Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER - EFFECT OF COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1967

Mechanics of Boundary Layer Transition. Part 5: Boundary Layer Stability theory in incompressible and compressible flow

The fundamentals of stability theory, its chief results, and the physical mechanisms at work are presented. The stability theory of the laminar boundary determines whether a small disturbance introduced into the boundary layer will amplify or damp. If the disturbance damps, the boundary layer remains laminar. If the disturbance amplifies, and by a sufficient amount, then transition to turbulence eventually takes place. The stability theory establishes those states of the boundary layer which are most likely to lead to transition, identifys those frequencies which are the most dangerous, and indicates how the external parameters can best be changed to avoid transition.

Mack, L. M.↗
NASA NTRS1990

Dynamics of the outgoing turbulent boundary layer in a Mach 5 unswept compression ramp interaction

Wall pressure fluctuations have been measured under the unsteady separation shock and on the ramp face in an unswept Mach 5 compression ramp interaction. The freestream Reynolds number was 51.0 x 10 to the 6th/m, and the incoming turbulent boundary layer developed on the tunnel floor under approximately adiabatic wall temperature conditions. Standard data-acquisition methods, as well as real-time and posttest conditional sampling techniques were used. The results show that the mean and rms pressure levels are strong functions of separation shock position. At all stations on the ramp, from the corner to where the pressure reaches the theoretical inviscid value, the pressure signals have two dominant components: a low frequency component characteristic of the global unsteadiness, which correlates with the separation shock motion, and a higher frequency component associated with turbulence. The former is the major contributor to the overall signal variance.

Gramann, Richard A.↗
DOE OSTI2026

Simulations of a hypersonic turbulent boundary layer over wavy surfaces

Here, we conduct large-eddy simulations of a Mach 5.84 cold wall turbulent boundary layer over one-dimensional wavy walls with varying amplitudes and wavelengths. Across all wall topologies, a series of alternating shock and expansion waves is shown to influence the entire boundary layer, and generate repeating wave patterns in the turbulent stresses, dispersive stresses, and turbulent kinetic energy budget. The series of alternating shocks and expansions imposes repeating adverse and favourable pressure gradients across the wavy wall, and at sufficient wall amplitude, triggers flow separation in the trough of the wave. Flow separation is demonstrated to influence the behaviour of wall pressure fluctuations over the wavy wall. In attached flows, the prominent frequencies are consistent with integral-scale boundary layer turbulence, whereas in separated flows, a two-decade frequency range is present, akin to two-dimensional shock–boundary layer interactions. Counter-rotating streamwise-oriented structures are observed on the windward side of the wave, which diminish over the wave crest. A conditional analysis demonstrates that these structures are present in the upstream boundary layer, and are amplified with increasing wall amplitude. An examination of the Görtler number and probability density function (PDF) of the fluctuating lateral wall shear stress demonstrates the strong correlation between a large Görtler number and growth of the PDF tail density, suggesting that the amplification of the counter-rotating streamwise-oriented structures are linked to centrifugal instabilities in regions of streamline concavity.

boundary layers↗
NASA NTRS1973

Theoretical and experimental internal flow characteristics of a 13.97-centimeter-diameter inlet at STOL takeoff and approach conditions

The theoretical and experimental internal flow characteristics of a 13.97-cm-diam inlet with centerbody retracted and extended are presented at STOL takeoff and approach operating conditions. The theoretical results were obtained from incompressible potential flow corrected for compressibility and boundary layer. Comparisons between theoretical internal surface static-pressure distributions and experimental data are presented for free-stream velocities of 0, 24, 32, and 45 m/sec for a range of inlet incidence angles from 0 to 50 deg. Surface static-pressure distributions are illustrated at circumferential locations of 0, 60, 120, and 180 deg. Surface Mach number distributions from the stagnation point to the diffuser exit are presented along with turbulent boundary-layer shape factors. In general, good agreement was found between the theoretical and experimental surface static pressure distributions.

Albers, J. A.↗
NASA NTRS1973

Minimizing boundary layer bleed for a mixed compression inlet

An experimental investigation of a full scale mixed compression inlet sized for the TF30-P-3 turbofan engine was conducted at Mach 2.5 and 2.0 operating conditions. The two cone axisymmetric inlet had minimum internal contraction consistent with high total pressure recovery and low cowl drag. At Mach 2.5, inlet recovery exceeded 0.90 with only 0.02 centerbody bleed mass-flow ratio and zero cowl bleed. A centerbody bleed of approximately 0.05 gave a maximum inlet unstart angle-of-attack of 6.85 deg. Inlet performance and angle-of-attack tolerance is presented for operation at Mach 2.5 and 2.0.

Wasserbauer, J. F.↗
NASA NTRS1973

Minimizing boundary layer bleed for a mixed compression inlet

An experimental investigation of a full scale mixed compression inlet sized for the TF30-P-3 turbofan engine was conducted at Mach 2.5 and 2.0 operating conditions. The two cone axisymmetric inlet had minimum internal contraction consistent with high total pressure recovery and low cowl drag. At Mach 2.5, inlet recovery exceeded 0.90 with only 0.02 centerbody bleed mass-flow ratio and zero cowl bleed. A centerbody bleed of approximately 0.05 gave a maximum inlet unstart angle-of-attack of 6.85 deg. Inlet performance and angle-of-attack tolerance is presented for operation at Mach 2.5 and 2.0.

Wasserbauer, J. F.↗
NASA NTRS1975

Solution of the three-dimensional compressible, laminar, and turbulent boundary-layer equations with comparisons to experimental data

A technique for solving three-dimensional boundary-layer flows is presented. The governing equations are transformed to obtain a nondimensional form and a similarity-type transform is defined for the normal coordinate and velocity. The resulting equation is solved in an iterative mode using a finite difference technique suggested by Dwyer (1968). A simple mean field turbulence model is discussed and numerical data obtained in a test case are compared with experimental data.-

Harris, J. E.↗
NASA NTRS1975

On the calculation of supersonic, separating, and reattaching flows

A method is developed for solving the laminar and turbulent compressible boundary-layer equations for separating and reattaching flows. Results of this method are compared with experimental data for two laminar and three turbulent boundary-layer, shock-wave interactions. Several Navier-Stokes solutions were obtained for each of the laminar boundary-layer, shock-wave interactions considered. Comparison of these solutions indicates a first-order sensitivity in C sub f to the computational mesh selected in both the viscous and inviscid portions of the flow.

Murphy, J. D.↗
NASA NTRS1977

Equations and closure methods

Basic differential equations governing compressible turbulent boundary layer flow are reviewed, including conservation of mass and energy, momentum equations derived from Navier-Stokes equations, and equations of state. Closure procedures were broken down into: (1) simple or zeroth-order methods, (2) first-order or mean field closure methods, and (3) second-order or mean turbulence field methods.

Source record↗
NASA NTRS1979

Measurement of turbulent fluctuations in high-speed flows using hot wires and hot films

The paper examines the dynamic calibrations of the hot film and modified hot-wire probes with a view to assess their suitability for use in experiments for the measurement of turbulent fluctuations in compressible boundary-layer flows. Results are presented of tests on some sensors in both subsonic and supersonic boundary-layer flows. A simple technique is presented for determining dynamic calibration correction factors for the sensitivities involved.

Acharya, M.↗
NASA NTRS1979

Evaluation of the time dependent surface shear stress in turbulent flows

The time dependent surface shear stress has been evaluated using surface heat transfer measurements. For fully developed turbulent pipe and open channel water flows, and incompressible and compressible turbulent boundary layer air flows the measurements indicate the absolute magnitude of the surface shear stress fluctuations will be greater than two times the mean values. The root-mean-square shear stress fluctuations were of the order of 0.2 to 0.4 times the mean surface shear values. Due to these large surface shear stress fluctuations and the nonlinear relation between heat transfer and shear stress, a special technique has been developed to evaluate the measurements. It was found that the non-linear averaging errors for a hot film-surface shear stress gauge in a fully developed pipe flow was of the order of 10 percent at low velocities. A hot wire-surface shear stress gauge was employed for measurements of turbulent boundary layers in air.

Sandborn, V. A.↗
NASA NTRS1988

A documentation of two- and three-dimensional shock-separated turbulent boundary layers

A shock-related separation of a turbulent boundary layer has been studied and documented. The flow was that of an axisymmetric turbulent boundary layer over a 5.02-cm-diam cylinder that was aligned with the wind tunnel axis. The boundary layer was compressed by a 30 deg half-angle conical flare, with the cone axis inclined at an angle alpha to the cylinder axis. Nominal test conditions were P sub tau equals 1.7 atm and M sub infinity equals 2.85. Measurements were confined to the upper-symmetry, phi equals 0 deg, plane. Data are presented for the cases of alpha equal to 0. 5. and 10 deg and include mean surface pressures, streamwise and normal mean velocities, kinematic turbulent stresses and kinetic energies, as well as reverse-flow intermittencies. All data are given in tabular form; pressures, streamwise velocities, turbulent shear stresses, and kinetic energies are also presented graphically.

Brown, J. D.↗
NASA NTRS1990

Accurate calculation and instability of supersonic wake flows

This study is concerned with the computation and linear stability of a class of laminar compressible wake flows. The emphasis is on correct basic flow profiles that satisfy the steady equations of motion, and to this end the unperturbed state is obtained through numerical integration of the compressible boundary-layer equations. The linear stability of the flow is examined via the Rayleigh equation that describes evolution of inviscid disturbances. Analytical results are given for short- and long-wavelength disturbances and some numerical results of the general eigenvalue problem are also reported.

Papageorgiou, Demetrius T.↗
NASA NTRS2016

Acoustic Radiation From a Mach 14 Turbulent Boundary Layer

Direct numerical simulations (DNS) are used to examine the turbulence statistics and the radiation field generated by a high-speed turbulent boundary layer with a nominal freestream Mach number of 14 and wall temperature of 0:18 times the recovery temperature. The flow conditions fall within the range of nozzle exit conditions of the Arnold Engineering Development Center (AEDC) Hypervelocity Tunnel No. 9 facility. The streamwise domain size is approximately 200 times the boundary-layer thickness at the inlet, with a useful range of Reynolds number corresponding to Re 450 􀀀 650. Consistent with previous studies of turbulent boundary layer at high Mach numbers, the weak compressibility hypothesis for turbulent boundary layers remains applicable under this flow condition and the computational results confirm the validity of both the van Driest transformation and Morkovin's scaling. The Reynolds analogy is valid at the surface; the RMS of fluctuations in the surface pressure, wall shear stress, and heat flux is 24%, 53%, and 67% of the surface mean, respectively. The magnitude and dominant frequency of pressure fluctuations are found to vary dramatically within the inner layer (z/delta 0.< or approx. 0.08 or z+ < or approx. 50). The peak of the pre-multiplied frequency spectrum of the pressure fluctuation is f(delta)/U(sub infinity) approx. 2.1 at the surface and shifts to a lower frequency of f(delta)/U(sub infinity) approx. 0.7 in the free stream where the pressure signal is predominantly acoustic. The dominant frequency of the pressure spectrum shows a significant dependence on the freestream Mach number both at the wall and in the free stream.

Zhang, Chao↗
NASA NTRS1982

Compression of magnetic field in a viscous boundary layer

A simple analytical illustration is provided to complement the extensive numerical results already published regarding the compression of the magnetic field that occurs when the closed convective circulation of a viscous fluid with small resistivity breaks up a broad magnetic field into isolated filaments and proceeds to compress those filaments to field strengths beyond equipartition with the convective motions. This compression may occur in the solar corona or in interstellar space but not within the sun.

Parker, E. N.↗