Search NASA⌕ Search

SEARCH · Search NASA

Results for “torque density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Halting migration: Numerical calculations of corotation torques in the weakly nonlinear regime

Planets in their formative years can migrate due to the influence of gravitational torques in the protoplanetary disk they inhabit. For low-mass planets in an isothermal disk, it is known that there is a strong negative torque on the planet due to its linear perturbation to the disk, causing fast inward migration. The current investigation demonstrates that in these same isothermal disks, for intermediate-mass planets, there is a strong positive nonlinear corotation torque due to the effects of gas being pulled through a gap on horseshoe orbits. For intermediate-mass planets, this positive torque can partially or completely cancel the linear (Type I) torque, leading to slower or outward migration, even in an isothermal disk. The effect is most significant for super-Earth and sub-Jovian planets, during the transition from a low-mass linear perturber to a nonlinear gap-opening planet, when the planet has opened a so-called “partial gap,” though the precise values of these transition masses depend sensitively on the disk model (density profile, viscosity, and disk aspect ratio). In this study, numerical calculations of planet–disk interactions calculate these torques explicitly, and scalings are empirically constructed for migration rates in this weakly nonlinear regime. These results find outward migration is possible for planets with masses in the range 20–100 M{sub ⊕}, though this range depends on the disk model considered. In the disk models where torque reversal occurs, the critical planet-to-star mass ratio for torque reversal was found to have the robust scaling q{sub crit}∝√α(h/r){sup 3}, where α is the dimensionless viscosity parameter and h/r is the disk aspect ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultrafast Light-Induced Magnetoelectric Effect in van der Waals Magnetic Semiconductor Heterostructures

Atomic-scale heterostructures of van der Waals (vdW) magnets and semiconductors provide a unique environment for exploring magnetic dynamics. In contrast to typical photothermal excitation of precessional magnetization dynamics by a pump laser pulse, we find that ultrafast optical excitation of a WS2/CrGeTe3 (CGT) bilayer produces an opposite sign of magnetic torque compared to an isolated CGT film. Experimental observations by time-resolved magneto-optic Kerr effect (TR-MOKE) and theoretical analysis by density functional theory (DFT) and Landau-Lifshitz-Gilbert (LLG) simulations support a mechanism in which charge transfer of photoexcited carriers across the interface alters the perpendicular magnetic anisotropy, which in turn generates a torque on the magnetic layer to trigger precessional magnetization dynamics. These results provide new avenues for ultrafast manipulation of magnetization in vdW heterostructures with type-II band alignments. Lastly, we show that optically-generated spin currents from WS2 into CGT can also trigger precessional dynamics via angular momentum transfer.

Zhou, Wenyi [The Ohio State University]↗

Sub-Alfvenic velocity limits in magnetohydrodynamic rotating plasmas

Magnetized plasmas in shaped fields rely on large, supersonic rotation to effect centrifugal confinement of plasma along magnetic field lines. The results of experiments on the Maryland Centrifugal Experiment (MCX) [R. F. Ellis et al., Phys. Plasmas 12, 055704 (2005)] to document velocity limits are reported. Previous results have shown a limit at the Alfven speed, consistent with equilibrium limits from ideal magnetohydrodynamic theory. Another speed limit, previously reported as possibly related to a critical ionization phenomenon and depending only on the ion species and the shape of the confining magnetic field, is investigated here for a broad range of the applied parameters. We show that this speed limit manifests at sub-Alfvenic levels and that, as externally applied torques on the plasma are increased, the extra momentum input shows up as enhanced plasma density or lower momentum confinement time, accompanied by an increase in the neutral radiation level. Several key parameters are scanned, including the mirror ratio, the length between insulators, and the species mass. We show that this velocity limit is consistent with the species-dependent critical ionization velocity postulated by Alfven.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vorticity-induced flow-focusing leads to bubble entrainment in an inkjet printhead: Synchrotron x-ray and volume-of-fluid visualizations

The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial to improving print stability. Here, in the present work, we use ultrafast x-ray phase-contrast imaging and direct numerical simulations based on the volume-of-fluid method to study the mechanisms underlying the bubble entrainment in a piezoacoustic printhead. We first demonstrate good agreement between experiments and numerics. We then show the different classes of bubble pinch-off obtained in experiments, and that those were also captured numerically. The numerical results are then used to show that the baroclinic torque, which is generated at the gas-liquid interface due to the misalignment of density and pressure gradients, results in a flow-focusing effect that drives the formation of the air jet from which a bubble can pinch off.

42 ENGINEERING↗

Performance interface document for users of Tracking and Data Relay Satellite System (TDRSS) electromechanically steered antenna systems (EMSAS)

Satellites that use the NASA Tracking and Data Relay Satellite System (TDRSS) require antennas that are crucial for performing and achieving reliable TDRSS link performance at the desired data rate. Technical guidelines are presented to assist the prospective TDRSS medium-and high-data rate user in selecting and procuring a viable, steerable high-gain antenna system. Topics addressed include the antenna gain/transmitter power/data rate relationship; Earth power flux-density limitations; electromechanical requirements dictated by the small beam widths, desired angular coverage, and minimal torque disturbance to the spacecraft; weight and moment considerations; mechanical, electrical and thermal interfaces; design lifetime failure modes; and handling and storage. Proven designs are cited and space-qualified assemblies and components are identified.

Hockensmith, R.↗

Corotation of the Kronian magnetosphere

Observations of the radial variation of azimuthal plasma velocity in the inner part of the magnetosphere of Saturn show deviations from corotation occur as far in as L = 4. Major deviations from rigid corotation occur near the orbits of Rhea and Dione. Voyager-derived neutral and plasma density and temperature vs. altitude profiles in the upper atmosphere to verify that the atmospheric torque needed to drive corotation through neutral-ion coupling is available are used. It is found that the observed azimuthal velocities and calculated Pedersen conductance are consistent with one another, but that the conductance is much less than previous values estimated for Saturn and Jupiter. The lower than anticipated conductivity is attributed to the large heliocentric distance, to the absence of an active satellite (such as Jovian Io) and to a possible role of ring material in depleting the ionosphere.

Eviatar, A.↗

The formation of sharp edges in planetary rings by nearby satellites

Equations are derived which govern the shapes of the perturbed streamlines near the 'sharp edge' boundaries between regions of high and low planetary ring optical depth; these are maintained by the shepherd satellites, which transfer angular momentum to and from ring particles. The results obtained by these equations' solution with a simple numerical model, whose parameters resemble those of the Encke division, are found to faithfully reproduce the sharp edges bounding the division; they imply that the ring thickness in the unperturbed regions far from the edges is of the order of 10 m, and that the angle-averaged surface density varies on a much shorter radial length scale than that over which the satellite torque is applied. This feature's relationship to the local reversal of angular momentum viscous transport, in the most strongly perturbed regions, is demonstrated.

Borderies, Nicole↗

DSMC Simulations of Disturbance Torque to ISS During Airlock Depressurization

The primary attitude control system on the International Space Station (ISS) is part of the United States On-orbit Segment (USOS) and uses Control Moment Gyroscopes (CMG). The secondary system is part of the Russian On orbit Segment (RSOS) and uses a combination of gyroscopes and thrusters. Historically, events with significant disturbances such as the airlock depressurizations associated with extra-vehicular activity (EVA) have been performed using the RSOS attitude control system. This avoids excessive propulsive "de-saturations" of the CMGs. However, transfer of attitude control is labor intensive and requires significant propellant. Predictions employing NASA's DSMC Analysis Code (DAC) of the disturbance torque to the ISS for depressurization of the Pirs airlock on the RSOS will be presented [1]. These predictions were performed to assess the feasibility of using USOS control during these events. The ISS Pirs airlock is vented using a device known as a "T-vent" as shown in the inset in figure 1. By orienting two equal streams of gas in opposite directions, this device is intended to have no propulsive effect. However, disturbance force and torque to the ISS do occur due to plume impingement. The disturbance torque resulting from the Pirs depressurization during EVAs is estimated by using a loosely coupled CFD/DSMC technique [2]. CFD is used to simulate the flow field in the nozzle and the near field plume. DSMC is used to simulate the remaining flow field using the CFD results to create an in flow boundary to the DSMC simulation. Due to the highly continuum nature of flow field near the T-vent, two loosely coupled DSMC domains are employed. An 88.2 cubic meter inner domain contains the Pirs airlock and the T-vent. Inner domain results are used to create an in flow boundary for an outer domain containing the remaining portions of the ISS. Several orientations of the ISS solar arrays and radiators have been investigated to find cases that result in minimal disturbance torque. Figure 1 shows surface pressure contours on the ISS and a plane of number density contours for a particular case.

Lumpkin, F. E., III↗

Resonantly driven nonlinear density waves in protostellar disks

Recent observations of binary, pre-main-sequence, solar-type stars provide evidence that such systems may coexist with circumstellar disks. The binary disk systems, besides being of general interest for the study of star formation, potentially provide useful tests of companion-disk interaction theories prominent in current hypotheses of planet formation. In this paper, we apply an asymptotic analysis of the nonlinear, resonant interaction of a stellar companion with a disk to understand the dependence of such interactions on the properties of the system: the binary mass ratio, the physical properties of the disk, and the effective dissipation (treated herein as viscosity). The method is based on a WKBJ approximation and exploits the conditions that the disk is thin and much less massive than the primary, but does not require that the companion-induced disturbance be small. Both isothermal and adiabatic responses are treated. Only circular orbit resonances are considered in this paper. It is demonstrated that the temperature of the disk as well as the relative mass of the companion affects the degree of nonlinearity, and that nonlinearity promotes high wave compression ratios, long wavelengths, and increased propagation distances. Nevertheless, the total torque exerted between the companion and the disk is well represented by linear theory. The amplitudes of density disturbances are reduced by viscosity and nonisothermality. Because resonant interactions are generally strong and capable of driving rapid evolution, one might expect observations of systems undergoing strong, resonant-driven evolution to be rare. In this connection, it is pointed out that the m = 1 resonance is distinguished by being anomalously weaker than the others and is therefore of observational interest. It is speculated that, in conditions of intrinsically small dissipation, the propagation of resonant-driven density waves is limited by the tendency of their wavelength to diminish with distance, and that the propagation distance (and therefore the region of the disk to which angular momentum is redistributed) is set by the distance at which the wavelength becomes comparable to the disk thickness.

Yuan, Chi↗

The use of direct numerical simulation in the study of turbulent, chemically-reacting flows

Full turbulence simulations are used here to study the effects of chemical heat release on the large-scale structures in turbulent mixing layers. In agreement with laboratory results, it is found that the heat release lowers the rate at which the mixing layer grows and reduces the rate at which chemical products are formed. The baroclinic torque and thermal expansion in the mixing layer produce changes in the flame vortex structure that act to produce more diffuse vortices than in the constant density case, resulting in lower rotation rates of the large-scale structures. Previously unexplained anomalies observed in the mean velocity profiles of reacting jets and mixing layer are shown to result from vorticity generation by baroclinic torques. Calculations of the energy in the various wavenumbers shows that the heat release has a stabilizing effect on the growth rate of individual modes. This methodology can be applied for Reynolds numbers less than several hundred and for Damkoehler numbers less than about ten.

Riley, J. J.↗

Nonaxisymmetric evolution in protostellar disks

We present a two-dimensional, multigridded hydrodynamical simulation of the collapse of an axisymmetric, rotating, 1 solar mass protostellar cloud, which forms a resolved, hydrotastic disk. The code includes the effects of physical viscosity, radiative transfer and radiative acceleration but not magnetic fields. We examine how the disk is affected by the inclusion of turbulent viscosity by comparing a viscous simulation with an inviscid model evolved from the same initial conditions, and we derive a disk evolutionary timescale on the order of 300,000 years if alpha = 0.01. Effects arising from non-axisymmetric gravitational instabilities in the protostellar disk are followed with a three-dimensional SPH code, starting from the two-dimensional structure. We find that the disk is prone to a series of spiral instabilities with primary azimulthal mode number m = 1 and m = 2. The torques induced by these nonaxisymmetric structures elicit material transport of angular momentum and mass through the disk, readjusting the surface density profile toward more stable configurations. We present a series of analyses which characterize both the development and the likely source of the instabilities. We speculate that an evolving disk which maintains a minimum Toomre Q-value approximately 1.4 will have a total evolutionary span of several times 10(exp 5) years, comparable to, but somewhat shorter than the evolutionary timescale resulting from viscous turbulence alone. We compare the evolution resulting from nonaxisymmetric instabilities with solutions of a one-dimensional viscous diffusion equation applied to the initial surface density and temperature profile. We find that an effective alpha-value of 0.03 is a good fit to the results of the simulation. However, the effective alpha will depend on the minimum Q in the disk at the time the instability is activated. We argue that the major fraction of the transport characterized by the value of alpha is due to the action of gravitational torques, and does not arise from inherent viscosity within the smoothed particle hydrodynamics method.

Laughlin, Gregory↗

An analytic model for buoyancy resonances in protoplanetary disks

Zhu et al. found in three-dimensional shearing box simulations a new form of planet-disk interaction that they attributed to a vertical buoyancy resonance in the disk. We describe an analytic linear model for this interaction. We adopt a simplified model involving azimuthal forcing that produces the resonance and permits an analytic description of its structure. We derive an analytic expression for the buoyancy torque and show that the vertical torque distribution agrees well with the results of the Athena simulations and a Fourier method for linear numerical calculations carried out with the same forcing. The buoyancy resonance differs from the classic Lindblad and corotation resonances in that the resonance lies along tilted planes. Its width depends on damping effects and is independent of the gas sound speed. The resonance does not excite propagating waves. At a given large azimuthal wavenumber k{sub y} > h {sup –1} (for disk thickness h), the buoyancy resonance exerts a torque over a region that lies radially closer to the corotation radius than the Lindblad resonance. Because the torque is localized to the region of excitation, it is potentially subject to the effects of nonlinear saturation. In addition, the torque can be reduced by the effects of radiative heat transfer between the resonant region and its surroundings. For each azimuthal wavenumber, the resonance establishes a large scale density wave pattern in a plane within the disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Ledge-type Co/L1{sub 0}-FePt exchange-coupled composites

FePt-based exchange-coupled composites consisting of a magnetically hard L1{sub 0}-FePt phase exchange-coupled with a soft ferromagnetic material are promising candidates for future ultra-high density (>1 Tbit/in{sup 2}) perpendicular magnetic recording media, also being of interest for other applications including spin torque oscillators and micro-electro-mechanical systems, among others. In this paper, the effect of the thickness of a soft Co layer (3 < th{sub Co} < 20 nm) on the magnetic behavior of ledge-type fcc(100)-Co/L1{sub 0}(001)-FePt composites deposited on an MgO (100) substrate is systematically studied by combining morpho-structural analyses and angular magnetization measurements. Starting from a film consisting of isolated L1{sub 0}(001)–FePt islands, the ledge-type structure was obtained by depositing a Co layer that either covered the FePt islands or filled-up the inter-island region, gradually forming a continuous layer with increasing Co thickness. A perpendicular anisotropy was maintained up to th{sub Co} ∼ 9.5 nm and a significant reduction in the coercivity (about 50% for th{sub Co} ∼ 3 nm) with the increase in th{sub Co} was observed, indicating that, by coupling hard FePt and soft Co phases in a ledge-type configuration, the writability can be greatly improved. Recoil loops' measurements confirmed the exchange-coupled behavior, reinforcing a potential interest in these systems for future magnetic recording media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Vertical GaN-Based Neutral-Pointless Three-Level Inverter for High-Performance Automotive Traction Applications

Silicon Carbide (SiC) MOSFETs have emerged as a dominant solution for electric vehicle traction inverters because of their superior power density and efficiency compared to Silicon (Si) counterparts. However, SiC devices possess inherent switching speed limitations that constrain the maximum switching frequency and hinder further power density and efficiency improvements. To address these limitations, this paper proposes a vertical Gallium Nitride (vGaN) based X-type Neutral-Pointless (NPL.X) three-level (3L) inverter for an 800V, 200 kW traction system. Integrating 700V vGaN technology within the NPL.X 3L topology enables improved drive efficiency and higher switching frequencies, resulting in enhanced power density and output power quality. To evaluate the performance benefits, this work conducts a comprehensive loss characterization of the vGaN￾based NPL.X topology, providing a direct comparison with a SiC￾based two level (2L) inverter. The results show that the proposed vGaN-based inverter achieves superior efficiency, particularly within the low-torque regions that dominate standard automotive drive cycles. The proposed vGaN-based inverter represents a critical advancement toward high-power-density and high efficiency traction drives

Halawa, Ali [Purdue Univ., West Lafayette, IN (Uni↗

Velocity structure of self-similar spherically collapsed halos

Using a generalized self-similar secondary infall model, which accounts for tidal torques acting on the halo, we analyze the velocity profiles of halos in order to gain intuition for N-body simulation results. We analytically calculate the asymptotic behavior of the internal radial and tangential kinetic energy profiles in different radial regimes. We then numerically compute the velocity anisotropy and pseudo-phase-space density profiles and compare them to recent N-body simulations. For cosmological initial conditions, we find both numerically and analytically that the anisotropy profile asymptotes at small radii to a constant set by model parameters. It rises on intermediate scales as the velocity dispersion becomes more radially dominated and then drops off at radii larger than the virial radius where the radial velocity dispersion vanishes in our model. The pseudo-phase-space density is universal on intermediate and large scales. However, its asymptotic slope on small scales depends on the halo mass and on how mass shells are torqued after turnaround. The results largely confirm N-body simulations but show some differences that are likely due to our assumption of a one-dimensional phase space manifold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dzyaloshinskii-Moriya domain wall resonance in ferromagnetic nanowires with a spin-transfer torque

We theoretically investigate the current-induced domain wall resonance in ferromagnetic nanowires with a Dzyaloshinskii-Moriya interaction. The adiabatic and nonadiabatic torques distort the wall's internal structure and exert a global pressure on the wall. An effective Newton's equation is obtained analytically for a domain wall moving in one-dimensional potential and subject to a viscous friction and a driving force. Our results demonstrate that the Dzyaloshinskii-Moriya interaction affects the critical current density for depinning the wall, resonance frequency, and amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PROTOPLANETARY MIGRATION IN TURBULENT ISOTHERMAL DISKS

In order to reproduce the statistical properties of the observed exoplanets, population synthesis models have shown that the migration of protoplanets should be significantly slowed down, and that processes stalling migration should be at work. Much current theoretical efforts have thus been dedicated to find physical effects that slow down, halt or even reverse migration. Many of these studies rely on the horseshoe drag, whose long-term evolution (saturated or not) is intimately related to the disk viscosity in laminar disk models. We investigate how the horseshoe drag exerted on a low-mass planet is altered by a more realistic treatment of the turbulence in protoplanetary disks. Two-dimensional hydrodynamic simulations are performed with a turbulence model that reproduces the main turbulence properties of three-dimensional magnetohydrodynamic calculations. We find that the horseshoe drag can remain unsaturated on the long term, depending on the turbulence strength. We show that the desaturation of the horseshoe drag by turbulence can be modeled by vortensity diffusion across the time-averaged planet's horseshoe region. At low-turbulence, the running-time-averaged torque is in good agreement with the total torque obtained for an equivalent laminar model, with a similar vortensity diffusion coefficient. At high turbulence, differences arise due to the time evolution of the averaged density profile with turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin-orbit torque-driven skyrmion dynamics revealed by time-resolved X-ray microscopy

Magnetic skyrmions are topologically protected spin textures with attractive properties suitable for high-density and low-power spintronic device applications. Much effort has been dedicated to understanding the dynamical behaviours of the magnetic skyrmions. However, experimental observation of the ultrafast dynamics of this chiral magnetic texture in real space, which is the hallmark of its quasiparticle nature, has so far remained elusive. Here, we report nanosecond-dynamics of a 100nm-diameter magnetic skyrmion during a current pulse application, using a time-resolved pump-probe soft X-ray imaging technique. We demonstrate that distinct dynamic excitation states of magnetic skyrmions, triggered by current-induced spin-orbit torques, can be reliably tuned by changing the magnitude of spin-orbit torques. Our findings show that the dynamics of magnetic skyrmions can be controlled by the spin-orbit torque on the nanosecond time scale, which points to exciting opportunities for ultrafast and novel skyrmionic appl ications in the future.

36 MATERIALS SCIENCE↗