Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIR TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1953

Free fall and evaporation of N-Octane droplets in the atmosphere as applied to the jettisoning of aviation gasoline at altitude

In connection with proposed rapid jettisoning of aviation gasoline at altitude, a theoretical study was made of the free fall and evaporation of N-octane droplets in the atmosphere ; N-octane was selected for study because of the expected similarity of over-all evaporation behavior of N-octane and gasoline. It was concluded that gasoline (or N-octane) droplets larger than 2000 microns in diameter would be unstable ; terminal speeds and Reynolds numbers were obtained for droplets not larger than 2000 microns at altitudes to 11,000 feet. The motion data were used in the calculation of N-octane evaporation rates under various conditions. It was found that a droplet having an original diameter of 2000 microns would fall about 4000 feet from 6000 feet under NACA standard atmosphere conditions before coming virtually to rest. Finally, it was concluded that temperature effects are of paramount importance; at highest air temperatures a 1000-foot ground clearance would probably be adequate to prevent ground contamination, whereas at lowest air temperatures only an atomizing spray arrangement would prevent ground contamination, irrespective of ground clearance.

FIRE HAZARDS↗
NASA NTRS1987

Numerical experiments related to the summer 1980 U.S. heat wave

The NASA Goddard Laboratory for Atmospheres fourth-order GCM was used in a series of medium-range numerical forecast experiments in order to improve understanding of the severe summer 1980 heat wave over the U.S. The results show that the derived soil moisture anomalies in the summer of 1980 contributed positively to the model's simulation of the heat wave maintenance, and suggest that once a region of reduced soil moisture is established, it tends to persist and maintain warmer and drier conditions. The lower soil moisture values resulted in reduced evaporation, higher ground temperatures, increased sensible heat flux from ground to air, higher surface air temperature, lower sea-level pressure, and higher 500-mb height. The effects of North Pacific sea-surface-temperature anomalies were mostly opposite to those of the soil-moisture anomalies: enhanced northerly flow of cooler drier air, increased evaporation, lower ground and air temperature, higher sea level pressure, and lower 500 mb heights over the Great Plains.

Wolfson, N.↗
NASA NTRS2008

Comparison of CERES-MODIS Stratus Cloud Properties with Ground-Based Measurements at the DOE ARM Southern Great Plains Site

Overcast stratus cloud properties derived for the Clouds and the Earth's Radiant Energy system (CERES) Project using Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data are compared with observations taken at the Atmospheric Radiation Measurement (ARM) Southern Great Plains site from March 2000 through December 2004. Retrievals from ARM surface-based data were averaged over a 1-hour interval centered at the time of each satellite overpass, and the CERES-MODIS cloud properties were averaged within a 30-km x 30 km box centered on the ARM SGP site. Two datasets were analyzed: all of the data (ALL) which include multilayered, single-layered, and slightly broken stratus decks and a subset, single-layered unbroken decks (SL). The CERES-MODIS effective cloud heights were determined from effective cloud temperature using a lapse rate method with the surface temperature specified as the 24-h mean surface air temperature. For SL stratus, they are, on average, within the ARM radar-lidar estimated cloud boundaries and are 0.534 +/- 0.542 km and 0.108 +/- 0.480 km lower than the cloud physical tops and centers, respectively, and are comparable for day and night observations. The mean differences and standard deviations are slightly larger for ALL data, but not statistically different to those of SL data. The MODIS-derived effective cloud temperatures are 2.7 +/- 2.4 K less than the surface-observed SL cloud center temperatures with very high correlations (0.86-0.97). Variations in the height differences are mainly caused by uncertainties in the surface air temperatures, lapse rates, and cloud-top height variability. The biases are mainly the result of the differences between effective and physical cloud top, which are governed by cloud liquid water content and viewing zenith angle, and the selected lapse rate, -7.1 K km(exp -1). Based on a total of 43 samples, the means and standard deviations of the differences between the daytime Terra and surface retrievals of effective radius r(sub e), optical depth, and liquid water path for SL stratu are 0.1 +/- 1.9 micrometers (1.2 +/- 23.5%), -1.3 +/- 9.5 (-3.6 +/-26.2%), and 0.6 +/- 49.9 gm (exp -2) (0.3 +/- 27%), respectively, while the corresponding correlation coefficients are 0.44, 0.87, and 0.89. For Aqua, they are 0.2 +/- 1.9 micrometers (2.5 +/- 23.4%), 2.5 +/- 7.8 (7.8 +/- 24.3%), and 28.1 +/- 52.7 gm (exp -2) (17.2 +/- 32.2%), as well as 0.35, 0.96, and 0.93 from a total of 21 cases. The results for ALL cases are comparable. Although a bias in R(sub e) was expected because the satellite retrieval of effective radius only represents the top of the cloud, the surface-based radar retrievals revealed that the vertical profile of r(sub e) is highly variable with smaller droplets occurring at cloud top in some cases. The larger bias in optical depth and liquid water path for Aqua is due, at least partially, to differences in the Terra and Aqua MODIS visible channel calibrations. methods for improving the cloud-top height and microphysical property retrievals are suggested.

Dong, Xiquan↗
NASA NTRS2001

The Extremely Warm Early Winter 2000 in Europe: What is the Forcing

High variability characterizes the winter climate of central Europe: interannual fluctuations in the surface-air temperature as large as 18 C over large areas are fairly common. The extraordinary early-winter 2000 in Europe appears to be a departure to an unprecedented extreme of the existing climate patterns. Such anomalous events affect agriculture, forestry, fuel consumption, etc., and thus deserve in-depth analysis. Our analysis indicates that the high anomalies of the surface-air temperature are predominantly due to the southwesterly flow from the eastern North Atlantic, with a weak contribution by southerly flow from the western Mediterranean. Backward trajectories based on the SSM/I and NCEP Reanalysis datasets traced from west-central Europe indicate that the warm air masses flowing into Europe originate in the southern North Atlantic, where the surface-air temperatures exceed by 15c or more the climatic norms in Europe for late-November or early-December. Because such large ocean-to-continent temperature differences characterize the winter conditions, we refer to this episode which started in late November as occurring in the early winter. In this season, with the sun low over the horizon in Europe, absorption of insolation by the surface has little significance. The effect of cloudiness, a corollary to the low-level maritime-air advection, is a warming by a reduction of heat loss (greenhouse effect). In contrast, in the summer, clouds, by reducing absorption of insolation, produce a cooling, effect at the surface.

Otterman, J.↗
NASA NTRS2004

Potential Predictability of U.S. Summer Climate with "Perfect" Soil Moisture

The potential predictability of surface-air temperature and precipitation over the United States continent was assessed for a GCM forced by observed sea surface temperatures and an estimate of observed ground soil moisture contents. The latter was obtained by substituting the GCM simulated precipitation, which is used to drive the GCM's land-surface component, with observed pentad-mean precipitation at each time step of the model's integration. With this substitution, the simulated soil moisture correlates well with an independent estimate of observed soil moisture in all seasons over the entire US continent. Significant enhancements on the predictability of surface-air temperature and precipitation were found in boreal late spring and summer over the US continent. Anomalous pattern correlations of precipitation and surface-air temperature over the US continent in the June-July-August season averaged for the 1979-2000 period increased from 0.01 and 0.06 for the GCM simulations without precipitation substitution to 0.23 and 0.3 1, respectively, for the simulations with precipitation substitution. Results provide an estimate for the limits of potential predictability if soil moisture variability is to be perfectly predicted. However, this estimate may be model dependent, and needs to be substantiated by other modeling groups.

Yang, Fanglin↗
NASA NTRS1994

NCAR CCM2 simulation of the modern Antarctic climate

The National Center for Atmospheric Research (NCAR) community climate model version 2 (CCM2) simulation of the circumpolar trough, surface air temperature, the polar vortex, cloudiness, winds, and atmospheric moisture and energy budgets are examined to validate the model's representation of the present-day Antarctic climate. The results show that the CCM2 can well simulate many important climate features over Antarctica, such as the location and intensity of the circumpolar trough, the coreless winter over the plateau, the intensity and horizontal distribution of the surface inversion, the speed and streamline pattern of the katabatic winds, the double jet stream feature over the southern Indian and Pacific oceans, and the arid climate over the continent. However, there are also some serious errors in the model. Some are due to old problems but some are caused by the new parameterizations in the model. The model errors over high southern latitudes can be summarized as follows: The circumpolar trough, the polar vertex, and the westerlies in midlatitudes are too strong; the semiannual cycle of the circumpolar trough is distorted compared to the observations; the low centers of the circumpolar trough and the troughs in the middle and upper troposphere are shifted eastward by 15 deg - 40 deg longitude; the surface temperatures are too cold over the plateau in summer and over the coastline in winter; the polar tropopause continues to have a cold bias; and the cloudiness is too high over the continent. These biases are induced by two major factors: (1) the cloud optical properties in tropical and middle latitudes, which cause the eastward shift of troughs and surface low centers and the error in the semiannual cycle, and (2) the cold bias of the surface air temperature, which is attributed to the oversimulation of cloudiness over the continent, especially during summer, and the uniform 2-m-thick sea ice. The constant thickness of sea ice suppresses the energy flux from the ocean to the atmosphere and hence reduces the air temperature near the coast during winter. Finally, although the simulated Antarctic climate still suffers these biases, the overall performance of the CCM2 is much better than that of the CCM1-T42. Therefore the CCM2 is good enough to be used for climate change studies, especially over Antarctica.

Tzeng, Ren-Yow↗
NASA NTRS1993

Fall Freeze-up of Sea Ice in the Beaufort-Chukchi Seas Using ERS-1 SAR and Buoy Data

The lowering of air temperatures below freezing in the fall indicates the end of summer melt and the onset of steady sea ice growth. The thickness and condition of ice that remains at the end of summer has ramifications for the thickness that that ice will attain at the end of the following winter. This period also designates a shifting of key fluxes from upper ocean freshening from ice melt to increased salinity from brine extraction during ice growth. This transitional period has been examined in the Beaufort and Chukchi Seas using ERS-1 SAR imagery and air temperatures from drifting buoys during 1991 and 1992. The SAR imagery is used to examine the condition and types of ice present in this period. Much of the surface melt water has drained off at this time. Air temperatures from drifting buoys coincident in time and within 100 km radius of the SAR imagery have been obtained...

Holt, B.↗
NASA NTRS1995

Comparison between global latent heat flux computed from multisensor (SSM/I and AVHRR) and from in situ data

Comprehensive Ocean-Atmosphere Data Set (COADS) and satellite-derived parameters are input to a similarity theory-based model and treated in completely equivalent ways to compute global latent heat flux (LHF). In order to compute LHF exclusively from satellite measurements, an empirical relationship (Q-W relationship) is used to compute the air mixing ratio from Special Sensor Microwave/Imager (SSM/I) precipitable water W and a new one is derived to compute the air temperature also from retrieved W(T-W relationship). First analyses indicate that in situ and satellite LHF computations compare within 40%, but systematic errors increase the differences up to 100% in some regions. By investigating more closely the origin of the discrepancies, the spatial sampling of ship reports has been found to be an important source of error in the observed differences. When the number of in situ data records increases (more than 20 per month), the agreement is about 50 W/sq m rms (40 W/sq m rms for multiyear averages). Limitations of both empirical relationships and W retrieval errors strongly affect the LHF computation. Systematic LHF overestimation occurs in strong subsidence regions and LHF underestimation occurs within surface convergence zones and over oceanic upwelling areas. The analysis of time series of the different parameters in these regions confirms that systematic LHF discrepancies are negatively correlated with the differences between COADS and satellite-derived values of the air mixing ratio and air temperature. To reduce the systematic differences in satellite-derived LHF, a preliminary ship-satellite blending procedure has been developed for the air mixing ratio and air temperature.

Jourdan, Didier↗
NASA NTRSDate not supplied

Global Surface Skin Temperature Monitoring from Satellites

Surface skin temperature has been retrieved from IASI measurements. Monthly and spatially gridded surface skin temperature is produced to show some phenomena of its natural variability, which is also reflected in the surface emissivity and/or soil moisture derived from the same time series of measurements. The anomalies of surface skin temperature are used to estimate its trend. Error estimation and/or evaluation has been performed and discussed to understand the uncertainty in the trends. The trend of IASI global surface skin temperature is compared with that of NASA GISS global surface air temperature. Despite the physical differences between surface skin and air temperatures, agreement is shown between these two datasets indicating consistency and global surface warming during the past 15 years. The trend of IASI global surface skin temperature reports a positive increase has evolved during 2007–2022. This warming trend is more pronounced in the northern hemisphere. Retrieving, analyzing, and monitoring surface parameters from such advanced hyperspectral infrared sounders will continue.

global warming↗
NASA NTRSDate not supplied

Synergy of Satellite Radiation, Precipitation, and Other Meteorological Variable Observations for Global Mean Sea Surface Turbulent Heat Flux Estimation

Sea surface turbulent heat flux is one of the key components in global freshwater and energy balances and plays an important role in atmospheric dynamics, thermodynamics and general circulation. This turbulent heat flux is dominantly decided by sea surface latent heat release with some contribution from sensible heat exchange. The flux and its anomaly could significantly affect ocean heat storage and ocean circulation. They are part of and have great impacts on climate variability. Though the turbulent heat flux is extremely important for the climate and weather systems, only very limited ship and buoy observations of the flux are available over open oceans. There are no global, operational, direct measurements of this crucial meteorological variable. Global estimates are, basically, indirectly calculated from bulk turbulent flux parameterization with a combination of satellite column water vapor, sea surface water temperature, and wind speed observations. Critical parameters such as sea surface air temperature and humidity are estimated from empirical relations of theses variables with the water vapor and sea surface water temperature, respectively. Lacking accurate knowledge on surface air temperature and humidity, uncertainties in the parameterization and potential changes in the non-linear turbulent processes with long-term climate variations could cause large errors in estimated long-term turbulent fluxes from the indirect method as shown in current global sea surface turbulent flux datasets. This study uses synergized data of satellite global radiation, precipitation, and other meteorological variable observations to estimate sea surface turbulent heat fluxes. The radiation observations are made by the satellite Clouds and the Earth’s Radiant Energy System (CERES) sensors, while the global precipitation data is from NASA’s satellite Global Precipitation Climatology Project (GPCP). Other data includes satellite sea surface water temperature and wind speed observations. These datasets are obtained from a wide range of space sensors from passive to active instruments and from visible and near infrared to thermal infrared and microwave spectral sounders. One significant feature of these datasets is that they have multi-decades long climate records. Top-of-atmosphere (TOA) radiation and its anomaly represents the net heat energy input to the climate system, and the oceanic precipitation and ocean-land moisture transport can be used to quantify sea surface latent heat release. Based on the synergized datasets and the principle of global water and energy balances, global mean turbulent heat fluxes are estimated. The turbulent heat anomalies for the first two decades of the 21st century are, then, obtained mainly from global CERES radiation and GPCP precipitation anomalies, along with CERES derived ocean-land heat transports. Analysis indicates that the uncertainties in the estimated turbulent flux anomalies may be reduced considerably. The results suggest a strong needs in synchronized and synergized observations of atmospheric radiation, precipitation, and oceanic meteorological variables for long-term climate studies.

Bing Lin↗
NASA NTRS2000

Extreme Winter/Early-Spring Temperature Anomalies in Central Europe

Extreme seasonal fluctuations of the surface-air temperature characterize the climate of central Europe, 45-60 deg North Temperature difference between warm 1990 and cold 1996 in the January-March period, persisting for more than two weeks at a time, amounted to 18 C for extensive areas. These anomalies in the surface-air temperature stem in the first place from differences in the low level flow from the eastern North-Atlantic: the value of the Index 1na of southwesterlies over the eastern North-Atlantic was 8.0 m/s in February 1990, but only 2.6 m/ s in February 1996. The primary forcing by warm advection to positive anomalies in monthly mean surface temperature produced strong synoptic-scale uplift at the 700 mb level over some regions in Europe. The strong uplift contributed in 1990 to a much larger cloud-cover over central Europe, which reduced heat-loss to space (greenhouse effect). Thus, spring arrived earlier than usual in 1990, but later than usual in 1996.

Otterman, Joseph↗
NASA NTRS1973

Effect of water injection on nitric oxide emissions of a gas turbine combustor burning natural gas fuel

The effect of direct water injection on the exhaust gas emissions of a turbojet combustor burning natural gas fuel was investigated. The results are compared with the results from similar tests using ASTM Jet-A fuel. Increasing water injection decreased the emissions of oxides of nitrogen (NOX) and increased the emissions of carbon monoxide and unburned hydrocarbons. The greatest percentage decrease in NOX with increasing water injection was at the lowest inlet-air temperature tested. The effect of increasing inlet-air temperature was to decrease the effect of the water injection. The reduction in NOX due to water injection was almost identical to the results obtained with Jet-A fuel. However, the emission indices of unburned hydrocarbons, carbon monoxide, and percentage nitric oxide in NOX were not.

Marchionna, N. R.↗
NASA NTRS1980

Sea ice simulations based on fields generated by the GLAS GCM

The GLAS General Circulation Model (GCM) was applied to the four-month simulation of the thermodynamic part of the Parkinson-Washington sea ice model using atmospheric boundary conditions. The sea ice thickness and distribution were predicted for the Jan. 1-Apr. 30 period using the GCM-fields of solar and infrared radiation, specific humidity and air temperature at the surface, and snow accumulation; the sensible heat and evaporative surface fluxes were consistent with the ground temperatures produced by the ice model and the air temperatures determined by the atmospheric concept. It was concluded that the Parkinson-Washington sea ice model results in acceptable ice concentrations and thicknesses when used with GLAS GCM for the Jan.-Apr. period suggesting the feasibility of fully coupled ice-atmosphere simulations with these two approaches.

Parkinson, C. L.↗
NASA NTRS1952

Internal-liquid-film-cooling Experiments with Air-stream Temperatures to 2000 Degrees F. in 2- and 4-inch-diameter Horizontal Tubes

Report presents the results of an investigation conducted to determine the effectiveness of liquid-cooling films on the inner surfaces of tubes containing flowing hot air. Experiments were made in 2- and 4-inch-diameter straight metal tubes with air flows at temperatures from 600 degrees to 2000 degrees F. and diameter Reynolds numbers from 2.2 to 14 x 10(5). The film coolant, water, was injected around the circumference at a single axial position on the tubes at flow rates from 0.02 to .24 pound per second per foot of tube circumference (0.8 to 12 percent of the air flow). Liquid-coolant films were established and maintained around and along the tube wall in concurrent flow with the hot air. The results indicated that, in order to film cool a given surface area with as little coolant flow as possible, it may be necessary to limit the flow of coolant introduced at a single axial position and to introduce it at several axial positions. The flow rate of inert coolant required to maintain liquid-film cooling over a given area of tube surface can be estimated when the gas-flow conditions are known by means of a generalized plot of the film-cooling data.

Kinney, George R↗
NASA NTRS1997

A Microwave Technique for Mapping Ice Temperature in the Arctic Seasonal Sea Ice Zone

A technique for deriving ice temperature in the Arctic seasonal sea ice zone from passive microwave radiances has been developed. The algorithm operates on brightness temperatures derived from the Special Sensor Microwave/Imager (SSM/I) and uses ice concentration and type from a previously developed thin ice algorithm to estimate the surface emissivity. Comparisons of the microwave derived temperatures with estimates derived from infrared imagery of the Bering Strait yield a correlation coefficient of 0.93 and an RMS difference of 2.1 K when coastal and cloud contaminated pixels are removed. SSM/I temperatures were also compared with a time series of air temperature observations from Gambell on St. Lawrence Island and from Point Barrow, AK weather stations. These comparisons indicate that the relationship between the air temperature and the ice temperature depends on ice type.

St.Germain, Karen M.↗
NASA NTRS1949

Vibration and icing investigation of CAA type V-109 very-high-frequency aircraft antenna

Vibration and icing determinations on a CAA type V-109 very-high-frequency aircraft antenna were conducted in the NACA Lewis icing research tunnel. The antenna is an omnidirectional-range unit that consists of two aluminum elements mounted in a streamline plastic head forming a V in plan view with an apex angle of 80°. Vibration determinations during a nonicing experiment produced element-tip total amplitude of approximately 1/4 inch at a tunnel-air velocity of 300 miles per hour. During the icing investigation, a total amplitude as great as 7 inches was observed at the antenna-element tips with tunnel-air velocities greater than 160 miles per hour and a tunnel-air temperature of 20° F. At the higher tunnel-air temperatures, which produced a heavier and more severe ice accretion, the damping effect of the ice reduced the element-tip amplitudes over the entire range of tunnel-air velocities to a maximum of 1/4 inch at a tunnel-air velocity of 300 miles per hour.

William H Gowan, Jr↗
NASA NTRS1976

Experimental evaluation of two premixing-prevaporizing fuel injection concepts for a gas turbine catalytic combustor

A premixing-prevaporizing fuel system to be used with a catalytic combustor was evaluated for possible application in an automotive gas turbine. Spatial fuel distribution and degree of vaporization were measured using jet A fuel. Two types of air blast injectors were tested, a splash groove injector and a multiple jet cross stream injector. Air swirlers with vane angles of 15 deg and 30 deg were used to improve the spatial fuel distribution in a 12 cm diameter tubular rig. Distribution and vaporization measurements were made 35.5 cm downstream of the injector. The spatial fuel distribution was nearly uniform with the multiple jet contrastream injector and the splash-groove injector with a 30 deg air swirler. The vaporization was nearly 100 percent at an inlet air temperature of 600 K, and at 800 K inlet air temperature fuel oxidation reactions were observed. The total pressure loss was less than 0.5 percent of the total pressure for the multiple jet cross stream injector and the splash groove injector (without air swirler) and less than 1 percent for the splash groove with a 30 deg air swirler.

Tacina, R.↗
NASA NTRS1981

Heat Capacity Mapping Mission (HCMM): Interpretation of imagery over Canada

Visual analysis of HCMM images acquired over two sites in Canada and supporting aircraft and ground data obtained at a smaller subsite in Alberta show that nightime surface temperature distribution is primarily related to the near-surface air temperature; the effects of topography, wind, and land cover were low or indirect through air temperature. Surface cover and large altitudinal differences were important parameters influencing daytime apparent temperature values. A quantitative analysis of the relationship between the antecedent precipitation index and the satellite thermal IR measurements did not yield statistically significant correlation coefficients, but the correlations had a definite temporal trend which could be related to the increasing uniformity of vegetation cover. The large pixel size (resulting in a mixture of cover types and soil/canopy temperatures measured by the satellite) and high cloud cover frequency found in images covering both Canadian sites and northern U.S. were considered the main deficiencies of the thermal satellite data.

Cihlar, J.↗