SEARCH · Search NASA
Results for “temperature programmed desorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption
Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology’s success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@ pCO2 = 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@ pCO2 = 1 bar). Moreover, it seems there is an optimum initial concentration of the ions’ solutions for the tested HTs, which depends on the final application—c-HT1 showed a better capacity at 35 °C and c-HT2 at 300 °C. From the adsorption-desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.
Effects of Alkali and Alkaline Earth Cocations on the Activity and Hydrothermal Stability of Cu/SSZ-13 NH3-SCR Catalysts
Using a three-step aqueous solution ion-exchange method, cocation modified Cu/SSZ-13 SCR catalysts were synthesized. These catalysts, in both fresh and hydrothermally aged forms, were characterized with several methods including temperature-programmed reduction by H2 (H2-TPR), temperature-programmed desorption of NH3 (NH3-TPD), and 27Al solid-state nuclear magnetic resonance (NMR) and diffuse reflectance Infrared Fourier Transform (DRIFT) spectroscopies. Their catalytic performance was probed using steady-state standard NH3-SCR. Characterization results indicate that cocations weaken interactions between Cu-ions and the CHA framework making them more readily reducible. By removing a portion of Brønsted acid sites, cocations also help to mitigate hydrolysis of the zeolite catalysts during hydrothermal aging as evidenced from 27Al NMR. Reaction tests show that certain cocations, especially Li+ and Na+, promote low-temperature SCR rates while others show much less pronounced effects. In terms of applications, our results indicate that introducing cocations can be a viable strategy to improve both low- and high-temperature performance of Cu/SSZ-13 SCR catalysts.
Impact of a Mixed Oxide’s Surface Composition and Structure on Its Adsorptive Properties: Case of the (Fe,Cr) 3 O 4 (111) Termination of the α-(Fe,Cr) 2 O 3 (0001) Surface
Characterization of an α-(Fe 0.75 ,Cr 0.25 ) 2 O 3 (0001) mixed oxide single crystal surface was conducted using x-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), low energy electron diffraction (LEED) and temperature programmed desorption (TPD). After sputter/anneal cleaning in ultra-high vacuum (UHV), the mixed oxide surface became terminated with a magnetite-(111) structure based on the presence of (2x2) spots in LEED and Fe 2+ in XPS. The composition of the surface was close to that of M 3 O 4 based on XPS, with the metal (M) content of Fe 2+/3+ and Cr 3+ being close to 1.4:1, despite the fact that the film’s bulk was 3:1 with respect to the metal cations. The enrichment of the surface with Cr was not altered by high temperature oxidation in UHV, but could be returned to that of the bulk film composition by exposure to the ambient. Adsorption of various probe molecules (NO, O 2 , CO 2 and H 2 O) was used to identify the active cation sites present in the (Fe,Cr) 3 O 4 (111) terminated surface. Although XPS and SIMS both indicated that the near-surface region was enriched in Cr 3+ , no adsorption states typically associated with Cr 3+ sites on α-Cr 2 O 3 single crystal surfaces were detected. Instead, the TPD behaviors of O 2 and CO 2 pointed toward the main active sites being Fe 2+ and Fe 3+ , with O 2 preferentially adsorbing at the former and CO 2 at the latter. NO was observed to bind at both Fe 2+ and Fe 3+ sites, and H 2 O TPD looked nearly identical to that for H 2 O on the Fe 3 O 4 (111) surface. Competition for adsorption sites between coadsorbed combinations of CO 2 , O 2 , H 2 O and NO corroborated these assignments. These results indicate that the surface composition of a mixed oxide can vary significantly from its bulk composition depending on the treatment conditions. Even then, the surface composition does not necessarily provide direct insight into the active adsorption sites. In the case of the (Fe,Cr) 3 O 4 (111) termination of the α-(Fe 0.75 ,Cr 0.25 ) 2 O 3 (0001) surface, Cr 3+ cations in the near-surface region appear to be fully coordinated and unavailable for adsorbing molecules. The authors thank Drs. Sara Chamberlin and Scott Chambers for supplying the film used in this work. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.
Rational Design of Metalorganic Complexes for the Deposition of Solid Films: Growth of Metallic Copper with Amidinate Precursors
A fourth-generation copper metalorganic compound, Cu(I)-2-(tert-butylimino)-5,5,-dimethylpyrrolidinate, was designed, and its chemistry on nickel surfaces characterized, for use as a precursor for the atomic layer deposition (ALD) of thin solid metal films. On the basis of surface-science studies with similar acetamidinate, guanidinate, and iminopyrrolidinate complexes, it was concluded that the high (and undesirable) reactivity of those when adsorbed on metal surfaces is due to the lability of their C–N bonds, which can be triggered by β-hydrogen elimination steps. Accordingly, a ligand was designed without any available hydrogen atoms at those positions. The result is a much more stable reactant. Temperature programed desorption (TPD) experiments indicated that dehydrogenation from the new compound on Ni(110) starts only at 450 K, an increase of about 200 K in comparison with any of the earlier-generations ALD precursors. TPD and X-ray photoelectron spectroscopy (XPS) data were used to establish the details of the decomposition mechanism of the ligands, which appears to be initiated by the scission of the imino-pyrrolidine C–N bond. Many byproducts are produced, including HCN, N 2 , iso-butene, and possibly pyrroline and other olefins such as pentenes. However, all of that occurs at relatively high temperatures, leaving an acceptable temperature window for the use of this complex for the deposition of copper films. An increased stability of the new ligands in our new copper ALD precursor was also observed on SiO 2 thin films, attesting to the generality of our conclusions. We suggest that our methodology for the rational design of this ALD precursor, based on studies of its surface chemistry, can be easily extended to other cases.
Effect of reaction temperature on CO{sub 2} capture using potassium-based solid sorbent in bubbling fluidized-bed reactor
We investigated the effects of carbonation and regeneration temperature on the CO{sub 2} capture characteristics using SorbKX35, a potassium-based solid sorbent in a bubbling fluidized-bed reactor. A dry sorbent, SorbKX35 consists of K{sub 2}CO{sub 3} for absorption and supporters for mechanical strength. We also measured the physical properties of the sorbent, such as pore size, pore volume, and surface area after carbonation or regeneration, to confirm the extent of the reaction. With H{sub 2}O vapor pretreatment, nearly complete CO{sub 2} removal was initially achieved and maintained for about 10 min within a temperature range of 333.15-363.15 K with 2 s gas residence time. At lower temperature, CO{sub 2} capture was more effective during 1 h of carbonation. From the results of temperature programmed desorption and gas adsorption method (BET), we found that the regeneration of carbonated SorbKX35 was not complete at 473.15 K. The results obtained in this study can be used as basic data for designing and operating a large-scale CO{sub 2} capture process with two fluidized-bed reactors.
The Surface Chemistry of Methanol on TiO 2 (110): Effects of Pressure and Temperature on the Stability of C–O and C–H Bonds
Synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the surface chemistry of methanol on TiO 2 (110), examining the effects of methanol pressure, oxide temperature, and coadsorption with H 2 . At 300 K, the adsorption of methanol on TiO 2 (110) leads to the formation of CH 3 O on the surface with a minor amount of CH 3 OH present. The easy cleavage of the O–H bond in the alcohol agrees with the predictions of theoretical calculations, and most of the adsorbed CH 3 O was not associated with the presence of Ti 3+ sites in the oxide substrate. The adsorbed CH 3 O was removed from the TiO 2 (110) surface by heating to 600 K without the deposition of CH x fragments or C on the oxide. The results of temperature-programmed desorption (TPD) showed the evolution of methanol and formaldehyde at 360 and 490 K as a result of a disproportionation reaction: 2CH 3 O → CH 3 OH + CH 2 O. This surface chemistry, where there is no rupture of the C–O bond, and only selective cleavage of O–H and C–H bonds, is very different from that found on metals used in catalysts for methanol reforming, where massive conversion of the alcohol into CO, CH x and C species is seen. Furthermore, the TPD data indicate that any CH 3 O formed on the oxide surface can be hydrogenated and desorbed as CH 3 OH at temperatures below 550 K. In this respect, titania is an ideal support for catalysts employed to achieve methanol synthesis through CO 2 hydrogenation.
ON THE FORMATION AND ISOMER SPECIFIC DETECTION OF PROPENAL (C{sub 2}H{sub 3}CHO) AND CYCLOPROPANONE (c-C{sub 3}H{sub 4}O) IN INTERSTELLAR MODEL ICES—A COMBINED FTIR AND REFLECTRON TIME-OF-FLIGHT MASS SPECTROSCOPIC STUDY
The formation routes of two structural isomers—propenal (C{sub 2}H{sub 3}CHO) and cyclopropanone (c-C{sub 3}H{sub 4}O)—were investigated experimentally by exposing ices of astrophysical interest to energetic electrons at 5.5 K thus mimicking the interaction of ionizing radiation with interstellar ices in cold molecular clouds. The radiation-induced processing of these ices was monitored online and in situ via Fourier Transform Infrared spectroscopy and via temperature programmed desorption exploiting highly sensitive reflectron time-of-flight mass spectrometry coupled with single photon ionization in the post irradiation phase. To selectively probe which isomer(s) is/are formed, the photoionization experiments were conducted with 10.49 and 9.60 eV photons. Our studies provided compelling evidence on the formation of both isomers—propenal (C{sub 2}H{sub 3}CHO) and cyclopropanone (c-C{sub 3}H{sub 4}O)—in ethylene (C{sub 2}H{sub 4})—carbon monoxide (CO) ices forming propenal and cyclopropanone at a ratio of (4.5 ± 0.9):1. Based on the extracted reaction pathways, the cyclopropanone molecule can be classified as a tracer of a low temperature non-equilibrium chemistry within interstellar ices involving most likely excited triplet states, whereas propenal can be formed at ultralow temperatures, but also during the annealing phase via non-equilibrium as well as thermal chemistry (radical recombination). Since propenal has been detected in the interstellar medium and our laboratory experiments demonstrate that both isomers originated from identical precursor molecules our study predicts that the hitherto elusive second isomer—cyclopropanone—should also be observable toward those astronomical sources such as Sgr B2(N) in which propenal has been detected.
High-Temperature Decomposition of Brønsted Acid Sites in Gallium-Substituted Zeolites
The dehydroxylation of Broensted acid sites (BAS) in Ga-substituted zeolites was investigated at temperatures up to 850 C using X-ray absorption spectroscopy (XAS), Fourier transform infrared spectroscopy (FTIR), and mass spectrometry-temperature programmed desorption (MS-TPD). X-ray absorption near-edge spectroscopy (XANES) revealed that the majority of gallium has tetrahedral coordination even after complete dehydroxylation. The interatomic gallium-oxygen distance and gallium coordination number determined by extended X-ray absorption fine structure (EXAFS) are consistent with gallium in tetrahedral coordination at low T (< 550 C). Upon heating Ga-Beta and Ga-ZSM5 to 850 C, analysis of the EXAFS showed that 70 and 80% of the gallium was still in tetrahedral coordination. The remainder of the gallium was found to be in octahedral coordination. No trigonal Ga atoms were observed. FTIR measurements carried out at similar temperatures show that the intensity of the OH vibration due to BAS has been eliminated. MS-TPD revealed that hydrogen in addition to water evolved from the samples during dehydroxylation. This shows that dehydrogenation in addition to dehydration is a mechanism that contributes to BAS decomposition. Dehydrogenation was further confirmed by exposing the sample to hydrogen to regenerate some of the BAS as monitored by FTIR and MS-TPD.
Dimethyl methylphosphonate decomposition on fully oxidized and partially reduced ceria thin films
Explore the source record for details and available documents.
Conversion of 1,2-Propylene Glycol on Rutile TiO2(110)
We have studied the reactions of 1,2-propylene glycol (1,2-PG), DOCH(CH3)CH2OD, on partially reduced, hydroxylated and oxidized TiO2(110) surfaces using temperature programmed desorption. On reduced TiO2(110), propylene, propanal, and acetone are identified as primary carbon-containing products. While the propylene formation channel dominates at low 1,2-PG coverages, all of the above-mentioned products are observed at high coverages. The carbon-containing products are accompanied by the formation of D2O and D2. The observation of only deuterated products shows that the source of hydrogen (D) is from the 1,2-PG hydroxyls. The role of bridging oxygen vacancy (VO) sites was further investigated by titrating them via hydroxylation and oxidation. The results show that hydroxylation does not change the reactivity because the VO sites are regenerated at 500 K, which is a temperature lower than the 1,2-PG product formation temperature. In contrast, surface oxidation causes significant changes in the product distribution, with increased acetone and propanal formation and decreased propylene formation. Additionally D2 is completely eliminated as an observed product at the expense of D2O formation.
Modeling the Reaction of Fe Atoms with CCl4
The reaction of zero-valent iron with carbon tetrachloride (CCl4) in gas phase was studied using density functional theory. Temperature programmed desorption experiments over a range of Fe and CCl4 coverages on a FeO(111) surface, demonstrate a rich surface chemistry with several reaction products (C2Cl4, C2Cl6, OCCl2, CO, FeCl2, FeCl3) observed. The reactivity of Fe and CCl4 was studied under three stoichiometries, one Fe with one CCl4, one Fe with two CCl4 molecules and two Fe with one CCl4, modeling the environment of the experimental work. The electronic structure calculations give insight into the reactions leading to the experimentally observed products and suggest that novel Fe-C-Cl containing species are important intermediates in these reactions. The intermediate complexes are formed in highly exothermic reactions, in agreement with the experimentally observed reactivity with the surface at low temperature (30 K). This initial survey of the reactivity of Fe with CCl4 identifies some potential reaction pathways that are important in the effort to use Fe nano-particles to differentiate harmful pathways that lead to the formation of contaminants like chloroform (CHCl3) from harmless pathways that lead to products such as formate (HCO2-) or carbon oxides in water and soil. The Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.
Ba 1−x Sr x FeO 3−δ as an improved oxygen storage material for chemical looping air separation: a computational and experimental study
Chemical looping air separation (CLAS) is a promising technology to generate oxygen-rich gas streams to enable efficient carbon dioxide capture during fossil fuel combustion or gasification. CLAS relies on the capture and release of oxygen from the atmosphere using the redox properties of an oxygen-selective solid oxide carrier. This study investigates the redox characteristics of Ba 1−x Sr x FeO 3−δ (0.0 ≤ x ≤ 0.417, 0.0 ≤ δ ≤ 0.5) using a combination of density functional theory (DFT) calculations and experimental verification using X-ray diffraction, thermogravimetric analysis, and oxygen-temperature-programmed desorption. The DFT computed energies of the Ba 1−x Sr x FeO 3−δ perovskites reveal a composition-dependent transition from hexagonal to cubic phases as the Sr-concentration or oxygen vacancy concentration increases. Oxygen vacancy formation energies of the cubic perovskites are found to be lower than those of their hexagonal counterparts. A low oxygen diffusion barrier of ∼1 eV combined with the thermodynamic preference of Ba 1−x Sr x FeO 3−δ compositions that form in a cubic phase suggests them as promising candidates for oxygen storage applications. The experimental results corroborate this finding by identifying Ba 0.75 Sr 0.25 FeO 3−δ in the cubic phase as an optimal composition offering low-temperature oxygen storage capacities comparable to that of the state-of-the-art Sr 0.75 Ca 0.25 FeO 3−δ perovskite oxygen storage material at 325 °C and 350 °C.
Molecular water adsorption and reactions on (alpha)-Al2O3(0001) and (alpha)-Alumina Particles
The adsorption and reaction of water on single crystal, -Al2O3(0001) in ultrahigh vacuum, and -alumina particles in ambient conditions, was investigated using temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), diffuse reflectance infrared Fourier transform spectra (DRIFTS) and other surface science techniques. For a water coverage of 1 H2O/(surface Al3+) on -Al¬2O3(0001), no evidence for the surface hydroxyls expected from dissociative adsorption was observed in the infrared spectra, while the 2 vibration of molecular water was observed. Electron-stimulated desorption of molecular water at low coverages also indicated molecular or mixed (molecular plus dissociative) adsorption. Analysis of Kr TPD spectra showed that the water films wet the alumina substrate and suggested that the films were initially growing layer-by-layer. In contrast with the single crystal results, DRIFTS of water adsorption on alumina particles indicated the presence of surface hydroxyls that persist even after annealing to high temperatures in oxygen. For water on -Al2O3(0001) at coverages less than 0.3 H2O/(surface Al3+), water desorbed over a broad temperature range extending from ~250 K to 700 K. For larger coverages, water desorption occurred at temperatures between ~160 K and 250 K, consistent with desorption of molecular water. The results, which are consistent with at most a small amount of water dissociation on the Al-terminated (0001) surface, are difficult to reconcile with calculations suggesting that the barrier to dissociation is small. However, the results are consistent with recent vibrational sum frequency experiments showing that the hydroxylation of the Al-terminated (0001) surface takes many days even at ambient pressures and temperatures.
Oxidation of H 2 S by coadsorbed oxygen on the α-Cr 2 O 3 (0001) surface
The interactions of H 2 S and oxygen have been explored on the α-Cr 2 O 3 (0001) surface using temperature programmed desorption (TPD), Auger electron spectroscopy (AES) and sticking coefficient measurements. H 2 S adsorbs with near unity sticking on the clean α-Cr 2 O 3 (0001) surface at 125 K up to a coverage of ~1.6 ML (where 1 ML is defined as the surface areal density of Cr 3+ sites). Reversible adsorption is evidenced in TPD by three desorption states evolving between 150 and 315 K. Although no S-containing decomposition products were observed in TPD, AES detected S on the surface after TPD indicating that some degree of irreversible decomposition occurred. The level of H 2 S decomposition on the clean surface was estimated to be between 0.2-0.5 ML using water TPD as an indicator of S site blocking. In contrast, preadsorbed O 2 at three temperatures (125, 400 and 800 K) exerted drastic changes on the surface chemistry of H 2 S seen on the clean surface. At 400 and 800 K, O 2 adsorption on clean α-Cr 2 O 3 (0001) is dissociative, populating the surface with chromyl groups (Cr=O) in the former case (corresponding to roughly 1 O per Cr 3+ surface site) and resulting in a nearly complete O-termination sheet (~3 O per Cr 3+ ) in the latter case. Little or no H2S chemistry is observed on the O-terminated surface based on TPD and AES. However, availability of Cr-coordination sites on the chromyl-terminated surface facilitated H 2 S adsorption and oxidation during TPD to SO 2 (445-470 K) and H 2 O (320 K). Isotopic-labeling studies suggest that the oxygen atom in the water product originates from dosed oxygen whereas that in the SO 2 product comes from the lattice. Similar results were obtained from H 2 S dosed on the surface pretreated with O 2 at 125 K, where O 2 adsorption is predominately molecular, except that S 2 was also detected in TPD at 525 K and the amount of SO 2 produced at 445 K decreased. These results suggest that atomically adsorbed oxygen effectively oxidizes H 2 S, but that molecularly adsorbed O 2 is key to the partial oxidation of H 2 S to elemental sulfur.
ON THE FORMATION OF BENZOIC ACID AND HIGHER-ORDER BENZENE CARBOXYLIC ACIDS IN INTERSTELLAR MODEL ICE GRAINS
With a binary ice mixture of benzene (C{sub 6}H{sub 6}) and carbon dioxide (CO{sub 2}) at 10 K under contamination-free ultrahigh vacuum conditions, the formation of benzene carboxylic acids in interstellar ice grains was studied. Fourier transform infrared spectroscopy was used to probe for the formation of new species during the chemical processing of the ice mixture and during the following temperature-programmed desorption. Newly formed benzene carboxylic acid species, i.e., benzoic acid, as well as meta - and para -benzene dicarboxylic acid, were assigned using newly emerging bands in the infrared spectrum; a reaction mechanism, along with rate constants, was proposed utilizing the kinetic fitting of the coupled differential equations.
Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)
The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.
Adsorption and reaction of methanol on Fe 3 O 4 (001)
The interaction of methanol with iron oxide surfaces is of interest due to its potential in hydrogen storage, and from a fundamental perspective as a chemical probe of the reactivity. We present here a study examining the adsorption and reaction of methanol on magnetite Fe 3 O 4 (001) at cryogenic temperatures using a combination of temperature programmed desorption, x-ray photoelectron spectroscopy, and scanning tunneling microscopy. We report the methanol desorption profile from Fe 3 O 4 (001) is complex, exhibiting peaks at 145, 175, 238, and 273 K, corresponding to the desorption of intact methanol, as well as peaks at 350 and 500 K due to the reaction of methoxy intermediates. The saturation of a monolayer of methanol corresponds to ~5 molecules/unit cell (u.c.), which is slightly higher than the number of surface octahedral iron atoms of 4/u.c. We probe the kinetics and thermodynamics of the desorption of molecular methanol using inversion analysis. The deconvolution of the complex desorption profile into individual peaks allows for calculations of both the desorption energy and the prefactor of each feature. The initial 0.7 methanol/u.c. reacts to form a methoxy and hydroxy intermediates by 180 K, which remains on the surface above room temperature after intact methanol has desorbed. The methoxy species react via one of two channels, a recombination reaction with surface hydroxyls to form additional methanol at ~350 K, and a disproportionation reaction to form methanol and formaldehyde at ~500 K. Only 20% of the methoxy species undergo the disproportionation reaction, with most of them reacting via the 350 K pathway.