Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

The development of convective instability, wind shear, and vertical motion in relation to convection activity and synoptic systems in AVE 4

Data from the Fourth Atmospheric Variability Experiment were used to investigate conditions/factors responsible for the development (local time rate-of-change) of convective instability, wind shear, and vertical motion in areas with varying degrees of convective activity. AVE IV sounding data were taken at 3 or 6 h intervals during a 36 h period on 24-25 April 1975 over approximately the eastern half of the United States. An error analysis was performed for each variable studied.

Davis, J. G.↗

Cloud encounter and particle density variabilities from GASP data

Summary statistics and variability studies are presented for cloud encounter and particle number density data as part of the NASA Global Atmospheric Sampling Program (GASP) aboard commercial Boeing 747 airliners. On the average, cloud encounter is shown on about 15% of the 52,164 data samples available; this value varies with season, latitude, synoptic weather situation, and distance from the tropopause. The number density of particles (diameter greater than 3 microns) also varies with time and location, and depends on the horizontal extent of cloudiness.

Nastrom, G. D.↗

Airframe-propulsion system aerodynamic interference predictions at high transonic Mach numbers including off-design engine airflow effects

The transonic speed regime for airplanes at conditions where inlet spillage takes place is discussed. A wind tunnel test program to evaluate aerodynamic performance penalties associated with propulsion system installation and operation at subsonic through low supersonic speeds was conducted. The accuracy of analytic methods for predicting transonic engine airframe interference effects was assessed. Study variables included Mach number, angle of attack, relative nacelle location, and nacelle mass flow ratio. Results include test theory comparisons of forces as well as induced pressure fields. Prediction capability of induced shock wave strength and locations is assessed. It was found that large interference forces due to engine location and flow spillage occur at transonic speeds, that theory explains these effects; and that theory can predict quantitatively these effects.

Kulfan, R. M.↗

Cloud-encounter and particle-concentration variabilities from GASP data

Summary statistics, tabulations, and variability studies are presented for cloud encounter and particle concentration data taken as part of the NASA global atmospheric sampling program. Cloud encounter was experienced in about 15 percent of the data samples; however, the percentage varies with season, latitude, and altitude (particularly distance from the tropopause). In agreement with classical storm models, the data show more clouds in the upper troposphere in anticyclones than in cyclones. The concentration of particles with a diameter greater than 3 micron also varies with time and location, depending primarily on the horizontal extent of cloudiness. Some examples of the application of the statistical data to the estimation of the frequency of cloud encounter and laminar flow loss to be expected on long range airline routes are also presented.

Nastrom, G. D.↗

Development and demonstration of manufacturing processes for fabricating graphite/Larc-160 polyimide structural elements, part 4, paragraph B

Progress in the development of processes for production of Celion/LARC-160 graphite-polyimide materials, quality control, and the fabrication of Space Shuttle composite structure components is reported. Liquid chromatographic analyses of three repeatibility batches were performed and are compared to previous Hexcel standard production and to variables study LARC-160 intermediate resins. Development of processes for chopped fiber molding are described and flexural strength, elastic modulus, and other physical and mechanical properties of the molding are presented.

Source record↗

NASA mechanical impact testing in high-pressure oxygen

Three independently developed high-pressure gaseous oxygen mechanical impact testers have been used to evaluate materials for the Space Shuttle Program. A test program evaluating the performance of these test systems is described. The gaseous and liquid oxygen test procedures and equipment are considered along with the material selection procedures. The results of the NASA mechanical impact tester variability study are presented, including penetration function curves and curve parameters and equivalent energies and comparisons of high-pressure testers at ambient pressure and temperature, ambient temperature and 34 MPa, and cryogenic temperature and 34 MPa. Finally, a summary of NASA mechanical impact test data is presented.

Bryan, C. J.↗

Evaluation of the solar disk sextant concept

In this paper the viability of the solar disk sextant concept is evaluated, the optimum parameters required to carry out solar variability studies, which are the mission objectives, are derived. The experimental environment is first discussed, followed by the application of the finite Fourier transform definition (FFTD) to the detector array data. The requirements on the optical system are studied next. A computer program was carried out simulating solar edge data and FFTD. From this study, it is concluded that the required accuracy of measurement may be reached using currently available detector array technology, a focal ratio of the optical system in excess of 90, and an entrance aperture of 22 cm. The guidance error must be small enough to require no more than a correction rate of 0.1 arcsec/sec. All these conditions are well within current technology.

Chiu, H.-Y.↗

Thermal aging effects in refractory metal alloys

The alloys of niobium and tantalum are attractive from a strength and compatibility viewpoint for high operating temperatures required in materials for fuel cladding, liquid metal transfer, and heat pipe applications in space power systems that will supply from 100 kWe to multi-megawatts for advanced space systems. To meet the system requirements, operating temperatures ranging from 1100 to 1600 K have been proposed. Expected lives of these space power systems are from 7 to 10 yr. A program is conducted at NASA Lewis to determine the effects of long-term, high-temperature exposure on the microstructural stability of several commercial tantalum and niobium alloys. Variables studied in the investigation include alloy composition, pre-age annealing temperature, aging time, temperature, and environment (lithium or vacuum), welding, and hydrogen doping. Alloys are investigated by means of cryogenic bend tests and tensile tests. Results show that the combination of tungsten and hafnium or zirconium found in commercial alloys such as T-111 and Cb-752 can lead to aging embrittlement and increased susceptibility to hydrogen embrittlement of ternary and more complex alloys. Modification of alloy composition helps to eliminate the embrittlement problem.

Stephens, J. R.↗

Wet oxidation of a spacecraft model waste

Wet oxidation was used to oxidize a spacecraft model waste under different oxidation conditions. The variables studied were pressure, temperature, duration of oxidation, and the use of one homogeneous and three heterogeneous catalysts. Emphasis is placed on the final oxidation state of carbon and nitrogen since these are the two major components of the spacecraft model waste and two important plant nutrients.

Johnson, C. C.↗

Some lessons learned with wind tunnels

An historical evaluation is made of the most significant developments in the use of wind tunnels for the development and analysis of missiles and aircraft since the 1940s. In addition to being instrumental in the discovery of unknown aerodynamic, aeroelastic and aerothermodynamic phenomena, wind tunnels have helped in the explanation of numerous effects, the development of new configurations and systems, and the furnishing of critical initial performance evaluations for a broad spectrum of aircraft and missiles. Attention is given to low speed planform tests, body-wing-tail studies, variable sweep wing investigations, transonic characteristics and problems, supersonic trim drag, and supersonic pitch-up, area ruling, and inlet effects.

Spearman, M. L.↗

Thermal aging effects in refractory metal alloys

The alloys of niobium and tantalum are attractive from a strength and compatibility viewpoint for high operating temperatures required in materials for fuel cladding, liquid metal transfer, and heat pipe applications in space power systems that will supply from 100 kWe to multi-megawatts for advanced space systems. To meet the system requirements, operating temperatures ranging from 1100 to 1600 K have been proposed. Expected lives of these space power systems are from 7 to 10 yr. A program is conducted at NASA Lewis to determine the effects of long-term, high-temperature exposure on the microstructural stability of several commercial tantalum and niobium alloys. Variables studied in the investigation include alloy composition, pre-age annealing temperature, aging time, temperature, and environment (lithium or vacuum), welding, and hydrogen doping. Alloys are investigated by means of cryogenic bend tests and tensile tests. Results show that the combination of tungsten and hafnium or zirconium found in commercial alloys such as T-111 and Cb-752 can lead to aging embrittlement and increased susceptibility to hydrogen embrittlement of ternary and more complex alloys. Modification of alloy composition helps to eliminate the embrittlement problem.

Stephens, Joseph R.↗

VLA observations of dwarf M flare stars and magnetic stars

The VLA has been used to search for 6 cm emission from 16 nearby dwarf M stars, leading to the detection of only one of them - Gliese 735. The dwarf M flare stars AD Leonis and YZ Canis Minoris were also monitored at 6 cm and 20 cm wavelength in order to study variability. Successive oppositely circularly polarized bursts were detected from AD Leo at 6 cm, suggesting the presence of magnetic fields of both magnetic polarities. An impulsive 20-cm burst from YZ CMi preceded slowly varying 6-cm emission. The VLA was also used, unsuccessfully, to search for 6-cm emission from 13 magnetic Ap stars, all of which exhibit kG magnetic fields. Although the Ap magnetic stars have strong dipolar magnetic fields, the failure to detect gyroresonant radiation suggests that these stars do not have hot, dense coronae. The quiescent microwave emission from GL 735 is probably due to nonthermal radiation, since unusually high (H = 50 kG or greater) surface magnetic fields are inferred under the assumption that the 6-cm radiation is the gyroresonant radiation of thermal electrons.

Willson, R. F.↗

Active galactic nuclei

The astrophysical processes in AGN are examined, reviewing the results of ground-based and space observations obtained in different regions of the electromagnetic spectrum. Topics addressed include blazars and blazar variability, the apparently nonthermal broadband continuum emission of blazars, simple synchrotron self-Compton models, inhomogeneous models, and the need for multiwavelength spectra of blazars. Consideration is given to nonblazar emission-line AGN, the radio/IR power law, dust emission in the IR, the NIR excess, host-galaxy starlight, 'blue bumps', the X-ray power law, the big blue bump, broadband X-ray emission, and emission lines. The great potential value of multiwavelength variability studies of AGN is stressed.

Urry, C. Megan↗

Experimental observations and finite element analysis of the initiation of fiber microbuckling in notched composite laminates

An understanding was developed of the factors that determine the semi-circular edge-notched compressive strength and the associated failure mode(s) were identified of thermoplastic composite laminates with multidirectional stacking sequences. The experimental observations and the detailed literature review suggest at least four factors that affected the determination of the strain levels at which fiber microbuckling initiates and thus, partially control the composite's compression strength. The dependent variables studied are the compressive strength of a reduced gage section compression specimen and the compression strength of a compression specimen with two semi-circular edge notches (no opposite free edges) centered along the gage section. In this research, specimens containing two semi-circular edge notches (no opposite free edges) were loaded in compression at a relatively slow rate to provide more stable development of fiber microbuckling damage. The results indicate that the local constraints (free surfaces, supporting ply orientation, and resin-rich regions) significantly affect the strain level for the initiation of in-plane fiber microbuckling. Preliminary results at an elevated temperature, 77 C, showed the shear stress yield strength of the resin was reduced and consequently, the resistance to fiber microbuckling was also reduced. The finite element analysis of the perfectly straight fiber problem indicates that the free surface effect causes a 10 percent reduction in the critical buckling strain. However, the experimentally measured reduction for fibers with an initial fiber curvature, was 35 percent.

Guynn, E. Gail↗

Investigation of x ray variability in highly active cool stars

Ginga x ray observations of highly active cool star coronae were obtained and analyzed in an effort to better understand the nature of their time variability. The possible types of variability studied included x ray occultations via eclipses in a binary system, rotational modulation of x ray emission, flares, and a search for microflaring. Observation of both sigma(sup 2) CrB and Algol were performed successfully by Ginga. The sigma(sup 2) CrB observations occurred on 27 to 30 June 1988, and the Algol observations on 12 to 14 January 1989. In the sigma(sup 2) CrB observation, simultaneous IUE and Very Large Array (VLA) observations were obtained during part of the Ginga observation. Flaring activity was detected on sigma(sup 2) CrB in the Ginga 1.7 to 11 KeV band and in the IUE microwave region. A large flare on Algol which lasted well over 12 hours was detected, began with a maximum temperature of 65 MK which gradually decayed to 36 MK, and evidence was shown of highly ionized Fe line emission.

Stern, Robert A.↗

Tribological evaluation of an Al2O3-SiO2 ceramic fiber candidate for high temperature sliding seals

A test program to determine the relative sliding durability of an alumina-silica candidate ceramic fiber for high temperature sliding seal applications as described. This work represents the first reporting of the sliding durability of this material system. Pin-on-disk tests were used to evaluate the potential seal material by sliding a tow or bundle of the candidate ceramic fiber against a superalloy test disk. Friction was measured during the tests and fiber wear, indicated by the extent of fibers broken in the tow or bundle, was measured at the end of each test. Test variables studied included ambient temperatures from 25 C to 900 C, loads from 1.3 to 21.2 Newtons, and sliding velocities from 0.025 to 0.25 m/sec. In addition, the effects of fiber diameter, elastic modulus, and a pretest fiber heat treatment on friction and wear were measured. In most cases, wear increased with temperature. Friction ranged from about 0.36 at 500 C and low velocity (0.025 m/s) to over 1.1 at 900 C and high velocity (0.25 m/s). The pretest fiber heat treatment, which caused significant durability reductions for alumina-boria-silica ceramic fibers tested previously, had little effect on the alumina-silica fibers tested here. These results indicate that the alumina-silica (Al2O3-SiO2) fiber is a good candidate material system for high temperature sliding seal applications.

Dellacorte, Christopher↗

Anisotropic line emission and the geometry of the broad-line region in active galactic nuclei

Attention is given to an escape probability-based formalism, including the interaction with a background opacity, which is used to predict line-beaming factors for broad-line region (BLR) clouds of AGN. Several computational details necessary to model gas exposed to an intense nonthermal continuum are outlined. It is found that all hydrogen lines are strongly inwardly beamed, and that C IV 1549 is moderately beamed. The implications of this for the geometry of the emission-line regions of AGN are discussed. Beaming is found to cause the source-cloud separation to be overestimated by variability studies (so that the radiation field at the BLR is even more intense than previously thought); it can even cause spherical geometries to have little instantaneous response to continuum changes.

Ferland, G. J.↗

The Colorado IUE active galaxy survey. I - Blazars

This paper presents consistently reduced UV continuum flux densities amd spectra indices derived from all 499 usable archived IUE observations of blazars made through mid-1991. The extraction of 1D spectra and the measurement of spectral parameters are discussed. A detailed error analysis is presented, including a discussion of the difference in the calibration between the IUE long- and short-wavelength cameras. The resulting data are presented in tabular and graphical form and are available by electronic mail as well. These results will be most useful for variability studies, but can also be used to characterize the broad-band energy distributions and to compare blazar properties with those of other AGN. This is the first in a series of papers, in which extracted spectral parameters will be published for the over 4500 spectra of AGN in the IUE archives.

Edelson, Rick↗