Search NASA⌕ Search

SEARCH · Search NASA

Results for “4D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electron Configuration Modulation Induced Stabilized 1T-MoS 2 for Enhanced Sodium Ion Storage

1T-MoS 2 has become an ideal anode for sodium-ion batteries (SIBs). However, the metastable feature of 1T-MoS 2 makes it difficult to directly synthesize under normal conditions. In addition, it easily transforms into 2H phase via restacking, resulting in inferior electrochemical performance. Here, the electron configuration of Mo 4d orbitals is modulated and the stable 1T-MoS 2 is constructed by nickel (Ni) introduction (1T-Ni-MoS 2 ). The original electron configuration of Mo 4d orbitals is changed via the electron injection by Ni, which triggers the phase transition from 2H to 1T phase, thus improving the electrical conductivity and accelerating the redox kinetics of the material. Consequently, 1T-Ni-MoS 2 exhibits superior rate capability (266.8 mAh g -1 at 10 A g -1 ) and excellent cycle life (358.7 mAh g -1 at 1 A g -1 after 350 cycles). In addition, the assembled Na 3 V 2 (PO 4 ) 3 /C||1T-Ni-MoS 2 full cells deliver excellent electrochemical properties and show great prospects in energy storage devices.

1T-MoS2↗
DOE OSTI2025

Valence Electron Distributions from Sub-Angstrom Convergent Beam Electron Diffraction

Modern aberration-corrected scanning transmission electron microscopes can acquire four-dimensional data sets (“4D STEM”) by recording convergent beam electron diffraction (CBED) patterns, using precisely positioned, sub-angstrom probes. Here, we demonstrate that these patterns can probe the site symmetry, atomic displacements, and valence electron distributions at individual atomic columns. To this end, 4D STEM CBED patterns were acquired from SrTiO 3 single crystals and compared with patterns calculated using scattering potentials derived from density functional theory. Here, we show that an aspherical valence electron charge build-up at the oxygen sites causes intensity asymmetries in the low-angle scattering portion of the patterns. Using strained SrTiO 3 films containing subtle polar displacements within nanometer-sized domains, it is shown that the high-angle scattering portion in each pattern is sensitive to atomic displacements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Multimodal Nanoscale Mapping of Local Structure and CO 2 Adsorption in Metal–Organic Frameworks

Diamine functionalization of the metal−organic framework Mg 2 (dobpdc) (dobpdc 4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) significantly enhances its selectivity for CO 2 capture from flue gases and air. The structure and CO 2 capacity of such materials are typically assessed using bulk techniques that rely on averaging signal over large ensembles of unit cells, obscuring local heterogeneities, such as variations in CO 2 occupancy across individual nanocrystals. To resolve this limitation, we demonstrate a multimodal, nanoscale characterization of Mg 2 (dobpdc) appended with 1,3-diaminopropane. By employing recently developed characterization techniques at progressively smaller length scales, we uncover insights from correspondingly smaller populations of unit cells. First, we use parallel-beam 3D electron diffraction (3D ED) to identify a prominent expansion in lattice parameters upon desorption of CO 2 , as observed at the level of single nanocrystals. Second, we use convergent-probe 4D scanning transmission electron microscopy (4D-STEM) to quantify associated differences in lattice strain as a function of gas loading and diamine appending. These measurements sample small subvolumes within individual nanocrystals. Finally, we apply infrared scattering scanning near-field optical microscopy (IR s- SNOM) to confirm variable CO 2 chemisorption across adsorption sites at the surface of single nanocrystals. This multimodal, multiscale approach allows us to map heterogeneity within individual nanocrystals. Collectively, these findings emphasize the importance of local, nanoscale characterization of metal−organic frameworks in revealing previously unresolvable features that impact their performance.

Karstens, Sarah L. [University of California, Berk↗
DOE OSTI2021

Nano-imaging of strain-tuned stripe textures in a Mott crystal

The 4d transition metal perovskites Ca n+1 Ru n O 3n+1 have attracted interest for their strongly interacting electronic phases showing pronounced sensitivity to controllable stimuli like strain, temperature, and even electrical current. Through multi-messenger low-temperature nano-imaging, we reveal a spontaneous striped texture of coexisting insulating and metallic domains in single crystals of the bilayer ruthenate Ca 3 (Ti x Ru 1-x ) 2 O 7 across its first-order Mott transition at T ≈ 95K. We image on-demand anisotropic nucleation and growth of these domains under in situ applied uniaxial strain rationalized through control of a spontaneous Jahn-Teller distortion. Our scanning nano-susceptibility imaging resolves the detailed susceptibility of coexisting phases to strain and temperature at the transition threshold. Comparing these nano-imaging results to bulk-sensitive elastoresistance measurements, we uncover an emergent “domain susceptibility” sensitive to both the volumetric phase fractions and elasticity of the self-organized domain lattice. Our combined susceptibility probes afford nano-scale insights into strain-mediated control over the insulator-metal transition in 4d transition metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chiral algebra, localization, modularity, surface defects, and all that

We study the 2D vertex operator algebra (VOA) construction in 4D N = 2 superconformal field theories on S 3 × S 1 , focusing on both old puzzles and new observations. The VOA lives on a two-torus T 2 ⊂ S 3 × S 1 , it is 1 2 Z -graded, and this torus is equipped with the natural choice of spin structure (1,0) for the Z + 1 2 -graded operators, corresponding to the NS sector vacuum character. By analyzing the possible refinements of the Schur index that preserves the VOA, we find that it admits discrete deformations, which allows access to the remaining spin structures (1,1), (0,1), and (0,0), of which the latter two involve the inclusion of a particular surface defect. For Lagrangian theories, we perform the detailed analysis: we describe the natural supersymmetric background, perform localization, and derive the gauged symplectic boson action on a torus in any spin structure. In the absence of flavor fugacities, the 2D and 4D path integrals precisely match, including the Casimir factors. We further analyze the 2D theory: we identify its integration cycle and the two-point functions and interpret flavor holonomies as screening charges in the VOA. Next, we make some observations about modularity; the T-transformation acts on our four partition functions and lifts to a large diffeomorphism on S 3 × S 1 . More interestingly, we generalize the four partition functions on the torus to an infinite family labeled by both the spin structure and the integration cycle inside the complexified maximal torus of the gauge group. Members of this family transform into one another under the full modular group, and we confirm the recent observation that the S-transform of the Schur index in Lagrangian theories exhibits logarithmic behavior. Finally, we comment on how locally our background reproduces the Ω-background.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Surface stability of SrNbO 3+δ grown by hybrid molecular beam epitaxy

4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO 3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d 1 Nb 4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO 3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO 3 substrates. Varying thicknesses of insulating SrHfO 3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO 3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO 3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d 1 metastable charge state under atmospheric conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multiscale electric-field imaging of polarization vortex structures in PbTiO 3 /SrTiO 3 superlattices

In ferroelectric heterostructures, the interaction between intrinsic polarization and the electric field generates a rich set of localized electrical properties. The local electric field is determined by several connected factors, including the charge distribution of individual unit cells, the interfacial electromechanical boundary conditions, and chemical composition of the interfaces. However, especially in ferroelectric perovskites, a complete description of the local electric field across micro-, nano-, and atomic-length scales is missing. Here, by applying four-dimensional scanning transmission electron microscopy (4D STEM) with multiple probe sizes matching the size of structural features, we directly image the electric field of polarization vortices in (PbTiO 3 ) 16 /(SrTiO 3 ) 16 superlattices and reveal different electric field configurations corresponding to the atomic scale electronic ordering and the nanoscale boundary conditions. The separability of two different fields probed by 4D STEM offers the possibility to reveal how each contributes to the electronic properties of the film.

36 MATERIALS SCIENCE↗
DOE OSTI2025

3D strain field reconstruction by inversion of dynamical scattering

Strain governs not only the mechanical response of materials but also their electronic, optical, and catalytic properties. For this reason, the measurement of the 3D strain field is crucial for a detailed understanding and for further development of material properties through strain engineering. However, measuring strain variations along the electron beam direction has remained a major challenge for (scanning-) transmission electron microscopy (S/TEM). In this article, we present a method for 3D strain field determination using 4D-STEM. The method is based on the inversion of dynamical diffraction effects, which occur at strain field variations along the beam direction. We test the method against simulated data with a known ground truth and demonstrate its application to an experimental 4D-STEM dataset from an inclined pseudomorphically grown Al0.47Ga0.53N layer.

Niermann, Laura↗
DOE OSTI2022

Signal formation and sharing in AC-LGADs using the ALTIROC 0 front-end chip

The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. However, finding a technology capable of fulfilling such aspiration proved to be an arduous task. Among other silicon-based candidates, the Low-Gain Avalanche Diode (LGAD) has already shown excellent timing performances but proved to be unsuitable for fine pixelization. Therefore, the AC-coupled LGAD (AC-LGAD) approach was introduced to provide high resolution in both time and space, making it a promising candidate for future 4D detectors. However, appropriate readout electronics must be developed to match the sensor's fast-time and fine-pitch capabilities. This is currently a major technological challenge. Here, we test AC-LGAD prototypes read out by the fast-time ASIC ALTIROC 0, originally developed for the readout of DC-coupled LGADs for the ATLAS experiment at the High Luminosity-LHC. Signal generated by either betas from a 90 Sr source or a focused infra-red laser were analyzed. This paper details the first successful readout of an AC-LGAD sensor using a readout chip. This result will pave the way for the design and construction of a new generation of AC-LGAD-based 4D detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 μm and 32 ps resolutions from strips of 1 cm length and 500 μm pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

4 d element induced improvement of structural disorder and development of weakly reentrant spin-glass behavior in NiRuMnSn

The pursuit of efficient spin polarization in quaternary Heusler alloys with the general formula XX'YZ (where X, X', and Y are transition metals and Z is a p-block element) has been a subject of significant scientific interest. While previous studies showed that isoelectronic substitution of a 4d element in place of a 3d element in quaternary Heusler alloys improves the half-metallic ferromagnetic characteristics, our research here, on the quaternary Heusler alloy NiRuMnSn, reveals a strikingly different scenario. In this study, we present a detailed structural analysis of the material using x-ray absorption fine structure and neutron diffraction techniques which confirms the formation of a single-phase compound with 50:50 site disorder between Ni and Ru atoms at 4c and 4d sites. Contrary to expectations, our density functional theory calculations suggest a considerable decrease in spin polarization even in the ordered structure. Additionally, we report on the compound's exceptional behavior, displaying a rare reentrant spin-glass property below ~ 60 K, a unique and intriguing feature for quaternary Heusler-type compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Transition between Heavy-Fermion-Strange-Metal and Quantum Spin Liquid in a $4⁢d$-Electron Trimer Lattice

We present experimental evidence that a heavy Fermi surface consisting of itinerant, charge-neutral spinons underpins both heavy-fermion-strange-metal (without f electrons) and quantum-spin-liquid states in the 4d-electron trimer lattice, Ba 4 Nb 1-x Ru 3+x O 12 (|x| < 0.20). These two exotic states both exhibit an extraordinarily large entropy, a linear heat capacity extending into the milli-Kelvin regime, a linear thermal conductivity at low temperatures, and separation of charges and spins. Furthermore, the insulating spin liquid is a much better thermal conductor than the heavy-fermion-strange-metal that separately is observed to strongly violate the Wiedemann- Franz law. Here, we propose that at the heart of this 4d system is a universal, heavy spinon Fermi surface that provides a unified framework for explaining the exotic phenomena observed throughout the entire series. The control of such exotic ground states provided by variable Nb concentration offers a new paradigm for studies of correlated quantum matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

FEFF analysis of americium oxides

The Am N 4,5 (4d 3/2 and 4d 5/2 ) and Am O 4,5 (5d 3/2 and 5d 5/2 ) x-ray absorption spectroscopy (XAS) of americium sesquioxide (Am 2 O 3 ) and americium dioxide (AmO 2 ) has been evaluated with FEFF, a Green's function–based, multiple scattering code. Taking guidance from the intermediate coupling model (ICM), applicable to local and nonmagnetized samples, it is possible to completely reconstruct the experimental results for the N 4,5 spectra, including the observed differences between the Am 2 O 3 and the AmO 2 cases. Although complicated by a more asymmetric line shape and difficult background variations, the FEFF analysis confirms the absence of core hole angular momentum coupling in Am O 4,5 spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optical versus radiographic imaging and tomography: introduction to the ROADS feature issue

Optical imaging is an ancient branch of imaging dating back to thousands of years. Radiographic imaging and tomography (RadIT), including the first use of X-rays by Wilhelm Röntgen, and then, $γ$ -rays, energetic charged particles, neutrons, etc. are about 130 years young. The synergies between optical and radiographic imaging can be cast in the framework of these building blocks: Physics, Sources, Detectors, Methods, and Data Science, as described in Appl. Opt. 61, RDS1 (2022). Optical imaging has expanded to include three-dimensional (3D) tomography (including holography), due in to part the invention of optical (including infrared) lasers. RadIT are intrinsically 3D because of the penetrating power of ionizing radiation. Both optical imaging and tomography (OIT) and RadIT are evolving into even higher dimensional regimes, such as time-resolved tomography (4D) and temporarily and spectroscopically resolved tomography (4D + ). Further advances in OIT and RadIT will continue to be driven by desires for higher information yield, higher resolutions, and higher probability models with reduced uncertainties. Synergies in quantum physics, laser-driven sources, low-cost detectors, data-driven methods, automated processing of data, and artificially intelligent data acquisition protocols will be beneficial to both branches of imaging in many applications. These topics, along with an overview of the Radiography, Applied Optics, and Data Science virtual feature issue, are discussed here.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Four-dimensional dynamics of multirotational transition stimulated rotational Raman scattering in air

Stimulated rotational Raman scattering in air is a powerful parasitic process that degrades high intensity laser beams and pulses propagated over significant distances. Conversely, it is used beneficially in the context of Raman lasers. Through this inelastic scattering process, laser photons are converted to higher (anti-Stokes) or lower (Stokes) energies, according to rotational mode transitions in nitrogen and oxygen diatomic molecules. The full wave-mixing problem involves numerous frequencies, and it is consistently assumed that only one rotational mode contributes to the conversion process. We instead present a dynamic 4D multirotational model that is implemented in a parallelized manner within the Virtual Beamline++ optical modeling package allowing high-resolution 4D studies. We highlight the effect that spontaneous emission plays in large and small beam-width setups, even in the highly saturating regime. The weaker transition modes play a large role in the persistent dynamics and can lead to complex spatiotemporal coupling through nonlinear competition of the modes. We highlight how and why these weaker modes persist, how the size and shape of speckle patterns depends highly on the initial beam profile, and how weaker modes can transiently become stronger as a result of such competition.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Memory and CPU efficient coherent mode decomposition of partially coherent synchrotron radiation with subtraction of common quadratic phase terms

Application examples of a memory and CPU efficient coherent mode decomposition (CMD) method for wave-optics based simulation of the partially coherent undulator radiation propagation through a hard X-ray beamline in a 3rd generation synchrotron radiation source are presented. The high efficiency of the method is achieved thanks to the analytical treatment of the common quadratic phase terms that are developed in the phase of cross-spectral density (CSD) of partially coherent radiation at a distance from source. This treatment allows for a considerable, several orders of magnitude, reduction of the 4D CSD mesh density (and the memory occupied by the CSD) required for ensuring sufficient accuracies of wavefront propagation simulations with the modes produced by the CMD at a beamline entrance. This method, implemented in the “Synchrotron Radiation Workshop” open-source software, dramatically increases the feasibility of the CMD of 4D CSD for producing 2D coherent modes for a large variety of applications at storage rings and other types of radiation sources.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Time Lapse VSP Integration Workflow: A Case Study at Farnsworth CO2-EOR Project

Abstract This study aims to develop a 4D Vertical Seismic Profile (VSP) integration workflow to improve the prediction of subsurface stress changes. The selected study site is a 5-spot pattern within the ongoing CO2-EOR operations at the Farnsworth Field Unit FWU in Ochiltree County, Texas. The specific pattern has undergone extensive geological and geomechanical characterization through the acquisition of 3D seismic data, geophysical well logs, and core. This workflow constrains a numerical hydromechanical model by applying a penalty function formed between "modeled" versus "observed" time-lapse compressional and shear seismic velocity changes. Analyses of geophysical logs and ultra-sonic measurements on core exhibit measurable sensitivities to changes in both fluid saturation and mean effective stress. These data are used to develop a site-specific rock physics model and stress-velocity relationship, which inform the numerical models used to generate the "modeled" portion of the penalty function. The "observed" portion of the penalty function is provided by a novel elastic full-waveform inversion of the available 3D baseline and three monitor surveys to produce high-quality estimates of time-lapse compressional and shear seismic velocity changes. The modeling workflow accounts sequentially for fluid substitution and stress impacts. Hydrodynamic and geomechanical properties of the 3D coupled numerical model are estimated through geostatistical integration of well log and core data with 3D seismic inversion products. Changes in seismic velocities due to fluid substitution are computed using the Biot-Gassmann workflow and site-specific rock physics. Stress impacts on time-lapse seismic velocity changes are modeled from the effective stress output of the hydromechanical model and are initially based on the velocity versus effective stress relationship extracted from core mechanical testing. Based on the principle of superposition of seismic wavefields, seismic velocity changes attributed to fluid substitution and that due to changes in mean effective stress are treated as linearly additive. The modeled results are upscaled using Backus averaging to reconcile scale discrepancies between the modeled and measured datasets to formulate the penalty function. This manuscript presents the forward modeling process and concludes that for the base case, the seismic velocity changes due to mean effective stress dominates over the seismic velocity changes attributed to fluid substitution because of the extensive range of the pressure perturbations. Successful minimization of this penalty function calibrates the coupled hydrodynamic geomechanical numerical model and affirms the suitability of acoustic time-lapse measurements such as 4D-VSP for geomechanical calibration.

02 PETROLEUM↗
DOE OSTI2020

Open Source Platform for Live Processing of High Data Rate Electron Microscopy (SBIR Phase I Award Topic 15, Subtopic B, Final Scientific / Technical Report)

4D scanning transmission electron microscopy (STEM) is experiencing a revolution both in terms of data size, and data veracity, as are many other areas of experimental data acquisition. This presents enormous opportunities to make new scientific discoveries, but is also hamstrung by aging software that is no longer fit for purpose. Experimental data acquisition platforms must make the same investments in software infrastructure that the simulation community made decades ago to take advantage of high-performance computing (HPC) if they hope to realize the full potential of the latest advances made in detector technology. This requires rethinking the design and deployment of hardware, moving away from small, fixed commodity computing capabilities with closed interfaces to open, modular, scalable systems designed for parallelism and throughput. The technical approach will leverage best-in-class open source technologies, and develop new approaches strategically to build an open source platform for experimental data acquisition targeting high data rate electron microscopy. The project will develop a software platform that uses the power and performance of modern HPC resources to ingest the large volume of data produced by electron microscopes using direct electron detectors. A set of configurable pipelines will be used to enable the processing to be tailored to the problem being investigated with builtin visualization of data at interactive rates. This project will leverage investments made by the DOE and other agencies to provide a powerful software platform for the experimental data community working with most powerful electron microscopes, such as 4D STEM detectors. It will create a platform that serves as a reference for the community. Permissive open source licensing will make the platform available to all, with a simple deployment strategy offering the ability to keep data close to where it is generated. This advanced software platform will require customization for each deployment, creating opportunities for software services that are typically offered to extend open source software platforms.

97 MATHEMATICS AND COMPUTING↗