Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermodynamic phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Chapter 2.6: Physical Chemistry and Thermal Evolution of Ices at Ganymede

Ganymede’s surface is composed mostly of water ice and other icy materials in addition to minor non-ice components. The formation and evolution of Ganymede’s landforms highly depend on the nature of the icy materials as they present various thermal and rheological behaviors. This chapter reviews the currently known thermodynamic parameters of the ice phases and hydrates reported on Ganymede, which seem to affect the evolution of the surface, using mainly results from the Voyager and Galileo missions

C Ahrens↗
NASA NTRS1994

Occurence and implications of silicon nitride in enstatic chondrites

Silicon nitride Si3N4, has previously been observed to be a common constituent of acid residues of Qingzhen (EH3) and Indarch (EH4). Ion probe analysis of the Si, N and C isotopic compositions of individual Si3N4 grains from Qingzhen and Indarch acid residues suggest most, if not all, grains are Solar System in origin. A few grains have isotopically anomalous C but this is probably due to small presolar SiC grains adhering to them. In situ observations of the Si3N4 in Qingzhen show that it is only present within, and probably exsolved from, host phases which contain elemental Si in solid solution. Thermodynamic calculations suggest that the Si3N4 probably formed during metamorphism and not in the nebula. Thermodynamic calculations also show that sinoite (Si2N2O) and not Si3N4 should be the stable phase during metamorphism. It appears that kinetic factors must have inhibited the formation if sinoite in Qimgzhen and Indarch.

Alexander, C. M. O'D.↗
NASA NTRS2016

Ab Initio Simulations of Phase Stability and Martensitic Transitions in NiTi

For NiTi based alloys, the shape memory effect is governed by a transition from a low-temperature martensite phase to a high-temperature austenite phase. Despite considerable experimental and computational work, basic questions regarding the stability of the phases and the martensitic phase transition remain unclear even for the simple case of binary, equiatomic NiTi. We perform ab initio molecular dynamics simulations to describe the temperature-dependent behavior of NiTi and resolve several of these outstanding issues. Structural correlation functions and finite temperature phonon spectra are evaluated to determine phase stability. We show that finite temperature, entropic effects stabilize the experimentally observed martensite (B19') and austenite (B2) phases while destabilizing the theoretically predicted (B33) phase. Free energy computations based on ab initio thermodynamic integration confirm these results and permit estimates of the transition temperature between the phases. In addition to the martensitic phase transition, we predict a new transition between the B33 and B19' phases. The role of defects in suppressing phase transformation temperatures is discussed.

Simulations↗
NASA NTRS1996

Computation of Kinetics for the Hydrogen/Oxygen System Using the Thermodynamic Method

A new method for predicting chemical rate constants using thermodynamics has been applied to the hydrogen/oxygen system. This method is based on using the gradient of the Gibbs free energy and a single proportionality constant D to determine the kinetic rate constants. Using this method the rate constants for any gas phase reaction can be computed from thermodynamic properties. A modified reaction set for the H/O system is determined. A11 of the third body efficiencies M are taken to be unity. Good agreement was obtained between the thermodynamic method and the experimental shock tube data. In addition, the hydrogen bromide experimental data presented in previous work is recomputed with M's of unity.

Marek, C. John↗
NASA NTRS1985

Two-phase flows within systems with ambient pressure

In systems where the design inlet and outlet pressures are maintained above the thermodynamic critical pressure, it is often assumed that two phase flows within the system cannot occur. Designers rely on this simple rule of thumb to circumvent problems associated with a highly compressible two phase flow occurring within the supercritical pressure system along with the uncertainties in rotordynamics, load capacity, heat transfer, fluid mechanics, and thermophysical property variations. The simple rule of thumb is adequate in many low power designs but is inadequate for high performance turbomachines and linear systems, where two phase regions can exist even though outlet pressure is greater than critical pressure. Rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two phase zone can differ significantly from those for a single-phase zone. Using the Reynolds equation the angular velocity, eccentricity, geometry, and ambient conditions are varied to determine the point of two phase flow incipience.

Hendricks, R. C.↗
NASA NTRS1993

Containerless processing of undercooled melts

The investigation focused on the control of microstructural evolution in Mn-Al, Fe-Ni, Ni-V, and Au-Pb-Sb alloys through the high undercooling levels provided by containerless processing, and provided fundamental new information on the control of nucleation. Solidification analysis was conducted by means of thermal analysis, x-ray diffraction, and metallographic characterization on samples processed in a laboratory scale drop tube system. The Mn-Al alloy system offers a useful model system with the capability of phase separation on an individual particle basis, thus permitting a more complete understanding of the operative kinetics and the key containerless processing variables. This system provided the opportunity of analyzing the nucleation rate as a function of processing conditions and allowed for the quantitative assessment of the relevant processing parameters. These factors are essential in the development of a containerless processing model which has a predictive capability. Similarly, Ni-V is a model system that was used to study duplex partitionless solidification, which is a structure possible only in high under cooling solidification processes. Nucleation kinetics for the competing bcc and fcc phases were studied to determine how this structure can develop and the conditions under which it may occur. The Fe-Ni alloy system was studied to identify microstructural transitions with controlled variations in sample size and composition during containerless solidification. This work was forwarded to develop a microstructure map which delineates regimes of structural evolution and provides a unified analysis of experimental observations. The Au-Pb-Sb system was investigated to characterize the thermodynamic properties of the undercooled liquid phase and to characterize the glass transition under a variety of processing conditions. By analyzing key containerless processing parameters in a ground based drop tube study, a carefully designed flight experiment may be planned to utilize the extended duration microgravity conditions of orbiting spacecraft.

Perepezko, J. H.↗
NASA NTRS1984

A thermodynamic model for subsolidus equilibria in the system CaO-MgO-Al2O3-SiO2

It is shown that the high temperature enthalpy of solution data for pure phases and solid solutions in the CMAS system are, for 'gabbroic' and 'peridotitic' compositions, consistent with available phase equilibrium data for the MAS, CAS and CMAS systems. A refined set of values of thermodynamic properties for these phases and solid solutions is tabulated. The small differences between the new data set and that of Helgeson et al. (1978) arise from new data on heat capacity and enthalpy being incorporated. The important constraints applied and the major difficulties in fitting which arose are summarized.

Wood, B. J.↗
NASA NTRS1988

Methods for heat transfer and temperature field analysis of the insulated diesel, phase 3

Work during Phase 3 of a program aimed at developing a comprehensive heat transfer and thermal analysis methodology for design analysis of insulated diesel engines is described. The overall program addresses all the key heat transfer issues: (1) spatially and time-resolved convective and radiative in-cylinder heat transfer, (2) steady-state conduction in the overall structure, and (3) cyclical and load/speed temperature transients in the engine structure. These are all accounted for in a coupled way together with cycle thermodynamics. This methodology was developed during Phases 1 and 2. During Phase 3, an experimental program was carried out to obtain data on heat transfer under cooled and insulated engine conditions and also to generate a database to validate the developed methodology. A single cylinder Cummins diesel engine was instrumented for instantaneous total heat flux and heat radiation measurements. Data were acquired over a wide range of operating conditions in two engine configurations. One was a cooled baseline. The other included ceramic coated components (0.050 inches plasma sprayed zirconia)-piston, head and valves. The experiments showed that the insulated engine has a smaller heat flux than the cooled one. The model predictions were found to be in very good agreement with the data.

Morel, Thomas↗
NASA NTRS1976

Statistical mechanics of light elements at high pressure. IV - A model free energy for the metallic phase

A large quantity of data on the thermodynamic properties of hydrogen-helium metallic liquids have been obtained in extended computer calculations in which a Monte Carlo code essentially identical to that described by Hubbard (1972) was used. A model free energy for metallic hydrogen with a relatively small mass fraction of helium is discussed, taking into account the definition of variables, a procedure for choosing the free energy, values for the fitting parameters, and the evaluation of the entropy constants. Possibilities concerning a use of the obtained data in studies of the interiors of the outer planets are briefly considered.

Dewitt, H. E.↗
NASA NTRS1991

Metastable phase formation in undercooled liquid lead alloys

During non-equilibrium processes metastable phases are formed instead of stable phases due to the operation of various kinetic or structural constraints. By removing the most effective nucleation sites for the stable phase using emulsified droplet samples, stable phase formation can be prohibited in a broad range of undercooling and the phase space available in the metastable regime can be mapped out. With this method the thermodynamic properties of the undercooled liquid and the metastable phase boundaries corresponding to reversible metastable (solid + liquid) phase equilibria are examined from experimental data. The analysis reveals important implications for the nucleation kinetics and the choice of the kinetically most favored solidification path.

Fecht, Hans J.↗
NASA NTRS1984

Natural environment design criteria for the space station program definition phase

The natural environment design criteria requirements for use in the Space Station and its Elements (SSPE) definition phase studies are presented. The atmospheric dynamic and thermodynamic environments, meteoroids, radiation, physical constants are addressed. It is intended to enable all groups involved in the definition phase studies to proceed with a common and consistent set of natural environment criteria requirements.

Vaughan, W. W.↗
NASA NTRSDate not supplied

Composition-property correlations in NiTi-based shape memory alloys from the first principles

Development of shape memory alloys (SMA) has been traditionally accomplished by means of extensive empirical efforts, with a very limited support from phenomenological models and related tools. We present a theoretical framework based on the Hamiltonian formalism, which connects important thermodynamic properties directly to the relative energies (the eigenvalues of the Hamiltonian), computed from the first principles using density functional theory. The estimates based on this formalism allow to establish correlations between composition and physical properties, such as relative energies, phase transition temperatures, hysteresis, thermal expansion, and other thermodynamic information. Importantly, estimates and correlations not only provide a fast answer, but also elucidate underpinning of thermodynamic features in terms of the electronic structure. Using this framework, we consider phase transformations and correlations between the selected properties and composition in the NiTi-based ternary and multicomponent shape memory alloys. Our theoretical guidance facilitates design and development of future alloys.

shape memory alloys↗
NASA NTRS1993

Experimental partitioning of Zr, Ti, and Nb between silicate liquid and a complex noble metal alloy and the partitioning of Ti between perovskite and platinum metal

El Goresy et al.'s observation of Nb, Zr, and Ta in refractory platinum metal nuggets (RPMN's) from Ca-Al-rich inclusions (CAI's) in the Allende meteorite led them to propose that these lithophile elements alloyed in the metallic state with noble metals in the early solar nebula. However, Grossman pointed out that the thermodynamic stability of Zr in the oxide phase is vastly greater than metallic Zr at estimated solar nebula conditions. Jones and Burnett suggested this discrepancy may be explained by the very non-ideal behavior of some lithophile transition elements in noble metal solutions and/or intermetallic compounds. Subsequently, Fegley and Kornacki used thermodynamic data taken from the literature to predict the stability of several of these intermetallic compounds at estimated solar nebula conditions. Palme and Schmitt and Treiman et al. conducted experiments to quantify the partitioning behavior of certain lithophile elements between silicate liquid and Pt-metal. Although their results were somewhat variable, they did suggest that Zr partition coefficients were too small to explain the observed 'percent' levels in some RPMN's. Palme and Schmitt also observed large partition coefficients for Nb and Ta. No intermetallic phases were identified. Following the work of Treiman et al., Jurewicz and Jones performed experiments to examine Zr, Nb, and Ti partitioning near solar nebula conditions. Their results showed that Zr, Nb, and Ti all have an affinity for the platinum metal, with Nb and Ti having a very strong preference for the metal. The intermetallic phases (Zr,Fe)Pt3, (Nb,Fe)Pt3, and (Ti,Fe)Pt3 were identified. Curiously, although both experiments and calculations indicate that Ti should partition strongly into Pt-metal (possibly as TiPt3), no Ti has ever been observed in any RPMN's. Fegley and Kornacki also noticed this discrepancy and hypothesized that the Ti was stabilized in perovskite which is a common phase in Allende CAI's.

Jurewicz, Stephen R.↗
NASA NTRS1975

Sodium sulfate: Vaporization thermodynamics and role in corrosive flames

Gaseous species over liquid Na2SO4 were identified by the technique of molecular beam mass spectrometry. The heat and entropy of vaporization of the Na2SO4 molecule were measured directly. Comparisons of the experimental entropy with values calculated using various molecular parameters were used to estimate the molecular structure and vibrational frequencies. The thermodynamic properties of gaseous and condensed phase Na2SO4, along with additional pertinent species, were used in a computer program to calculate equilibrium flame compositions and temperatures for representative turbine engine and burner rig flames. Compositions were calculated at various fuel-to-oxidant ratios with additions of sulfur to the fuel and the components of sea salt to the intake air. Temperatures for condensation of Na2SO4 were obtained as a function of sulfur and sea salt concentrations.

Kohl, F. J.↗
NASA NTRS1975

Calcium-aluminum-rich inclusions in the Allende meteorite - Evidence for a liquid origin

We have made a detailed examination of the mineralogy, textures, and assemblages of six calcium-aluminum-rich inclusions (CAI) in the Allende meteorite. They can be classified into four types - hibonite-bearing, fassaite- and olivine-bearing, feldspathoid-bearing and fassaite-bearing CAI that are hibonite and olivine free. Examples of each type appear to have crystallized from a liquid rather than by agglomeration of solid nebular condensates. Some lines of evidence for a liquid origin are the presence of spherical and ovoid shapes and rims containing minerals that are more refractory than minerals inside the inclusion. Thermodynamic calculations and comparisons with liquidus phase diagrams indicate that the CAI could have been produced by direct condensation to metastable subcooled liquids that subsequently crystallized or by remelting of an equilibrium high-temperature condensate by impact. The diopside rims in some hibonite-bearing CAI and the paucity of metal in fassaite-olivine-bearing CAI are more consistent with direct condensation of a liquid.

Blander, M.↗
NASA NTRS1978

Monte Carlo simulation of the classical two-dimensional one component plasma

Monte Carlo simulation, lattice dynamics in the harmonic approximation, and solution of the hypernetted chain equation were used to study the classical two-dimensional one component plasma. The system consists of a single species of charged particles immersed in a uniform neutralizing background. The particles interact via a l/r potential, where r is the two dimensional separation. Equations of state were calculated for both the liquid and solid phases. Results of calculation of the thermodynamic functions and one and two particle correlation functions are presented.

Gann, R. C.↗
NASA NTRS1988

Condensing, Two-Phase, Contact Heat Exchanger

Two-phase heat exchanger continuously separates liquid and vapor phases of working fluid and positions liquid phase for efficient heat transfer. Designed for zero gravity. Principle is adapted to other phase-separation applications; for example, in thermodynamic cycles for solar-energy conversion.

Cox, R. L.↗