Search NASA⌕ Search

SEARCH · Search NASA

Results for “AEROSOL PARTICLE PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantifying and Modeling the Impact of Phase State on the Ice Nucleation Abilities of 2-Methyltetrols as a Key Component of Secondary Organic Aerosol Derived from Isoprene Epoxydiols

Organic aerosols (OAs) may serve as ice-nucleating particles (INPs), impacting the formation and properties of cirrus clouds when their phase state and viscosity are in the semisolid to glassy range. However, there is a lack of direct parameterization between aerosol viscosity and their ice nucleation capabilities. In this study, we experimentally measured the ice nucleation rate of 2-methyltetrols (2-MT) aerosols, a key component of isoprene-epoxydiol-derived secondary organic aerosols (IEPOX-SOA), at different viscosities. These results demonstrate that the phase state has a significant impact on the ice nucleation abilities of OA under typical cirrus cloud conditions, with the ice nucleation rate increasing by 2 to 3 orders of magnitude when the phase state changes from liquid to semisolid. An innovative parametric model based on classical nucleation theory was developed to directly quantify the impact of viscosity on the heterogeneous nucleation rate. This model accurately represents our laboratory measurement and can be implemented into climate models due to its simple, equation-based form. Based on data collected from the ACRIDICON-CHUVA field campaign, our model predicts that the INP concentration from IEPOX-SOA can reach the magnitude of 1 to tens per liter in the cirrus cloud region impacted by the Amazon rainforest, consistent with recent field observations and estimations. This novel parameterization framework can also be applied in regional and global climate models to further improve representations of cirrus cloud formation and associated climate impacts.

2-methyltetrol↗
NASA NTRS1978

Properties of the stratospheric aerosol layer studied with a one-dimensional computer model

Aerosol particle effects are often neglected in theoretical studies of stratospheric phenomena. In reality, the particulate matter normally found above the tropopause may influence the terrestrial radiation balance, catalyze heterogeneous chemical interactions, and serve as a tracer of atmospheric motions. The paper proposes a one-dimensional model of the stratospheric aerosol layer, and it is used to compare aerosol theory with observational data. The model considers gaseous sulfur photochemistry and the physical aerosol processes of nucleation, coagulation, sedimentation, and diffusion. Calculations of the effects on the aerosol layer of stratospheric injections of aluminum oxide particles by Space Shuttle engines and of sulfur dioxide molecules by volcanic activity are performed. The relation between measured aerosol variability and changes in stratospheric air temperatures and vertical transport rates are discussed.

Turco, R. P.↗
DOE OSTI2020

Computational predictions of porosities, pore size distributions, and conductivities of aerosol deposited particulate films

The structure and resulting physical properties of aerosol deposited particulate films are governed by the size distribution and morphology of the depositing particles as well as the physics governing particle deposition. While particulate film deposition processes are qualitatively understood, the link between particle characteristics and deposition physics to film properties has not been probed systematically. Here we apply a combination of Langevin dynamics deposition simulations, Monte Carlo pore size distribution calculations, and predictions of thermal conductivities to better establish such process parameter-film property relationships. Furthermore, we account for partial coalescence, polydispersity, and aggregate deposition. We establish that the deposition of polydisperse and aggregated particles leads to broadening of the pore size distribution function and an increase in the mode pore size. Via a non-continuum gas conductivity model, we show that aerosol deposited films can achieve porosities and thermal conductivities similar to conventional aerogels.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Principles in Remote Sensing of Aerosol from MODIS Over Land and Ocean

The well-calibrated spectral radiances measured by MODIS will be processed to retrieve daily aerosol properties that include optical thickness and mass loading over land and optical thickness, the mean particle size of the dominant mode and the ratio between aerosol modes over ocean. In addition, after launch, aerosol single scattering albedo will be calculated as an experimental product. The retrieval process over land is based on a dark target method that identifies appropriate targets in the mid-IR channels and uses an empirical relationship found between the mid-ER and the visible channels to estimate surface reflectance in the visible from the mid-HZ reflectance measured by satellite. The method employs new aerosol models for industrial, smoke and dust aerosol. The process for retrieving aerosol over the ocean makes use of the wide spectral band from 0.55-2.13 microns and a look-up table constructed from combinations of five accumulation modes and five coarse modes. Both the over land and over ocean algorithms have been validated with satellite and airborne radiance measurements. We estimate that MODIS will be able to measure aerosol optical thickness (t) to within 0.05 +/- 0.2t over land and to within 0.05 +/- 0.05t over ocean. Much of the earth's surface is located far from aerosol sources and experience very low aerosol optical thickness. Will the accuracy expected from MODIS retrievals be sufficient to measure the global aerosol direct and indirect forcing? We are attempting to answer this question using global model results and cloud climatology.

Remer, L. A.↗
NASA NTRS2014

Global and Regional Impacts of HONO on the Chemical Composition of Clouds and Aerosols

Recently, realistic simulation of nitrous acid (HONO) based on the HONO/NO(sub x) ratio of 0.02 was found to have a significant impact on the global budgets of HO(sub x) (OH + HO2) and gas phase oxidation products in polluted regions, especially in winter when other photolytic sources are of minor importance. It has been reported that chemistry-transport models underestimate sulphate concentrations, mostly during winter. Here we show that simulating realistic HONO levels can significantly enhance aerosol sulphate (S(VI)) due to the increased formation of H2SO4. Even though in-cloud aqueous phase oxidation of dissolved SO2 (S(IV)) is the main source of S(VI), it appears that HONO related enhancement of H2O2 does not significantly affect sulphate because of the predominantly S(IV) limited conditions, except over eastern Asia. Nitrate is also increased via enhanced gaseous HNO3 formation and N2O5 hydrolysis on aerosol particles. Ammonium nitrate is enhanced in ammonia-rich regions but not under ammonia-limited conditions. Furthermore, particle number concentrations are also higher, accompanied by the transfer from hydrophobic to hydrophilic aerosol modes. This implies a significant impact on the particle lifetime and cloud nucleating properties. The HONO induced enhancements of all species studied are relatively strong in winter though negligible in summer. Simulating realistic HONO levels is found to improve the model measurement agreement of sulphate aerosols, most apparent over the US. Our results underscore the importance of HONO for the atmospheric oxidizing capacity and corroborate the central role of cloud chemical processing in S(IV) formation.

HONO↗
NASA NTRS2014

Global and Regional Impacts of HONO on the Chemical Composition of Clouds and Aerosols

Recently, realistic simulation of nitrous acid (HONO) based on the HONO / NOx ratio of 0.02 was found to have a significant impact on the global budgets of HOx (OH + HO2) and gas phase oxidation products in polluted regions, especially in winter when other photolytic sources are of minor importance. It has been reported that chemistry-transport models underestimate sulphate concentrations, mostly during winter. Here we show that simulating realistic HONO levels can significantly enhance aerosol sulphate (S(VI)) due to the increased formation of H2SO4. Even though in-cloud aqueous phase oxidation of dissolved SO2 (S(IV)) is the main source of S(VI), it appears that HONO related enhancement of H2O2 does not significantly affect sulphate because of the predominantly S(IV) limited conditions, except over eastern Asia. Nitrate is also increased via enhanced gaseous HNO3 formation and N2O5 hydrolysis on aerosol particles. Ammonium nitrate is enhanced in ammonia-rich regions but not under ammonia-limited conditions. Furthermore, particle number concentrations are also higher, accompanied by the transfer from hydrophobic to hydrophilic aerosol modes. This implies a significant impact on the particle lifetime and cloud nucleating properties. The HONO induced enhancements of all species studied are relatively strong in winter though negligible in summer. Simulating realistic HONO levels is found to improve the model measurement agreement of sulphate aerosols, most apparent over the US. Our results underscore the importance of HONO for the atmospheric oxidizing capacity and corroborate the central role of cloud chemical processing in S(IV) formation

Global and regional impacts↗
DOE OSTI2022

Discrimination between individual dust and bioparticles using aerosol time-of-flight mass spectrometry

Ice nucleating particles (INPs) impact cloud properties and precipitation processes through their ability to trigger cloud glaciation. Dust and bioparticles are two important sources of INPs that have markedly different atmospheric loadings and ice nucleating efficiencies. In situ identification of the sources of INPs in clouds has been accomplished using single particle mass spectrometry (SPMS). However, external mixtures of dust and bioparticles present a unique challenge as they have overlapping mass spectral ion signatures, complicating their unambiguous identification. This study presents a detailed discussion of dust and bioparticle SPMS signatures, uniting data from a broad array of studies. As emphasized, the ion signals from both dust and bioparticles are highly sensitive to ionization conditions. To understand the observed variations, we characterize the mass spectral dependence of distinct dust and bioparticle samples using total positive ion intensity (TPII) as an indicator of the laser pulse energy each particle encountered. Through this analysis, a broad range of characteristic biogenic low intensity ion peaks that may be useful to distinguish bioparticles from dust became apparent and are highlighted. Insights informed by this analysis were utilized to identify bioparticles in ambient SPMS data. Ambient particles exhibiting both dust and characteristic biogenic spectral fingerprints were excluded from the bioparticle classification. Although bioparticles only made up 0.2% of all sampled particles, their abundance was moderately correlated with INP concentrations measured at 15 °C.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A global study of hygroscopicity-driven light-scattering enhancement in the context of other in situ aerosol optical properties

The scattering and backscattering enhancement factors (ƒ(RH) and ƒ b (RH)) describe how aerosol particle light scattering and backscattering, respectively, change with relative humidity (RH). They are important parameters in estimating direct aerosol radiative forcing (DARF). In this study we use the dataset presented in Burgos et al. (2019) that compiles ƒ(RH) and ƒ b (RH) measurements at three wavelengths (i.e., 450, 550 and 700 nm) performed with tandem nephelometer systems at multiple sites around the world. We present an overview of ƒ(RH) and ƒ b (RH) based on both long-term and campaign observations from 23 sites representing a range of aerosol types. The scattering enhancement shows a strong variability from site to site, with no clear pattern with respect to the total scattering coefficient. In general, higher ƒ(RH) is observed at Arctic and marine sites, while lower values are found at urban and desert sites, although a consistent pattern as a function of site type is not observed. The backscattering enhancement ƒ b (RH) is consistently lower than ƒ(RH) at all sites, with the difference between ƒ(RH) and ƒ b (RH) increasing for aerosol with higher ƒ(RH). This is consistent with Mie theory, which predicts higher enhancement of the light scattering in the forward than in the backward direction as the particle takes up water. Our results show that the scattering enhancement is higher for PM 1 than PM 10 at most sites, which is also supported by theory due to the change in scattering efficiency with the size parameter that relates particle size and the wavelength of incident light. At marine-influenced sites this difference is enhanced when coarse particles (likely sea salt) predominate. For most sites, ƒ(RH) is observed to increase with increasing wavelength, except at sites with a known dust influence where the spectral dependence of ƒ(RH) is found to be low or even exhibit the opposite pattern. The impact of RH on aerosol properties used to calculate radiative forcing (e.g., single-scattering albedo, ω 0 , and backscattered fraction, b) is evaluated. The single-scattering albedo generally increases with RH, while b decreases. The net effect of aerosol hygroscopicity on radiative forcing efficiency (RFE) is an increase in the absolute forcing effect (negative sign) by a factor of up to 4 at RH = 90 % compared to dry conditions (RH < 40 %). Because of the scarcity of scattering enhancement measurements, an attempt was made to use other more commonly available aerosol parameters (i.e., ω 0 and scattering Ångström exponent, α sp ) to parameterize ƒ(RH). The majority of sites (75 %) showed a consistent trend with ω 0 (higher ƒ(RH = 85 %) for higher ω 0 ), while no clear pattern was observed between ƒ(RH = 85 %) and αsp. This suggests that aerosol ω 0 is more promising than α sp as a surrogate for the scattering enhancement factor, although neither parameter is ideal. Nonetheless, the qualitative relationship observed between ω 0 and ƒ(RH) could serve as a constraint on global model simulations.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Quantifying Uncertainty in Particle Size Distribution Parameters Inferred from SAGE III/ISS Extinction Spectra

Stratospheric aerosols play key roles in the chemistry and radiation balance of the atmosphere and are a key input parameter for global chemistry and climate models. The degree to which aerosols impact chemistry and radiation balance depends primarily on their microphysical properties such as particle size distribution (PSD). The PSD is a mathematical description of the relative abundance of different sized particles within a sampling volume. If the PSD is accurately known then other key modeling parameters (e.g., surface area density) can be derived. Occultation observations from orbital instruments such as SAGE III/ISS have been used to infer these PSD parameters by inverting the extinction coefficient spectra. However, past efforts failed to address two key issues with this methodology: 1. The measurement uncertainty was not accounted for; 2. They assumed the PSDs to be single-mode only, while “real-world” PSDs are predominantly bi-modal. Accounting for both issues in the retrieval will yield an expanded solution space to the inferred PSD parameters; the question is “by how much?” To address this knowledge gap, we propose to carry out a series of simulations and, for every valid SAGE III/ISS data point, determine the range of PSD parameters that yield extinction spectra that are indistinguishable from the SAGE III/ISS data, within the limits of the reported uncertainty. Further, we will expand the solution space, for the first time, to include bimodal distributions. The results of this work will advance Earth system modeling/prediction capability through identifying the uncertainty of PSD parameter estimates using SAGE III/ISS data. The key benefits of this study over previous studies are twofold: 1. we will provide PSD estimates that include bimodal distributions in the solution space, 2. we will provide an uncertainty estimate for these parameters. The results of this study may be used directly in current and future climate and chemistry models.

SAGE III/ISS↗
DOE OSTI2020

Understanding Biomass Burning Aerosol via Integrated Analyses of Aerosol Mass Spectrometry Data from DOE Campaigns and ACRF Long Term Measurements

Biomass burning (BB) is one of the largest sources of aerosol particles in the atmosphere and a significant source of trace gases important to atmospheric chemistry. Organic aerosols from biomass burning sources (BBOA) are an important but poorly characterized component of the earth’s climate system. BBOA composition and life cycle processes are associated with enormous complexities and contribute significantly to model uncertainties. Hence it is important to improve the ability to simulate the concentration and properties (chemical, optical, and hygroscopic) of BBOA and the atmospheric aging processes that affect these properties. Here, we propose to analyze ambient data collected from the DOE Biomass Burning Observation Project (BBOP) field campaign and from a long term measurement site of the Atmospheric Radiation Measurement (ARM) program – the Southern Great Plains (SGP), where transported BB plumes and elevated BBOA episodes were frequently observed. This project is aimed at 1) gaining detailed, quantitative understanding of the chemical and physical properties of BBOA and their chemical changes during atmospheric aging via advanced analysis of aerosol measurement data acquired at the summit of Mt. Bachelor (MBO) during the BBOP campaign and through integration with concurrent measurements of trace gases, particle properties, and meteorological conditions performed at MBO and from the G-1 aircraft; 2) gaining better understanding of BBOA properties and its roles in radiative forcing via analysis of routine data from the ARM long-term measurement sites; and 3) integrating the results from 1) and 2) into a global database of aerosol mass spectrometry and collaborate with modelers on evaluating and improving numerical model performance as part of the ASR program.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Examining the vertical heterogeneity of aerosols over the Southern Great Plains

Abstract. Atmospheric aerosols affect the global energy budget by scattering and absorbing sunlight (direct effects) and by changing the microphysical structure, lifetime, and coverage of clouds (indirect effects). Both aerosol direct and indirect effects are affected by the vertical distribution of aerosols in the atmosphere, which is further influenced by a range of processes, such as aerosol dynamics, long-range transport, and entrainment. However, many observations of these processes are based on ground measurements, limiting our ability to understand the vertical distribution of aerosols and simulate their impact on clouds and climate. In this work, we examined the vertical heterogeneity of aerosols over the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) using data collected from the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) campaign. The vertical profiles of meteorological and aerosol physiochemical properties up to 2500 m above are examined based on the 38 flights conducted during the HI-SCALE campaign. The aerosol properties over the SGP show strong vertical heterogeneity and seasonal variabilities. The aerosol concentrations at the surface are the highest due to strong emissions at ground level. In general, the mode diameter of aerosols during summer (∼ 100 nm) is larger than that during spring (∼ 30 nm), a result of enhanced condensational growth due to enriched volatile organic compounds in summer. The concentration of aerosols below 30 nm in the boundary layer (BL) (e.g., below 1000 m) during spring is higher than that during summer, a result of the stronger new particle formation (NPF) events due to the reduced condensation sink in spring. In the BL, the size of the aerosols gradually increases with altitude due to condensational growth and cloud processing. However, the chemical composition of the aerosols remained similar, with organics and sulfates representing 59.8 ± 2.2 % and 22.7 ± 2.1 %, respectively, of the total mass in the BL. Through the vertical profiles of aerosol properties, we observed NPF events in the upper BL during 7 out of 38 research flights, where the newly formed particles continue to grow as they are mixed down to the surface. There is also an indication that deep convection brings aerosols from the free troposphere (FT) to the surface, where they grow to contribute to the cloud condensation nuclei (CCN). Overall, the vertical heterogeneity of aerosols over the SGP is influenced by aerosol dynamics (new particle formation, growth, and cloud processing) and transport processes (mixing in the BL, long-range transport, entrainment, and convective downward transport). Case studies showing the influence of these factors are discussed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

Studies of Ice Nucleating Aerosol Particles in Arctic Cloud Systems

The focus of this research is to improve the understanding of ice nucleating aerosol particles (IN) and the role they play in ice formation in Arctic clouds. IN are important for global climate issues in a variety of ways. The primary effect is their role in determining the phase (liquid or solid) of cloud particles. The microscale impact is on cloud particle size, growth rate, shape, fall speed, concentration, radiative properties, and scavenging of gases and aerosols. On a larger scale, ice formation affects the development of precipitation (rate, amount, type, and distribution), latent heat release (rate and altitude), ambient humidity, the persistence of clouds, and cloud albedo. The overall goals of our FIRE 3 research are to characterize the concentrations and variability of Arctic IN during the winter-spring transition, to compare IN measurements with ice concentrations in Arctic clouds, and to examine selected IN samples for particle morphology and chemical there are distinguishable chemical signatures. The results can be combined with other measurements of aerosols, gaseous species, and cloud characteristics in order to understand the processes that determine the phase and concentration of cloud particles.

Rogers, David C.↗
DOE OSTI2025

Global quantification of the dispersion effect with POLDER satellite data

Increased aerosols can modify the shape of the cloud Particle Size Distribution (PSD), thereby influencing the radiative properties of clouds, known as the Dispersion Effect (DE). However, a global, observation-based quantification of its impact on Aerosol-Cloud Interactions (ACI) is lacking, leading to DE being typically ignored in satellite-based estimates of ACI forcing. Here we propose a physics-based method that combines polarimetric satellite data on cloud PSD to achieve global observational quantification of DE’s impact on ACI in liquid-phase stratiform clouds. Globally, DE offsets ACI changes induced by droplet number concentration variation and liquid water path adjustment by 7% and −1.4%, respectively. Furthermore, a parameterization based on the global dataset of PSD shape parameters is developed to improve DE estimation in large-scale models. Both the quantification and parameterization enhance our understanding of DE and facilitate the inclusion of this non-negligible impact of DE on ACI in estimating aerosol climate forcing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Emulating aerosol optics with randomly generated neural networks

Abstract. Atmospheric aerosols have a substantial impact on climate and remain one of the largest sources of uncertainty in climate prediction. Accurate representation of their direct radiative effects is a crucial component of modern climate models. However, direct computation of the radiative properties of aerosol populations is far too computationally expensive to perform in a climate model, so optical properties are typically approximated using a parameterization. This work develops artificial neural networks (ANNs) capable of replacing the current aerosol optics parameterization used in the Energy Exascale Earth System Model (E3SM). A large training dataset is generated by using Mie code to directly compute the optical properties of a range of atmospheric aerosol populations given a large variety of particle sizes, wavelengths, and refractive indices. Optimal neural architectures for shortwave and longwave bands are identified by evaluating ANNs with randomly generated wirings. Randomly generated deep ANNs are able to outperform conventional multilayer-perceptron-style architectures with comparable parameter counts. Finally, the ANN-based parameterization produces significantly more accurate bulk aerosol optical properties than the current parameterization when compared with direct Mie calculations using mean absolute error. The success of this approach makes possible the future inclusion of much more sophisticated representations of aerosol optics in climate models that cannot be captured by extension of the existing parameterization scheme and also demonstrates the potential of random-wiring-based neural architecture search in future applications in the Earth sciences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Novel estimation of aerosol processes with particle size distribution measurements: a case study with the TOMAS algorithm v1.0.0

Atmospheric aerosol microphysical processes are a significant source of uncertainty in predicting climate change. Specifically, aerosol nucleation, emissions, and growth rates, which are simulated in chemical transport models to predict the particle size distribution, are not understood well. However, long-term size distribution measurements made at several ground-based sites across Europe implicitly contain information about the processes that created those size distributions. This work aims to extract that information by developing and applying an inverse technique to constrain aerosol emissions as well as nucleation and growth rates based on hourly size distribution measurements. We developed an inverse method based upon process control theory into an online estimation technique to scale aerosol nucleation, emissions, and growth so that the model–measurement bias in three measured aerosol properties exponentially decays. The properties, which are calculated from the measured and predicted size distributions, used to constrain aerosol nucleation, emission, and growth rates are the number of particles with a diameter between 3 and 6 nm, the number with a diameter greater than 10 nm, and the total dry volume of aerosol ( N 3–6 , N 10 , V dry ), respectively. In this paper, we focus on developing and applying the estimation methodology in a zero-dimensional “box” model as a proof of concept before applying it to a three-dimensional simulation in subsequent work. The methodology is first tested on a dataset of synthetic and perfect measurements that span diverse environments in which the true particle emissions, growth, and nucleation rates are known. The inverse technique accurately estimates the aerosol microphysical process rates with an average and maximum error of 2 % and 13 %, respectively. Next, we investigate the effect that measurement noise has on the estimated rates. The method is robust to typical instrument noise in the aerosol properties as there is a negligible increase in the bias of the estimated process rates. Finally, the methodology is applied to long-term datasets of in situ size distribution measurements in western Europe from May 2006 through June 2007. At Melpitz, Germany, and Hyytiälä, Finland, the average diurnal profiles of estimated 3 nm particle formation rates are reasonable, having peaks near noon local time with average peak values of 1 and 0.15 cm –3 s –1 , respectively. The normalized absolute error in estimated N 3–6 , N 10 , and V dry at three European measurement sites is less than 15 %, showing that the estimation framework developed here has potential to decrease model–measurement bias while constraining uncertain aerosol microphysical processes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Radiative transfer code based estimation of atmospheric parameters for inversion of imaging spectrometer measured radiance to apparent surface reflectance

Surface reflectance is required to quantitatively investigate molecular absorption and particle scattering properties of materials on the Earth's surface. Atmospheric aerosol optical depth, surface pressure and water vapor are required to constrain a radiative transfer code for the inversion of measured spectral radiance to apparent surface reflectance. A suite of algorithms using nonlinear least squares fitting techniques are described that directly estimate these atmospheric parameters from spectral radiance measured by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). The derived atmospheric parameters are used to constrain a radiative transfer code for the inversion of the imaging spectrometer radiance to apparent reflectance. The derived apparent reflectance is validated with respect to in situ measurement on the same target.

Green, Robert O.↗
NASA NTRS2004

Spectral Absorption of Solar Radiation by Aerosols during ACE-Asia

As part of the Asian Pacific Regional Aerosol Characterization Experiment (ACE-Asia), the upward and downward spectral solar radiant fluxes were measured with the Spectral Solar Flux Radiometer (SSFR), and the aerosol optical depth was measured with the Ames Airborne Tracking Sunphotometer (AATS-14) aboard the Center for INterdisciplinary Remotely-Piloted Aircraft Studies (CIRPAS) Twin Otter aircraft. IN this paper, we examine the data obtained for two cases: a moderately thick aerosol layer, 12 April, and a relatively thin aerosol case, 16 April 2001. ON both days, the Twin Otter flew vertical profiles in the Korean Strait southeast of Gosan Island. For both days we determine the aerosol spectral absorption of the layer and estimate the spectral aerosol absorption optical depth and single-scattering albedo. The results for 12 April show that the single-scattering albedo increases with wavelength from 0.8 at 400 nm to 0.95 at 900 nm and remains essentially constant from 950 to 1700 nm. On 16 April the amount of aerosol absorption was very low; however, the aerosol single-scattering albedo appears to decrease slightly with wavelength in the visible region. We interpret these results in light of the two absorbing aerosol species observed during the ACE-asia study: mineral dust and black carbon. The results for 12 April are indicative of a mineral dust-black carbon mixture. The 16 April results are possibly caused by black carbon mixed with nonabsorbing pollution aerosols. For the 12 April case we attempt to estimate the relative contributions of the black carbon particles and the mineral dust particles. We compare our results with other estimates of the aerosol properties from a Sea-Viewing Wide Field-of-View Sensor (SeaWiFS) satellite analysis and aerosol measurements made aboard the Twin Otter, aboard the National Oceanic and Atmospheric Administration Ronald H Brown ship, and at ground sites in Gosan and Japan. The results indicate a relatively complicated aerosol mixture of both industrial pollution (including black carbon) and mineral dust. This underscores the need for careful measurements and analysis to separate out the absorption effects of mineral dust and black carbon in the east Asia region.

Bergstrom, R. W.↗