SEARCH · Search NASA

Results for “widths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Effect of slot width on transition and noise attenuation of a flat sound shield in a Mach 6 wind tunnel

An experimental and theoretical study of a sound shield concept to attenuate the noise radiated into the test section from the turbulent boundary layer on the walls of wind tunnels was conducted. The model investigated was planar with a sharp flat plate leading edge faired into an array of rods aligned nearly parallel to the local flow. For a ratio of gap diameter to rod diameter of 0.16, the flow was laminar over the entire model at a maximum local length Reynolds number of 14 million. A 45% reduction in the tunnel free stream root mean square pressure level was measured within the shielded region for this gap width when the boundary layers on the rods were laminar. Smaller ratios of gap diameter to rod diameter resulted in substantial reductions in the transition Reynolds number, and in a 40% pressure reduction.

Stainback, P. C.↗

NASA NTRS1974

High-resolution width-modulated pulse rebalance electronics for strapdown gyroscopes and accelerometers

Three different rebalance electronic loops were designed, implemented, and evaluated. The loops were width-modulated binary types using a 614.4 kHz keying signal; they were developed to accommodate the following three inertial sensors with the indicated resolution values: (1) Kearfott 2412 accelerometer - resolution = 260 micro-g/data pulse, (2) Honeywell GG334 gyroscope - resolution = 3.9 milli-arc-sec/data pulse, (3) Kearfott 2401-009 accelerometer - resolution = 144 milli-g/data pulse. Design theory, details of the design implementation, and experimental results for each loop are presented.

Kennedy, E. J.↗

NASA NTRS1975

Crack opening stretch in a plate of finite width

The problem of a uniaxially stressed plate of finite width containing a centrally located damage zone is considered. It is assumed that the flaw may be represented by a part-through crack perpendicular to the plate surface, the net ligaments in the plane of the crack and through-the-thickness narrow strips ahead of the crack ends are fully yielded, and in the yielded sections the material may carry only a constant normal traction with magnitude equal to the yield strength. The problem is solved by neglecting the bending effects and the crack opening stretches at the center and the ends of the crack are obtained. Some applications of the results are indicated by using the concepts of critical crack opening stretch and constant slope plastic instability.

Erdogan, F.↗

NASA NTRS1976

The period-pulse-width distribution of pulsars and their division into three classes

The period-pulse-width (P-W) distribution of sample of 41 pulsars has been reanalyzed under two versions of a model where radiation is beamed from magnetic polar caps which are isotropically oriented with respect to the rotation axis of the neutron stars (IOPC models). It is found that neither IOPC model can explain the P-W distribution of the entire sample. Pulsars with simple unimodal (U) or complicated multimodal (M) pulse shapes show significantly different P-W distributions. Class M pulsars have a narrower P-W distribution than do class U pulsars and, taken separately, are compatible with either IOPC model. Class U pulsars divide into two subgroups, those with relatively narrower pulses (UN) and those with relatively wider pulses (UW), each of which is compatible with either IOPC model. One interpretation of these results is that the pulsars in classes UN, M, and UW have different intrinsic beam sizes, roughly in the ratios 1:2:4, respectively. The possible origins of the three classes are discussed in terms of the force-balance magnetosphere model (Roberts et al., 1972, 1973), where the differences may be attributed to different-mass neutron stars and the structure of the polar caps. An alternative interpretation is that the angle between the rotation and emission axes is not isotropically distributed, but can take only certain preferred values.

Roberts, D. H.↗

NASA NTRS1977

Two-dimensional hygrothermal diffusions into a finite width composite laminate

Two dimensional hygroscopic diffusion into composite laminates with free edges was obtained through the use of a second order finite difference scheme. A computer program was developed for the transient nonlinear coupled hygrothermal diffusion into finite width laminates with varying surface conditions along two edges. The formulation permits the diffusion coefficient to be a function of temperature, moisture concentration, and fiber orientation. The moisture distributions thus obtained are necessary for analysis of the moisture induced interlaminar stresses in the vicinity of free edges. It is shown that large diffusion times tend to eliminate the significance of stacking sequence, but gradients within and between layers are significant for all diffusion times.

Farley, G. L.↗

NASA NTRS1977

A measurement of the width and shift of the Fe I 3719.94 A line broadened by helium

Results are reported for measurements of the widths and shifts of the overlapping helium-broadened profiles of the Fe I absorption lines at 3719.94 and 3722.56 A, which were performed in a ballistic piston compressor using a saturated solution of FeCl3 in ethanol. It is found that at 4000 K, the 3719.94-A line has a gamma/n (FWHM) value of approximately 5.2 billionths rad/sec per cu cm, the blue shift of this line corresponds to a beta/n value of about 0.49 billionth rad/sec per cu cm, and the 3722.56-A line has the same values. These results are compared with previous experimental determinations and with theoretical calculations of neutral-line broadening for the Fe I lines. The significance of these measurements with respect to the solar spectrum and cool DG white dwarfs is discussed.

Driver, R. D.↗

NASA NTRS1977

Computations of supersonic viscous flow over a finite-width plate

Finite difference methods were applied to solve the parabolic Navier-Stokes equations for the flow over a finite width plate at 0 deg and 10 deg angles of attack. The methods were developed on the basis of the operator factorization concept resulting in the split of a three dimensional equation into successive two dimensional equations. Backward and centered implicit factorization schemes, were used and their results were compared. Available numerical solutions and experimental data obtained at low Reynolds number conditions were also used for comparison. The backward implicit method provides a more successful solution, which ranges from the merged layer to the strong interaction regimes. Detailed structures were revealed of the shear layer around and behind the side edge.

Li, C. P.↗

NASA NTRS1977

A fast invariant imbedding method for multiple scattering calculations and an application to equivalent widths of CO2 lines on Venus

The invariant imbedding method considered is based on an equation which describes the change in the reflected radiation when an optically thin layer is added to the top of the atmosphere. The equation is used to treat the problem of reflection from a planetary atmosphere as an initial value problem. A fast method is discussed for the solution of the invariant imbedding equation. The speed and accuracy of the new method are illustrated by comparing it with the doubling program published by Hansen and Travis (1974). Computations are performed of the equivalent widths of carbon dioxide absorption lines in solar radiation reflected by Venus for several models of the planetary atmosphere.

Sato, M.↗

NASA NTRS1978

Width of a planetary ring system and the C-ring of Saturn

The growth of particles in a planetary ring system is considered with reference to the C-ring of Saturn. Small particles arising from various sources collide with and temporarily adhere to larger particles, and the paper presents a mathematical analysis of the conditions under which the small particles will stay long enough on the surface of the larger ones so that a permanent bond will develop. It is initially assumed that the only force acting between the particles is gravitational attraction, and upper and lower limits for the width of a planetary ring are determined. The effects of van der Waals forces are then considered.

Smoluchowski, R.↗

NASA NTRS1978

Means to achieve wide swath widths in synthetic aperture satellite borne radars

The radar range equation including processing gains for pulse compression and synthetic aperture generation was the starting point. System geometry considerations were introduced. For simplicity, flat earth geometry was used, although it was realized that this was not a good model for satellite-borne radars. Next, the constraints were introduced. These included those needed to avoid ambiguities in both range and azimuth, those needed to acheive the desired resolution, and those needed to achieve the desired swath width.

Cutrona, L. J.↗

NASA NTRS1979

Nonlinear temperature dependent failure analysis of finite width composite laminates

A quasi-three dimensional, nonlinear elastic finite element stress analysis of finite width composite laminates including curing stresses is presented. Cross-ply, angle-ply, and two quasi-isotropic graphite/epoxy laminates are studied. Curing stresses are calculated using temperature dependent elastic properties that are input as percent retention curves, and stresses due to mechanical loading in the form of an axial strain are calculated using tangent modulii obtained by Ramberg-Osgood parameters. It is shown that curing stresses and stresses due to tensile loading are significant as edge effects in all types of laminate studies. The tensor polynomial failure criterion is used to predict the initiation of failure. The mode of failure is predicted by examining individual stress contributions to the tensor polynomial.

Nagarkar, A. P.↗

NASA NTRS1980

Method of growing a ribbon crystal particularly suited for facilitating automated control of ribbon width

A method of growing a ribbon crystal is described wherein a meniscus of molten semiconductor material attached to vertical movable seed is lifted at a rate substantially equal to the rate at which the meniscus freezes. The method is characterized by the steps of continuously sensing the brightness of the growth region of the ribbon in selected areas across the ribbon width for detecting changes in the intensity of the brightness of the selected areas, and modifying the temperature of the meniscus and pulling speed in response to changes detected in the intensity for controlling the geometry of the ribbon.

Ciszek, T. F.↗

NASA NTRS1982

Weld width indicates weld strength

Width of butt weld in 2219-T87 aluminum has been found to be more reliable indicator of weld strength than more traditional parameters of power input and cooling rate. Yield stress and ultimate tensile strength tend to decrease with weld size. This conclusion supports view of many professional welders who give priority to weld geometry over welding energy or cooling rate as indicator of weld quality.

Nunes, A. C. J.↗

NASA NTRS1981

Approximate analysis of postbuckled through-width delaminations

An approximate analysis was developed to analyze the postbuckling behavior of through-width delaminations in a laminated coupon. The analysis contains two parameters which are determined using a finite element analysis. After calculating the parameters for a few configurations, the approximate analysis was used to analyze many other configurations. Lateral deflections and mode I strain-energy release rates obtained with the approximate analysis were compared with results from the finite element analysis. For the configurations analyzed, the approximate analysis agreed very well with the finite element results.

Whitcomb, J. D.↗

NASA NTRS1980

On failure modes in finite width angle ply laminates

The results of a failure analysis of finite width (+ or - theta)s T300/5208 graphite-epoxy laminates subjected to thermal curing loads and applied tensile strain are presented. Stress distributions obtained from linear elastic and linear thermoelastic finite element stress analyses are used in conjunction with the tensor polynomial failure criterion to predict the mode and location of first failure in laminates with fiber angles ranging from five to seventy-five degrees. It is shown that the mode of failure is predominantly interlaminar shear for small fiber angles, shifts to combined interlaminar normal, in-plane shear and in-plane normal for intermediate angles, and is primarily transverse tension for large fiber angles. The location of initial failure shifts from the (+ or - theta)s interface for small fiber angles to the midplane for large fiber angles.

Herakovich, C. T.↗

NASA NTRS1983

The solar O III spectrum. II - Longer wavelengths, line widths, and the He II Lyman alpha radiation field

The solar O III spectrum above 900 A is analyzed, including several visible and infrared lines which are important in nebular studies. The dependence of the line intensities on the rate of photoexcitation by He Ly-alpha is determined, and the observability of these lines in the solar spectrum is studied. The impact approximation is employed to calculate the expected line widths of the stronger solar O III lines. The photoexciting field at 304 A calculated from the observed intensities of the O III lines below 900 A (Bhatia et al., 1982) is compared with the field predicted by a recent model (Avrett et al., 1976). It is shown that additional radiation trapping must be present beyond that given by this model.

Kastner, S. O.↗

NASA NTRS1983

Effects of pulse width and coding on radar returns from clear air

In atmospheric radar studies it is desired to obtain maximum information about the atmosphere and to use efficiently the radar transmitter and processing hardware. Large pulse widths are used to increase the signal to noise ratio since clear air returns are generally weak and maximum height coverage is desired. Yet since good height resolution is equally important, pulse compression techniques such as phase coding are employed to optimize the average power of the transmitter. Considerations in implementing a coding scheme and subsequent effects of an impinging pulse on the atmosphere are investigated.

Cornish, C. R.↗

NASA NTRS1984

Analysis of instability-related growth of a through-width delamination

The effect of various parameters on instability related delamination growth was studied. The configuration studied consisted of a thick composite laminate with a single through width delamination located near one surface. Both mechanical and thermal loads were considered. It is assumed that GI and GII govern delamination growth. An approximate superposition stress analysis was developed which gives closed form expressions for GI and GII. It is found that both GI and GII are very sensitive to delamination length and location through the thickness and that the magnitude of GI is also sensitive to initial imperfection. Critical loads for delamination growth are calculated based on three growth criteria. Large differences in the predictions highlight the need for a verified mixed mode delamination growth criterion.

Whitcomb, J. D.↗