Search NASA⌕ Search

SEARCH · Search NASA

Results for “Base Composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Design and strategy for next-generation silicon carbide composites for nuclear energy

Silicon carbide (SiC) ceramic-based composites continue to be attractive material options for fusion in-vessel components and fission reactor core structures because of their exceptional high-temperature capability and favorable neutronic properties. As performance data accumulates, the limitations of the current generation of nuclear-grade SiC composites are becoming more apparent. These limitations mainly involve strength degradation during high-dose neutron irradiation. In this paper, we discuss several options for improving the performance of the next generation of SiC composites to enhance the radiation resistance, along with new experimental results on neutron irradiation resistance. The main emphasis is on the selection of the fibers and the design and development of alternative interphase layers for advanced composites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

Tribological performance of Al2O3-B2O3 composites: Role of CuOand CaO constituents

Al2O3-B2O3 based composites for wear resistant applications (e.g., seal rings and bearings) were manufactured using powder metallurgy route. Four different compositions were considered to control amount of in situ phases, mainly aluminum borate, formed during sintering. The fabricated composites were characterized using X-ray diffraction to identify the phases. Hardness was measured in terms of micro-hardness. The tribological performance of the composites were evaluated by conducting dry sliding tests against alumina balls at different humidity levels (10 – 95% relative humidity). The X-ray spectrum revealed that increase in B2O3 content in the composites increased the amount of aluminum borate phase that enhanced the micro-hardness. Results revealed that aluminum borate enhanced the wear resistance of the composites, whereas the humidity-sensitive alumina phase reduced friction at higher humidity levels. Furthermore, CuO and CaO (2-5 wt.%) were added separately to the composite, resulting in increased density by 22-48 %. Athough the addition of CuO and CaO led to increase in hardness and wear resistance of the composites, the coefficient of friction was negatively affected. The friction and wear performance along with wear mechanism are discussed with respect to observed phases in the composites.

Ashish K. Kasar↗
NASA NTRS2007

Ceramic Integration Technologies for Aerospace and Energy Systems: Technical Challenges and Opportunities

Ceramic integration technology has been recognized as an enabling technology for the implementation of advanced ceramic systems in a number of high-temperature applications in aerospace, power generation, nuclear, chemical, and electronic industries. Various ceramic integration technologies (joining, brazing, attachments, repair, etc.) play a role in fabrication and manufacturing of large and complex shaped parts of various functionalities. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Experimental results for bonding and integration of SiC based LDI fuel injector, high conductivity C/C composite based heat rejection system, solid oxide fuel cells system, ultra high temperature ceramics for leading edges, and ceramic composites for thermostructural applications will be presented. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be discussed.

Singh, Mrityunjay↗
NASA NTRS1998

Affordable Fabrication and Properties of Silicon Carbide-Based Interpenetrating Phase Composites

An affordable processing technique for the fabrication of silicon carbide-based interpenetrating phase composites (IPCs) is presented. This process consists of the production of microporous carbon preforms and subsequent infiltration with liquid silicon or silicon-refractory metal alloys. The microporous preforms are made by the pyrolysis of a polymerized resin mixture for which methods to control pore volume and pore size have been established. The process gives good control of microstructure and morphology of silicon carbide-based composite materials. Room and high temperature mechanical properties (flexural strength, compressive strength, and flexural creep) of low and high silicon-silicon carbide composites will be discussed.

Singh, Mrityunjay↗
NASA NTRS1984

The unique planetary nebula NGC 2818

The planetary nebula NGC 2818, or PK 261 + 8 deg 1, is of special interest due to its apparent association with a Population I open cluster (of the same designation). The results of new observations of the nebula are presented, including interference-filter imagery, photoelectric photometry, and ground-based and IUE spectroscopy. Analysis of its composition based on new IUE and ground-based spectroscopy and model calculations of the very similar planetary nebula NGC 2440 suggests that NGC 2818 is a prototype of the He-rich and N-rich Type I group. Compared to the composition of H II regions in the solar neighborhood, He is 60 percent overabundant, C is 0.3 dex lower, N is 1.0 dex higher, and O, Ne, Si, Cl, and Ar are essentially at comparable values. Analysis of kinematical and morphological data suggests that the nebula is probably associated with the star cluster (revised distance = 3.5 kpc). If so, then it is of exceptional size (radius approximately 1.1 pc), mass (greater than or equal to 0.6 solar mass), expansion velocity (52 + or - 3 km/s), and age (possibly as old as 22,000 yr). Some implications of the results regarding the masses of planetary-nebula progenitors, the nucleosynthesis processes in stars of intermediate mass, and the formation of planetary nebulae are also discussed.

Dufour, R. J.↗
DOE OSTI2020

PdAu/YSZ composite hydrogen separation membranes with enhanced stability in the presence of CO

The effects of gold composition on the tolerance of palladium-based composite membranes to CO exposure was studied under the presence of high CO concentrations. Membranes with PdAu compositions ranging up to 41% by mass were exposed to binary 50/50 H 2 /CO gas atmospheres and both hydrogen flux and purity were monitored over time. It was observed that the highest gold composition (41%) suffered no degradation in membrane performance in terms of permeate hydrogen purity and hydrogen permeation flux during the 48 h exposure. Furthermore, for lower gold compositions, X-ray diffraction patterns suggested that carbon entered the film and could be removed by exposure to a non-CO containing gas mixture over time. However, removal of the carbon adversely affected purity; interestingly, some of the purity decline could be reversed upon re-exposure to the CO gas mixture. It is hypothesized that carbon loading in the palladium films causes lattice expansion and may even fill pore defects, thus lowering leaks through the Pd films. Furthermore, this study suggests that a membrane exposed to a CO mixture should not be cycled between CO and non-CO environments, but rather run continuously for best performance. Additionally, the choice of Pd-alloy and metal composition should be considered in regard to its carbon solubility to best predict lifetime performance.

08 HYDROGEN↗
NASA NTRS1974

Skylab experiments on metals

The Skylab Materials Processing Facility is described. Eight experiments on metal processing under near-zero-gravity conditions were performed in this facility. Three of these involved metals and procedures of potential application to fabrication in space. A Multipurpose electric furnace within the Materials Processing Facility was employed to heat three ampoules of samples for each of the other five experiments. These five investigations cover diffusion versus convection rates in molten zinc, several immiscible alloy compositions, a whisker-reinforced silver-based composite, heat treating of porous silver samples, and a copper-aluminum eutectic.

Lundquist, C. A.↗
NASA NTRS1990

Improving processing and toughness of a high performance composite matrix through an interpenetrating polymer network. VI

The use of a semiinterpenetrating polymer network (SIPN) of the high-performance polyimide NR-150B2 to reduce brittleness and improve processability in the highly crosslinked acetylene-terminated polyimides Thermid LR-600, AL-600, MC-600, and FA-700 is described. The theoretical basis of the SIPN process is reviewed; the preparation and characterization of the neat SIPN resins and unidirectional graphite-fiber composites are explained; and the results are presented in extensive tables, graphs, and micrographs and discussed in detail. Significant increases in fracture energy were observed with SIPN, from 93 J/sq m for unmodified LR-600 to 283-603 J/sq m for the SIPN materials; the room-temperature flexural strength of the unidirectional composites also increased, from 1344 MPa for an unmodified MC-600 composite to 2020-1751 MPa for the SIPN composites. The potential applicability of SIPN-based composites to aerospace structures and electronic components is indicated.

Pater, Ruth H.↗
DOE OSTI2022

Advances in metal–organic framework-based hydrogel materials: preparation, properties and applications

Although metal–organic frameworks (MOFs) with intriguing physiochemical properties have recently attracted increasing attention of researchers, MOFs have not adequately achieved various applications due to their instability and unsatisfactory processability. Hence, MOF-based composites as well as structurally novel MOFs have been established to solve this challenge. Recently, some efforts have been made for the development of MOF-based hydrogels. They exhibit excellent properties compared to initial MOFs in many ways (e.g., mechanical strength, absorption capacity and total pore volume). In this review, the up-to-date research progress of MOF-based hydrogels will be briefly summarized. Here, we mainly focus on expounding the classification of MOF-based hydrogels and their related synergistic effects. As to details, we will provide a conspectus of laconic and latest approaches for the synthesis of MOF-based hydrogels, focusing on composite systems, mechanism research, and stability. In addition, the applications of MOF-based hydrogels have been widely discussed, particularly in the environmental, energy and medical aspects. It is hoped that the detailed description of this review can help researchers working on MOF-based hydrogels to develop more novel composite materials and investigate their wider application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Lower Cost 3D Composite Additive Manufacturing

The purpose of the project was to find a lower cost carbon fiber material solution that would lower end use part cost produced with the Impossible Objects’ 3D Composite Based Additive Manufacturing (CBAM) technology. The two strands of the research were to consider lower cost carbon tow material provided by Oak Ridge National Lab (ORNL) and carbon fiber nonwoven veils containing a soluble binder.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Space environmental effects on polymer composites: Research needs and opportunities

The long-term performance of polymer-based composites in the space environment is discussed. Both thermoset and thermoplastic matrix composites are included in this discussion. Previous efforts on the space environmental effects on composites are briefly reviewed. Focus of this review is placed on the effects of hygrothermal stresses, atomic oxygen, ultraviolet (UV), and space debris/micrometeoroid impacts along with the potential synergism. Potential approaches to estimating the residual strength of polymer composites after exposure to atomic oxygen erosion or space debris/micrometeoroid impact are evaluated. New ground-based data are then utilized to illustrate the effects of atomic oxygen and thermal cycling on the failure behavior of polymer composites. Finally, research needs, challenges, and opportunities in the field of space environmental effects on composite materials are highlighted.

Jang, Bor Z.↗
NASA NTRS1999

Syntrophus aciditrophicus sp. nov., a new anaerobic bacterium that degrades fatty acids and benzoate in syntrophic association with hydrogen-using microorganisms

Strain SBT is a new, strictly anaerobic, gram-negative, nonmotile, non-sporeforming, rod-shaped bacterium that degrades benzoate and certain fatty acids in syntrophic association with hydrogen/formate-using microorganisms. Strain SBT produced approximately 3 mol of acetate and 0.6 mol of methane per mol of benzoate in coculture with Methanospirillum hungatei strain JF1. Saturated fatty acids, some unsaturated fatty acids, and methyl esters of butyrate and hexanoate also supported growth of strain SBT in coculture with Desulfovibrio strain G11. Strain SBT grew in pure culture with crotonate, producing acetate, butyrate, caproate, and hydrogen. The molar growth yield was 17 +/- 1 g cell dry mass per mol of crotonate. Strain SBT did not grow with fumarate, iron(III), polysulfide, or oxyanions of sulfur or nitrogen as electron acceptors with benzoate as the electron donor. The DNA base composition of strain SBT was 43.1 mol% G+C. Analysis of the 16 S rRNA gene sequence placed strain SBT in the delta-subdivision of the Proteobacteria, with sulfate-reducing bacteria. Strain SBT was most closely related to members of the genus Syntrophus. The clear phenotypic and genotypic differences between strain SBT and the two described species in the genus Syntrophus justify the formation of a new species, Syntrophus aciditrophicus.

Non-NASA Center↗
NASA NTRS2001

Development of Tough, Strong, and Pest-Resistant MoSi2-(Beta)Si3N4 Composites for High-Temperature Structural Applications

A new MoSi2-base composite was developed that contains in-situ reinforcement of whisker-type beta-Si3N4 grains in a MoSi2 matrix. The advantages of this in-situ reinforced MoSi2-Si3N4 are lower density, higher fracture toughness and better strength than typical MoSi2 alloys, combined with excellent environmental and pest resistance. The average fracture toughness of the in-situ reinforced material determined by one technique was 12.2 MPa.m(exp 1/2) compared to 4.9 to 5.5 MPa.m(exp 1/2) for similar materials with the exception that the beta-Si3N4 had a blocky morphology as opposed to the whisker-like morphology typical of the in-situ toughened material. This MoSi2-(beta)Si3N4 was also resistant to pesting at intermediate temperatures (400 to 600 C) even when precracked or under applied load; conditions that would quickly reduce typical MoSi2 alloys to oxidized powder.

Hebsur, M. G.↗
DOE OSTI2020

Mechanically tunable elastomer and cellulose nanocrystal composites as scaffolds for in vitro cell studies

Considering the range of properties that various materials offer for tissue engineering it has come clear that no one size fits all, as no one material can be fully effective for all types of cell and ensuing tissues. Scaffolds need to address the delicate balance between cell-scaffold interactions and the particular requirements of different cell types. To address the specific needs for the controlled growth of tissues it is imperative to match scaffold stiffness and elasticity to cells and tissues of interest to promote regeneration success. We here report an efficient method for creating scaffolds of tunable elasticity by generating a range of composites based on ε-caprolactone-D,L-lactide-based elastomer with cellulose nanocrystals (CNC). Two specific composites with different Young's modulus (E) values (~5 MPa and ~15 MPa) were selected and fully evaluated by tensile tests, Fourier Transform-Infrared (FT-IR), Scanning Electron Microscopy (SEM), contact angle measurements, and X-ray scattering. As a proof of concept this work studies how matching the scaffold's mechanical properties to neuroblastomas and fibroblasts cells affects cell behavior. Specifically, the composite with lower E, by design with less CNC content, is more suitable for neuroblastomas, whereas the one with higher E via higher CNC content is more suited for human dermal fibroblasts. The approach of matching cells with appropriate mechanical environments can provide important insights into fundamental cell behaviors.

36 MATERIALS SCIENCE↗
NASA NTRS1958

Survey of Hydrogen Combustion Properties

This literature digest of hydrogen-air combustion fundamentals presents data on flame temperature, burning velocity, quenching distance, flammability limits, ignition energy, flame stability, detonation, spontaneous ignition, and explosion limits. The data are assessed, recommended values are given, and relations among various combustion properties are discussed. New material presented includes: theoretical treatment of variation in spontaneous ignition lag with temperature, pressure, and composition, based on reaction kinetics of hydrogen-air composition range for 0.01 to 100 atmospheres and initial temperatures of 0 degrees to 1400 degrees k.

Drell, Isadore L↗
NASA NTRS1986

Prediction of the long-term creep compliance of general composite laminates

An accelerated viscoelastic characterization procedure for use with polymer-based composite materials is presented which employs short term test data obtained using unidirectional specimens to predict the long term viscoelastic behavior of general composite laminates. This procedure is here illustrated using the Schapery (1966, 1969) nonlinear theory as the required viscoelastic constitutive model, as well as classical lamination theory for the lamination scheme. The technique is applied to T300/5208 graphite/epoxy.

Tuttle, M. E.↗