Search NASA⌕ Search

SEARCH · Search NASA

Results for “unstructured grids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Balanced Central Schemes for the Shallow Water Equations on Unstructured Grids

We present a two-dimensional, well-balanced, central-upwind scheme for approximating solutions of the shallow water equations in the presence of a stationary bottom topography on triangular meshes. Our starting point is the recent central scheme of Kurganov and Petrova (KP) for approximating solutions of conservation laws on triangular meshes. In order to extend this scheme from systems of conservation laws to systems of balance laws one has to find an appropriate discretization of the source terms. We first show that for general triangulations there is no discretization of the source terms that corresponds to a well-balanced form of the KP scheme. We then derive a new variant of a central scheme that can be balanced on triangular meshes. We note in passing that it is straightforward to extend the KP scheme to general unstructured conformal meshes. This extension allows us to recover our previous well-balanced scheme on Cartesian grids. We conclude with several simulations, verifying the second-order accuracy of our scheme as well as its well-balanced properties.

Bryson, Steve↗

Finite Volume schemes on unstructured grids for non-local models: Application to the simulation of heat transport in plasmas

In the so-called Spitzer-Haerm regime, equations of plasma physics reduce to a nonlinear parabolic equation for the electronic temperature. Coming back to the derivation of this limiting equation through hydrodynamic regime arguments, one is led to construct a hierarchy of models where the heat fluxes are defined through a non-local relation which can be reinterpreted as well by introducing coupled diffusion equations. We address the question of designing numerical methods to simulate these equations. The basic requirement for the scheme is to be asymptotically consistent with the Spitzer-Haerm regime. Furthermore, the constraints of physically realistic simulations make the use of unstructured meshes unavoidable. We develop a Finite Volume scheme, based on Vertex-Based discretization, which reaches these objectives. We discuss on numerical grounds the efficiency of the method, and the ability of the generalized models in capturing relevant phenomena missed by the asymptotic problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new high-order spectral difference method for simulating viscous flows on unstructured grids with mixed-element meshes

In the present study, a spectral difference (SD) method is developed for viscous flows on meshes with a mixture of triangular and quadrilateral elements. The standard SD method for triangular elements, which employs Lagrangian interpolating functions for fluxes, is not stable when the designed accuracy of spatial discretization is third order or higher. Unlike the standard SD method, the method examined here uses vector interpolating functions in the Raviart-Thomas (RT) spaces to construct continuous flux functions on reference elements. The spectral-difference Raviart-Thomas (SDRT) method was originally proposed by Balan et al. and implemented on triangular-element meshes for invisid flow only. Our present results demonstrated that the SDRT method is stable and high-order accurate in two dimensions (2D) for a number of test problems by using triangular-, quadrilateral-, and mixed-element meshes for both inviscid and viscous flows. A stability analysis is also performed for mixed elements. Furthermore, we found our current SDRT scheme is stable for fourth-order accurate spatial discretizations. However, a stable fifth-order SDRT scheme remains to be identified.

97 MATHEMATICS AND COMPUTING↗

Mimetic Theory for Cell-Centered Lagrangian Finite Volume Formulation on General Unstructured Grids

A finite volume cell-centered Lagrangian scheme for solving large deformation problems is constructed based on the hypo-elastic model and using the mimetic theory. Rigorous analysis in the context of gas and solid dynamics, and arbitrary polygonal meshes, is presented to demonstrate the ability of cell-centered schemes in mimicking the continuum properties and principles at the discrete level. A new mimetic formulation based gradient evaluation technique and physics-based, frame independent and symmetry preserving slope limiters are proposed. Furthermore, a physically consistent dissipation model is employed which is both robust and inexpensive to implement. The cell-centered scheme along with these additional new features are applied to solve solids undergoing elasto-plastic deformation.

42 ENGINEERING↗

A Pipeline for Large Data Processing Using Regular Sampling for Unstructured Grids

Large simulation data requires a lot of time and computational resources to compute, store, analyze, visualize, and run user studies. Today, the largest cost of a supercomputer is not hardware but maintenance, in particular energy consumption. Our goal is to balance energy consumption and cognitive value of visualizations of resulting data. This requires us to go through the entire processing pipeline, from simulation to user studies. To reduce the amount of resources, data can be sampled or compressed. While this adds more computation time, the computational overhead is negligible compared to the simulation time. We built a processing pipeline at the example of regular sampling. The reasons for this choice are two-fold: using a simple example reduces unnecessary complexity as we know what to expect from the results. Furthermore, it provides a good baseline for future, more elaborate sampling methods. We measured time and energy for each test we did, and we conducted user studies in Amazon Mechanical Turk (AMT) for a range of different results we produced through sampling.

97 MATHEMATICS AND COMPUTING↗

A Multigrid Framework for SN Discretizations of the Boltzmann Transport Equation with Application to Spatially Unstructured Grids

The space-angle multiple/semi-coarsening multigrid methods of [3] for S n discretizations of the Boltzmann transport equation was developed assuming rediscretizations of the streaming collision operators on the coarser spatial grids. These rediscretized operators are directly used in the kernels of the spatial coarse-level scalar flux integral equations, which undergo the multigrid process. Since the computation is essentially performed on these integral equations, it appears that the multigrid procedure is applied directly to the finest level scalar flux integral equation, rather than to the finest level S n system. However, this procedure is actually applied implicitly to the finest level S n system, though it would be beneficial to directly relate the multiple/semi-coarsening methods to the full S n system: being able to relate the multigrid procedure directly to the full S n system will lead to a general framework that can help guide the development of multigrid algorithms for more general S n discretization settings, such as when spatial rediscretization of the integral equation kernel can not be applied. In this latter case, applying an operator-dependent Galerkin coarsening procedure to the integral operator is difficult, if not realizable, because the kernel is dense and often given by its action of numerically sweeping over all the streaming-collision operators. In this paper, we develop and analyze such a multigrid framework for the S n system. We further relate this framework to a multigrid scheme that directly coarsens the scalar flux integral equation using a Galerkin coarsening approach. For this approach, we show that an intricate operator-dependent Galerkin coarsening procedure may not be needed. In particular, this paper develops a Galerkin-principle framework for S n discretizations of the Boltzmann equation, of which the analysis shows that simple interpolation operators can be used to coarsen the integral equations operators arising from the space-angle multiple/semi-coarsening methods.

97 MATHEMATICS AND COMPUTING↗

OpenACC directive-based GPU acceleration of an implicit reconstructed discontinuous Galerkin method for compressible flows on 3D unstructured grids

In this study, we use a combination of modeling techniques to describe the relationship between fracture radius that might be accomplished in a hypothetical enhanced geothermal system (EGS) and drilling distance required to create and access those fractures. We use a combination of commonly applied analytical solutions for heat transport in parallel fractures and 3D finite-element method models of more realistic heat extraction geometries. For a conceptual model involving multiple parallel fractures developed perpendicular to an inclined or horizontal borehole, calculations demonstrate that EGS will likely require very large fractures, of greater than 300 m radius, to keep interfracture drilling distances to ~10 km or less. As drilling distances are generally inversely proportional to the square of fracture radius, drilling costs quickly escalate as the fracture radius decreases. It is important to know, however, whether fracture spacing will be dictated by thermal or mechanical considerations, as the relationship between drilling distance and number of fractures is quite different in each case. Information about the likelihood of hydraulically creating very large fractures comes primarily from petroleum recovery industry data describing hydraulic fractures in shale. Those data suggest that fractures with radii on the order of several hundred meters may, indeed, be possible. The results of this study demonstrate that relatively simple calculations can be used to estimate primary design constraints on a system, particularly regarding the relationship between generated fracture radius and the total length of drilling needed in the fracture creation zone. Comparison of the numerical simulations of more realistic geometries than addressed in the analytical solutions suggest that simple proportionalities can readily be derived to relate a particular flow field.

15 GEOTHERMAL ENERGY↗

A New High-Order Spectral Difference Method for Simulating Viscous Flows on Unstructured Grids with Mixed Elements

In the present study, a new spectral difference (SD) method is developed for viscous flows on meshes with a mixture of triangular and quadrilateral elements. The standard SD method for triangular elements, which employs Lagrangian interpolating functions for fluxes, is not stable when the designed accuracy of spatial discretization is third-order or higher. Unlike the standard SD method, the method examined here uses vector interpolating functions in the Raviart-Thomas (RT) spaces to construct continuous flux functions on reference elements. Studies have been performed for 2D wave equation and Euler equa- tions. Our present results demonstrated that the SDRT method is stable and high-order accurate for a number of test problems by using triangular-, quadrilateral-, and mixed- element meshes.

17 WIND ENERGY↗

Algebraic turbulence models for the computation of two-dimensional high speed flows using unstructured grids

The incorporation of algebraic turbulence models in a solver for the 2-D compressible Navier-Stokes equations using triangular grids is described. A practical way to use the Cebeci Smith model, and to modify it in separated regions is proposed. The ability of the model to predict high speed, perfect gas boundary layers is investigated from a numerical point of view.

Rostand, Philippe↗

Algebraic turbulence models for the computation of two-dimensional high-speed flows using unstructured grids

The incorporation of algebraic turbulence models in a solver for the 2-D compressible Navier-Stokes equations using triangular grids is described. A practial way to use the Cebeci Smith model, and to modify it in separated regions is proposed. The ability of the model to predict high speed, perfect gas boundary layers is investigated from a numerical point of view.

Rostand, Philippe↗

Generation and adaptation of 3-D unstructured grids for transient problems

Grid generation and adaptive refinement techniques suitable for the simulation of strongly unsteady flows past geometrically complex bodies in 3-D are described. The grids are generated using the advancing front technique. Emphasis is placed not to generate elements that are too small, as this would severely increase the cost of simulations with explicit flow solvers. The grids are adapted to an evolving flowfield using simple h-refinement. A grid change is performed every 5 to 10 timesteps, and only one level of refinement/coarsening is allowed per mesh change.

Loehner, Rainald↗