Search NASA⌕ Search

SEARCH · Search NASA

Results for “Active interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

The Cosmic-Ray and Gas Content of the Cygnus Region as Measured in Gamma Rays by the Fermi Large Area Telescope

Context. The Cygnus region hosts a giant molecular-cloud complex which actively forms massive stars. Interactions of cosmic rays with interstellar gas and radiation fields make it shine at y-ray energies. Several gamma-ray pulsars and other energetic sources are seen in this direction. Aims. In this paper we analyse the gamma-ray emission measured by the Fermi Large Area Telescope in the energy range from 100 Me V to 100 Ge V in order to probe the gas and cosmic-ray content over the scale of the whole Cygnus complex. The gamma-ray emission on the scale of the central massive stellar clusters and from individual sources is addressed elsewhere. Methods. The signal from bright pulsars is largely reduced by selecting photons in their off-pulse phase intervals. We compare the diffuse gamma-ray emission with interstellar gas maps derived from radio/mm-wave lines and visual extinction data. and a global model of the region, including other pulsars and gamma-ray sources, is sought. Results. The integral H I emissivity above 100 MeV averaged over the whole Cygnus complex amounts to 12.06 +/- 0.11 (stat.) (+0.15 -0.84) (syst.J] x 10(exp -26) photons /s / sr / H-atom, where the systematic error is dominated by the uncertainty on the H I opacity to calculate its column densities. The integral emissivity and its spectral energy distribution are both consistent within the systematics with LAT measurements in the interstellar space near the solar system. The average X(sub co) N(H2)/W(sub co) ratio is found to be [1.68 +/- 0.05 (stat.) (H I opacity)] x 1020 molecules cm-2 (K km/s /r, consistent with other LAT measurements in the Local Arm. We detect significant gamma-ray emission from dark neutral gas for a mass corresponding to approx 40% of that traced by CO. The total interstellar mass in the Cygnus complex inferred from its gamma-ray emission amounts to 8(+5 -1) x 10(exp 6) Solar M at a distance of 1.4 kpc. Conclusions. Despite the conspicuous star formation activity and large masses of the interstellar clouds, the cosmic-ray population in the Cygnus complex averaged over a few hundred parsecs is similar to that of the local interstellar space.

Ackermann, M.↗
NASA NTRS1987

On the association of erupting magnetic fields with eruptive prominences and coronal mass ejections

A number of space and ground-based observations give evidence that the eruptive prominences, coronal mass ejections (CMEs) and associated shocks are generated by a common cause, i.e., the eruption of the magnetic field on the Sun. Some 60% of the observed CMEs are associated with the eruptive prominences. It is believed that in reality a much better correlation should be between these events because of observational limitations and of the effect of partial eruption. Some recent results on the formation and evolution of the quiescent and the active region prominences give an idea on the early phase of eruption of the magnetic field with the prominence plasma frozen in. In the latter phase of eruption the magnetic field lifted high into the corona and is seen (as manifested by the cold plasma frozen in) as a system of huge loops - evidently the result of some reconnections at lower heights. The legs of these erupting loops interact sometimes with the local magnetic field, i.e., it often appears to be an active region. In consequence of this interaction the activation of prominences and generation of flares can take place on some occasions as well as ejection of surges and sprays.

Rompolt, Bogdan↗
NASA NTRS1994

The development and validation of command schedules for SeaWiFS

An automated method for developing and assessing spacecraft and instrument command schedules is presented for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) project. SeaWiFS is to be carried on the polar-orbiting SeaStar satellite in 1995. The primary goal of the SeaWiFS mission is to provide global ocean chlorophyll concentrations every four days by employing onboard recorders and a twice-a-day data downlink schedule. Global Area Coverage (GAC) data with about 4.5 km resolution will be used to produce the global coverage. Higher resolution (1.1 km resolution) Local Area Coverage (LAC) data will also be recorded to calibrate the sensor. In addition, LAC will be continuously transmitted from the satellite and received by High Resolution Picture Transmission (HRPT) stations. The methods used to generate commands for SeaWiFS employ numerous hierarchical checks as a means of maximizing coverage of the Earth's surface and fulfilling the LAC data requirements. The software code is modularized and written in Fortran with constructs to mirror the pre-defined mission rules. The overall method is specifically developed for low orbit Earth-observing satellites with finite onboard recording capabilities and regularly scheduled data downlinks. Two software packages using the Interactive Data Language (IDL) for graphically displaying and verifying the resultant command decisions are presented. Displays can be generated which show portions of the Earth viewed by the sensor and spacecraft sub-orbital locations during onboard calibration activities. An IDL-based interactive method of selecting and testing LAC targets and calibration activities for command generation is also discussed.

Woodward, Robert H.↗
NASA NTRS1972

Revisions to V/STOL handling qualities criteria of AGARD report 408

A brief review of selected handling qualities criteria for V/STOL aircraft shows that although a clearer understanding of the requirements for controversial areas such as roll control power, vertical flight path control, and transition is in hand, considerably more research is needed to refine these criteria for operational IFR activity. Because many items interact to influence the pilots' overall impression of the aircraft's behaviour, additional work of a systematic nature must be done to clarify this aspect. A better definition of a gust model which includes discrete gust effects is needed to firm up criteria for both hover and STOL operation.

Anderson, S. B.↗
NASA NTRS1978

An overview of dredging operations in the Chesapeake Bay

Maintenance of the Baltimore and the Newport News/Norfolk harbors as well as of the Chesapeake and Delaware Canal is accomplished by different dredging operations which depend on the amount and type of material to be moved, water depth, and location of disposal sites. Methods for determining the physical or chemical-biological interactive effects of these activities on the environment and on the shellfish and finfish industries on the Bay are discussed. The types of dredges used are classed according to their mode of operation.

Silver, R. H.↗
NASA NTRS1979

Proceedings of summary and recommendations session

Discussion by discipline scientist and information users throughout the Workshop showed the diversity of opinion on the actual use of soil moisture information and the approaches which may lead to successful remote sensing measurements of soil moisture. Soil moisture has varying definitions and information needs depending on perspective of discipline and defined use. With these differences of need and definition, the summary panel provides summaries of the activities and recommendations with interaction from all participants of the Workshop.

Source record↗
NASA NTRS1979

Solar-Terrestrial Predictions Proceedings. Volume 2: Working Group Reports and Reviews

Accurate models are needed to support research in the following areas: spacecraft charging, radiation dosage, transionospheric radio propagation, long and short term solar activity, magnetospheric disturbances, ionospheric interactions, solar weather/climate effects, and geomagnetic applications such as electric power transmission and oil and gas pipeline problems.

Richard F Donnelly↗
NASA NTRS1988

Implications of privacy needs and interpersonal distancing mechanisms for space station design

Isolation, confinement, and the characteristics of microgravity will accentuate the need for privacy in the proposed NASA space station, yet limit the mechanism available for achieving it. This study proposes a quantitative model for understanding privacy, interpersonal distancing, and performance, and discusses the practical implications for Space Station design. A review of the relevant literature provided the basis for a database, definitions of physical and psychological distancing, loneliness, and crowding, and a quantitative model of situational privacy. The model defines situational privacy (the match between environment and task), and focuses on interpersonal contact along visual, auditory, olfactory, and tactile dimensions. It involves summing across pairs of crew members, contact dimensions, and time, yet also permits separate analyses of subsets of crew members and contact dimensions. The study concludes that performance will benefit when the type and level of contact afforded by the environment align with that required by the task. The key to achieving this is to design a flexible, definable, and redefinable interior environment that provides occupants with a wide array of options to meet their needs for solitude, limited social interaction, and open group activity. The report presents 49 recommendations in five categories to promote a wide range of privacy options despite the space station's volumetric limitations.

Harrison, Albert A.↗
NASA NTRS1987

Definition of tolerance to continuous hyperoxia in man - An abstract report of Predictive Studies V

The overall goals, design, and procedures of Predictive Studies V are discussed as well as the specific elements of neural effects produced by prolonged hyperoxia. It is noted that Predictive Studies V study of oxygen poisoning in normal men during uninterrupted exposures to oxygen over the range of hyperbaric oxygen exposure most useful in diving, the treatment of gas lesion diseases, and general hyperbaric medicine. It is found that, throughout the study, the most striking observations were related to effects on visual function, on the lung, and the probable interactions of preconvulsive neural activity with effects on cardiovascular and respiratory-pulmonary functions.

Lambertsen, C. J.↗
NASA NTRS1989

The benefits and costs of automation in advanced helicopters - An empirical study

A helicopter simulation was conducted to examine the interaction between voice-activated controls and altitude-hold automation. A single-pilot scout/attack helicopter with conventional controls was simulated with full out-the-window computer-generated imagery. Helicopter pilots performed simulated missions which included hover, cruise and ground attack phases. For half of the flights, voice-activated controls were used instead of manual controls, for two flight tasks (weapon selection and data-burst transmission). Hover performance during data-burst hover improved when voice-activation was used. However, subjective ratings indicated higher workload levels with voice-activation. An altitude-hold automation manipulation was crossed with the voice-activation/manual manipulation. Altitude-hold automation provided two significant benefits: (1) pilots were able to hover with less lateral movement; and (2) pilots reported less workload. However, there was a performance cost associated with the automation. Pilots were significantly slower in responding to unexpected events during hover.

Bortolussi, Michael R.↗
NASA NTRS1991

The Pilot Land Data System (PLDS) at the Ames Research Center manages aircraft data in collaboration with an ecosystem research project

The Pilot Land Data System (PLDS) is a data and information system serving NASA-supported investigators in the land science community. The three nodes of the PLDS, one each at the Ames Research Center (ARC), the Goddard Space Flight Center (GSFC) and the Jet Propulsion Laboratory (JPL), cooperate in providing consistent information describing the various data holding in the hardware and software (accessible via network and modem) that provide information about and access to PLDS-held data, which is available for distribution. A major new activity of the PLDS node at the Ames Research Center involves the interaction of the PLDS with an active NASA ecosystem science project, the Oregon Transect Ecosystems Research involves the management of, access to, and distribution of the large volume of widely-varying aircraft data collected by OTTER. The OTTER project, is managed by researchers at the Ames Research Center and Oregon State University. Its principal objective is to estimate major fluxes of carbon, nitrogen, and water of forest ecosystems using an ecosystem process model driven by remote sensing data. Ten researchers at NASA centers and universities are analyzing data for six sites along a temperature-moisture gradient across the western half of central Oregon (called the Oregon Transect). Sensors mounted on six different aircraft have acquired data over the Oregon Transect in support of the OTTER project.

Angelici, Gary↗
NASA NTRS1990

Evolving technologies for Space Station Freedom computer-based workstations

Viewgraphs on evolving technologies for Space Station Freedom computer-based workstations are presented. The human-computer computer software environment modules are described. The following topics are addressed: command and control workstation concept; cupola workstation concept; Japanese experiment module RMS workstation concept; remote devices controlled from workstations; orbital maneuvering vehicle free flyer; remote manipulator system; Japanese experiment module exposed facility; Japanese experiment module small fine arm; flight telerobotic servicer; human-computer interaction; and workstation/robotics related activities.

Jensen, Dean G.↗
NASA NTRS1993

A comparison of the visible and near infrared reflectance of hydrovolcanic palagonite tuffs and Martian weathered soils

The visible and near infrared reflectance of Martian weathered soils, abundant in the bright regions, have been shown to resemble certain examples of the X-ray amorphous mineraloid palagonite. To date, most comparisons between terrestrial palagonites and Martian telescopic spectra have been done using palagonites that were formed under ambient semi-arid weathering conditions on Hawaiian volcanoes such as Mauna Kea. Here we examine palagonites associated with the tephra deposits that make up tuff rings and tuff cones. Tuff rings and tuff cones result from hydrovolcanic activity, defined as the interaction of magmas (in this instance, of basaltic composition) with surface or near-surface water. Tuff rings and tuff cones can contain variable amounts of country rock and juvenile crystals, but their primary constituent is fine grained sideromelane (basaltic glass). Sideromelane alters to palagonite. Unlike the aforementioned Hawaiian palagonites, the alteration of sideromelane to palagonite seems to occur relatively rapidly in tuff cones, on the order of days to months. In comparing the spectra of hydrovolcanically produced palagonites with telescopic spectra of Mars, one is struck by their similarity in the VNIR and dissimilarity in the SWIR.

Farrand, W. H.↗
NASA NTRS1994

Computer-aided operations engineering with integrated models of systems and operations

CONFIG 3 is a prototype software tool that supports integrated conceptual design evaluation from early in the product life cycle, by supporting isolated or integrated modeling, simulation, and analysis of the function, structure, behavior, failures and operation of system designs. Integration and reuse of models is supported in an object-oriented environment providing capabilities for graph analysis and discrete event simulation. Integration is supported among diverse modeling approaches (component view, configuration or flow path view, and procedure view) and diverse simulation and analysis approaches. Support is provided for integrated engineering in diverse design domains, including mechanical and electro-mechanical systems, distributed computer systems, and chemical processing and transport systems. CONFIG supports abstracted qualitative and symbolic modeling, for early conceptual design. System models are component structure models with operating modes, with embedded time-related behavior models. CONFIG supports failure modeling and modeling of state or configuration changes that result in dynamic changes in dependencies among components. Operations and procedure models are activity structure models that interact with system models. CONFIG is designed to support evaluation of system operability, diagnosability and fault tolerance, and analysis of the development of system effects of problems over time, including faults, failures, and procedural or environmental difficulties.

Malin, Jane T.↗
NASA NTRS1995

Intermediate Levels of Autonomy within the SSM/PMAD Breadboard

The Space Station Module Power Management and Distribution (SSM/PMAD) bread-board is a test bed for the development of advanced power system control and automation. Software control in the SSM/PMAD breadboard is through co-operating systems, called Autonomous Agents. Agents can be a mixture of algorithmic software and expert systems. The early SSM/PMAD system was envisioned as being completely autonomous. It soon became apparent, though, that there would always be a need for human intervention, at least as long as a human interacts with the system in any way. In a system designed only for autonomous operation, manual intervention meant taking full control of the whole system, and loosing whatever expertise was in the system. Several methods for allowing humans to interact at an appropriate level of control were developed. This paper examines some of these intermediate modes of autonomy. The least humanly intrusive mode is simple monitoring. The ability to modify future behavior by altering a schedule involves high-level interaction. Modification of operating activities comes next. The coarsest mode of control is individual, unplanned operation of individual Power System components. Each of these levels is integrated into the SSM/PMAD breadboard, with support for the user (such as warnings of the consequences of control decisions) at every level.

Dugal-Whitehead, Norma R.↗
NASA NTRS1997

Physical Structure of Four Symbiotic Binaries

Disk accretion powers many astronomical objects, including pre-main sequence stars, interacting binary systems, and active galactic nuclei. Unfortunately, models developed to explain the behavior of disks and their surroundings - boundary layers, jets, and winds - lack much predictive power, because the physical mechanism driving disk evolution - the viscosity - is not understood. Observations of many types of accreting systems are needed to constrain the basic physics of disks and provide input for improved models. Symbiotic stars are an attractive laboratory for studying physical phenomena associated with disk accretion. These long period binaries (P(sub orb) approx. 2-3 yr) contain an evolved red giant star, a hot companion, and an ionized nebula. The secondary star usually is a white dwarf accreting material from the wind of its red giant companion. A good example of this type of symbiotic is BF Cygni: our analysis shows that disk accretion powers the nuclear burning shell of the hot white dwarf and also manages to eject material perpendicular to the orbital plane (Mikolajewska, Kenyon, and Mikolajewski 1989). The hot components in other symbiotic binaries appear powered by tidal overflow from a very evolved red giant companion. We recently completed a study of CI Cygni and demonstrated that the accreting secondary is a solar-type main sequence star, rather than a white dwarf (Kenyon et aL 1991). This project continued our study of symbiotic binary systems. Our general plan was to combine archival ultraviolet and optical spectrophotometry with high quality optical radial velocity observations to determine the variation of line and continuum sources as functions of orbital phase. We were very successful in generating orbital solutions and phasing UV+optical spectra for five systems: AG Dra, V443 Her, RW Hya, AG Peg, and AX Per. Summaries of our main results for these systems appear below. A second goal of our project was to consider general models for the outbursts of symbiotic stars, with an emphasis on understanding the differences between disk-driven and nuclear-powered eruptions.

Kenyon, Scott J.↗
NASA NTRS2000

Salient Characteristics for Terrestrial Analog Engineering Test Sites

The use of terrestrial analog sites is an essential component of the development process for systems that are planned for lunar and planetary surfaces. These sites can also be valuable for training personnel who are expected to operate those systems. The fact that the site is an integral element, capable of influencing data and impacting test results, must not be overlooked. For tests performed in analog environments to be truly valid it is essential that the relevant characteristics of the employed sites be thoroughly understood. It is also critical that a comparative evaluation be made to assess the similarity of the analog sites to target planetary sites. Examples of relevant characteristics include terrain, soil properties, meteorology, geologic features, biological history, and remoteness. The importance of each of the characteristics varies with the type of extraterrestrial activity to be conducted. As a result, a site that is ideal for one purpose may be totally inadequate for another. It may also be appropriate to utilize multiple sites of increasing fidelity as the development process evolves. For example, early in the development process, the use of lower-fidelity sites may be elected - especially if they are available for a lower cost. Later, it may be necessary to employ higher-fidelity sites to capture greater realism, even if there is an associated increased cost. Finally, when interpreting the results of field tests, it is necessary to understand the sensitivity of the results to the relevant conditions. Knowledge of characteristics and sensitivity of results is particularly important when using field test results to validate analytical model predictions. This is especially true for activities that involve physical interaction with the site. Examples would include tests of rovers or other vehicles and associated trafficability modeling, spacesuit mobility tests, and tests associated with system deployment operations.

Watson, J.K.↗