" NASA science missions, NASA Flagship missions remain a distinct challenge due to their requirement to provide unprecedented science or tackle bold exploration goals, typically while concurrently developing new technologies. The unique challenges presented by Flagship missions make it extremely difficult to fully predict cost and schedule given that the technical and programmatic advances needed to meet performance requirements are unprecedented. This paper addresses why Flagship missions are unique and proposes a new programmatic approach to develop and fund Flagship missions.

flagship missions↗
NASA NTRS2019

Composites for Advanced Drive Systems

With the desire for increased power/weight for advanced drive system configurations, the investigation of materials, like composites is being explored to determine the feasibility of integration into advanced drive systems. This area of research directly aligns with the vision of the NASA (National Aeronautics and Space Administration) Revolutionary Vertical Lift Technology (RVLT) Project, which is to enable a generation of vertical lift vehicles that can achieve aggressive goals in the areas of high speed, high efficiency, high performance, low noise, and low emissions.Composite materials are lightweight, especially when comparing to the metallic materials commonly utilized in rotorcraft drive systems. By integrating composite materials into the drive system, the potential for improvements to power/weight exists as well as other potential benefits such as reductions in vibration and/or noise. Each of these areas of potential benefit will largely influence the overall performance and reliability of future vertical lift vehicles. Prior NASA research has been performed that developed a prototype hybrid double helical bull gear which was successfully demonstrated (LaBerge, Kelsen E.; Handschuh, Robert F.; Roberts, Gary; Thorp, Scott;, 2016) and current NASA research is being performed to optimize the hybrid gear design.While the potential benefits of composite materials in vertical lift drive systems mentioned above are highly desirable, many challenges exist that need to be addressed. To address the benefits and challenges with the integration of composite materials in advanced vertical lift drive systems, the identification of advanced drive system configurations and technical challenges is required. For this project, Bell Helicopter Textron identified an advanced drive system configuration and provided conceptual designs for this advanced drive system configuration, identified technical challenges, and provided recommendations as to how those challenges can be overcome.

transmission↗
NASA NTRS2019

Alignment and Bonding of Silicon Mirrors for High-Resolution X-Ray Optics

How to align and bond sub-arc second silicon mirrors? (1) Description of the alignment and bonding process. (2) Technical challenges and advances in aligning and bonding precise silicon mirrors. (a) Precise mirror placement (b) Measurement of focusing (c) Method of spacer adjustment (d) Bonding distortion and displacement (e) Co-alignment and bonding of subsequent mirrors.

Chan, Kai-Wing↗
NASA NTRS1986

A definition study of an Advanced Data Collection and Location System (ADCLS)

The technical and economic advantages of developing an Advanced Data Collection and Location System (ADCLS) to operate within the Earth Observation System (EOS) planned for Polar Platform, as a replacement and/or augmentation of the existing ARGOS data collection system were assessed. The cost/effectiveness of ADCLS with respect to ARGOS hinges on the traffic and quality of service demand of the future user constituency.

Source record↗
NASA NTRS1987

Improved silicon carbide for advanced heat engines

This is the second annual technical report entitled, Improved Silicon Carbide for Advanced Heat Engines, and includes work performed during the period February 16, 1986 to February 15, 1987. The program is conducted for NASA under contract NAS3-24384. The objective is the development of high strength, high reliability silicon carbide parts with complex shapes suitable for use in advanced heat engines. The fabrication methods used are to be adaptable for mass production of such parts on an economically sound basis. Injection molding is the forming method selected. This objective is to be accomplished in a two-phase program: (1) to achieve a 20 percent improvement in strength and a 100 percent increase in Weibull modulus of the baseline material; and (2) to produce a complex shaped part, a gas turbine rotor, for example, with the improved mechanical properties attained in the first phase. Eight tasks are included in the first phase covering the characterization of the properties of a baseline material, the improvement of those properties and the fabrication of complex shaped parts. Activities during the first contract year concentrated on two of these areas: fabrication and characterization of the baseline material (Task 1) and improvement of material and processes (Task 7). Activities during the second contract year included an MOR bar matrix study to improve mechanical properties (Task 2), materials and process improvements (Task 7), and a Ford-funded task to mold a turbocharger rotor with an improved material (Task 8).

Whalen, Thomas J.↗
NASA NTRS1959

Noise Survey Under Static Conditions of a Turbine-Driven Transonic Propeller with an Advance Ratio of 4.0

Overall sound-pressure levels and frequency spectra have been obtained under static conditions on a transonic propeller with an advance ratio of 4.0. This advance ratio represents a practical minimum tip speed for transonic flight speeds. The three-blade, 6.85-foot-diameter, 1,710-rpm propeller is powered by a turbine engine and is designed to operate at a forward Mach number of 0.82 at an altitude of 35,000 feet. The results consist of overall sound-pressure levels and frequency spectra obtained from analyses made of recordings taken during ground runups of the propeller with an advance ratio of 4.0. These results are compared with similar results obtained from a supersonic propeller having an advance ratio of 2.2 reported in NACA Technical Note 4059 and from a modified supersonic propeller having an advance ratio of 3.2 reported in NACA Technical Note 4172. The advance-ratio-4.0 propeller of the present investigation produced a maximum sound-pressure level of 117.5 decibels when corrected to 1,400 horsepower. This overall noise output represents a lowering of the maximum overall sound-pressure level by approximately 5 decibels from that of the advance-ratio-3.2 propeller and by 14 decibels from that of the advance-ratio-2.2 propeller at comparable engine horsepowers. The frequency spectrum for the present propeller was the same as that for the advance-ratio-3.2 propeller, that is, high sound-pressure levels for the low-blade-passage harmonics with a rapid decrease in level with increasing order of harmonic. The 5-decibels reduction, under static conditions, is not considered sufficient to warrant the increased weight and operational penalties that would accompany this selection over the more efficient advance-ratio-3.2 propeller. At high forward speeds, however, the noise level of the present advance-ratio-4.0 propeller, especially in the fre- quency range where passenger comfort is important, should probably be substantially lower than that of the advance-ratio-3.2 propeller.

Kurbjun, Max C.↗
NASA NTRS1972

Advanced study of global oceanographic requirements for EOS A/B: Technical volume

Characteristics of the ocean are considered in terms of U.S. social, scientific and ecomomic priorities and in terms of the measurements that can best be made from a spacecraft. The kinds of information needed to advance the basic ocean sciences, to improve marine transportation and fisheries operations, and to provide information for pollution control are discussed. These information needs were related to sensor concepts and an optimum sensor complement is presented, together with orbital considerations. The data-gathering capabilities of an oceanographic spacecraft were considered in relation to those of terrestrial oceanographic programs, using airborne, surface, and submarine platforms. Data management problems are discussed and are considered to be solvable with current technology.

Source record↗