Search NASA⌕ Search

SEARCH · Search NASA

Results for “100%”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sound speed measurements in shock-compressed cemented Tungsten carbides at pressures up to 100 GPa

To gain insights into thermodynamic states attained during shock compression of cemented tungsten carbide with 3.7 wt.% cobalt binder, we present results of longitudinal sound (release wave) speed measurements and their analysis at peak stresses up to 100 GPa (volumetric compression ratio ~ 15%). The sound speeds are determined using front-surface impact and release-wave overtake plate impact experimental configurations using laser interferometry. The measured sound speed data along with estimates for bulk sound speeds obtained using the fourth-order Birch-Murnaghan EoS and thermodynamics are used to determine the longitudinal moduli and shear moduli of shocked tungsten carbide at the various peak compression states attained in the experiments. Here, the longitudinal sound speeds were found to increase linearly with volume compression ratio from 6.97 ± 0.010 km/s at ambient conditions to 8.26 ± 0.156 km/s at a volume compression ratio of ~ 15%. The corresponding longitudinal elastic moduli also increase nearly linearly with the volume compression ratio but remain consistently lower than their theoretical predictions based on continuum models with no damage. Also, the sensitivity of shear moduli to pressure, as predicted by the Steinberg-Guinan model, is reduced substantially and the shear moduli of cemented WC with 3.7 wt.% Co remains nearly constant at ~ 310 GPa at the various peak compression stress states investigated in the present study.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Accuracy of XAS theory for unraveling structural changes of adsorbates: CO on Ni(100)

Studying surface reactions using ultrafast optical pump and X-ray probe experiments relies on accurate calculations of X-ray spectra of adsorbates for correct identification of the spectral signatures and their dynamical evolution. We show that experimental XAS can be well reproduced for the different binding sites in a static prototype system CO/Ni(100) at a standard DFT (GGA) level of theory, using a plane-wave basis and pseudopotentials. This validates its utility in analyzing ultrafast X-ray probe experiments. The accuracy of computed relative core level binding energies is about 0.2 eV, representing a lower limit for which spectral features can be resolved with this method. We also show that the commonly used Z +1 approximation gives very good core binding energy shifts overall. However, we find a discrepancy for CO adsorbed in the hollow site, which we assign to the significantly stronger hybridization in hollow bonding than in on-top.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Simultaneous thickness and thermal conductivity measurements of thinned silicon from 100 nm to 17 μm

Studies of size effects on thermal conductivity typically necessitate the fabrication of a comprehensive film thickness series. In this Letter, we demonstrate how material fabricated in a wedged geometry can enable similar, yet higher-throughput measurements to accelerate experimental analysis. Frequency domain thermoreflectance (FDTR) is used to simultaneously determine the thermal conductivity and thickness of a wedged silicon film for thicknesses between 100 nm and 17 μm by considering these features as fitting parameters in a thermal model. FDTR-deduced thicknesses are compared to values obtained from cross-sectional scanning electron microscopy, and corresponding thermal conductivity measurements are compared against several thickness-dependent analytical models based upon solutions to the Boltzmann transport equation. Our results demonstrate how the insight gained from a series of thin films can be obtained via fabrication of a single sample.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Micro-strains, local stresses, and coherently diffracting domain size in shock compressed Al(100) single crystals

In situ x-ray diffraction (XRD) measurements and their analysis in Al single crystals shock compressed along the [100]-direction were utilized to examine shock wave induced microstructural heterogeneities. High-resolution XRD line profiles for the 200, 400, and 600 Al peaks were measured in uniaxial strain compression states to either 5.6 or 11.7 GPa and partial stress release to 3.5 or 6.6 GPa, respectively. Broadening of the XRD line profiles was analyzed to determine the magnitude of the longitudinal micro-strain distribution (0.195% and 0.28% full width at half maximum for 3.5 and 6.6 GPa stresses, respectively) and the size of coherently diffracting domains (CDDs) (0.125 and 0.07 μm for 3.5 and 6.6 GPa stresses, respectively). From the longitudinal micro-strain distributions, the distribution of local stress differences (or stress deviators) was obtained in the shocked state. The full width at half maximum of this distribution, a measure of the local stress inhomogeneities, is greater than half of the macroscopic stress difference for both 3.5 and 6.6 GPa peak stresses, suggesting considerable variation in local stress deviators. The CDD sizes determined here are comparable to characteristic length scales for defect-free regions determined from defect density measurements in post-shock recovery experiments. As a result, the present work represents an important step in understanding material microstructure and inhomogeneities in the shock-compressed state.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A near-field study of VO2/(100)TiO2 film and its crack-induced strain relief

Temperature-induced metal–insulator transition (MIT) in vanadium dioxide (VO2) has been under intense research interest for decades both theoretically and experimentally. Due to the complex nature of electron correlations, the underlying physics behind the MIT in VO2 has yet to be fully grasped. In this work, we utilize the fine resolution of the scattering-type scanning near-field optical microscope to investigate the MIT in an epitaxial VO2 thin film on the (100)R TiO2 substrate with mid-infrared light. Bidirectional tweed-like metal–insulator phase coexistence patterns are observed and understood under the Landau free energy paradigm. More interestingly, delayed metallic nucleation is observed near the surface cracks due to local strain relief. This research proposes ideas in investigating the temperature–pressure phase diagram and tuning the interplay between local strain and MIT in oxide thin films.

Chen, Xinzhong (ORCID:0000000261033848)↗
DOE OSTI2022

Structural and optical properties of cubic GaN on U-grooved Si (100)

Cubic GaN epitaxy on large-area U-grooved silicon (100) dies is demonstrated by metalorganic chemical vapor deposition, and its structural and optical properties are reported. Scanning electron, atomic force, and transmission electron microscopy studies reveal that cubic GaN shows no discernible threading dislocations and a low stacking fault density of 3.27 ± 0.18 × 10 4 cm –1 . Temperature-dependent photoluminescence studies reveal as-grown cubic GaN band edge emission internal quantum efficiency as 25.6% ± 0.9%. Selective etching of the low-temperature AlN buffer layer, SiO 2 sidewalls, and hexagonal-phase GaN is demonstrated, which increases the cubic GaN band edge emission internal quantum efficiency to 31.6% ± 0.8%. This increase is attributed to the decrease in the radiative recombination lifetime via the removal of defective hexagonal-phase GaN. Altogether, cubic GaN on U-grooved silicon with high structural and optical quality is reported, promising its suitability for next-generation devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Shock compression of cemented tungsten carbides to 100 GPa: Structure of shock waves, Hugoniot relations, and strength

Plate impact experiments are conducted on cemented tungsten carbides (WC) with a 3.7 and 6.0 wt. % cobalt binder to better understand their dynamic, high-pressure response to 100 GPa. The measured wave profiles show propagation of steady structured waves. Standard impedance matching procedures are used to determine the Hugoniot relations in the shock velocity–particle velocity (U s –v p ) and Hugoniot stress–specific volume (P–V/V o ) planes. The Hugoniot elastic limit of the samples is controlled by ductility of the Co binder and is determined to be 4.45 ± 0.29 GPa for cemented WC with 3.7 wt. % cobalt and 3.72 ± 0.24 GPa for a 6.0 wt. % cobalt binder. Both grades show a non-linear U s –v p relationship depending on whether the particle velocity is in the strength dominated or hydrodynamic regime. In the strength dominated regime, a non-linear decrease in U s is observed as v p increases from ambient to the material’s hydrodynamic limit. In the hydrodynamic regime, the U s –v p Hugoniot is linear and is determined to be U s = 4.97(±0.006)+1.446(±0.018)v p km/s for WC with 3.7 wt. % Co and U s = 4.93(±0.006)+1.463(±0.017)v p km/s for 6 wt. % Co. Both WC grades indicate shear-stress hardening with mean stress immediately after yield, followed by pressure softening, and then a sharp fall in stress carrying capacity as the mean stress is increased to ≈70 GPa (hydrodynamic limit) and beyond. This behavior is in contrast to pure WC ceramics, which show continued shear-stress hardening with mean stress to ≈80 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Path to a single-stage, 100-GeV electron beam via a flying-focus-driven laser-plasma accelerator

Dephasingless laser wakefield acceleration (DLWFA), a novel laser wakefield acceleration concept based on the recently demonstrated “flying focus” technology, offers a new paradigm in laser-plasma acceleration that could advance the progress toward a TeV linear accelerator using a single-stage system without guiding structures. The recently proposed NSF OPAL laser facility could be the transformative technology that enables this grand challenge in laser-plasma acceleration. We review the viable parameter space for DLWFA based on the scaling of its performance with laser and plasma parameters, and we compare that performance to traditional laser wakefield acceleration. These scalings indicate the necessity for ultrashort, high-energy laser architectures such as NSF OPAL to achieve groundbreaking electron energies using DLWFA. Initial results from MTW-OPAL, the platform for the 6-J DLWFA demonstration experiment, show a tight, round focal spot over a distance of 3.7 mm. New particle-in-cell simulations of that platform indicate that using hydrogen for DLWFA reduces the amount of laser light that is distorted due to refraction at ionization fronts. An experimental path, and the computational and technical design work along that path, from the current status of the field to a single-stage, 100-GeV electron beam via DLWFA on NSF OPAL is outlined. Progress along that path is presented.

Shaw, J. L. [University of Rochester, NY (United S↗
DOE OSTI2026

Platform for 100 s Mbar equation of state measurements on the National Ignition Facility

Equation of state (EOS) measurements in the 100 s Mbar range are needed to underwrite models employed in the simulation of high energy density plasmas. To this end, a platform has been developed for fielding on the National Ignition Facility, capable of producing high-quality impedance match EOS data, wherein a planar, high-pressure, steady shock is driven into a sample package, and sample and reference standard shock velocities are measured. This platform, dubbed planar high pressure, or PHP, was fielded with an initial proof-of-concept shot in January 2023. The first PHP shot, aiming to study gold, demonstrated a pressure close to 400 Mbar, two orders of magnitude higher than previously reported gold EOS data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A 100-Mrad (Si) JFET-based Sensing and Communications System for Extreme Nuclear Instrumentation Environments

Dry cask storage is one of two storage methods approved by the U.S. Nuclear Regulatory Commission for spent fuel after removal from reactor cores. Dry casks consist of a stainless steel canister enclosed in a concrete overpack to contain the hazardous radioactive spent fuel rods and provide radiation shielding. Monitoring spent fuel storage casks is desired to ensure the safe containment of the enclosed spent fuel, but is very difficult due to the related harsh temperature and radiation environment. The sensors and associated electronics to monitor temperature, pressure, and/or radiation need to survive high temperatures and radiation doses for extended time periods. For this reason, there is a severe need for radiation-hardened electrical systems that survive well beyond the existing capabilities of commercially available radiation-rated electronic components, which have primarily been developed for space applications. Junction-gate field-effect transistor (JFET) devices are inherently radiation hardened [exceeding 100 Mrad (Si)]. Additionally, when JFETs are used as building blocks for sensing and communication electronics (i.e., oscillators, amplifiers, filters, and mixers), inherently radiation-hardened circuits can be achieved. To this end, JFET-based radiation-hardened electronics interfacing with cask-embedded sensors capable of driving modulated sensor signals through a stainless steel barrier were designed and tested at a dose rate of approximately 500 krad/h (Si) to beyond a 200-Mrad (Si) total ionizing dose. After 200 Mrad (Si), the sensor and communication circuit signals were correctly decoded at the receiver despite oscillator drift. The results from this experiment demonstrate the potential for creating more complex radiation-hardened JFET-based electrical systems for nuclear environments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Regional Economic Impacts of the Los Angeles 100% Renewable Energy Transition

To help mitigate greenhouse gas (GHGs) generation from burning fossil fuels, many state and local governments are requiring utilities to dramatically increase the share of electricity generated from renewable sources. The City of Los Angeles has set a target of 100% renewable energy by 2045 and has formulated a plan that considers nine potential alternative scenarios that differ by technology, location, and timing. Each scenario has a unique set of local investments, operating and maintenance (O&M) costs, and concomitant rate structures. In this study we develop and apply a computable general equilibrium (CGE) model built specifically for LA to estimate and compare the economic impacts for each of the scenarios over time relative to a reference case. We find differences in economic impacts across scenarios, depending on the level and timing of investment and O&M expenditures, as well as differences in the relative rate changes across scenarios. Results show that employment and economic output are positively correlated with greater capital and O&M spending, while higher electricity rates can dampen economic activity. Several scenarios generate positive economic impacts relative to the reference case, showing that the transition need not have harmful economic impacts, and all scenarios generate a number of other positive co-benefits, such as reduced damage to health from the reduction of ordinary air pollutants. The net employment impacts from 2026 to 2045 across the scenarios range from a low of 3,600 job-year losses annually to 4,700 job-year gains, both around only 0.1% of the baseline average annual employment in the city over that period. The analysis also indicates that lower-income households are relatively more affected than others by the scenarios. Overall, even in the most negatively impactful case, the economic output and employment effects are quite small when taken in the context of the overall size of the regional economy and the large reduction in GHGs.

economic impact modeling↗
DOE OSTI2025

Century: Zap Energy’s 100-kW-Scale Repetitive Sheared-Flow-Stabilized Z -Pinch System with Liquid Metal Cooling

Zap Energy is developing the sheared-flow-stabilized (SFS) Z-pinch concept for commercial applications. The SFS Z pinch relies on plasma self-organization, in the sense that plasma dynamics play a critical role in confinement. Using plasma axial current for confinement and compression eliminates the need for external confinement or heating technologies. This compact magnetic confinement technology could, in turn, provide the basis for a cost-effective deuterium-tritium fusion power plant. In addition to a robust experimental program pushing plasma performance towards breakeven conditions, Zap Energy has parallel programs developing power handling systems suitable for future power plants. Technologies under development include high average-power repetitive pulsed power, high duty-cycle cathodes, and liquid metal wall systems. Century is the name of Zap Energy’s first effort to integrate these three components into an operational system capable of firing non-reacting hydrogen SFS Z-pinch plasmas into a liquid-metal-lined container at sustained repetition rates on the order of 0.1 Hz. Here, the pulsed power driver and liquid metal heat exchanger are both designed to sustain input powers of 100 kW. Construction and initial operations with an interim ~10 kW liquid metal heat exchanger are described.

Century↗
DOE OSTI2021

The stability of Cl-, Br-, and I-passivated Si(100)-(2 × 1) in ambient environments for atomically-precise pattern preservation

Abstract Atomic precision advanced manufacturing (APAM) leverages the highly reactive nature of Si dangling bonds relative to H- or Cl-passivated Si to selectively adsorb precursor molecules into lithographically defined areas with sub-nanometer resolution. Due to the high reactivity of dangling bonds, this process is confined to ultra-high vacuum (UHV) environments, which currently limits its commercialization and broad-based appeal. In this work, we explore the use of halogen adatoms to preserve APAM-derived lithographic patterns outside of UHV to enable facile transfer into real-world commercial processes. Specifically, we examine the stability of H-, Cl-, Br-, and I-passivated Si(100) in inert N 2 and ambient environments. Characterization with scanning tunneling microscopy and x-ray photoelectron spectroscopy (XPS) confirmed that each of the fully passivated surfaces were resistant to oxidation in 1 atm of N 2 for up to 44 h. Varying levels of surface degradation and contamination were observed upon exposure to the laboratory ambient environment. Characterization by ex situ XPS after ambient exposures ranging from 15 min to 8 h indicated the Br– and I–passivated Si surfaces were highly resistant to degradation, while Cl–passivated Si showed signs of oxidation within minutes of ambient exposure. As a proof-of-principle demonstration of pattern preservation, a H–passivated Si sample patterned and passivated with independent Cl, Br, I, and bare Si regions was shown to maintain its integrity in all but the bare Si region post-exposure to an N 2 environment. The successful demonstration of the preservation of APAM patterns outside of UHV environments opens new possibilities for transporting atomically-precise devices outside of UHV for integrating with non-UHV processes, such as other chemistries and commercial semiconductor device processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Achievement of ion temperatures in excess of 100 million degrees Kelvin in the compact high-field spherical tokamak ST40

Abstract Ion temperatures of over 100 million degrees Kelvin (8.6 keV) have been produced in the ST40 compact high-field spherical tokamak (ST). Ion temperatures in excess of 5 keV have not previously been reached in any ST and have only been obtained in much larger devices with substantially more plasma heating power. The corresponding fusion triple product is calculated to be n i 0 T i 0 τ E ≈ 6 ± 2 × 10 18 m − 3 keVs . These results demonstrate for the first time that ion temperatures relevant for commercial magnetic confinement fusion can be obtained in a compact high-field ST and bode well for fusion power plants based on the high-field ST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

100 Gb/s High Throughput Serial Protocol (HTSP) for data acquisition systems with interleaved streaming

Demands on Field-Programmable Gate Array (FPGA) data transport have been increasing over the years as frame sizes and refresh rates increase. As the bandwidths requirements increase the ability to implement data transport protocol layers using "soft" programmable logic becomes harder and start to require harden IP blocks implementation. To reduce the number of physical links and interconnects, it is common for data acquisition systems to require interleaving of streams on the same link (e.g. streaming data and streaming register access). Further, this paper presents a way to leverage existing FPGA harden IP blocks to achieve a robust, low latency 100 Gb/s point-to-point link with minimal programmable logic overhead geared towards the needs of data acquisition systems with interleaved streaming requirements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Flashlamp drive system for a high-energy 10–100 kHz pulse-burst Nd:YAG laser

We present the design of the flashlamp drive system for the NG100 laser, a 1 J/pulse, 10–100 kHz, pulse-burst Nd:YAG laser system being developed for application in a Thomson scattering plasma diagnostic. This flashlamp drive system is under active development, with a prototype now being constructed. The flashlamp drive system is modular, with each module capable of driving a series pair of linear flashlamps. Each drive module contains and is controlled by a dedicated Analog Regulator Controller. Thus each module is independently operable and controllable. This modular approach imposes no intrinsic limit to the number of modules that may be applied to drive the flashlamp pairs in a laser system. Each flashlamp drive module has a switch-regulated topology. An 1800 V main capacitor bank provides 25 kJ of energy storage, while a lower voltage output capacitor bank provides filtering and the initial energy delivered to the flashlamps at the start of the drive pulse. The main bank is recharged after each flashlamp drive pulse. As energy is drawn from the output bank by the flashlamps, an IGBT switching regulator feeds current from the main bank through an inductor to replenish the output capacitor bank. The rate of replenishment is feedback-controlled to maintain a regulated supply of power to the flashlamp load, with a setpoint range of 0.07 to 1.65 MW. An Analog Regulator Controller produces two-state variable pulse width feedback switching of the regulator IGBT. The switching frequency is ≤ 20 kHz, dynamically adjusted to limit ripple of the flashlamp power to ±3% statistical standard deviation of mean. For development or troubleshooting, each module is operable independent of the laser digital control system (microcontroller and FPGA).

Plasma diagnostics - interferometry↗
DOE OSTI2020

A search for H2O masers in 100 active dwarf galaxies

ABSTRACT We present the results of the first dedicated survey for 22 GHz H2O maser emission in dwarf galaxies outside of the Local Group, with the aim of discovering disc masers. Studies of disc masers yield accurate and precise measurements of black hole (BH) mass, and such measurements in dwarf galaxies would be key to understanding the low-mass end of BH–galaxy coevolution. We used the Green Bank Telescope to survey 100 nearby (z ≲ 0.055) dwarf galaxies (M* ≲ 109.5 M⊙) with optical emission line ratios indicative of accretion on to a massive black hole. We detected no new masers down to a limit of ∼12 mJy (5σ). We compared the properties of our sample with those of ∼1850 known detections and non-detections in massive galaxies. We find, in agreement with previous studies, that masers are preferentially hosted by Seyferts and highly obscured, [O iii]-bright active galactic nuclei (AGNs). Our sample has fewer Seyferts, is less obscured, and is [O iii]-faint. Though the overall maser detection rate is ∼3 per cent in massive galaxies, the predicted rate for our sample, weighted by its optical properties, is ∼0.6–1.7 per cent, corresponding to a probability of making no detections of ∼20–50 per cent. We also found a slight increase in the detection rate with increased stellar mass in previously surveyed galaxies. However, further observations are required to discern whether there is an intrinsic difference between the maser fraction in active dwarf galaxies and in their massive counterparts for the same AGN properties.

Rosenthal, M. J.↗
DOE OSTI2023

Neutrino signatures of 100 2D Axisymmetric Core-Collapse Supernova Simulations

ABSTRACT We present in this paper a public data release of an unprecedentedly large set of core-collapse supernova (CCSN) neutrino emission models, comprising 100 detailed 2D axisymmetric radiation-hydrodynamic simulations evolved out to as late as ∼5 s post-bounce and spanning an extensive range of massive-star progenitors. The motivation for this paper is to provide a physically and numerically uniform benchmark data set to the broader neutrino detection community to help it characterize and optimize subsurface facilities for what is likely to be a once-in-a-lifetime galactic supernova burst event. With this release, we hope to (1) help the international experiment and modelling communities more efficiently optimize the retrieval of physical information about the next galactic CCSN, (2) facilitate the better understanding of core-collapse theory and modelling among interested experimentalists, and (3) help further integrate the broader supernova neutrino community.

Astronomy & Astrophysics↗