Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A numerical investigation of the influence of heating on the excitation of high and low Mach number jet flows

The influence of heating and velocity on the unsteady nature of jet mixing layers is investigated by solving the time-dependent compressible Navier-Stokes equations using MacCormack's explicit finite difference algorithm. The computations are performed for jet Mach numbers of 0.3 and 0.8 with flow total temperatures up to 800 K. The Reynolds number ranges from 3 x 10 to the 5th to 1.3 x 10 to the 6th. Excitation is accomplished by imposing an acoustic pressure signal inside the jet duct. The objective of this effort is to compare the response of heated and unheated jets with acoustic excitation at high and low subsonic Mach numbers. The preliminary results indicate that without acoustic excitation the mixing in the heated jet is greater than in the unheated case. It has also been found that for the low speed heated jets (M = 0.3, Tt = 672K) acoustic excitation causes the production of large scale vortex structures to occur in a regular periodic manner with organized periodic pairing at some Strouhal numbers. These results are in agreement with experimental data.

Scott, J. N.↗
NASA NTRS1989

Vortex paradigm for shock-accelerated density-stratified interfaces

Numerical simulations are reported that capture the observations of Haas and Sturtevant (1985) when a planar shock accelerates an inclined planar interface between two media. A vortex paradigm is presented for interpreting the evolution of shock-accelerated density-stratified interfaces beyond early times. The simulations illustrate the paradigm and are in good agreement with the results of Haas and Sturtevant. Color images of space-time diagrams of the one-space integrated vorticity function are given to show the primary and secondary features of the emerging vortex structures.

Hawley, John F.↗
NASA NTRS1989

Goertler vortices in supersonic and hypersonic boundary layers

The problem of Goertler vortices in compressible boundary layers over concave walls is considered. At O(1) wavelengths, the instability is governed by parabolic partial differential equations that are solved numerically to determine the effect of various initial conditions on the development of Goertler vortex instability in compressible boundary layers. The results show that both the velocity and temperature fluctuations may lead to a Goertler vortex. The vortex growth rates determined from the present method are found to differ somewhat from those given by a normal mode solution. At both the supersonic and hypersonic Mach numbers, cooling has a small destabilizing effect. In addition, the most unstable disturbances shift toward lower wavelengths because of thinning of the boundary layer. The results also show that compressibility has a stabilizing effect on the Goertler instability, while the effect of an adverse pressure gradient is found to be destabilizing. The behavior of the Goertler vortex structure with Mach number is also examined. At hypersonic Mach numbers, vortices are located near the edge of the boundary layer for adiabatic wall conditions. However, the entire boundary layer is affected when the wall is cooled.

Spall, R. E.↗
NASA NTRS1990

Physical considerations governing computation of turbulent flows over bodies at large incidence

The physical aspects governing accurate numerical simulation of turbulent flows having large regions of crossflow separation are re-examined. Time-accurate, three-dimensional fine-grid Navier-Stokes solutions were obtained for turbulent subsonic and supersonic flows over a slender ogive-cylinder body of revolution at large angles of attack. These flowfields are complex and contain regions of crossflow separation and an organized leeward-side vortex structure. An algebraic eddy-viscosity turbulence model has been modified to correctly account for the effects of the vortices on the underlying viscous layers. The numerical results show that the vortical flow structure of both subsonic and supersonic high incidence flows are similar, and can be accurately treated by the turbulence model. As the angle of attack is increased, the effectiveness of the model increases since the influence of the vortices on the underlying boundary layer decreases.

Degani, David↗
NASA NTRS1990

A computational study of the impingement region of an unsteady subsonic jet

Vertical/Short Take-Off and Landing (V/STOL) aircraft may encounter operating difficulties while hovering near the ground. Lift loss, hot gas and debris ingestion, and landing surface damage are some of the potential problems which can result from the interaction of the propulsive jets with the airframe and ground. The purpose of the present work is to develop a detailed understanding of a flowfield, a jet exiting from a flat plate impacting a ground plane, that contains much of the essential physics of the complex flows encountered by V/STOL aircraft in hover. To achieve this, a high-resolution time-accurate numerical simulation of the impinging jet flow was performed. The numerical simulation is based on the solution of the laminar compressible Navier-Stokes equations using the Beam-Warming algorithm. Complex start-up and periodic jet and jet-induced vortex structures were captured, including the formation of primary and secondary jet-induced vortices and wall-jet separation. The formation and development of these phenomena are supported by experimental measurements and smoke visualization. Results are compared with appropriate experiments.

Jalamani, Zakaria A.↗
NASA NTRS1992

Response of the dipole magnetosphere to pressure pulses

The response of the magnetosphere to pressure pulses at the magnetopause has been studied using a three-dimensional model of ULF waves in a dipole geometry. Pressure pulses at the magnetosphere directly excite compressional waves, which then convert to shear mode Alfven waves due to inhomogeneity. The behavior of the system depends on the frequency of the source at the magnetopause, with vortex structure tending to form on field lines resonant with the source frequency. The perturbations between the vortices are skewed toward noon, in agreement with observations.

Lysak, Robert L.↗
NASA NTRS1992

Vorticity generation mechanisms in parallel injection schemes for supersonic mixing

A numerical study is reported of the three-dimensional nonreacting supersonic flow field produced by three parallel fuel injection schemes. Such injections are being considered as a means of enhancing fuel mixing in future Scramjet engine designs. The strength of vortex structures produced by ramp injectors and by rocket/jet interactions are quantified and their relative effectiveness in enhancing the fuel mixing process is addressed. An experimental setup for validation of the above numerical results has been constructed and preliminary results are presented. For the flow field parameters chosen, the ramp generated vorticity is found to be considerably larger than that generated by the shock. The unsteady recirculating flow field in the wake of the injector appears also to give rise to important additional vorticity and mixing.

Donohue, James M.↗
NASA NTRS1991

Flowfield analysis of modern helicopter rotors in hover by Navier-Stokes method

The viscous, three-dimensional, flowfields of UH60 and BERP rotors are calculated for lifting hover configurations using a Navier-Stokes computational fluid dynamics method with a view to understand the importance of planform effects on the airloads. In this method, the induced effects of the wake, including the interaction of tip vortices with successive blades, are captured as a part of the overall flowfield solution without prescribing any wake models. Numerical results in the form of surface pressures, hover performance parameters, surface skin friction and tip vortex patterns, and vortex wake trajectory are presented at two thrust conditions for UH60 and BERP rotors. Comparison of results for the UH60 model rotor show good agreement with experiments at moderate thrust conditions. Comparison of results with equivalent rectangular UH60 blade and BERP blade indicates that the BERP blade, with an unconventional planform, gives more thrust at the cost of more power and a reduced figure of merit. The high thrust conditions considered produce severe shock-induced flow separation for UH60 blade, while the BERP blade develops more thrust and minimal separation. The BERP blade produces a tighter tip vortex structure compared with the UH60 blade. These results and the discussion presented bring out the similarities and differences between the two rotors.

Srinivasan, G. R.↗
NASA NTRS1993

An evaluation of the real-time tropical cyclone forecast skill of the Navy Operational Global Atmospheric Prediction System in the western North Pacific

The paper evaluates the meteorological quality and operational utility of the Navy Operational Global Atmospheric Prediction System (NOGAPS) in forecasting tropical cyclones. It is shown that the model can provide useful predictions of motion and formation on a real-time basis in the western North Pacific. The meterological characteristics of the NOGAPS tropical cyclone predictions are evaluated by examining the formation of low-level cyclone systems in the tropics and vortex structure in the NOGAPS analysis and verifying 72-h forecasts. The adjusted NOGAPS track forecasts showed equitable skill to the baseline aid and the dynamical model. NOGAPS successfully predicted unusual equatorward turns for several straight-running cyclones.

Fiorino, Michael↗
NASA NTRS1992

Gallery of fluid motion

Winning photographs from the ninth Annual Fluid Mechanics Photo Contest held by the Division of Fluid Dynamics of the American Physical Society in November 1991 are displayed. Pictures are presented of vortex flows, a periodic axisymmetric vortex breakdown in a cylinder with a rotating end wall, impacting water drops, a vortex structure behind a disk started from rest, dynamic stall, blue waves, isotherms in turbulent Rayleigh-Benard convection, a square jet, 'vapor lines' emanating from water droplets, viscosity effects on the directional solidification of NH4Cl solution in a Hele-Shaw cell, and stationary cross-flow vortices.

Reed, Helen L.↗
NASA NTRS1992

A study of the rotor wake of a small-scale rotor model in forward flight using laser light sheet flow visualization with comparisons to analytical models

An experimental investigation was conducted in the 14 by 22 ft subsonic tunnel at NASA Langley Research Center to quantify the rotor wake behind a scale model helicopter rotor in forward flight (mu = 0.15 and 0.23) at one thrust level (C sub T = 0.0064). The rotor system used in the present test consisted of a four-bladed, fully articulated hub and utilized blades of rectangular planform with a NACA-0012 airfoil section. A laser light sheet, seeded with propylene glycol smoke, was used to visualize the flow in planes parallel and perpendicular to the freestream flow. Quantitative measurements of vortex location, vertical skew angle, and vortex particle void radius were obtained for vortices in the flow; convective velocities were obtained for blade tip vortices. Comparisons were made between the experimental results and the wake geometry generated by computational predictions. The results of these comparisons show that the interaction between wake vortex structures is an important consideration for correctly predicting the wake geometry.

Ghee, Terence A.↗
NASA NTRS1993

Hypersonic flow past open cavities

The hypersonic flow over a cavity is investigated. The time-dependent compressible Navier-Stokes equations, in terms of mass averaged variables, are numerically solved. An implicit algorithm, with a subiteration procedure to recover time-accuracy, is used to perform the time-accurate computations. The objective of the study is to investigate the effects of Reynolds number and cavity dimensions. The comparison of the computations with available experimental data, in terms of time mean static pressure, heat transfer, and Mach number show good agreement. In the computations large vortex structures, which adversely affect the cavity flow characteristics, are observed at the rear of the cavity. A self-sustained oscillatory motion occurs within the cavity over a range of Reynolds number and cavity dimensions. The frequency spectra of the oscillations show good agreement with a modified semi-empirical relation.

Morgenstern, Alagacyr, Jr.↗
NASA NTRS1993

Numerical simulation of a shock wave/turbulent boundary layer interaction in a duct

A numerical investigation of the interaction of an incident oblique shock wave with a turbulent duct flow is presented. The investigation consists of solving the three-dimensional, unsteady, compressible, mass averaged Navier-Stokes equations, using an implicit finite volume, lower-upper time marching code and incorporates the three-dimensional Baldwin-Lomax turbulence model. Computed results are obtained Mach number 2.9 for a turning angle of 13 degrees and Reynolds number based on duct width of 1.36 x 10 exp 7. Under various inlet conditions, the results clearly depict the flow characteristics, including the shock geometry, the separated flow region, the wall pressure distribution, and the skin friction distribution. The findings provide a physical understanding of the three-dimensional vortex structure of the flow in a duct in which a shock wave interacts with a turbulent boundary layer. The results show that the ratio of the boundary layer thickness to the duct width is the critical parameter in determining the separation structure.

Yang, Wei-Li↗
NASA NTRS1992

Concepts and application of dynamic separation for agility and super-maneuverability of aircraft: An assessment

Aims for improvement of fighter aircraft pursued by the unsteady flow community are high agility (the ability of the aircraft to make close turns in a low-speed regime) and super maneuverability (the ability of the aircraft to operate at high angles of attack in a post stall regime during quick maneuvers in a more extended speed range). High agility requires high lift coefficients at low speeds in a dynamic situation and this requirement can be met by dynamically forced separation or by quasistatic stall control. The competing methods will be assessed based on the known physics. Maneuvering into the post stall regime also involves dynamic separation but because even fast maneuvers involving the entire aircraft are 'aerodynamically slow' the resulting dynamic vortex structures should be considered 'elicited' rather than 'forced.' More work seems to be needed in this area of elicited dynamic separation.

Freymuth, Peter↗
NASA NTRS1994

Design and performance/measurement simulation studies for a ER-2 sunphotometer

Work and results, including developed software, obtained under this grant (NAG 2-620) have been reported in various progress reports, an M.S. Thesis, and software programs. The purpose of this final report is simply to provide a documented listing of what has already been reported. This includes the following: (1) Conceptual Design and Simulation of a Spectral Sunphotometer for the ER-2 Aircraft; (2) Continued Simulation and Design Studies for an ER-2 Sunphotometer; and (3) Simulation and Performance Studies of a Spectra Sunphotometer for the ER-2 Aircraft. Also, software and computational results for modeling airmass and diffuse light effects due to aerosols were provided in support of NASA ARC research on the effects of aerosols resulting from the Pinatubo volcanic eruptions. The references for these articles are as follows: (1) Post Pinatubo Optical Depth Spectra vs. Latitude and Vortex Structure; and (2) Pinatubo and Pre-Pinatubo Optical-Depth Spectra -- Mauna Loa Measurements, Comparisons, Inferred Particle Size Distributions, Radiative Effects, and Relationships to Lidar Data.

Reagan, J. A.↗
NASA NTRS1995

Tracking a turbulent spot in an immersive environment

We describe an interactive, immersive 3D system called Tracktur, which allows a viewer to track the development of a turbulent flow. Tracktur displays time-varying vortex structures extracted from a numerical flow simulation. The user navigates the space and probes the data within a windy 3D landscape. In order to sustain a constant frame rate, we enforce a fixed polygon budget on the geometry. We supplement the interactive system with interactive, hypertext documentation available on the World Wide Web. In actual use by a fluid dynamicist, the system has yielded new insights into the transition to turbulence in a laminar flow.

Banks, David C.↗
NASA NTRS1994

Hypersonic flow past open cavities

The hypersonic flow over a cavity is investigated. The time-dependent compressible Navier-Stokes equations are numerically solved. An implicit algorithm, with a subiteration procedure to recover time accuracy, is used to perform the time-accurate computations. The objective of the study is to investigate the effects of Reynolds number and cavity dimensions. The comparsion of the computations with available experimental data, in terms of time mean static pressure, heat transfer, and Mach number, show good agreement. In the computations large vortex structures, which adversely affect the cavity flow characteristics, are observed at the rear of the cavity. A self-sustained oscillatory motion occurs within the cavity over a range of Reynolds number and cavity dimensions. The frequency spectra of the oscillations show good agreement with a modified semiempirical relation.

Morgenstern, Algacyr, Jr.↗
NASA NTRS1996

Plasma Heating and Flow in an Auroral Arc

We report direct observations of the three-dimensional velocity distribution of selected topside ionospheric ion species in an auroral context between 500 and 550 km altitude. We find heating transverse to the local magnetic field in the core plasma, with significant heating of 0(+), He(+), and H(+), as well as tail heating events that occur independently of the core heating. The 0(+) velocity distribution departs from bi-Maxwellian, at one point exhibiting an apparent ring-like shape. However, these observations are shown to be aliased within the auroral arc by temporal variations that arc not well-resolved by the core plasma instrument. The dc electric field measurements reveal superthermal plasma drifts that are consistent with passage of the payload through a series of vortex structures or a larger scale circularly polarized hydromagnetic wave structure within the auroral arc. The dc electric field also shows that impulsive solitary structures, with a frequency spectrum in the ion cyclotron frequency range, occur in close correlation with the tail heating events. The drift and core heating observations lend support to the idea that core ion heating is driven at low altitudes by rapid convective motions imposed by the magnetosphere. Plasma wave emissions at ion frequencies and parallel heating of the low-energy electron plasma are observed in conjunction with this auroral form; however, the conditions are much more complex than those typically invoked in previous theoretical treatments of superthermal frictional heating. The observed ion heating within the arc clearly exceeds that expected from frictional heating for the light ion species H(+) and He(+), and the core distributions also contain hot transverse tails, indicating an anomalous transverse heat source.

Moore, T. E.↗