Search NASA⌕ Search

SEARCH · Search NASA

Results for “tungsten radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Programmable hyperbolic polaritons in van der Waals semiconductors

Lighting a route for hyperbolic dispersion The propagation of light within a material is usually well defined, with the propagation described by scattering and dispersion. In artificially designed metamaterials and in anisotropic layered materials, the dispersion can be hyperbolic, giving rise to subwavelength confinement of the light. Sternbach et al. show that the hyperbolic dispersion can be optically switched on and off on demand in the layered transition metal dichalcogenide tungsten diselenide (see the Perspective by Deng and Chen). Illuminating the material with ultrafast pulses of sub-bandgap light creates a transient waveguide, resulting in hyperbolic dispersion in the material. The ability to tune the dispersion characteristics on demand using optical pumping is an effective approach for developing ultrafast switching photonic devices and controlling the propagation of light on the nanoscale. Science , this issue p. 617 ; see also p. 572

Science & Technology - Other Topics↗
NASA NTRS1981

Preliminary design study of solar probe heat shields

The requirements, constraints, design guidelines, and expected performances of heat-shield systems for a solar probe are analyzed. A multiple-stage, asymmetric, right-angle radiation cascade configuration is used as the basis for comparison. Output-to-input radiative flux ratios are first calculated for a system employing gray surfaces. Assuming that the temperature of the inner surface of the payload bus is allowed to reach 400 K, it is shown that four- and five-stage cascade systems employing graphite can approach, respectively, to within about 5.5 and 4 solar radii of the sun. The systems using slip-cast silica and tungsten are then analyzed accounting for the degradation of surface-optical performance caused by the solar wind. It is shown that two- and three-stage silica-tungsten systems can approach, respectively, to within 4 and 3 solar radii of the sun.

Park, C.↗
DOE OSTI2024

Spectro-electrochemistry of vanadium ions in LiCl-KCl-VCl2,3

Owing to their relatively high thermal conductivity and corrosion resistance, and low radiation heating and embrittlement properties, vanadium (V) alloys are being considered for fusion blanket structural materials. As such, the fundamental behavior of these materials, including the speciation of their corrosion products in molten lithium salts, must be elucidated to enable quantitative lifetime prediction. Yuan et al. [REF#1] demonstrated the reduction and oxidation of vanadium ions in molten LiCl-KCl eutectic salt using a tungsten wire, indicating the possibility of metallic vanadium reduction from V3+ negative potentials

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Radiation Damage Analysis of FNSF Components Using McCad and MCNP

The Fusion Energy System Studies Fusion Nuclear Science Facility (FESS-FNSF) concept represents a transitional step between ITER and a commercial fusion power plant. The FNSF is a conceptualized D-T fueled tokamak with 518 MW of fusion power that has been extensively used to explore and optimize design features. The energetic 14.1-MeV neutrons can produce significant localized heating and activations, and can cause damage to plasma-facing components, which can determine maintenance/outage scheduling needs and also impact the lifetime of the device as a whole. This study illustrates a neutronics analysis that was conducted on a 22.5-degree symmetric sector of the FNSF with the goal of understanding the neutron heating and radiation damage that can be characterized by quantifying the displacements per atom (dpa). Concurrently, this study also focused on the development of analysis capabilities by converting a three-dimensional computer-aided design model of the FNSF into MCNP6.2 input using the McCad code. Accordingly, some confirmatory results on tritium production and the tritium breeding ratio (TBR) are provided to support model validation. The results produced by MCNP6.2 simulations showed that the highest heating and damage occurred in the outboard region, which concentrated approximately 290 MW of the total nuclear heating, in contrast to 97 MW within the inboard region. These results are consistent with previous studies that employed earlier versions of the FNSF concept and different modeling approaches. Furthermore, this study also provides additional details on neutron wall loading, as well as total heating from neutrons and gammas, results which show the total heating of the device (16 sectors) is approximately 477.83 ± 0.80% MW, indicating a neutron energy multiplication factor of 1.15. Additionally, the capability to calculate hydrogen and helium production, as well as dpa, is illustrated. Finally, the neutronics effects of using alternative materials to tungsten carbide were evaluated for the vacuum vessel, low-temperature shield, and structural ring components, which showed that compounds like YH 2 , Mg(BH 4 ) 2 , and ZrH 2 could reduce the total heating on the magnet and also reduce the TBR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Laser-driven x-ray and proton micro-source and application to simultaneous single-shot bi-modal radiographic imaging

Radiographic imaging with x-rays and protons is an omnipresent tool in basic research and applications in industry, material science and medical diagnostics. The information contained in both modalities can often be valuable in principle, but difficult to access simultaneously. Laser-driven solid-density plasma-sources deliver both kinds of radiation, but mostly single modalities have been explored for applications. Their potential for bi-modal radiographic imaging has never been fully realized, due to problems in generating appropriate sources and separating image modalities. Here, we report on the generation of proton and x-ray micro-sources in laser-plasma interactions of the focused Texas Petawatt laser with solid-density, micrometer-sized tungsten needles. We apply them for bi-modal radiographic imaging of biological and technological objects in a single laser shot. Thereby, advantages of laser-driven sources could be enriched beyond their small footprint by embracing their additional unique properties, including the spectral bandwidth, small source size and multi-mode emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Characterization of the Earth Radiation Budget Experiment radiometers

The Earth Radiation Budget Experiment (ERBE) scanning radiometers were used to measure the earth's radiation fields during the period November 1984 through February 1990. The ERBE radiometric packages were placed into orbit aboard the Earth Radiation Budget Satellite (ERBS) and the NOAA-9 and NOAA-10 spacecraft platforms. In each radiometric package, thermistor bolometers were used as detection elements for the broadband total (0,2 - 50,0 microns), shortwave (0,2 - 5,0 microns), and longwave (5,0 - 50,0 microns) spectral regions. Flight calibration facilities were built into each of the spacecraft radiometric packages. The flight facilities consisted of black bodies, tungsten lamps, and silicon photodiodes. The black bodies and tungsten lamps were found to be reliable at precision levels approaching 0,5 percent over a five-year period. The photodiodes were found to degrade more than 2 percent during the first year in orbit. In this paper, the flight calibration systems for the ERBE scanning radiometers are described along with the resultant measurements.

Lee, R. B., III↗
DOE OSTI2025

Basic Physical Processes Involving Dust in Fusion Plasmas

This report presents the main outcomes of our research focused on understanding the behavior and effects of dust particles in fusion plasmas, particularly in the edge regions of tokamaks and stellarators. We conducted computer modeling studies of burst injections of carbon and tungsten dust particles in DIII-D like divertor plasmas. The studies investigated effects of transient influx of the low- and high-Z material plasma contaminants in form of dust on the edge plasma dynamics in a modern mid-size tokamak. We also performed theoretical and computational studies of the forces acting on non-spherical dust grains in magnetized and nonmagnetized plasmas. In addition, we cooperated with General Atomics slag management group on development of DIII-D dust injection experiments to measure trajectories of dust grains in the divertor plasma and compare them with DUSTT code predictions for validation of the dust modeling capabilities. We collaborated with JET experimentalists on evaluation of radiative losses induced by injection of mixed neon-deuterium ice pellets for disruption and run-away electron generation mitigation during thermal and current quench phases. We also cooperated with experimentalists at LHD fusion device (Japan) on modeling support of experiments on injection of boron granules in fusion plasma discharges to assess their dynamics and effectiveness for in situ dynamic wall conditioning.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Neutronics Analysis of Shielding Material Alternative to Tungsten Carbide in the FESS-FNSF Facility

Neutron transport calculations have been performed on advanced shielding materials. Metal hydrides and borohydrides were evaluated to find an alternative to tungsten carbide (WC), which is used in the in-vessel components. The study was conducted using a 22.5° sector and a detailed 360° geometry of the Fusion Energy System Studies-Fusion Nuclear Science Facility (FESS-FNSF) using OpenMC and FENDL-3.2b nuclear data library. Here, the neutronics analysis in this article was concentrated on calculating total nuclear (neutron and photon) heating at the magnet and the radiation damage of the inboard vacuum vessel (IBVV). For example, yttrium hydride (YH 2 ) and vanadium hydride (VH 2 ) showed lower radiation damage values compared to WC and other metals. Whereas alternative shielding materials did not show a significant change in the magnet nuclear heating.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Second Target Station High-Fidelity Target Activation Comparison

The development of the Second Target Station (STS) target system at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) is well underway. The target system at STS consists of a rotating target disk that contains 21 segments of tungsten clad in tantalum clad in steel. A key aspect of the design of the target system is to account for the delayed heating and material damage caused by the delayed dose from decaying radionuclides. These radionuclides are a product of either spallation reactions or transmutation of the nuclei in the target system. These radionuclides build up in the target system components over the lifetime of the facility, and the radiation that is emitted can deposit energy in the components causing significant component heating and material damage. Monte Carlo N-Particle (MCNP) Version 6.2 transports the various particle species and calculates the spallation products and neutron fluxes throughout the target system. These spallation products and neutron fluxes along with the material definition of each component are relayed to the CINDER2008 transmutation code to calculate the radionuclide inventories and the corresponding decay gamma emission spectra. MCNP6.2 coupled with CINDER2008 is the computational method-of-choice for the analysis discussed in the following sections of this report. The analysis focuses on validating major assumptions in calculating the radionuclide inventory in the STS target system: all of the target segments are fresh, unirradiated material when the protons are incident on the segment, the average of the 21 segments of the target is sufficient to represent a single segment, and that averaging the proton pulse structure over time does not significantly affect the radionuclide inventory. The position-averaged, high-fidelity, and single-tally computational methods are used to validate the assumptions and provide a point of comparison to evaluate how the assumptions impact the radionuclide inventories. A more detailed explanation of the three computational methods is provided in Section 2. The position-averaged and single-tally methods are less computationally expensive when compared with the high-fidelity method where 54,000 individual calculations are needed to calculate 1 hr of STS operation. Section 3 details the comparison of the three methods to show that the assumptions made in the position-averaged method do not significantly impact the radionuclide inventory after 1 hr of operation. The discussions and results in this report are for 1 hr of operation. Due to the computational cost associated with calculating the transmutation and activation using the high-fidelity method, only 1 hr of operation has been calculated. The discrepancies observed after 1 hr of operation are not extrapolated out to longer operational times, and this report does not address how the discrepancies between the computational methods may manifest for longer operational periods.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Electron-impact excitation data for W 2+ in support of tungsten spectroscopy and re-deposition measurements for magnetically-confined plasmas

Abstract To better understand plasma wall interactions involving tungsten, accurate atomic structure and electron-impact driven collisional processes for near-neutral ion stages of tungsten are required. Complementing existing work on neutral and singly ionised tungsten, atomic structure and collisional calculations for W 2+ electron-impact excitation have been completed. These excitation calculations are an important component of S/XB coefficients for near-neutral charge states, which may be used to spectroscopically infer re-deposition of tungsten at the plasma-solid boundary of fusion relevant devices. With W 2+ in particular having emission lines that can be observed at ultraviolet (UV) wavelengths, while higher charge states of tungsten are unlikely to have lines possible to observe outside of the vacuum UV range. The atomic structure was generated using the General-purpose Relativistic Atomic Structure Package (GRASP 0 ), implementing the Multi-configuration Dirac Fock approach. This structure was the basis for a subsequent Dirac R -matrix electron-impact excitation calculation to provide Maxwellian averaged rate coefficients. A synthetic spectrum was generated from this data using a collisional-radiative model to predict the strongest W III spectral lines and these lines were compared to emission from the Compact Toroidal Hybrid (CTH) plasma device. Several of the strongest W III lines are observed in CTH and agree well with the modelled line wavelengths and intensities, a table of these lines is provided that could be observed in other devices.

McCann, M. (ORCID:0000000215321240)↗
NASA NTRS1971

Vacuum ultraviolet radiometry with a stabilized hydrogen arc.

Use of the spectral radiation emitted from a dense hydrogen plasma of at least 12,000 K, which is in local thermodynamic equilibrium (LTE), as a light source for vacuum UV radiometry. Its spectroscopic qualities are exactly known, and except for a few strongly Stark-broadened Lyman lines, its spectrum in the vacuum UV is essentially continuous. The calculated continuum output of this source for typical operating conditions is compared with the UV output of the tungsten strip lamp and the carbon arc.

Ott, W. R.↗
DOE OSTI2024

Measurements of displacement cross sections of metals for 120-GeV proton beam irradiation

The number of displacements per atom (dpa) is widely used as an indicator of irradiation damage of materials in proton accelerator facilities. Experiments have been carried out to validate the dpa of metallic materials for protons with energies below 3 GeV. However, measurements of the displacement cross-sections for high-energy protons above 3 GeV have not been carried out and the calculations have not been validated. To validate the displacement cross section of metals in high-energy region, electrical resistivity changes in wires of aluminum, copper and tungsten at 8 K were measured using protons with energies of 120-GeV. The results show that the Norgett-Robinson-Torrens dpa model of the Particle and Heavy Ion Transport Calculation Code overestimates the experimental data. On the other hand, the calculated results using the athermal recombination corrected dpa model were in agreement with the measured displacement cross sections. In the proton energy region above 1 GeV, the displacement cross section is almost constant, which is due to the fact that the damage energy of the material under 1 GeV proton irradiation is almost the same as under 120 GeV proton irradiation. Damage recovery of defects accumulated in the sample was also measured using isochronal annealing: At 80 K, approximately 60 % and 80 % of the damage remains for copper and tungsten, respectively. These results are the same as those obtained from other experiments on proton and neutron irradiation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

WEST full tungsten operation with an ITER grade divertor

The mission of WEST (tungsten-W Environment in Steady-state Tokamak) is to explore long pulse operation in a full tungsten (W) environment for preparing next-step fusion devices (ITER and DEMO) with a focus on testing the ITER actively cooled W divertor in tokamak conditions. Following the successful completion of phase 1 (2016-2021), phase 2 started in December 2022 with the lower divertor made entirely of actively cooled ITER-grade tungsten mono-blocks. A boronization prior the first plasma attempt allowed for a smooth startup with the new divertor. Despite the reduced operating window due to tungsten, rapid progress has been made in long pulse operation, resulting in discharges with a pulse length of 100 s and an injected energy of around 300 MJ per discharge. Plasma startup studies were carried out with equatorial boron nitride limiters to compare them with tungsten limiters, while Ion Cyclotron Resonance Heating assisted startup was attempted. High fluence operation in attached regime, which was the main thrust of the first campaigns, already showed the progressive build up of deposits and appearance of dust, impacting the plasma operation as the plasma fluence increased. In total, the cumulated injected energy during the first campaigns reached 43 GJ and the cumulated plasma time exceeded 5 h. Demonstration of controlled X-Point Radiator regime is also reported, opening a promising route for investigating plasma exhaust and plasma-wall interaction issues in more detached regime. This paper summarises the lessons learned from the manufacturing and the first operation of the ITER-grade divertor, describing the progress achieved in optimising operation in a full W environment with a focus on long pulse operation and plasma wall interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A Brief Review of the Impact of Neutron Irradiation Damage in Tungsten and Its Alloys

Neutron irradiation poses a substantial challenge in the development and application of tungsten (W) and its alloys, predominantly in the framework of nuclear fusion and fission environments. Although W is well-acknowledged for its unique properties like its high melting temperature and higher resistance to sputtering, transmutation products, such as Re and Os, form and impact the alloy properties as a result of neutron irradiation. This transmutation effect accompanied by significant microstructure damage due to neutron irradiation can lead to the significant degradation of mechanical properties. This review surveys the literature focusing on the microstructural modifications post-irradiation and its impacts on the irradiation hardening. This review provides insights into the elaborative understanding on the neutron radiation damage on W and W alloys by exploring the microstructural evolution and hardness changes post-irradiation. The gaps and future opportunities for understanding neutron radiation damage in W are briefly summarized.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of Chemical Procedures for Isotope Harvesting: Separation of Trace Hafnium from Tungsten

The separation of trace hafnium from bulk tungsten alloys is of interest for isotope harvesting at the National Superconducting Cyclotron Laboratory and the Facility for Rare Ion Beams because 172 Hf, the parent of 172 Lu, accumulates in tungsten alloy beam blockers at these facilities. In this work, a procedure for the separation of trace hafnium from a bulk tungsten alloy (454 g) was established using tracer isotopes ( 175 Hf, 88 Zr, 173 Lu, and 88 Y). Here, the procedure employed dissolution in an HF–HNO 3 solution followed by a calcium fluoride precipitation, and then extraction chromatography was used for more selective separation steps. Two stages of column separations using LN resin (HDEHP based) and TRU resin (CMPO based) were performed. Gamma-ray spectroscopy and mass spectrometry were used to analyze the final hafnium sample and follow the steps in the chemical processing. Furthermore, the final recovery of hafnium was high (90 ± 8)%, and the mass of tungsten and other transition metals was reduced to near background levels (as determined by ICP-MS of the blank acid solutions). Zirconium follows hafnium quantitatively in this procedure; there was no detectable 173 Lu in the final hafnium sample.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1984

Thermal investigation of an electrical high-current arc with porous gas-cooled anode

The following guantities were measured on a high-intensity electric arc with tungsten cathode and transpiration-cooled graphite anode burning in argon: electric current and voltage, cooling gas flow rate (argon), surface temperature of the anode and of the anode holder, and temperature profile in three cross-sections of the arc are column. The last mentioned values were obtained from spectroscopic photographs. From the measured quantities, the following values were calculated: the heat flux into the anode surface, the heat loss of the anode by radiation and conduction, and the heat which was regeneratively transported by the cooling gas back into the arc space. Heat balances for the anode were also obtained. The anode losses (which are approximately 80% of the total arc power for free burning arcs) were reduced by transpiration cooling to 20%. The physical processes of the energy transfer from the arc to the anode are discussed qualitatively.

Eckert, E. R. G.↗
NASA NTRS1992

Absolute calibration of an ultraviolet spectrometer using a stabilized laser and a cryogenic cavity radiometer

We carry out the calibration of an ultraviolet spectrometer by using a cryogenic electrical-substitution radiometer and intensity-stabilized laser sources. A comparison of the error budgets for the laser-based calibration described here and for a calibration using a type-FEL tungsten spectral-irradiance standard indicates that this technique could provide an improvement of a factor of about three in the uncertainty of the spectrometer calibration, resulting in an absolute accuracy (standard deviation of three) of about 1 percent at 257 nm. The technique described here might significantly improve the accuracy of calibrations on NASA ozone-monitoring and solar ultraviolet-monitoring spectrophotometers when used to complement present procedures that employ lamps and the SURF II synchrotron ultraviolet radiation facility at the National Institute of Standards and Technology.

Jauniskis, L.↗
DOE OSTI2025

Active Divertor Heat Flux Control using Impurity Powder Dropper

Divertor plasma-facing components (PFCs) in a tokamak are typically designed to withstand average steady-state heat loads of about 5–10 MW/m 2 , a limit that applies to both solid and liquid lithium (LL) PFCs. Exceeding these design values can result in surface damage to tungsten PFCs or excessive lithium (Li) evaporation in liquid lithium divertor (LLD) PFCs. Since exceeding the divertor heat load limits has serious consequences, it is therefore prudent to develop a tool to reduce the divertor heat load and bring the heat load to within the design limit without affecting the plasma performance. Active low Z impurity injection such as Li has been suggested as a potential solution to mitigate excess heat flux as suggested previously, given that non-coronal radiation can be quite large ~ 20–30 MJ per mole of injected Li. Li is considered desirable for reducing the edge neutral recycling helping to improve plasma energy confinement. In this paper, we model the Impurity Power Dropper (IPD) to investigate its potential of divertor heat flux control. The IPD is typically located at the top of the tokamak device and uses a vertical drift tube of a few meters. In the 2 m drift tube case, the IPD powder is accelerated to ~ 6 m/sec before reaching the plasma with the upper divertor configuration, matching the condition for the in-board side pellet injection case. By modeling the IPD geometry we determined the IPD powder deposition profile, and thus the non-coronal radiation and ionization profiles in time as well. From the enhanced radiation power loss, it is therefore possible to reduce the divertor heat load using the divertor simulation code. In conclusion, the IPD divertor heat flux control can be tested in the facilities with IPD including ST-40, DIII-D, EAST, WEST and NSTX-U.

Active lithium injection↗