Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Boundary Layer Structures Over the Northwest Atlantic Derived From Airborne High Spectral Resolution Lidar and Dropsonde Measurements During the ACTIVATE Campaign

The Planetary Boundary Layer height (PBLH) is essential for studying PBL and ocean-atmosphere interactions. Marine PBL is usually defined to include a mixed layer (ML) and a capping inversion layer. The ML height (MLH) estimated from the measurements of aerosol backscatter by a lidar was usually compared with PBLH determined from radiosondes/dropsondes in the past, as the PBLH is usually similar to MLH in nature. However, PBLH can be much greater than MLH for decoupled PBL. Here, in this study, we evaluate the retrieved MLH from an airborne lidar (HSRL-2) by utilizing 506 co-located dropsondes during the ACTIVATE field campaign over the Northwest Atlantic from 2020 to 2022. First, we define and determine the MLH and PBLH from the temperature and humidity profiles of each dropsonde, and find that the MLH values from HSRL-2 and dropsondes agree well with each other, with a coefficient of determination of 0.66 and median difference of 18 m. In contrast, the HSRL-2 MLH data do not correspond to dropsonde-derived PBLH, with a median difference of -47 m. Therefore, we modify the current operational and automated HSRL-2 wavelet-based algorithm for PBLH retrieval, decreasing the median difference significantly to -8 m. Further data analysis indicates that these conclusions remain the same for cases with higher or lower cloud fractions, and for decoupled PBLs. These results demonstrate the potential of using HSRL-2 aerosol backscatter data to estimate both marine MLH and PBLH and suggest that lidar-derived MLH should be compared with radiosonde/dropsonde-determined MLH (not PBLH) in general.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Is There a Scalar Atmospheric Surface Layer Within a Convective Boundary Layer? Implications for Flux Measurements

Top‐down entrainment shapes the vertical gradients of sensible heat, latent heat, and CO 2 fluxes, influencing the interpretation of eddy covariance (EC) measurements in the unstable atmospheric surface layer (ASL). Using large eddy simulations for convective boundary layer flows, we demonstrate that decreased temperature gradients across the entrainment zone increase entrainment fluxes by enhancing the entrainment velocity, amplifying the asymmetry between top‐down and bottom‐up flux contributions. These changes alter scalar flux profiles, causing flux divergence or convergence and leading to the breakdown of the constant flux layer assumption (CFLA) in the ASL. As a result, EC‐measured fluxes either underestimate or overestimate “true” surface fluxes during divergence or convergence phases, contributing to energy balance non‐closure. The varying degrees of the CFLA breakdown are a fundamental cause for the non‐closure issue. These findings highlight the underappreciated role of entrainment in interpreting EC fluxes, addressing non‐closure, and understanding site‐to‐site variability in flux measurements.

eddy covariance fluxes of scalars↗
DOE OSTI2026

Deep Convection‐Driven Downward Transport of Trace Gases and Aerosols From the Free Troposphere to the Boundary Layer

Deep convective clouds regulate Earth's energy and moisture budgets, yet their impact on the atmospheric boundary layer (BL) composition remains underexplored. Using long-term observations from three mid-latitude sites, we show that deep convection (DC) consistently enhances nighttime surface ozone and is often accompanied by modest increases in ultrafine particle concentrations. Within the BL, the condensational growth of these transported ultrafine particles may contribute up to 60% of total cloud condensation nuclei (CCN). Mass flux calculations suggest that short-lived convective cores (∼30 min) account for ∼2% of total vertical air mass transport relative to steady entrainment, increasing to ∼13% when the trailing stratiform regions are included. These results show that DC provides an episodic but efficient pathway linking the free troposphere and BL, influencing oxidant budgets, CCN variability, and climate forcing. Accurately representing this process in climate models may help reduce uncertainties in climate projections, under both preindustrial and present-day conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Pivotal Role of Cloud‐Planetary Boundary Layer Coupling to Explain Contrasting Aerosol‐Cloud Relationships

The radiative effect of aerosol on cloud albedo via altering cloud droplet effective radius (r e ) is a major uncertainty in the Earth's climate system. Remote sensing studies have reported either negative or positive relationships between re and aerosol number concentration (N a ) or other aerosol proxies. However, there are much fewer in situ observational evidences and physical explanation remains elusive for the contrasting N a -r e relationships. Here we quantify the N a -r e relationship by using in situ aircraft measurements, together with a re decomposition method. Our analysis reveals that the cloud-planetary boundary layer (PBL) coupling plays a pivotal role on the N a -r e relationship. Quantitative r e decomposition indicates that the contrasting N a -r e relationships in two cloud-PBL coupling regimes result from different balances of four distinct aspects. The widely recognized number effect may be outweighed by the joint effects of the remaining three that have been rarely investigated and largely ignored in N a -r e parameterizations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Outer Radiation Belt Dynamics During the October 2012 Storm Revisited: Rapid Inward Radial Transport From a Dynamic Outer Boundary

Earth's outer radiation belt electron flux is highly variable and can be enhanced by over an order of magnitude over timescales less than one day, as observed during the October 2012 storm. Previous studies of this storm (e.g., Reeves et al., 2013, https://doi.org/10.1126/science.1237743) have invoked local acceleration to explain this. However, here, we argue that the observations can instead be explained by fast inward radial transport. One method often invoked to distinguish between these two acceleration processes is the existence of local peaks in electron phase space density (PSD) as a function of L* at fixed first, M, and second, K, adiabatic invariants. However, this method relies on the assumption that the evolution of the PSD as a function of L* occurs over timescales slower than the satellite orbital period. Here, high spatiotemporal resolution data from the Global Positioning System (GPS) spacecraft constellation is used to show that enhancements in the PSD occur during the October 2012 storm over short timescales not resolvable by the Van Allen Probes. In addition, Geostationary Operational Environmental Satellite spacecraft data also indicate that these enhancements are consistent with relativistic electron injections. A radial diffusion model is shown to reproduce the PSD dynamics observed by the Van Allen Probes, once rapid variations at the simulation outer boundary are included, consistent with GPS data. This verifies that apparently “locally growing” peaks in PSD along high apogee satellite orbits can be produced by fast inward radial transport without requiring the action of any local acceleration processes.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Environmental Controls on Water Vapor Deuterium Excess in the Coastal Boundary Layer: An Information Theory Perspective

We use information theory to quantify the environmental controls on water vapor deuterium excess (D-excess) in coastal Southern California from June 2023 through February 2024. Using Shannon entropy, mutual information (MI), and joint mutual information, metrics that capture both linear and nonlinear relationships, we identify the most informative variables and variable combinations governing D-excess across contrasting marine and continental regimes. Relative humidity with respect to sea surface temperature (RHS) is consistently the strongest individual predictor, explaining up to 27% of D-excess variability during marine conditions but only 10% in continental air masses. The Relative humidity(RHS) + sea surface temperature (SST) combination demonstrates synergistic effects, where their joint influence (explaining up to 36% of D-excess variability) exceeds what either variable achieves individually, confirming their coupled influence on deuterium excess. Wind direction complements RHS most effectively during continental conditions. The best three-variable combination (RHS + SST + Planetary Boundary Layer height) explains 38% of D-excess variability in marine air, while no combination exceeds 20% explanatory power during continental periods. Information theory shows that heteroscedasticity in D-excess relationships indicates regime shifts in controlling processes and quantifies fundamental constraints on predictor variables: some environmental factors like surface pressure or water vapor flux contain insufficient information content to explain D-excess variability regardless of their physical relevance. These results highlight the different predictability limits between marine and continental regimes, challenging the adequacy of linear models and providing a rigorous framework for quantifying the information content of isotope-climate relationships with implications for both modern and paleoclimate applications.

information theory↗
DOE OSTI2026

A Boundary Element Model for Assessing Large‐Scale Pressurization in Faulted Geological Storage Systems

Assessing large-scale pressurization at the regional scale—a possible outcome of large subsurface storage applications such as wastewater injection and geological carbon sequestration—presents significant computational challenges. These challenges are particularly pronounced when accounting for complex geologic structures with multiple reservoir and caprock layers, fault zones, and wells. This study introduces a computationally efficient model that integrates single-phase semi-analytical solutions with a boundary element (BE) approach. The model simulates pressure propagation in multilayered 3D systems, including vertical faults, caprock, basement, and confining units. We apply this new model to a representative scenario involving CO 2 injection near a partially sealing fault with verification against an independent two-phase flow model. Results demonstrate that our model accurately captures far-field pressure responses and that, outside the CO 2 plume zone, pressure predictions from single-phase and two-phase models are nearly identical. This supports the use of single-phase models like ours for efficient estimation of far-field pressure changes. Additionally, we demonstrate its effectiveness at a large scale, incorporating multiple wells and faults. With its ability to represent multiple wells, fault zones, and geological heterogeneity, our model is well suited for assessments of basin-scale pressurization. Its computational efficiency also makes it a promising tool for integration with optimization frameworks aimed at designing and managing injection strategies in faulted storage systems.

Cihan, A. [Lawrence Berkeley National Laboratory (↗
DOE OSTI2025

Molecular dynamics study of grain boundaries as defect sinks under irradiation in LiAlO 2 and LiAl 5 O 8

Lithium aluminate ceramics, LiAlO 2 and LiAl 5 O 8 , show promise in nuclear environments due to their excellent radiation tolerance. Molecular dynamics simulations investigate grain boundaries (GB) and their role in defect evolution. Results reveal that GBs act as efficient defect sinks, with Li and Al atoms exhibiting distinct behaviors during displacement cascades. Tritium migration in LiAlO 2 is also studied, showing rapid diffusion and stable configurations with oxygen, corroborated by ab initio simulations from the literature. The calculated tritium diffusion coefficient of 1.33 × 10 - ¹⁴ m²/s aligns with the literature, validating the model. LiAl 5 O 8 demonstrates superior defect healing compared to LiAlO 2 , attributed to enhanced atomic transfer between grains and GBs. These findings reveal key insights into defect dynamics, providing essential insights for their application in tritium-producing burnable absorber rods (TPBARs).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Grain Boundary Effects on Radiation Damage and Tritium Diffusion in Li–Al–O Ceramics from Molecular Dynamics and Experiments

Understanding irradiation damage and tritium transport in LiAlO2 ceramics is essential for their deployment in tritium-producing burnable absorber rods (TPBARs). Grain boundaries (GBs) play an important role in governing radiation response and tritium transport in LiAlO2 and its secondary phase LiAl5O8. Using molecular dynamics simulations, we investigated defect evolution and tritium diffusion during displacement cascades in single-crystal and bicrystal LiAlO2 and LiAl5O8 at 600 K. The results reveal that GBs suppress the damage in the LiAlO2 bicrystals as compared to single crystals, via interstitial emission. The effect is more pronounced for Li defects, than for Al and O. In LiAl5O8 the damage reduction due to introduction of GB is less pronounced overall. Tritium diffusion coefficients at GBs are higher by factors of 2–10 relative to diffusion inside grain bulk. The effect is particularly pronounced in LiAlO2, where S5, S17, and S25 GBs promote rapid tritium transport, whereas LiAl5O8 exhibits slower diffusion due to reduced free volume at its GBs. These findings evince a trade-off that while GBs mitigate radiation damage by absorbing interstitials, they simultaneously provide fast pathways for tritium migration which is not desirable for TPBAR application. The mechanistic insights gained here establish a foundation for microstructural design strategies to balance radiation tolerance and tritium retention in ceramic breeder materials.

Roy, Ankit↗
DOE OSTI2025

Grain boundary zirconia-modified garnet solid-state electrolyte

Here, we report a method for promoting electrochemical stability in garnet Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-state electrolyte based on a composite two-phase oxide–oxide microstructure. Grain boundary precipitation of the controlled distribution of amorphous zirconium oxide microparticles is achieved through the addition of reactive tantalum carbide. During ambient-atmosphere sintering, the carbide decomposes through an in situ reaction, the ‘extra’ Ta substituting for Zr within the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 lattice. Density functional theory (DFT) calculations identify a thermodynamically favourable reaction path and show how substituting Ta 5+ at Zr 4+ sites affects the crystal structure as well as bulk ionic and electronic conductivities. Quantitative stereology highlights that zirconia also acts as a sintering aid, reducing compact porosity. Cryogenic focused-ion-beam scanning electron microscopy and fractography analysis of cycled solid-state electrolytes illustrates that near-universally observed intergranular Li-metal dendrite propagation is suppressed by the two-phase microstructure, favouring transgranular dendrites instead. Importantly, DFT demonstrates that compared with the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 surface, the zirconium oxide surface per se is less electronically conductive and does not trap excess electrons to reduce Li ions. This is a key reason for the substantial improvement in the electrochemical properties over the single-phase baseline.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Spatially distributed atmospheric boundary layer properties in Houston – A value-added observational dataset

Abstract In 2022, Houston, TX became a nexus for field campaigns aiming to further our understanding of the feedbacks between convective clouds, aerosols and atmospheric boundary layer (ABL) properties. Houston’s proximity to the Gulf of Mexico and Galveston Bay motivated the collection of spatially distributed observations to disentangle coastal and urban processes. This paper presents a value-added ABL dataset derived from observations collected by eight research teams over 46 days between 2 June - 18 September 2022. The dataset spans 14 sites distributed within a ~80-km radius around Houston. Measurements from three types of instruments are analyzed to objectively provide estimates of nine ABL parameters, both thermodynamic (potential temperature, and relative humidity profiles and thermodynamic ABL depth) and dynamic (horizontal wind speed and direction, mean vertical velocity, updraft and downdraft speed profiles, and dynamical ABL depth). Contextual information about cloud occurrence is also provided. The dataset is prepared on a uniform time-height grid of 1 h and 30 m resolution to facilitate its use as a benchmark for forthcoming numerical simulations and the fundamental study of atmospheric processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Redrawing facility boundaries to promote industrial water reuse

US industrial sector water management traditionally overlooks high-value treated water reuse opportunities. Here, to reshape the narrative around industrial water reuse, water-related process boundaries should be expanded to include all water sources and sinks and focus on opportunities for on-site circularity.

Sharma, Naushita [Oak Ridge National Laboratory (O↗
DOE OSTI2024

Towards a self-consistent model of the convective core boundary in upper main sequence stars: I. 2.5D and 3D simulations

There is strong observational evidence that the convective cores of intermediate-mass and massive main sequence stars are substantially larger than those predicted by standard stellar-evolution models. However, it is unclear what physical processes cause this phenomenon or how to predict the extent and stratification of stellar convective boundary layers. Convective penetration is a thermal-timescale process that is likely to be particularly relevant during the slow evolution on the main sequence. We use our low-Mach-number S EVEN -L EAGUE H YDRO code to study this process in 2.5D and 3D geometries. Starting with a chemically homogeneous model of a 15 M ⊙ zero-age main sequence star, we construct a series of simulations with the luminosity increased and opacity decreased by the same factor, ranging from 10 3 to 10 6 . After reaching thermal equilibrium, all of our models show a clear penetration layer; its thickness becomes statistically constant in time and it is shown to converge upon grid refinement. The penetration layer becomes nearly adiabatic with a steep transition to a radiative stratification in simulations at the lower end of our luminosity range. This structure corresponds to the adiabatic ‘step overshoot’ model often employed in stellar-evolution calculations. The simulations with the highest and lowest luminosity differ by less than a factor of two in the penetration distance. The high computational cost of 3D simulations makes our current 3D data set rather sparse. Depending on how we extrapolate the 3D data to the actual luminosity of the initial stellar model, we obtain penetration distances ranging from 0.09 to 0.44 pressure scale heights, which is broadly compatible with observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Quantification and assessment of the atmospheric boundary layer height measured during the AWAKEN experiment by a scanning LiDAR

The atmospheric boundary layer (ABL) height plays a key role in many atmospheric processes as one of the dominant flow length scales. However, a systematic quantification of the ABL height over the entire range of scales (i.e., with periods ranging from one minute to one year) is still lacking in literature. In this work, the ABL height is quantified based on high-resolution measurements collected by a scanning pulsed Doppler LiDAR during the recent American WAKE experimeNt (AWAKEN) campaign. The high availability of ABL height estimates (≈2200 collected over one year and each of them based on 10-min averaged statistics) allows to robustly assess five different ABL height models, i.e., one for convective thermal conditions and four for stable conditions. Thermal condition is quantified by a stability parameter spanning three orders of magnitude and probed by near-ground 3D sonic anemometry. The free-atmosphere stability, quantified by the Brunt–Väisälä frequency, is both calculated from simultaneous radiosonde measurements and obtained from the best fit of two of the chosen ABL height models. Good agreement is found between the data and three of the chosen models, quantified by mean absolute errors on the ABL height between 281 and 585 m. Furthermore, the seasonal variability of the convective ABL height model parameters (−15% to +23% with respect to the year baseline) agrees with the variability of buoyancy-generated turbulence caused by the variation in solar radiation throughout the year.

17 WIND ENERGY↗
DOE OSTI2024

Probing the atmospheric boundary layer with integrated remote-sensing platforms during the American WAKE ExperimeNt (AWAKEN) campaign

The American WAKE ExperimeNt (AWAKEN) collaboration is an observational-based field campaign in northern Oklahoma intended to analyze the potential influence of onshore wind farms and their collective wakes on wind power production, turbine structural loads, and on the atmospheric boundary layer (ABL). Focusing on the ABL effects, the University of Oklahoma and the Lawrence Livermore National Laboratory collected continuous high-resolution kinematic and thermodynamic profile measurements during 2022 and Summer 2023. The deployment strategy for these campaigns is detailed first, followed by an initial comparison of data from two sites in the AWAKEN domain: a near-farm site to examine collective wake impacts on the ABL, and a far-field site remaining outside the wind farm-waked region. Here, we summarize the datasets available and demonstrate the benefits of these observations and multiple value-added products (VAPs) for investigation of ABL features observed during AWAKEN. We also highlight examples of preliminary analyses, including ABL height detection and nocturnal low-level jet examination, which are produced using novel VAPs based on optimal estimation to retrieve deeper Doppler lidar wind profiles than previously resolved, along with their uncertainty. By including the near-farm and far-field site in these analyses, we identified a pattern of stronger lower-atmospheric mixing at the near-farm site than the far-field site, motivating deeper investigation into the relationship between wind farms and general ABL characteristics. Future analysis will delve deeper into this relationship by examining other ABL characteristics, such as atmospheric stability and convection.

17 WIND ENERGY↗
DOE OSTI2025

Verification of the Shafranov shift in free-boundary VMEC, DESC, and SPEC calculations with elliptical geometry

Here, given a set of current-carrying filaments that create a magnetic field with rotating elliptical flux surfaces, we present verification calculations using the VMEC, DESC, and SPEC free-boundary magnetohydrostatic equilibrium codes for both the “vacuum” equilibrium, for which there is no plasma pressure and no plasma currents, and for a non-zero pressure, zero toroidal current equilibrium. For the vacuum case, these codes are quantitatively compared to the magnetic field produced by the coils. For the non-zero pressure case, they are compared to each other. As the stepped pressure profile used in SPEC approaches the continuous profile used in VMEC and DESC, the SPEC magnetic axis approaches the VMEC and DESC axes. To within an error given by the difference between the pressure profiles, the VMEC, DESC, and SPEC calculations give the same pressure-induced geometric shift of the magnetic axis, known as the Shafranov shift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Experimental shock Hugoniot and melt boundary temperatures of aluminum

Aluminum is a ubiquitous component in dynamic compression, pulsed power, and other high energy density physics studies. Its high-pressure behavior and phase diagram are extensively studied standards in shockwave physics. While theoretical calculations and multiphase equations of state have been benchmarked to velocity measurements of loading and unloading waves, pressure and density under shock, and other mechanical data, experimental temperature data under these conditions have not been reported. We conducted a series of experiments shocking and releasing aluminum 6061 and 1100 samples into lithium fluoride windows. We measured temperature at the sample–window interface under steady compression and subsequent isentropic release. These results allow us to constrain the temperature of the solid Hugoniot and the boundary between the liquid and face-centered cubic solid phases.

Hartsfield, Thomas Murray [Sandia National Laborat↗