Search NASA⌕ Search

SEARCH · Search NASA

Results for “volume integral equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Measurement and modeling of methane diffusion in hydrocarbon mixtures

Methane (CH 4 ) dissolution and diffusive mass transfer in liquid hydrocarbon mixtures is of key interest in the context of enhanced oil recovery from tight shales. In this paper, we have studied CH 4 dissolution and diffusion in normal alkane mixtures at a temperature of 50 ⁰C and at pressures of ~8 MPa. For the measurement of CH 4 dissolution/diffusion in bulk liquid hydrocarbon mixtures, we have utilized a high pressure and temperature, constant-volume diffusion (CV-D) setup. Here, we have studied CH 4 diffusion in mixtures with three long-chain normal alkanes: decane (C 10 ), dodecane (C 12 ) and hexadecane (C 16 ). We have measured CH 4 solubility and diffusion in its binary mixtures with each of these three normal alkanes, as well as in ternary and quaternary mixtures. During the experiments, the swelling of the liquid mixture due to CH 4 dissolution was measured in situ via a cathetometer and was subsequently integrated into the data analysis. A key conclusion from this study is that the solubility and transport properties of the multicomponent mixtures can be predicted accurately from binary mixture measurements using an appropriate Equation of State (EOS) and Wilke’s simplification of the classical Maxwell-Stefan (MS) diffusion theory. This observation can facilitate accurate prediction of diffusive mass transfer in more complex liquid hydrocarbon mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

Measurements and Modeling of Soot Formation and Radiation in Microgravity Jet Diffusion Flames

This is a computational and experimental study for soot formation and radiative heat transfer in jet diffusion flames under normal gravity (1-g) and microgravity (0-g) conditions. Instantaneous soot volume fraction maps are measured using a full-field imaging absorption technique developed by the authors. A compact, self-contained drop rig is used for microgravity experiments in the 2.2-second drop tower facility at NASA Lewis Research Center. On modeling, we have coupled flame structure and soot formation models with detailed radiation transfer calculations. Favre-averaged boundary layer equations with a k-e-g turbulence model are used to predict the flow field, and a conserved scalar approach with an assumed Beta-pdf are used to predict gaseous species mole fraction. Scalar transport equations are used to describe soot volume fraction and number density distributions, with formation and oxidation terms modeled by one-step rate equations and thermophoretic effects included. An energy equation is included to couple flame structure and radiation analyses through iterations, neglecting turbulence-radiation interactions. The YIX solution for a finite cylindrical enclosure is used for radiative heat transfer calculations. The spectral absorption coefficient for soot aggregates is calculated from the Rayleigh solution using complex refractive index data from a Drude- Lorentz model. The exponential-wide-band model is used to calculate the spectral absorption coefficient for H20 and C02. It is shown that when compared to results from true spectral integration, the Rosseland mean absorption coefficient can provide reasonably accurate predictions for the type of flames studied. The soot formation model proposed by Moss, Syed, and Stewart seems to produce better fits to experimental data and more physically sound than the simpler model by Khan et al. Predicted soot volume fraction and temperature results agree well with published data for a normal gravity co-flow laminar flames and turbulent jet flames. Predicted soot volume fraction results also agree with our data for 1-g and 0-g laminar jet names as well as 1-g turbulent jet flames.

Ku, Jerry C.↗
DOE OSTI2021

Decay amplitudes to three hadrons from finite-volume matrix elements

We derive relations between finite-volume matrix elements and infinite-volume decay amplitudes, for processes with three spinless, degenerate and either identical or non-identical particles in the final state. This generalizes the Lellouch-Lüscher relation for two-particle decays and provides a strategy for extracting three-hadron decay amplitudes using lattice QCD. Unlike for two particles, even in the simplest approximation, one must solve integral equations to obtain the physical decay amplitude, a consequence of the nontrivial finite-state interactions. We first derive the result in a simplified theory with three identical particles, and then present the generalizations needed to study phenomenologically relevant three-pion decays. The specific processes we discuss are the CP-violating K → 3π weak decay, the isospin-breaking η → 3π QCD transition, and the electromagnetic γ* → 3π amplitudes that enter the calculation of the hadronic vacuum polarization contribution to muonic g - 2.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1985

The combined effects of stress and moisture on the structural integrity of composites

A variational approach is used to model the moisture content and distribution profiles which cause swelling in polymers and composites which are used as aircraft structural components. The moisture intrusion stems from humidity, which makes the problem one of diffusion of mass from the environment into a semiinfinite plate with a given diffusion coefficient and thickness. Lagrangian, ordinary differential equations are defined for the mass diffusion, including driving force, mass potential and volume dissipation expressions. Account is taken of the effects of stress on diffusivity, including the dilatational stress caused by inhomogeneous swelling of the material. It is noted that material near the top and bottom of a part undergoes the most swelling, and the evolution of moisture diffusion in the materials is traced. Finally, experimental data are used to define differential equations for predicting the final moisture distribution within the material.

Hiel, C.↗
NASA NTRS2017

Viscous Aerodynamic Shape Optimization with Installed Propulsion Effects

Aerodynamic shape optimization is demonstrated to tailor the under-track pressure signature of a conceptual low-boom supersonic aircraft. Primarily, the optimization reduces nearfield pressure waveforms induced by propulsion integration effects. For computational efficiency, gradient-based optimization is used and coupled to the discrete adjoint formulation of the Reynolds-averaged Navier Stokes equations. The engine outer nacelle, nozzle, and vertical tail fairing are axi-symmetrically parameterized, while the horizontal tail is shaped using a wing-based parameterization. Overall, 48 design variables are coupled to the geometry and used to deform the outer mold line. During the design process, an inequality drag constraint is enforced to avoid major compromise in aerodynamic performance. Linear elastic mesh morphing is used to deform volume grids between design iterations. The optimization is performed at Mach 1.6 cruise, assuming standard day altitude conditions at 51,707-ft. To reduce uncertainty, a coupled thermodynamic engine cycle model is employed that captures installed inlet performance effects on engine operation.

computational fluid dynamics↗
NASA NTRS1997

Some Experiences with High Order Discretization Schemes for Compressible Fluid Flow

It is widely recognized that the structure and complexity of compressible fluid flow places high demands on numerical discretization techniques for the fluid flow equations. Fluid flows arising in external aerodynamics often contain both flow field discontinuities and fluid boundary-layers. Both must be accurately resolved to provide useful information to aerodynamic design and analysis engineers. These accuracy requirements motivated the present author to examine a class of finite-volume techniques on arbitrary triangulated domains based on linear or quadratic reconstruction of integral-averaged data followed by upwind flux function evaluation and small time evolution. More recently, we have considered some new upwind techniques which yield compact discretizations while maintaining higher order accuracy. In the mini-symposium talk we will discuss both of these techniques as well as demonstrate the relative merits of each method by computing a number of aerodynamic flows containing shock waves and boundary-layers.

Barth, Timothy J.↗
NASA NTRS1984

High altitude chemically reacting gas particle mixtures. Volume 1: A theoretical analysis and development of the numerical solution

The overall contractual effort and the theory and numerical solution for the Reacting and Multi-Phase (RAMP2) computer code are described. The code can be used to model the dominant phenomena which affect the prediction of liquid and solid rocket nozzle and orbital plume flow fields. Fundamental equations for steady flow of reacting gas-particle mixtures, method of characteristics, mesh point construction, and numerical integration of the conservation equations are considered herein.

Smith, S. D.↗
NASA NTRS2023

Simulations of Zero Boiloff, Densification, and Solidification in a Large-Scale Liquid Hydrogen Tank

The current research utilizes an Energy of Fluid (EOF) approach to develop a finite volume-based Computation Fluid Dynamic (CFD) model to create a benchmark simulation of the densification of liquid hydrogen (LH2) in an experimental Integrated Refrigeration and Storage (IRAS) tank at the Kennedy Space Center (KSC). The computational code will incorporate the FLUENT pressure-based model with User Defined Functions (UDF) to implement the EOF model. The enhanced model will solve the energy equation in terms of internal energy and provide temperature and pressure calculations for a given tank geometry. Specifically, a convection term will be added to an already existing code for a more accurate simulation of LH2 densification. However, currently the research focuses on utilizing User Defined Scalars (UDS) with FLUENT to show the built-in solvers are as accurate as the written UDS. This will reduce the computational time down significantly by utilizing an already built in solver for the momentum equation. A custom UDF has been written to solve transient and steady state conduction, and results obtained using the UDF agree with results obtained using the built-in FLUENT solver. Currently, a convection UDF is being added and will be verified using known solutions for solidification and validated with the experimental results from the Cryogenics Test Laboratory (CTL) at KSC for the IRAS densification process.

Colin Philip Mahony↗
DOE OSTI2024

A High-Order Eulerian–Lagrangian Runge–Kutta Finite Volume (EL–RK–FV) Method for Scalar Nonlinear Conservation Laws

Abstract We present a class of high-order Eulerian–Lagrangian Runge–Kutta finite volume methods that can numerically solve Burgers’ equation with shock formations, which could be extended to general scalar conservation laws. Eulerian–Lagrangian (EL) and semi-Lagrangian (SL) methods have recently seen increased development and have become a staple for allowing large time-stepping sizes. Yet, maintaining relatively large time-stepping sizes post shock formation remains quite challenging. Our proposed scheme integrates the partial differential equation on a space-time region partitioned by linear approximations to the characteristics determined by the Rankine–Hugoniot jump condition. We trace the characteristics forward in time and present a merging procedure for the mesh cells to handle intersecting characteristics due to shocks. Following this partitioning, we write the equation in a time-differential form and evolve with Runge–Kutta methods in a method-of-lines fashion. High-resolution methods such as ENO and WENO-AO schemes are used for spatial reconstruction. Extension to higher dimensions is done via dimensional splitting. Numerical experiments demonstrate our scheme’s high-order accuracy and ability to sharply capture post-shock solutions with large time-stepping sizes.

Chen, Jiajie↗
NASA NTRS1989

Numerical investigation of an internal layer in turbulent flow over a curved hill

The development of an internal layer in a turbulent boundary layer flow over a curved hill is investigated numerically. The turbulence field of the boundary layer flow over the curved hill is compared with that of a turbulent flow over a symmetric airfoil (which has the same geometry as the curved hill except that the leading and trailing edge plates were removed) to study the influence of the strongly curved surface on the turbulence field. The turbulent flow equations are solved by a control-volume based finite difference method. The turbulence is described by a multiple-time-scale turbulence model supplemented with a near-wall turbulence model. Computational results for the mean flow field (pressure distributions on the walls, wall shearing stresses and mean velocity profiles), the turbulence structure (Reynolds stress and turbulent kinetic energy profiles), and the integral parameters (displacement and momentum thicknesses) compared favorably with the measured data. Computational results show that the internal layer is a strong turbulence field which is developed beneath the external boundary layer and is located very close to the wall. Development of the internal layer was more obviously observed in the Reynolds stress profiles and in the turbulent kinetic energy profiles than in the mean velocity profiles. In this regard, the internal layers is significantly different from wall-bounded simple shear layers in which the mean velocity profile characterizes the boundary layer most distinguishably. Development of such an internal layer, characterized by an intense turbulence field, is attributed to the enormous mean flow strain rate caused by the streamline curvature and the strong pressure gradient. In the turbulent flow over the curved hill, the internal layer begin to form near the forward corner of the hill, merges with the external boundary layer, and develops into a new fully turbulent boundary layer as the fluid flows in the downstream direction. For the flow over the symmetric airfoil, the boundary layer began to form from almost the same location as that of the curved hill, grew in its strength, and formed a fully turbulent boundary layer from mid-part of the airfoil and in the downstream region. Computational results also show that the detailed turbulence structure in the region very close to the wall of the curved hill is almost the same as that of the airfoil in most of the curved regions except near the leading edge. Thus the internal layer of the curved hill and the boundary layer of the airfoil were also almost the same. Development of the wall shearing stress and separation of the boundary layer at the rear end of the curved hill mostly depends on the internal layer and is only slightly influenced by the external boundary layer flow.

Kim, S-W.↗
NASA NTRS1989

Unsteady Euler airfoil solutions using unstructured dynamic meshes

Two algorithms for the solution of the time-dependent Euler equations are presented for unsteady aerodynamic analysis of oscillating airfoils. Both algorithms were developed for use on an unstructured grid made up of triangles. The first flow solver involves a Runge-Kutta time-stepping scheme with a finite-volume spatial discretization that reduces to central differencing on a rectangular mesh. The second flow solver involves a modified Euler time-integration scheme with an upwind-biased spatial discretization based on the flux-vector splitting of Van Leer. The paper presents descriptions of the Euler solvers and dynamic mesh algorithm along with results which assess the capability.

Batina, John T.↗
NASA NTRS2017

Identification of Spurious Signals from Permeable Ffowcs Williams and Hawkings Surfaces

Integral forms of the permeable surface formulation of the Ffowcs Williams and Hawkings (FW-H) equation often require an input in the form of a near field Computational Fluid Dynamics (CFD) solution to predict noise in the near or far field from various types of geometries. The FW-H equation involves three source terms; two surface terms (monopole and dipole) and a volume term (quadrupole). Many solutions to the FW-H equation, such as several of Farassat's formulations, neglect the quadrupole term. Neglecting the quadrupole term in permeable surface formulations leads to inaccuracies called spurious signals. This paper explores the concept of spurious signals, explains how they are generated by specifying the acoustic and hydrodynamic surface properties individually, and provides methods to determine their presence, regardless of whether a correction algorithm is employed. A potential approach based on the equivalent sources method (ESM) and the sensitivity of Formulation 1A (Formulation S1A) is also discussed for the removal of spurious signals.

Lopes, Leonard V.↗
NASA NTRS1982

A full potential inverse method based on a density linearization scheme for wing design

A mixed analysis inverse procedure based on the full potential equation in conservation form was developed to recontour a given base wing to produce density linearization scheme in applying the pressure boundary condition in terms of the velocity potential. The FL030 finite volume analysis code was modified to include the inverse option. The new surface shape information, associated with the modified pressure boundary condition, is calculated at a constant span station based on a mass flux integration. The inverse method is shown to recover the original shape when the analysis pressure is not altered. Inverse calculations for weakening of a strong shock system and for a laminar flow control (LFC) pressure distribution are presented. Two methods for a trailing edge closure model are proposed for further study.

Shankar, V.↗
NASA NTRS1990

An interactive adaptive remeshing algorithm for the two-dimensional Euler equations

An interactive adaptive remeshing algorithm utilizing a frontal grid generator and a variety of time integration schemes for the two-dimensional Euler equations on unstructured meshes is presented. Several device dependent interactive graphics interfaces have been developed along with a device independent DI-3000 interface which can be employed on any computer that has the supporting software including the Cray-2 supercomputers Voyager and Navier. The time integration methods available include: an explicit four stage Runge-Kutta and a fully implicit LU decomposition. A cell-centered finite volume upwind scheme utilizing Roe's approximate Riemann solver is developed. To obtain higher order accurate results a monotone linear reconstruction procedure proposed by Barth is utilized. Results for flow over a transonic circular arc and flow through a supersonic nozzle are examined.

Slack, David C.↗
DOE OSTI2021

A stochastic solver based on the residence time algorithm for crystal plasticity models

Abstract The deformation of crystalline materials by dislocation motion takes place in discrete amounts determined by the Burgers vector. Dislocations may move individually or in bundles, potentially giving rise to intermittent slip. This confers plastic deformation with a certain degree of variability that can be interpreted as being caused by stochastic fluctuations in dislocation behavior. However, crystal plasticity (CP) models are almost always formulated in a continuum sense, assuming that fluctuations average out over large material volumes and/or cancel out due to multi-slip contributions. Nevertheless, plastic fluctuations are known to be important in confined volumes at or below the micron scale, at high temperatures, and under low strain rate/stress deformation conditions. Here, we develop a stochastic solver for CP models based on the residence-time algorithm that naturally captures plastic fluctuations by sampling among the set of active slip systems in the crystal. The method solves the evolution equations of explicit CP formulations, which are recast as stochastic ordinary differential equations and integrated discretely in time. The stochastic CP model is numerically stable by design and naturally breaks the symmetry of plastic slip by sampling among the active plastic shear rates with the correct probability. This can lead to phenomena such as intermittent slip or plastic localization without adding external symmetry-breaking operations to the model. The method is applied to body-centered cubic tungsten single crystals under a variety of temperatures, loading orientations, and imposed strain rates.

42 ENGINEERING↗
DOE OSTI2020

Coupling solidification kinetics with phase-behavior computations in hydrodynamic simulations of high-pressure, dynamic-compression processes

In this study, we report a numerical scheme to integrate models for the kinetics of solidification processes together with phase-behavior computations in the context of continuum-scale hydrodynamic simulations. The objective of the phase-behavior computations is to determine the pressure and temperature, given the following three sets of inputs: (1) an appropriate equation of state to describe our system, (2) the phase fraction(s) produced by the kinetic models, (3) and the volume and internal energy obtained by solving the conservation equations that govern the hydrodynamic behavior. The kinetics are assumed to be governed by the Kolmogorov–Johnson–Mehl–Avrami equation, and the nucleation and growth rates that enter into that equation are functions of the pressure and temperature produced by the phase-behavior computations. Our formulation allows for the fluid and solid phases to be at different temperatures (thermal nonequilibrium) and pressures (arising from surface-tension-induced Laplace contributions). The formulation is presented in a fairly general setting that is independent of any particular material, although we demonstrate it in some examples related to high-energy-density science applications where materials are rapidly compressed to pressures exceeding several gigapascals in less than a microsecond. We conclude with a critical evaluation of our approach and provide suggestions for future work to improve the predictive capabilities and generality of the models.

42 ENGINEERING↗
NASA NTRS1987

Quadrupole source in prediction of the noise of rotating blades - A new source description

The aim of this paper is to perform a theoretical study of the quadrupole term of the Ffowcs Williams-Hawkings (FW-H) equation to obtain practical results for applications to rotating blades. The quadrupole term of the FW-H equation is algebraically manipulated into volume, surface and line sources using generalized function theory and differential geometry. The volume source is of the type in Lighthill's jet noise theory. The surface sources are on the blade and shock surfaces and the line source is at the trailing edge. It is shown that contribution of volume sources in the boundary layer and wakes can be written in the form of surface integrals. It is argued that the surface and line sources and the part of the volume sources in the boundary layer, wakes and vortices near the blades should be sufficient in calculation of the noise of high speed rotating blades. The integrals correspoding to the various sources appearing in the formula for calculation of the acoustic pressure are briefly derived.

Farassat, F.↗
DOE OSTI2024

Development of an implicit electromagnetic capability for a hybrid gyrokinetic ion-fluid electron model

Here we report on the development and implementation of a hybrid kinetic ion–fluid electron model for electromagnetic COGENT simulations of edge plasmas. COGENT is a finite-volume gyrokinetic code that employs a locally field-aligned coordinate system combined with a mapped multi-block grid technology to handle strongly anisotropic edge plasma turbulence. The simulation model involves the long-wavelength limit of the ion gyrokinetic equation coupled to the vorticity and Ohm's law equations for the electromagnetic field perturbations. In order to handle the fast Alfvén wave time scales, an implicit-explicit time integration approach with a physics-based preconditioner is used. The model is successfully applied to the simulations of ion-scale resistive-drift ballooning turbulence in a toroidal annulus geometry. Substantial speed-up over a fully explicit time integration approach is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗