SEARCH · Search NASA

Results for “zero modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Computationally efficient evaluation of optimum homogeneous charge compression ignition operating range with accelerated multizone engine cycle simulation

The very intensive calculations necessary to define a performance map requiring evaluation of over a hundred individual operating points can be efficiently conducted with accelerated multizone for engine cycle simulation, leading to a definition of regions of acceptable and optimum homogeneous charge compression ignition operation. Accelerated multizone for engine cycle simulation has the virtue of enabling accurate evaluation of many operating conditions based on thermal stratification data from a single fluid mechanics run at motored conditions. This is possible because thermal stratification is more sensitive to engine geometry than to operating conditions. In this article, accuracy of accelerated multizone for engine cycle simulation is demonstrated by comparison with experimental data for iso-octane homogeneous charge compression ignition operation over a broad range of lean equivalence ratios (0.14–0.28). The validated accelerated multizone for engine cycle simulation model is then applied to generating a performance map for an engine controlled by appropriately adjusting equivalence ratio and internal exhaust gas recirculation. Regions of acceptable and optimum combustion are identified. It is finally demonstrated that while indicated mean effective pressure remains low for optimum homogeneous charge compression ignition operation (1–4 bar), this is sufficient for a large fraction of typical driving in light-duty vehicles. Much driving including idle can therefore be done in homogeneous charge compression ignition mode at high efficiency and low (essentially zero) NOx and particulate matter emissions.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2020

Dynamically Reconfigurable Data Readout of Pixel Detectors for Automatic Synchronization with Data Acquisition Systems

Reconfigurable detectors with dynamically selectable sensing and readout modes are highly desirable for implementing edge computing as well as enabling advanced imaging techniques such as foveation. The concept of a camera system capable of simultaneous passive imaging and dynamic ranging in different regions of the detector is presented. Such an adaptive-autonomous detector with both spatial and temporal control requires programmable window of exposure (time frames), ability to switch between readout modes such as full-frame imaging and zero-suppressed data, modification of the number of pixel data bits and independent programmability for distinct detector regions. In this work, a method is presented for seamlessly changing time frames and readout modes without data corruption while still ensuring that the data acquisition system (DAQ) does not need to stop and resynchronize at each change of setting, thus avoiding significant dead time. Data throughput is maximized by using a minimum unique data format, rather than lengthy frame headers, to differentiate between consecutive frames. A data control and transmitter (DCT) synchronizes data transfer from the pixel to the periphery, reconfigures the data to transmit it serially off-chip, while providing optimized decision support based on a DAQ definable mode. Measurements on a test structure demonstrate that the DCT can operate at 1 GHz in a 65 nm LP CMOS process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Normal modes in thermal AdS via the Selberg zeta function

The heat kernel and quasinormal mode methods of computing 1-loop partition functions of spin s s fields on hyperbolic quotient spacetimes \mathbb{H}^{3}/\mathbb{Z} ℍ 3 / ℤ are related via the Selberg zeta function. We extend that analysis to thermal \text{AdS}_{2n+1} AdS 2 n + 1 backgrounds, with quotient structure \mathbb{H}^{2n+1}/\mathbb{Z} ℍ 2 n + 1 / ℤ . Specifically, we demonstrate the zeros of the Selberg function encode the normal mode frequencies of spin fields upon removal of non-square-integrable modes. With this information we construct the 1-loop partition functions for symmetric transverse traceless tensors in terms of the Selberg zeta function and find exact agreement with the heat kernel method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Low mode implosion symmetry sensitivity in low gas-fill NIF cylindrical hohlraums

Achieving an efficient capsule implosion in National Ignition Facility indirect-drive target experiments requires symmetric hohlraum x-ray drive for the duration of the laser pulse. This is commonly achieved using two-sided two-cone laser irradiation of cylindrical hohlraums that, in principle, can zero the time average of all spherical harmonic asymmetry modes <6 as well as the time dependence of the usually dominant mode 2. In practice, experimental evidence indicates that maintaining symmetric drive becomes limited late in the pulse due to the inward expansion of the hohlraum wall and outward expansion of the capsule ablator plasmas impairing the propagation of the inner-cone laser beams. This effect is enhanced in hohlraums employing low gas-fill, now used almost exclusively as these provide the highest performing implosions and reduce Stimulated Brillouin and Raman backscatter losses, since the gas plasma provides less back pressure to limit blow-in of the hohlraum wall and capsule ablator plasmas. In order to understand this dynamic behavior, we combined multi-keV X-ray imaging of the wall and imploded fuel plasmas as we changed a single parameter at a time: hohlraum gas-fill, laser outer cone picket energy, radius of high density carbon capsules used, and laser beam polar and azimuthal pointing geometry. In this work, we developed a physics-based multi-parameter experimental scaling to explain the results that extend prior scalings and compare those to radiation hydrodynamic simulations to develop a more complete picture of how hohlraum, capsule, and laser parameters affect pole vs equator drive symmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Noncommutative field theory of the Tkachenko mode: Symmetries and decay rate

We construct an effective field theory describing the collective Tkachenko oscillation mode of a vortex lattice in a two-dimensional rotating Bose-Einstein condensate in the long-wavelength regime. The theory has the form of a noncommutative field theory of a Nambu-Goldstone boson, which exhibits a noncommutative version of dipole symmetry. From the effective field theory, we show that, at zero temperature, the decay width Γ of the Tkachenko mode scales with its energy E as Γ ∼ E 3 in the low-energy limit. We also discuss the width of the Tkachenko mode at a small temperature. Published by the American Physical Society 2024

Du, Yi-Hsien (ORCID:000000021670899X)↗

DOE OSTI2020

Four-phase interleaved TCM DC-DC buck converter with matrix inductor in battery charging application

In this paper, a 1-kW DC-DC buck converter with a four-phase interleaved matrix inductor is proposed for battery charging applications. It is well-known that the DC bias on the inductor will cause high core loss as it changes the B–H characteristic. Typically, the transient conduction mode employed in high voltage applications for zero-voltageswitching of devices would cause higher inductor current ripple. The conventional approach to reduce the effect of DC bias and inductor current ripple is employing multi-phases. However, the cost and size of the converter will increase significantly. This paper proposes the matrix inductor which has a small volume and reduces the effect of the DC bias by flux sharing and flux cancellation at the same time, results in low inductor core loss. With the interleaved operations the output current ripple can be lower which is suitable for battery charging application. Besides, the comparison of the synchronous and interleaved operation is presented. A 1-kW prototype is built and the experimental results show that the peak efficiency is 99.1% and 99.2% for synchronous and interleaved control, respectively. Additionally, the output current ripple of the interleaved operation is reduced by 85% in comparison with the synchronous operation.

14 SOLAR ENERGY↗

DOE OSTI2021

Dynamically Tunable Terahertz Emission Enabled by Anomalous Optical Phonon Responses in Lead Telluride

Lead telluride (PbTe), a narrow bandgap semiconductor commonly used in infrared detectors, exhibits anomalous vibrational and structural properties, making it appealing for thermoelectrics. Despite significant fundamental interest in the microscopic origins of its unusual vibrational properties, the optical functionalities stemming from phonons and electron–phonon coupling in PbTe have not been closely investigated. This work reports measurements of terahertz (THz) radiation from a PbTe single crystal following ultrafast optical excitation and investigates IR-active phonon responses as a function of excitation fluence and temperature. We uncover a spectrally tunable THz emission peak enabled by an epsilon-near-zero response of the coupled plasmon–longitudinal optical phonon mode that can be dynamically shifted via tuning photocarrier density. Spectral tunability (Δω/ω = 25%) is significant and beyond what has been achieved by any other THz emitter. In addition, the emitted THz fields reveal signatures of a zone center transverse optical phonon anomaly and unveil a new mode at 0.3 THz that diminishes in amplitude under increasing photocarrier density. Temperature-dependent measurements suggest that the transverse-like modes at 1 and 1.5 THz are possibly of different origins. These results indicate that the unusual phononic properties in PbTe are tunable via photoexcitation and enable new optical functionalities in THz applications, such as spectrally tunable emitters and all-optical modulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Extraction and selective promotion of zero-group velocity and cutoff frequency resonances in bi-dimensional waveguides using the electromechanical impedance method

This study showcases the electromechanical impedance (EMI) technique for extracting and promoting zero-group velocity (ZGV) and cutoff frequency resonances in a waveguide structure. Here, we identify the mechanisms of multiple resonances in the EMI spectra via a wave propagation perspective. Both simulation and experiments reveal the fact that sharp resonances in the conductance spectra are associated with either ZGV or cutoff frequency points. Consequently, we design four test configurations to enhance local resonances by aligning induced motions with considered mode shapes. Reasonable agreement between simulation and experiment results is observed. We evaluate the performance of considered configurations in terms of mode enhancement, and configurations that can selectively promote certain mode families are summarized. This study also shines the light on the EMI technique for quantitative non-destructive evaluation (NDE) by potentially supporting the inverse characterization of mechanical properties of host structures.

42 ENGINEERING↗

DOE OSTI2020

Horizon constraints on holographic Green’s functions

We explore a new class of general properties of thermal holographic Green’s functions that can be deduced from the near-horizon behaviour of classical perturbations in asymptotically anti-de Sitter spacetimes. We show that at negative imaginary Matsubara frequencies and appropriate complex values of the wavenumber the retarded Green’s functions of generic operators are not uniquely defined, due to the lack of a unique ingoing solution for the bulk perturbations. From a boundary perspective these ‘pole-skipping’ points correspond to locations in the complex frequency and momentum planes at which a line of poles of the retarded Green’s function intersects with a line of zeroes. As a consequence the dispersion relations of collective modes in the boundary theory at energy scales ω ~ T are directly constrained by the bulk dynamics near the black-brane horizon. For the case of conserved U(1) current and energy-momentum tensor operators we give examples where the dispersion relations of hydrodynamic modes pass through a succession of poleskipping points as real wavenumber is increased. We discuss implications of our results for transport, hydrodynamics and quantum chaos in holographic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Scintillator-based Timepix3 detector for neutron spin-echo techniques using intensity modulation

A scintillator-based Timepix3 (TPX3) detector was developed to resolve the high-frequency modulation of a neutron beam in both spatial and temporal domains, as required for neutron spin-echo experiments. In this system, light from a scintillator is manipulated with an optical lens and is intensified using an image intensifier, making it detectable with the TPX3 chip. Two different scintillators, namely, 6 LiF:ZnS(Ag) and 6 LiI:Eu, were investigated to achieve the high resolution needed for spin-echo modulated small-angle neutron scattering (SEMSANS) and modulation of intensity with zero effort (MIEZE). The methodology for conducting event-mode analysis is described, including the optimization of clustering parameters for both scintillators. The detector with both scintillators was characterized with respect to detection efficiency, spatial resolution, count rate, uniformity, and γ-sensitivity. The 6 LiF:ZnS(Ag) scintillator-based detector achieved a spatial resolution of 200 μm and a count rate capability of 1.1 × 10 5 cps, while the 6 LiI:Eu scintillator-based detector demonstrated a spatial resolution of 250 μm and a count rate capability exceeding 2.9 × 10 5 cps. Furthermore, high-frequency intensity modulations in both spatial and temporal domains were successfully observed, confirming the suitability of this detector for SEMSANS and MIEZE techniques, respectively.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Electrochemical Degradation Modes in Bifacial Silicon Photovoltaic Modules

Motivated by the rapidly rising deployment of bifacial monocrystalline-silicon photovoltaics (PV), we investigate the durability of various PV module packaging configurations with transparent coverings on both the front and rear sides of the module. We use a series of bifacial passivated emitter and rear cell (p-PERC) mini-modules with systematically varying outer cover materials (glass/glass, G/G, or glass/transparent backsheet, G/TB) and encapsulant chemistries (poly [ethylene-co-vinyl acetate], EVA; or polyolefin, POE). We study degradation modes over 1,000 hours of combined damp heat (DH) exposure and high system voltages that can cause potential-induced degradation (PID) under positive, zero, or negative 1,000 V cell-to-frame bias. We analyze the degradation modes using a combination of current-voltage measurements, impedance spectroscopy, external quantum efficiency, and spatially resolved luminescence and thermal imaging. Our results highlight various types of degradation including shunting, enhanced recombination, and series resistance increases, and we use spatially resolved characterization to separately identify the localized effects. We show that multiple PID and moisture-ingress degradation modes severely affect EVA-containing modules, with previously reported PID processes under negative-bias DH and a unique observation of rear-side surface recombination in G/EVA/G modules under positive-bias DH. We observe significantly less degradation in POE-containing modules, where the G/POE/G configuration exhibits minimal degradation under all stress conditions that we employ.

14 SOLAR ENERGY↗

DOE OSTI2024

Integrated protonic ceramic electrochemical cell for sustainable energy economy using water-energy nexus framework

Reliance on fossil fuels will continue for the next decades even though there are global pushes away from it to mitigate the overarching climate challenge, most especially by its highest consumers and availability. While there is a hastening global shift away from fossil fuel, integrating its assets into this technology helps limit the risk and future losses of stranded assets and reduce the cost of investment in the new technologies. Moreover, the generation of electricity from intermittent renewable sources like solar and wind has witnessed a significant surge in recent years, leading to a pressing demand for practical energy storage systems. Electrical energy storage is anticipated to play a pivotal role in the future global energy system, facilitating load-leveling operations to support the greater integration of renewable and distributed generation. Reversible electrochemical cells (RECs) offer a promising option for addressing the fossil fuel assets integration and energy storage challenges through the interconversion between electrical and chemical energy and concurrent utilizing carbon emission. In their electrolysis mode, the RECs convert electricity into durable, storable, and portable valuable chemical fuels such as syngas and methane. Conversely, the produced chemical fuels can be used as reactants in the fuel cell mode to generate electricity on demand with minimal (hydrocarbons) or zero when H2 or NH3 is used emissions. However, a challenging goal for this type of technology remains to achieve optimal operation and high roundtrip efficiencies, which has hindered the deployment of previous electrochemical cells. This dissertation demonstrates how reversible protonic ceramic electrochemical cells (RePCECs) can be integrated with fossil fuel power plants and renewable energy sources as a potential energy storage system. In this work, integrated RePCEC systems are designed and examined using computational modeling at scales to determine appropriate system configurations and operating conditions that achieve high roundtrip efficiencies. Cell level design of the PCEC is the first approach, several cells are assembled for the stack level model that is integrated into combined cycle powerplant and solar photovoltaic for the system level model. After critical literature review, this answered the operational and integration research questions proposed to address these challenges. The designed systems perform two functions, utilizing captured CO2 and storing renewable energy through co-electrolysis of steam and CO2. The co-electrolysis reaction involves endothermic water electrolysis and exothermic methanation reaction. To enhance high roundtrip efficiency, there is a need for thermal balance and management in the electrolysis mode. This involves operating the RePCEC stack under conditions that favor methane production to balance out heat needed by water electrolysis, it crucial for the RePCEC system operation. Methanation is enhanced by low temperatures. Leveraging on fabricated BCZYYb-electrolyte RePCEC, the cell model designed revealed that the optimum temperature for methane production is 450℃ at atmospheric pressure. Thus, to achieve optimum system performance, operating in the temperature range 450-525℃ is recommended at the given configuration, combining between the optimum temperature for methane production and temperature for the optimum stack roundtrip efficiency. Configuration with carbon capture system and purge stream is the optimum configuration from the seven conceptualized and evaluated. The modeling outcomes include a thermodynamic examination of integrated RePCEC systems, calibration of cell and stack level models, and steady-state simulation and integration into a 600MW combined cycle power plant retrofitted with two two-stage membrane-based carbon capture system and a wastewater treatment and recovery unit. At 100% powerplant loading, the stack and system roundtrip efficiencies are 72% and 51.37% respectively. Adding a purge stream for produced hydrogen at the system downstream improves the efficiencies to 74 and 55.48% respectively. At atmospheric pressure and 525℃, the system model suggests that a stack roundtrip of 82% is achievable, and overall system efficiency increases by reducing the energy consumption by the balance of plant components for steam generation and storage. Economic analysis of the process gives levelized cost of methane as $2.24/MMBtu lower than the conventional production route that range between $3.46/MMBtu and $9.85/MMBtu. The lifecycle analysis shows that the global warming potential for the production of methane and hydrogen from the RePCEC system is 3.83 kg CO2 eq which is lower than 9.35 kg CO2 eq emission during steam methane reforming for hydrogen production. This answered both the environmental and economic concerns in the raised research question. The proposed RePCEC configuration and analysis carried out in this dissertation to address the surge in renewable energy and challenges with PCEC technology hold significant potential in achieving large-scale energy storage while simultaneously reducing carbon emissions. These advancements, coupled with suitable governmental policies and incentive programs, have the potential to economically disrupt the natural gas industries by using RePCEC systems for methane production, thereby making them more favorable for eventual implementation and commercialization.

25 ENERGY STORAGE↗

DOE OSTI2025

Emergent hydrodynamic mode on SU(2) plaquette chains and quantum simulation

We search for emergent hydrodynamic modes in real-time Hamiltonian dynamics of 2+1-dimensional SU(2) lattice gauge theory on a quasi-one-dimensional plaquette chain, by numerically computing symmetric correlation functions of energy densities on lattice sizes of about 20 with the local Hilbert space truncated at 𝑗 max = $\frac{1}{2}$. Because of the Umklapp processes, we only find a mode for energy diffusion. The symmetric correlator exhibits transport peak near zero frequency with a width approximately proportional to momentum squared at small momentum, when the system is fully quantum ergodic, as indicated by the eigenenergy level statistics. This transport peak leads to a power-law 𝑡 −$\frac{1}{2}$ decay of the symmetric correlator at late time, also known as the long-time tail, as well as diffusionlike spreading in position space. We also introduce a quantum algorithm for computing the symmetric correlator on a quantum computer and find it gives results consistent with exact diagonalization when tested on the IBM emulator. Finally we discuss the future prospect of searching for the sound modes.

Hamiltonian systems↗

DOE OSTI2021

Inhomogeneous mean-field approach to collective excitations near the superfluid–Mott glass transition

Highlights: • Unconventional collective excitations across the superfluid–Mott glass transition. • Higgs mode localized in superfluid and insulating phases. • Broad uncritical amplitude response function at quantum phase transition. • Goldstone mode delocalizes in the superfluid phase. We develop an inhomogeneous quantum mean-field approach to the behavior of collective excitations across the superfluid–Mott glass quantum phase transition in two dimensions, complementing recent quantum Monte Carlo simulations (Puschmann et al. 2020). In quadratic (Gaussian) approximation, the Goldstone (phase) and Higgs (amplitude) modes completely decouple. Each is described by a disordered Bogoliubov Hamiltonian which can be solved by an inhomogeneous multi-mode Bogoliubov transformation. We find that the Higgs mode is spatially localized in both phases. The corresponding scalar spectral function shows a broad peak that is noncritical in the sense that its peak frequency does not soften but remains nonzero across the quantum phase transition. In contrast, the lowest-energy Goldstone mode delocalizes in the superfluid phase, leading to a zero-frequency spectral peak. We compare these findings to the results of the quantum Monte Carlo simulations. We also relate them to general results on the localization of bosonic excitations, and we discuss the limits and generality of our approach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Explainable tokamak-agnostic forecasting of fusion plasma instability via megahertz turbulent fluctuations

Scientific applications of artificial intelligence (AI) often remain limited by device-specific training and unexplained “black-box” approaches, creating fundamental barriers to cross-system generalization. This challenge is critical for nuclear fusion, where future reactors will have limited operational data for AI training. Here, we demonstrate that our neural network, trained solely on megahertz-scale turbulence measurements from one machine (DIII-D), forecasts Type-I edge localized mode (ELM) onsets in a different tokamak (KSTAR) through zero-shot weight transfer following physics-consistent preprocessing without device-specific retraining. Through an explainable AI framework combining gradient-weighted class activation mapping with physics validation, we reveal that our network can internalize physics relationships governing the ELM instabilities rather than memorizing device-specific patterns. The network perceives spatiotemporal features that correlate consistently with independently calculated instability growth rates, magnetohydrodynamic stability limits, and pedestal structure dynamics. Statistical analyses of dimensionally-reduced saliency features reveal the identical triangular features between the saliency representations, instability growth rates, and prediction probability across tokamaks, providing evidence that our forecasting system can show tokamak-agnostic generalization. This work contributes to a foundation for explainable scientific AI systems, where cross-system developments are essential for transcending traditional domain-specific constraints.

AI↗

DOE OSTI2021

Bond-Peierls polaron: Moderate mass enhancement and current-carrying ground state

We study polarons in the one-dimensional Bond-Peierls electron-phonon model in which phonons on bonds of a lattice modulate the hopping of electrons between lattice sites and contrast the results to those known for the breathing-mode Peierls problem. By inspecting the atomic limit, we show that polaronic dressing and mass enhancement of Bond-Peierls polarons depend on the momentum dependence of the phonons. For dispersionless phonons, Bond-Peierls polarons are perfectly localized in the atomic limit, unlike their breathing-mode counter-parts because the carrier creates a string of phonon excitations that can only be annihilated via processes that retrace the carrier to its original site. Furthermore, inclusion of phonon dispersion leads to a nondivergent polaron mass even in the atomic limit and depending on the form of the phonon dispersion may lead to a transition to a non-zero-momentum ground state akin to that found in the breathing-mode Peierls model.

1-dimensional systems↗

DOE OSTI2022

Entanglement and seniority

In quantum mechanics entanglement is the most striking phenomenon which has no counterpart in classical systems. Although, different approaches have already been developed to study correlations in the case of indistinguishable particles, the exploration of the so-called mode entanglement is still in its initial stage in nuclear physics. Study of mode-entanglement in the seniority model, derivation of analytic formulas for the one-body reduced density matrix of states with seniority $ν$ = 0, 1, 2, and $ν$ = 3, and also determination of the particle number dependence of the one-body reduced density matrix for arbitrary seniority. In addition, comparison of the predictions of the seniority model with the results of the shell model to gain insight into the structure and correlations of the ground and lowest yrast states. In the seniority model the analytic results are calculated using the quasi-spin formalism. The numerical shell model calculations are carried out in the standard shell model framework using an inert core. The applied realistic effective interactions are derived earlier using the $G$-matrix formalism. The density matrix renormalization group method is also applied in order to directly calculate the mode entropies. In the seniority model simple analytical expressions are given for the mode entropies. The peculiar behavior of the half-filled shells and the seniority-zero states are revealed. Numerical results are presented for the lightest stable calcium isotopes and for 94 Ru nucleus. For 94 Ru, the seniority model accounts for the 0$g$ 9/2 mode entropies, but seniority mixing is important for certain yrast states. Furthermore, interaction induced quantum fluctuations decrease the occupation of the 0$f$ 5/2 , 1$p$ 3/2 and 1$p$ 1/2 shells, and amount in non-negligible mode entropies on these shells, too, clearly outside the scope of the simple (0$g$ 9/2 ) 4 seniority model. The 0$f$ 7/2 shell-based seniority model is more accurate for the Ca isotopes, but seniority mixing is substantial for some 44 Ca yrast states, too. Mode and one-body entanglement entropies are useful tools to investigate the structure of quantum correlations in nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

How fluctuation intensity flux drives SOL expansion

Abstract Predictions of heat load widths λ q based on particle orbits alone are very pessimistic. This paper shows that pedestal peeling-ballooning (P-B) magnetohydrodynamic (MHD) turbulence broadens the stable scrape-off layer (SOL) by the transport, or spreading, of fluctuation energy from the pedestal. λ q is seen to increase with Γ ε , the fluctuation energy density flux. We elucidate the fundamental physics of the spreading process. Γ ε increases with pressure fluctuation correlation length. P-B turbulence is seen to be especially effective at spreading, on account of its large effective mixing length. Spreading is shown to be a multiscale process, which is enhanced by the synergy of large and small-scale modes. Pressure fluctuation skewness correlates well with the spreading flux–with the zero crossing of skewness and Γ ε spatially coincident–suggesting the role of coherent fluctuation structures and the presence of intermittency in λ q broadening. λ q ∼ B p − 1 scaling persists for the broadened SOL. We show that the spreading flux increases for increasing pedestal pressure gradient ∇ P 0 and for decreasing pedestal collisionality υ ped ∗ . This trend is due to the dominance of peeling modes for large ∇ P 0 and low υ ped ∗ . Ultimately, we see that a state of weak MHD turbulence, as for small ELMs, is very attractive for heat load management. Our findings have transformative implications for future fusion reactor designs and call for experimental investigations to validate the observed trends.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗