Search NASA⌕ Search

SEARCH · Search NASA

Results for “water dissociation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Threshold Collision-Induced Dissociation of Hydrated Thorium(IV) Trihydroxide Cation: Experimental and Theoretical Investigation of the Binding Energies for Th(OH) 3 + (H 2 O) n Complexes ( n = 1–4)

Threshold collision-induced dissociation of Th(OH) 3 + (H 2 O) n Complexes ( n = 1–4) with xenon was performed using a guided ion beam tandem mass spectrometer. The primary dissociation pathway for all complexes is a loss of a single water molecule followed by the sequential loss of additional water molecules at higher collision energies. Here, the data were analyzed using a statistical model after accounting for lifetime effects and reactant internal and kinetic energy distributions to obtain 0 K bond dissociation energies (BDEs). These were also converted using rigid rotor/harmonic oscillator approximations to yield thermodynamic values at room temperature. The 0 K BDEs of H 2 O ligands to Th(OH) 3 + (IV) are experimentally determined for the first time as 106 ± 6, 89 ± 6, 76 ± 4, and 51 ± 4 kJ/mol for the first, second, third, and fourth water ligand added. These values agree reasonably well with values calculated at the B3LYP, B3PW91, and PBE0 levels of theory with aug-cc-pVQZ basis sets, whereas B3LYP-GD3BJ, MP2, and CCSD(T) single point energies with (without) counterpoise corrections systematically overestimate the bond energies by about 15 (20), 19 (25), and (18) kJ/mol, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Giant Dipole Moments: Remarkable Effects Mono‐, Di‐, and Tri‐ Hydrated 5,6‐Diaminobenzene‐1,2,3,4‐Tetracarbonnitrile

The molecule 5,6-diaminobenzene-1,2,3,4-tetracarbonnitrile (MOI) was first synthesized by Müllen and coworkers in 2016 and boasts an ultrastrong dipole moment of $14.1\pm 0.7$ Debye in THF. Gas phase DFT computations do not fully reflect this ultrastrong dipole moment, demonstrating the role of solvent in increasing this dipole moment. Here, we investigate the effect of solvent molecule position on the dipole moment of this species, computationally examining systems with giant dipole moments. These systems are optimized in the gas phase with the B3LYP functional, employing the aug-cc-pVTZ and def2-TZVP basis sets, as well as the B3LYP-D3BJ/aug-cc-pVTZ functional in Orca. Single point DLPNO-CCSD/aug-cc-pVDZ results were obtained from Orca and Psi4, as well as DLPNO-CCSD(T)/CBS information from Psi4. Additionally, these are compared to the dipole moments of di- and tri-hydrated systems, and the SMD models for THF and water at the B3LYP/aug-cc-pVTZ level of theory. The dissociation energies, HOMO-LUMO energy gaps, and dipole moments are presented. These metrics show the nh1nh1′ THF system boasts the largest dissociation energy and dipole moment of the singly solvated systems, due to its strong hydrogen bonding. The importance of solvent placement is highlighted and may guide the synthesis of macromolecules or organic frameworks incorporating the MOI or MOI-like subunits. Remarkably, a single solvent molecule provides a good model for the difference between the gas phase and solvated species. The predicted gas phase dipole moments computed with B3LYP/aug-cc-pVTZ for the MOI, its monohydrated complex, dihydrated complex, and its trihydrated complex are 9.6, 14.2, 16.0, and 16.8 Debye, respectively.

dipole↗

Initial Characterization and Optimization of the Liquid Sampling-Atmospheric Pressure Glow Discharge Ionization Source Coupled to an Orbitrap Mass Spectrometer for the Determination of Plutonium

Plutonium measurements are essential to the nuclear forensics and safeguards community. The liquid sampling-atmospheric pressure glow discharge (LS-APGD) microplasma ionization source coupled with an Orbitrap mass spectrometer is a proven platform for uranium isotope ratio determinations. Here, this work expands the LS-APGD-Orbitrap platform capabilities by reporting the first-ever analysis of plutonium with the LS-APGD and the first-ever measurement of elemental plutonium with an Orbitrap mass spectrometer. This coupling has the potential to dramatically reduce the complex sample manipulations required for traditional analysis techniques employed for actinide isotope ratio determinations. As a first step toward the goal of simultaneous uranium and plutonium isotope ratio determinations, the initial characterization and optimization of the platform for the detection of plutonium are reported. Collision-induced dissociation modality settings were optimized to reduce water-related and other molecular clusters containing plutonium, maximizing 242 Pu 16 O 2 + responses. A design of experiments study was conducted to optimize the discharge conditions of the dual-electrode LS-APGD toward the responsivity of 242 Pu 16 O 2 +. The measurement sensitivity was determined from a Pu response curve, yielding a limit of detection of 10 fg (absolute) of total analyte when data was collected and processed with a Spectroswiss FTMS Booster X2 data acquisition system. Additionally, plutonium and uranium were measured in a simultaneous acquisition, and each analyte remained unaffected by the other. It is believed that the LS-APGD-Orbitrap platform could be a valuable addition to the nuclear forensics’ toolbox and, indeed, other scientific disciplines and regulatory communities in which rapid, high-resolution plutonium determinations are paramount.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Aqueous and Acetonitrile Bond Dissociation Free Energies of N -Hydroxyphthalimide

Widely cited values of 89 and 90.9 kcal/mol for the bond-dissociation free energy of N-hydroxyphthalimide (NHPI) in water and acetonitrile, respectively, are in error. The sources of the errors leading to these values have been explored and corrected. Here, the corrected values are confirmed through new experiments in aqueous and acetonitrile media and are found to be 84.4 ± 0.1 and 80.04 ± 0.06 kcal/mol, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Switching of electrochemical selectivity due to plasmonic field-induced dissociation

Electrochemical reactivity is known to be dictated by the structure and composition of the electrocatalyst–electrolyte interface. Here, we show that optically generated electric fields at this interface can influence electrochemical reactivity insofar as to completely switch reaction selectivity. We study an electrocatalyst composed of gold–copper alloy nanoparticles known to be active toward the reduction of CO 2 to CO. However, under the action of highly localized electric fields generated by plasmonic excitation of the gold–copper alloy nanoparticles, water splitting becomes favored at the expense of CO 2 reduction. Real-time time-dependent density functional tight binding calculations indicate that optically generated electric fields promote transient-hole-transfer-driven dissociation of the O─H bond of water preferentially over transient-electron-driven dissociation of the C─O bond of CO 2 . These results highlight the potential of optically generated electric fields for modulating pathways, switching reactivity on/off, and even directing outcomes.

Alcorn, Francis M.↗

Annihilating Actinic Photochemistry of the Pyruvate Anion by One and Two Water Molecules

Photochemical behaviors of pyruvic acid in multiple phases have been extensively studied, while those of its conjugate base, the pyruvate anion (CH 3 COCOO – , PA – ) are less understood and remain contradictory in gaseous versus aqueous phases. Here in this article, we report a joint experimental and theoretical study combining cryogenic, wavelength-resolved negative ion photoelectron spectroscopy (NIPES) and high-level quantum chemical computations to investigate PA – actinic photochemistry and its dependence on microsolvation in the gas phase. PA – ·nH 2 O (n = 0–5) clusters were generated and characterized, with their low-lying isomers identified. NIPES conducted at multiple wavelengths across the PA – actinic regime revealed the PA – photochemistry extremely sensitive to its hydration extent. While bare PA – anions exhibit active photoinduced dissociations that generate the acetyl (CH 3 CO – ), methide (CH 3 – ) anions, their corresponding radicals, and slow electrons, one single attached water molecule results in significant suppression with a subsequent second water being able to completely block all dissociation pathways, effectively annihilating all PA – photochemical reactivities. Further, the underlying dissociation mechanisms of PA – ·nH 2 O (n = 0–2) clusters are proposed involving nπ* excitation, dehydration, decarboxylation, and further CO loss. Since the photoexcited dihydrate does not have sufficient energy to overcome the full dehydration barrier before PA – could fragmentate, the PA – dissociation pathway is completely blocked, with the energy most likely released via loss of one water and internal electronic and vibrational relaxations. The insight unraveled in this work provides a much-needed critical link to connect the seemingly conflicting PA – actinic chemistry between the gas and condensed phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transition Path Sampling Study of the Feruloyl Esterase Mechanism

Serine hydrolases cleave peptide and ester bonds and are ubiquitous in nature, with applications in biotechnology, in materials, and as drug targets. The serine hydrolase two-step mechanism employs a serine–histidine–aspartate/glutamate catalytic triad, where the histidine residue acts as a base to activate poor nucleophiles (a serine residue or a water molecule) and as an acid to allow the dissociation of poor leaving groups. This mechanism has been the subject of debate regarding how histidine shuttles the proton from the nucleophile to the leaving group. To elucidate the reaction mechanism of serine hydrolases, we employ quantum mechanics/molecular mechanics-based transition path sampling to obtain the reaction coordinate using the Aspergillus niger feruloyl esterase A (AnFaeA) as a model enzyme. The optimal reaction coordinates include terms involving nucleophilic attack on the carbonyl carbon and proton transfer to, and dissociation of, the leaving group. During the reaction, the histidine residue undergoes a reorientation on the time scale of hundreds of femtoseconds that supports the “moving histidine” mechanism, thus calling into question the “ring flip” mechanism. We find a concerted mechanism, where the transition state coincides with the tetrahedral intermediate with the histidine residue pointed between the nucleophile and the leaving group. Moreover, motions of the catalytic aspartate toward the histidine occur concertedly with proton abstraction by the catalytic histidine and help stabilize the transition state, thus partially explaining how serine hydrolases enable poor nucleophiles to attack the substrate carbonyl carbon. Rate calculations indicate that the second step (deacylation) is rate-determining, with a calculated rate constant of 66 s –1 . Altogether, these results reveal the pivotal role of active-site dynamics in the catalytic mechanism of AnFaeA, which is likely similar in other serine hydrolases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Korea Institute of Energy Research (KIER) [Abstract]

KIER and NETL will collaborate to study hydrate-based technologies to enhance desalination, gas separation, and hydrocarbon flow through pipelines and wellbores. With optimized selections of hydrate formers and reactors, gas hydrates can be effective and economic mechanisms of separation for solid-water and gas mixtures, and gas hydrate formation or dissociation can be significantly delayed or expedited with suitably selected additives. Comprehensive laboratory studies, including identifying novel hydrate formers or inhibitors to control temperature and pressure requirements and understanding their working mechanism or developing reactor systems for production of large quantities of hydrates, will be performed at both KIER and NETL either parallelly or serially.

03 NATURAL GAS↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Raytheon Technologies Corporation [Abstract]

KIER and NETL will collaborate to study hydrate-based technologies to enhance desalination, gas separation, and hydrocarbon flow through pipelines and wellbores. With optimized selections of hydrate formers and reactors, gas hydrates can be effective and economic mechanisms of separation for solid-water and gas mixtures, and gas hydrate formation or dissociation can be significantly delayed or expedited with suitably selected additives. Comprehensive laboratory studies, including identifying novel hydrate formers or inhibitors to control temperature and pressure requirements and understanding their working mechanism or developing reactor systems for production of large quantities of hydrates, will be performed at both KIER and NETL either parallelly or serially.

02 PETROLEUM↗

Far-infrared spectra of CO2 clathrate hydrate frosts

As a product of our interest in remote sensing of planetary ices, frost samples of CO2 clathrate hydrate were grown by depositing water vapor on a cooled surface and pressurizing the resulting water frost with CO2 gas. At pressures above the dissociation pressure of the clathrate, the samples exhibit an absorption peak at 75 cm (sup -1). At pressures below the dissociation pressure, the peak disappears. Since the free CO2 molecule does not have rotational or vibrational absorption in this region, the absorption is attributed to a CO2 rattling mode within a clathrate cage.

Landry, J. C.↗

Perchlorate Reduction by Yeast for Mars Exploration

Martian soil contains high levels (0.6 percentage by mass) of calcium perchlorate (Ca(ClO4)2), which readily dissociates into calcium and the perchlorate ion (ClO4−) in water. Even in trace amounts, perchlorates are toxic to humans and have been implicated in thyroid dysfunction. Devising methods to lessen perchlorate contamination is crucial to minimizing the health risks associated with human exploration and colonization of Mars. We designed a perchlorate reduction pathway, which sequentially reduces perchlorate to chloride (Cl−) and oxygen (O2), for implementation in the yeast Saccharomyces cerevisiae. Using genes obtained from perchlorate reducing bacteria Azospira oryzae and Dechloromonas aromatica, we plan to assemble this pathway directly within S. cerevisiae through recombinational cloning. A perchlorate reduction pathway would enable S. cerevisiae to lower perchlorate levels and produce oxygen, which may be harvested or used directly by S. cerevisiae for aerobic growth and compound synthesis. Moreover, using perchlorate as an external electron acceptor could improve the efficiency of redox-imbalanced production pathways in yeast. Although several perchlorate reducing bacteria have been identified and utilized in water treatment systems on Earth, the widespread use of S. cerevisiae as a synthetic biology platform justifies the development of a perchlorate reducing strain for implementation on Mars.

Perchlorate↗

Structure and Reactivity of Pristine and Reduced Spinel CoFe 2 O 4 (001)/(100) Surfaces

Cobalt ferrite, CoFe 2 O 4 (CFO), nanocrystals are efficient and competitive anode materials in the field of electrochemical water splitting. Using density functional theory with on-site Hubbard U corrections (DFT+U), we have investigated the structural, electronic and magnetic properties of CFO (001)/(100) surfaces, as well as their reactivities towards water adsorption. Special attention has been focused on the formation of oxygen vacancies (V O ), due to their key role in the oxidation activity of metal oxides, often based on the Mars-van-Krevelen mechanism. Our results show that vacancy formation is easiest at oxygen sites that are not bound to tetrahedrally-coordinated Fe. Water adsorbs mainly in molecular form on the Co/Fe metal cations, whereas it dissociates at defects. In comparison to other spinels, CFO is similar to NiFe 2 O 4 , exhibiting relatively low energy cost of V O formation and a strong affinity of the vacancies towards water. Furthermore, these findings suggest that CFO may be a more promising oxidation catalyst than NiCo 2 O 4 and Co 3 O 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Grand-Canonical Simulations of Water Adsorption in Proton-Exchanged Zeolites

Water appears by design or as impurities in many important reactive systems. For those catalyzed by porous solid acids, such as widely used zeolites, experimentally quantifying the amount or elucidating the structure of adsorbed water clusters at reaction conditions is challenging, while computational studies (e.g., first-principles molecular dynamics simulations) often need to assume the loading to examine solvation effects. Furthermore, we perform first-principles grand-canonical simulations to predict water adsorption to H-ZSM-5 zeolites under specified experimental conditions. Presampling with inexpensive force fields and a pool-based parallelization algorithm are used to improve simulation efficiency, while molecular dynamics is used to sample configurations involving hydronium species. We observe that H + exchange dramatically increases the hydrophilicity of zeolite MFI and an appreciable amount of water is present at very low relative humidities. At all conditions examined, the zeolitic protons are found to dissociate readily from the surface basic sites and become mobile by participating in the hydrogen-bonded chains of adsorbed water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon dioxide hydrate and floods on Mars

Ground ice on Mars probably consists largely of carbon dioxide hydrate. This hydrate dissociates upon release of pressure at temperatures between 0 and 10 C. The heat capacity of the ground would be sufficient to produce up to 4% (by volume) of water at a rate equal to that at which it can be drained away. Catastrophic dissociation of carbon dioxide hydrate during some past epoch when the near-surface temperature was in this range would have produced chaotic terrain and flood channels.

Milton, D. J.↗

Accurate and Efficient Prediction of p K w in Aqueous Electrolytes Using Local Electrostatic Potentials

The K w =10 -pK w in aqueous electrolytes exhibit significant variations as a function of ion concentration. This behavior is not well-described by the Pitzer model, particularly at high concentrations. Here, we provide a molecular interpretation of the concentration dependent trends in p K w and develop a new method that accurately predicts the dissociation constant based upon the local electrostatic potential of the water oxygen that is determined by its nearest neighbors. The method is computationally efficient, relying only upon sampling of the local configurations (via molecular dynamics) and a small set of experimentally measured p K w . It is extensible to a range of salt compositions and the molecular understanding of the local potentials provides new routes toward the development of electrolytes with tailored physicochemical properties like p K w .

anions↗

Mechanistic Understanding of Methane Combustion over Ni/CeO 2 : A Combined Experimental and Theoretical Approach

Catalytic oxidation of methane (CH 4 ) over nonprecious Ni/CeO 2 catalysts has received a lot of attention due to the large natural gas reserves found in North America and the prohibitive cost of palladium-based catalysts, commonly used for CH 4 oxidation. However, the catalytic mechanism of CH 4 oxidation over Ni/CeO 2 still remains unclear. Moreover, the parameters affecting the reaction rates, the interaction between nickel and CeO 2 , and the reaction intermediates are still not well understood. In this study, kinetic model fitting, CH 4 temperature-programmed reduction-mass spectroscopy (CH 4 TPR-MS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) calculations were combined to elucidate the mechanism of complete oxidation of CH 4 over Ni/CeO 2 . CH 4 TPR-MS showed that the complete oxidation of CH 4 over Ni/CeO 2 requires 55–120 °C lower compared to bare CeO 2 or Ni/quartz sand; complete oxidation of CH 4 took place when the surface oxygen species were abundant, while partial oxidation products (CO, H 2 ) were formed when the oxygen species were depleted. In situ DRIFTS showed that CH 3 , CH 2 , CO, and CO 2 were formed after CH 4 activation over Ni/CeO 2 , while CH 3 O species were not observed. Combining those findings with kinetic model fitting, a redox Mars–van Krevelen (MvK) mechanism showed the best description of the experimental observations. The MvK mechanism involves the reaction of dissociated oxygen species with gas-phase CH 4 while water inhibits the reaction rate by adsorbing on the oxidized sites. Moreover, CH 4 activation leads to the reduction of the active sites and oxygen vacancy formation followed by reoxidation of the active sites by gas-phase O 2 . A CH 4 oxidation reaction pathway over Ni/CeO 2 is proposed by DFT calculations. In summary, the findings shown here suggest that CH 4 oxidation over Ni/CeO 2 follows a redox MvK mechanism and provides guidance for the rational design of non-precious-metal catalysts for CH 4 oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonequilibrium Physics of Multiphase Flow in Porous Media: Wettability and Disorder

Carbon capture and geologic storage, dissociation of methane hydrates in permafrost, enhanced oil recovery, and water dropout in low-temperature fuel cells, all have something in common: two or more fluids flow simultaneously through a porous medium; and the displacement of one fluid by another is often unstable (either due to gravity or viscous forces). Yet, our ability to model multiphase flow in porous media has remained a challenge. The traditional equations are unable to predict, explain, or even reproduce, the formation of the complex patterns observed in experiments. The overarching goal of the project is to develop new physical understanding of the role of wettability and disorder in multiphase flow through permeable media, and to develop new mathematical and computational models at the pore scale and at the continuum scale.

58 GEOSCIENCES↗