Search NASA⌕ Search

SEARCH · Search NASA

Results for “21”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Investigation of High-Subsonic Performance Characteristics of a 12 Degree 21-Inch Conical Diffuser, Including the Effects of Change in Inlet-Boundary-Layer Thickness

Investigations were conducted of a 12 degree 21-inch conical diffuser of 2:l area ratio to determine the interrelation of boundary layer growth and performance characteristics. surveys were made of inlet and exit from, longitudinal static pressures were recorded, and velocity profiles were obtained through an inlet Reynolds number range, determined From mass flows and based on inlet diameter of 1.45 x 10(exp 6) to 7.45 x 10(exp 6) and a Mach number range of 0.11 to approximately choking. These investigations were made to two thicknesses of inlet boundary layer. The mean value, over the entire range of inlet velocities, of the displacement thickness of the thinner inlet boundary layer was approximately 0.035 inch and that of the thicker inlet boundary layer was approximately six times this value. The loss coefficient in the case of the thinner inlet boundary layer had a value between 2 to 3 percent of the inlet impact pressure over most of the air-flow range. The loss coefficient with the thicker inlet boundary layer was of the order of twice that of the thinner inlet boundary layer at low speeds and approximately three times at high speeds. In both cases the values were substantially less than those given in the literature for fully developed pipe flow. The static-pressure rise for the thinner inlet boundary layer was of the order of 95 percent of that theoretically possible over the entire speed range. For the thicker inlet boundary layer the static pressure rise, as a percentage of that theoretically possible, ranged from 82 percent at low speeds to 68 percent at high speeds.

Copp, Martin R.↗

Autonomous planning and scheduling on the TechSat 21 mission

The Autonomous Sciencecraft Experiment (ASE) will fly onboard the Air Force TechSat 21 constellation of three spacecraft scheduled for launch in 2006. ASE uses onboard continuous planning, robust task and goal-based execution, model-based mode identification and reconfiguration, and onboard machine learning and pattern recognition to radically increase science return by enabling intelligent downlink selection and autonomous retargeting.

AI architectures applications intelligent agents m↗

The New Millennium Program: Technology for the 21(sup st) Century

NASA's New Millennium Program (NMP) is a space flight technology demonstration program that will validate the technologies needed to carry out the science missions that NASA envisions for the 21(sup st)century. The NMP is employing an innovative decision making process to select the specific technologies that will be flight validated.

Space flight technology decision-making process NM↗

Infrared Excess and Molecular Clouds: A Comparison of New Surveys of Far-Infrared and H I 21-cm Emission at High Latitudes

We have created a map of the large-scale infrared surface bightness in excess of that associated with the atomic interstellar medium, using region-by-region correlations between the far-infrared and 21-cm line surface brightness. Our study updates and extends a previous attempt with the Infrared Astronomical Satellite and Berkeley/Parkes H I surveys.

cosmology Diffuse Radiation Infrared ISM molecules↗

Overview of NASA's Propulsion 21 Effort

Propulsion 21 technologies contribute to reducing CO2 and NO(x) emissions and noise. Integrated Government/Industry/University research efforts have produced promising initial technical results. Graduate students from 5 partnering universities will benefit from this collaborative research--> educating the future engineering workforce. Phase 2 Efforts scheduled to be completed 3QFY06.

Long-Davis, Mary Jo↗

The Effects of Lightning NO(x) Production during the July 21 EULINOX Storm studied with a 3-D Cloud-scale Chemical Transport Model

The July 21,1998 thunderstonn observed during the European Lightning Nitrogen Oxides Project (EULINOX) project was simulated using the three-dimensional Goddard Cumulus Ensemble (GCE) model. The simulation successfully reproduced a number of observed storm features including the splitting of the original cell into a southern cell which developed supercell characteristics, and a northern cell which became multicellular. Output from the GCE simulation was used to drive an offline cloud-scale chemical transport model which calculates tracer transport and includes a parameterization of lightning NO(x) production which uses observed flash rates as input. Estimates of lightning NO(x) production were deduced by assuming various values of production per intracloud and production per cloud-to-ground flash and comparing the results with in-cloud aircraft observations. The assumption that both types of flashes produce 360 moles of NO per flash on average compared most favorably with column mass and probability distribution functions calculated from observations. This assumed production per flash corresponds to a global annual lightning NOx source of 7 Tg N per yr. Chemical reactions were included in the model to evaluate the impact of lightning NO(x), on ozone. During the storm, the inclusion of lightning NOx in the model results in a small loss of ozone (on average less than 4 ppbv) at all model levels. Simulations of the chemical environment in the 24 hours following the storm show on average a small increase in the net production of ozone at most levels resulting from lightning NO(x), maximizing at approximately 5 ppbv per day at 5.5 km. Between 8 and 10.5 km, lightning NO(x) causes decreased net ozone production.

Ott, Lesley E.↗

Nobeyama Radio Heliograph and RHESSI Observations of the X 1.5 Flare of April 21, 2002

We present an overview of the microwave (17 and 34 GHz) observations of the X1.5 flare of April 21,2002, along with RHESSI hard X-ray observations. The event lasted more than 2 hours and features a beautiful arcade of rising loops on the limb visible at X-ray, EUV and radio wavelengths. The main flare was preceded by a small event 90 minutes earlier showing a long loop ,connecting well-separated radio and hard X-ray sources. The main flare itself starts with a compact radio and hard X-ray source well inside the solar limb. As the flare proceeds a large set of loops is seen to rise well above the solar limb. Distinct regions of radio emission with very different time behavior can be identified in the radio images, and in particular a peculiar nonthermal source seen in radio and hard X-rays low in the corona at the base of the arcade is seen to turn on 30 minutes after the start of the impulsive phase. At about the same time an extremely intense burst of coherent radio emission is seen from 500 to 2000 MHz: we speculate that this lower-frequency burst is produced by electrons that are accelerated in the nonthermal source at the base of the arcade and injected into the loop system where they radiate plasma emission in the 10(exp 10)/cm(exp 3) density plasma at the top of the arcade of loops.

Kundu, Mukul R.↗

The TechSat 21 Autonomous Sciencecraft Experiment

Software has been developed to perform a number of functions essential to autonomous operation in the Autonomous Sciencecraft Experiment (ASE), which is scheduled to be demonstrated aboard a constellation of three spacecraft, denoted TechSat 21, to be launched by the Air Force into orbit around the Earth in January 2006. A prior version of this software was reported in Software for an Autonomous Constellation of Satellites (NPO-30355), NASA Tech Briefs, Vol. 26, No. 11 (November 2002), page 44. The software includes the following components: Algorithms to analyze image data, generate scientific data products, and detect conditions, features, and events of potential scientific interest; A program that uses component-based computational models of hardware to analyze anomalous situations and to generate novel command sequences, including (when possible) commands to repair components diagnosed as faulty; A robust-execution-management component that uses the Spacecraft Command Language (SCL) software to enable event-driven processing and low-level autonomy; and The Continuous Activity Scheduling, Planning, Execution, and Replanning (CASPER) program for replanning activities, including downlink sessions, on the basis of scientific observations performed during previous orbit cycles.

Sherwood, Robert↗

Erasing the Variable: Empirical Foreground Discovery for Global 21 cm Spectrum Experiments

Spectral measurements of the 21 cm monopole background have the promise of revealing the bulk energetic properties and ionization state of our universe from z approx. 6 − 30. Synchrotron foregrounds are orders of magnitude larger than the cosmological signal, and are the principal challenge faced by these experiments. While synchrotron radiation is thought to be spectrally smooth and described by relatively few degrees of freedom, the instrumental response to bright foregrounds may be much more complex. To deal with such complexities, we develop an approach that discovers contaminated spectral modes using spatial fluctuations of the measured data. This approach exploits the fact that foregrounds vary across the sky while the signal does not. The discovered modes are projected out of each line-of-sight of a data cube. An angular weighting then optimizes the cosmological signal amplitude estimate by giving preference to lower-noise regions. Using this method, we show that it is essential for the passband to be stable to at least approx. 10(exp −4). In contrast, the constraints on the spectral smoothness of the absolute calibration are mainly aesthetic if one is able to take advantage of spatial information. To the extent it is understood, controlling polarization to intensity leakage at the approx. 10(exp −2) level will also be essential to rejecting Faraday rotation of the polarized synchrotron emission. Subject headings: dark ages, reionization, first stars - methods: data analysis - methods: statistical

Variable↗

Pathway to the Galactic Distribution of Planets: Combined Spitzer and Ground-Based Microlens Parallax Measurements of 21 Single-Lens Events

We present microlens parallax measurements for 21 (apparently) isolated lenses observed toward the Galactic bulge that were imaged simultaneously from Earth and Spitzer, which was approximately 1 Astronomical Unit west of Earth in projection. We combine these measurements with a kinematic model of the Galaxy to derive distance estimates for each lens, with error bars that are small compared to the Sun's galactocentric distance. The ensemble therefore yields a well-defined cumulative distribution of lens distances. In principle, it is possible to compare this distribution against a set of planets detected in the same experiment in order to measure the Galactic distribution of planets. Since these Spitzer observations yielded only one planet, this is not yet possible in practice. However, it will become possible as larger samples are accumulated.

microlens parallax measurements↗

Sun-to-Earth Propagation of the 2015 June 21 Coronal Mass Ejection Revealed by Optical, EUV, and Radio Observations

We investigate the propagation of the 2015 June 21 CME-driven shock as revealed by the type II bursts at metricand longer wavelengths and coronagraph observations. The CME was associated with the second largest geomagneticstorm of solar cycle 24 and a large solar energetic particle (SEP) event. The eruption consisted of twoM-class flares, with the first one being confined, with no metric or interplanetary radio bursts. However, therewas intense microwave burst, indicating accelerated particles injected toward the Sun. The second flare was eruptive that resulted in a halo CME. The CME was deflected primarily by an equatorial coronal hole that resulted in the modification of the intensity profile of the associated SEP event and the duration of the CME at Earth. The interplanetary type II burst was particularly intense and was visible from the corona all the way to the vicinity of the Wind spacecraft with fundamental-harmonic structure. We computed the shock speed using the type II drift rates at various heliocentric distances and obtained information on the evolution of the shock that matched coronagraph observations near the Sun and in-situ observations near Earth. The depth of the geomagnetic storm is consistent with the 1-AU speed of the CME and the magnitude of the southward component.

Gopalswamy, N.↗

Reduction of Spectral Radiance Reflectance During the Annular Solar Eclipse of 21 June 2020 from DSCOVR/EPIC

We have analyzed three EPIC images during the annular solar eclipse on June 21, 2020 when centers of the eclipse were in the Arabian Peninsula (mostly desert), the Himalayas (mostly barren land), and China (mostly cloudy over vegetation) and compared with two images for 2017 American solar eclipse over Casper, WY and Columbia, MO (vegetated surface for both). We found that the global average reductions of spectral reflectance for the three images during 2020 solar eclipse are quite different while the reductions of spectral reflectance for the two images for 2017 solar eclipse are similar. Radiative transfer model simulations suggest that different surface spectral albedo and cloud fraction attribute to the different reduction of spectral reflectance for three images during 2020 eclipse while similar spectral albedo of vegetated surface around Casper and Columbia are the main cause for the similar spectral reflectance reduction for the two images during 2017 solar eclipse.

solar eclipse↗

Ephemeris refinement of 21 hot Jupiter exoplanets with high timing uncertainties

Transit events of extrasolar planets offer a wealth of information for planetary characterization. However, for many known targets, the uncertainty of their predicted transit windows prohibits an accurate scheduling of follow-up observations. In this work, we refine the ephemerides of 21 hot Jupiter exoplanets with the largest timing uncertainties. We collected 120 professional and amateur transit light curves of the targets of interest, observed with a range of telescopes of 0.3 m–2.2 m, and analyzed them along with the timing information of the planets discovery papers. In the case of WASP-117b, we measured a timing deviation compared to the known ephemeris of about 3.5 h, and for HAT-P-29b and HAT-P-31bthe deviation amounted to about 2 h and more. For all targets, the new ephemeris predicts transit timings with uncertainties of less than 6 min in the year 2018 and less than 13 min until 2025. Thus, our results allow for an accurate scheduling of follow-up observations in the next decade.

photometric↗

The Ionospheric Three-Dimensional Electron Density Variations Induced by the 21 August 2017 Total Solar Eclipse by Using Global Ionospheric Specification

Global Ionospheric Specification (GIS) is based on the Gauss–Markov Kalman filter to assimilate the slant total electron content (TEC) observed from ground-based GPS receivers and space-based radio occultation instrumentations in order to reconstruct three-dimensional (3D) ionospheric electron density structure, and it can remotely sense and monitor the weather condition in space. In this study, five minutes of high temporal resolution GIS is implemented in order to reconstruct the 3D electron density structure on the 21 August 2017 total solar eclipse and analyze the variations induced by the moon’s shadow. To obtain more information of the ionosphere, from the extend 2200 GPS stations on the continental United States, are added for assimilation. The results show the ionosphere peak height (hmF2) uplift was 30–50 km altitude in latitude 25–40°N, and that the electron density depletion at higher altitudes (400 km) has a more noticeable time delay than at low altitudes (200 km), especially in low-latitude regions.

Ionosphere↗

Converter Compressor Building, SWMU 089 Monitoring Well 21 Area Implementation Work Plan Kennedy Space Center, Florida

This Implementation Work Plan (IWP) was prepared by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) Contract 80KSC019D0011/80KSC019F0070, for the implementation of a bioremediation Interim Measure (IM) at the Converter Compressor Building (CCB) site located at Kennedy Space Center (KSC), Florida. The location of CCB within KSC is shown on Figure A-1. CCB has been designated as Solid Waste Management Unit (SWMU) 089 under KSC’s Resource Conservation and Recovery Act (RCRA) Corrective Action Program. The overall Corrective Action Objective (CAO) for CCB is to reduce concentrations of trichloroethene (TCE), cis-1,2-dichloroethene (cDCE), trans-1,2-dichloroethene (tDCE), and vinyl chloride (VC) to less than State of Florida Groundwater Cleanup Target Levels (GCTLs). The objective for the IM associated with this IM is to reduce groundwater concentrations for the contaminants of concern (COCs) to less than their Natural Default Attenuation Concentrations (NADCs) within the Monitoring Well 21 Area (herein referred to as MW21 Area) via bioremediation injections to support transition to long term monitoring (LTM). This IWP describes the activities that will be performed for the treatment of the MW21 Area. The Revision 1 CCB MW21 Area Interim Measure Work Plan (IMWP; NASA, 2024), which was approved by the Florida Department of Environmental Protection (FDEP) on December 26, 2024, was used as the design basis for this IWP.

Mark Jonnet↗

Snowmass'21 Accelerator Frontier

The Particle Physics Community Planning Exercise (a.k.a. “Snowmass”) is the form of organization of regular, every 6 to 8 years, discussions among the entire particle physics community to develop a scientifc vision for the future of particle physics in the U.S. and its international partners. The Snowmass’21 Accelerator Frontier activities include discussions on high-energy hadron and lepton colliders, high-intensity beams for neutrino research and for the “Physics Beyond Colliders”, accelerator technologies, science, education and outreach as well as the progress of core accelerator technology, including RF, magnets, targets and sources.

Gourlay, Stephen Alan↗