Search NASA⌕ Search

SEARCH · Search NASA

Results for “Battery Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Lithium Redistribution in Lithium-Metal Batteries

A model of a lithium-metal battery with a CoO2 positive electrode has been modeled in order to predict the movement of lithium in the negative electrode along the negative electrode/separator interface during cell cycling. A finite-element approach was used to incorporate an intercalation positive electrode using superposition, electrode tabbing, transport using concentrated solution theory, as well as the net movement of the lithium electrode during cycling. From this model, it has been found that movement of lithium along the negative electrode/separator interface does occur during cycling and is affected by three factors: the cell geometry, the slope of the open-circuit-potential function of the positive electrode, and concentration gradients in both the solid and liquid phases in the cell. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.027210jes] All rights reserved.

Ferrese, A↗

Benefits of Fast Battery Formation in a Model System

Lithium-ion battery formation affects battery cost, energy density, and lifetime. An improved understanding of the first cycle of solid-electrolyte interphase (SEI) growth on carbonaceous negative electrodes could aid in the design of optimized formation protocols. In this work, we systematically study SEI growth during the formation of carbon black negative electrodes in a standard carbonate electrolyte. We show that the initial ethylene carbonate (EC) reduction reaction occurs at ~0.5-1.2 V during the first lithiation, except under fast lithiation rates (≥10C). The products of this EC reduction reaction do not passivate the electrode; only the SEI formed at lower potentials affects the second-cycle Coulombic efficiency. Thus, cycling quickly through the voltage regime of this reaction can decrease both formation time and first-cycle capacity loss, without an increase in subsequent-cycle capacity loss. We also show that the capacity consumed by this reaction is minimized at low temperatures and low salt concentrations. Finally, we discuss the mechanism behind our experimental results. This work reveals the fundamental processes underlying initial SEI growth on carbonaceous negative electrodes and provides insights for both optimizing the battery formation process and enabling novel electrolytes.

25 ENERGY STORAGE↗

Effective Li-Ion Transport Quantification in Composite Cathodes for All-Solid-State Batteries via Multiscale Modeling and Experiments

The tortuosity factor of composite cathodes significantly affects the rate performance of all-solid-state batteries (ASSBs) and has significant differences from systems with liquid electrolytes. Here, in this work, we report a simulation-experiment combined approach that quantifies the effective Li-ion transport in an ASSB composite cathode, which links tortuosity factor on ∼ μm scale to terminal voltage during cycling at the cell level (on ∼ cm scale). Two independent approaches of tortuosity factor quantification are considered: fitting electrochemical cycling data and verifying at different cycling rates and calculating from segmented tomography images, with the tortuosity factor quantified from both methods reaching self-consistency. The simulated terminal voltage using the quantified tortuosity factor has a small relative error of <3% compared to the experimental measurements. We find a significantly reduced value of the Bruggeman exponent of the catholyte phase (1.75), and using shape analysis, we show that rod-shaped catholyte particles play an important role in lowering the tortuosity factor.

Yao, Archie Mingze [Univ. of Michigan, Ann Arbor, ↗

X-ray absorption spectroscopy of LiBF 4 in propylene carbonate. A model lithium ion battery electrolyte

Since their introduction into the commercial marketplace in 1991, lithium ion batteries have become increasingly ubiquitous in portable technology. Nevertheless, improvements to existing battery technology are necessary to expand their utility for larger-scale applications, such as electric vehicles. Advances may be realized from improvements to the liquid electrolyte; however, current understanding of the liquid structure and properties remains incomplete. X-ray absorption spectroscopy of solutions of LiBF 4 in propylene carbonate (PC), interpreted using first-principles electronic structure calculations within the eXcited electron and Core Hole (XCH) approximation, yields new insight into the solvation structure of the Li + ion in this model electrolyte. By generating linear combinations of the computed spectra of Li + -associating and free PC molecules and comparing to the experimental spectrum, we find a Li + –solvent interaction number of 4.5. This result suggests that computational models of lithium ion battery electrolytes should move beyond tetrahedral coordination structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Virtual Battery Aggregator (Virtual Battery Aggregator for Distributed Energy Resource Management Systems)

Distributed energy resource management systems (DERMS) are being deployed in feeders with high distributed energy resource (DER) penetration to provide visibility of DERs and enable DER control strategies for grid operators. DERMS can support centralized grid controls by aggregating individual DER information into a single virtual DER model. This codebase creates algorithms for a DERMS platform that are able to aggregate a set of DERs that can be modeled as batteries, create a virtual battery model for centralized grid controls, and dispatch power setpoints to the individual DERs based on a desired virtual power setpoint received from the centralized grid control. It integrates with existing co-simulation frameworks and models for buildings, DERs, and distribution systems. While the DERMS is designed to work with batteries, it can be used with any DER that can be defined by a generalized battery model.

Blonsky, Michael↗

Comparative analysis for various redox flow batteries chemistries using a cost performance model

A robust performance-based cost model is developed for all-vanadium, iron-vanadium and iron chromium redox flow batteries. Systems aspects such as shunt current losses, pumping losses and thermal management are accounted for. The objective function, set to minimize system cost, allows determination of stack design and operating parameters such as current density, flow rate and depth of discharge (DOD). Component costs obtained from vendors are used to calculate system costs for various time frames. A 2 kW stack data was used to estimate unit energy costs and compared with model estimates for the same size electrodes. The tool has been shared with the redox flow battery community to both validate their stack data and guide future direction.

electrolyte↗

Crashworthiness Models for Automotive Batteries

Safety is a key element of any device designed to store energy, particularly of electrochemical batteries, which convert energy of chemical reactions to electrical energy. Safety considerations are especially important when applied to large automotive batteries designed for propulsion of electric vehicles (EV). The high amount of energy stored in EV battery packs translates to higher probability of fire in case of severe deformation of battery compartment due to automotive crash or impact caused by road debris. While such demand for safety has resulted in heavier protection of battery enclosure, the mechanisms leading to internal short circuit due to deformation of the battery are not well understood even on the level of a single electrochemical cell. Moreover, not all internal shorts result in thermal runaway, and thus a criterion for catastrophic failure needs to be developed. This report summarizes the effort to pinpoint the critical deformation necessary to trigger a short via experimental study on large format automotive Li-ion cells subjected to large deformations as those occurring in deformation of battery module or pack. Mechanical properties of cell components were determined via experimental testing and served as input for constitutive models of Finite Element (FE) analysis. It has been rationalized that long-range stress fields occurring in spherical indentation of battery modules would trigger different deformation and failure scenarios compared to indentation of a single cell supported by a rigid flat surface. In order to investigate large deformations characteristic of battery module, a custom experimental set up has been built where the pouch cell was deformed against a compliant backing, which was represented by a ballistic clay. Experiments were also conducted on deformation of stacks of 10 pouch cells, - configuration representing half-module in Ford Focus EV battery pack without cooling plates and structural components. Comparison of the results shows promise for the compliant backing setup for safety evaluation of battery cells under more realistic conditions compared to indentation of single cell against undeformable backing where compression and electrode particle penetration through separator could be the major mechanism for short circuit.

25 ENERGY STORAGE↗

Feedback-Based Fault-Tolerant and Health-Adaptive Optimal Charging of Batteries

The key technology barriers that hinder the growth of Electric Vehicles (EVs) are long charging time, the shorter life-time of EV batteries, and battery safety. Specifically, EV charging protocols have significant effects on battery lifetime and safety. If not charged properly, the battery could end up with shorter life, and more importantly, improper charging can cause battery faults leading to catastrophic failures. To overcome these barriers, we propose a closed-loop feedback based approach, that enables real-time optimal fast charging protocol adaptation to battery health and possess active diagnostic capabilities in the sense that, during charging, it detects real-time faults and takes corrective action to mitigate such fault effects. We utilize battery electrical-thermal model, explicit battery capacity and power fade aging models, and thermal fault model to capture battery behavior. In conjunction with the models, we adopt linear quadratic optimal control techniques to realize the feedback-based control algorithm. Simulation studies are presented to illustrate the effectiveness of the proposed scheme.

batteries↗

Battery Performance, Thermal, and Life Modeling for Southern California Edison (Cooperative Research and Development Final Report)

The objective of this project is to develop battery performance models, thermal models and life models for SCE to use in simulation and analysis of grid services involving energy storage. NREL will fit the models to three separate chemistries using test data provided by SCE. The dataset for each chemistry will include electrical, thermal and aging response to different temperatures and cycling conditions, measured under a variety of cell-level and module-level experiments described in SCE test protocol documents. Once tuned to a test dataset, the battery system model software will provide predictions of battery energy and power loss, and thus cycle and calendar life, for any energy storage grid service power profile of interest to SCE. The automated battery life modeling and simulation tool can also be applied to any other grid battery systems as long as necessary input data is available to accelerate battery model development and battery lifetime analysis.

25 ENERGY STORAGE↗

Battery Performance and Cost Model (BatPaC) Version 6.0

SF-26-016 The Battery Performance and Cost model (BatPaC) is a calculation method based on Microsoft Excel spreadsheets that has been developed at Argonne for estimating the performance and manufacturing cost of lithium-ion batteries for electric-drive vehicles including hybrid-electrics (HEV), plug-in hybrids (PHEVs) and pure electrics. BatPaC was first developed in 2007, was subsequently peer reviewed, and it has served Argonne researchers and the greater battery community in studying the impact of material properties on performance at the pack level. BatPaC has been updated and re-released multiple times since its original public release in 2011. This current version is BatPaC 6.0, which contains additional functionality needed to handle advances in automotive batteries, like the use of lithium metal and silicon anodes and the need to accommodate cell expansion and apply high levels of pressure.

KNEHR, KEVIN [Argonne National Laboratory (ANL), A↗

Sensitivity of Battery Electric Vehicle Economics to Drive Patterns, Vehicle Range, and Charge Strategies

Battery electric vehicles (BEVs) offer the potential to reduce both oil imports and greenhouse gas emissions, but high upfront costs discourage many potential purchasers. Making an economic comparison with conventional alternatives is complicated in part by strong sensitivity to drive patterns, vehicle range, and charge strategies that affect vehicle utilization and battery wear. Identifying justifiable battery replacement schedules and sufficiently accounting for the limited range of a BEV add further complexity to the issue. The National Renewable Energy Laboratory developed the Battery Ownership Model to address these and related questions. The Battery Ownership Model is applied here to examine the sensitivity of BEV economics to drive patterns, vehicle range, and charge strategies when a high-fidelity battery degradation model, financially justified battery replacement schedules, and two different means of accounting for a BEV's unachievable vehicle miles traveled (VMT) are employed. We find that the value of unachievable VMT with a BEV has a strong impact on the cost-optimal range, charge strategy, and battery replacement schedule; that the overall cost competitiveness of a BEV is highly sensitive to vehicle-specific drive patterns; and that common cross-sectional drive patterns do not provide consistent representation of the relative cost of a BEV.

25 ENERGY STORAGE↗

CanTrilBat

This application can determine the performance and chemical behavior of batteries in 1D when they are cycled. With CanTrilBat, we are developing predictive phenomenological models for battery systems to predict operating performance and rate limiting steps in the performance of battery models. Particular attention is paid to primary and secondary chemistry mechanisms, such as the thermal runaway mechanisms experienced in secondary lithium ion batteries or self-discharge reaction mechanism that all batteries experience to one extent or another. The first application of this model has been for modeling the performance of thermal batteries. However, an implementation for secondary ion batteries is next. CanTrilBat applications solves transient problems involving batteries. It is a 1-D application that represents 3-D physical systems that can be reduced using the porous flow approximation for the anode, cathode, and separator. A control volume formulation is used to track conserved quantities. An operator-split approach is used to calculate the chemistry, diffusion and electronic transport that occurs within cathode and anode particles, allowing for the reduction in code complexity.

Moffat, HarryK.↗

CanTrilBat and Cantera_apps v1.0 beta

This application can determine the performance and chemical behavior of batteries in 1D when they are cycled. With CanTrilBat, we are developing predictive phenomenological models for battery systems to predict operating performance and rate limiting steps in the performance of battery models. Particular attention is paid to primary and secondary chemistry mechanisms, such as the thermal runaway mechanisms experienced in secondary lithium ion batteries or self-discharge reaction mechanism that all batteries experience to one extent or another. The first application of this model has been for modeling the performance of thermal batteries. However, an implementation for secondary ion batteries is next. CanTrilBat applications solves transient problems involving batteries. It is a 1-D application that represents 3-D physical systems that can be reduced using the porous flow approximation for the anode, cathode, and separator. A control volume formulation is used to track conserved quantities. An operator-split approach is used to calculate the chemistry, diffusion and electronic transport that occurs within cathode and anode particles, allowing for the reduction in code complexity. All jacobian operations in CanTrilBat utilize numerical jacobians. A home grown predictor corrector scheme is used for time step control, and a home grown newton solver is used to relax the equations at each time step. Trilinos is used to solve for the resulting linear systems equation A block text input format is used to initialize options for the CanTriBat program. Within this block are the names of several XML input files, which specify the chemistry mechanism. These XML input files are read by low level Cantera routines, and serve to initialize the electrode and electrolyte chemistry mechanisms and transport properties. A GUI implementation has been contracted out to a university professor, but has not been implemented yet. It?s expected that CanTriBat will have the capability to do adaptive grid refinement in later versions. Grids will be halved based on an complicated set of heuristic criteria, based on how well the mesh captures changes to the first and second derivatives of selected solution components. Primary emphasis is given towards converged profiles for IV performance.

Moffat, HarryK.↗

CanTrilBat

This application can determine the performance and chemical behavior of batteries in 1D when they are cycled. With CanTrilBat, we are developing predictive phenomenological models for battery systems to predict operating performance and rate limiting steps in the performance of battery models. Particular attention is paid to primary and secondary chemistry mechanisms, such as the thermal runaway mechanisms experienced in secondary lithium ion batteries or self-discharge reaction mechanism that all batteries experience to one extent or another. The first application of this model has been for modeling the performance of thermal batteries. However, an implementation for secondary ion batteries is next. CanTrilBat applications solves transient problems involving batteries. It is a 1-D application that represents 3-D physical systems that can be reduced using the porous flow approximation for the anode, cathode, and separator. A control volume formulation is used to track conserved quantities. An operator-split approach is used to calculate the chemistry, diffusion and electronic transport that occurs within cathode and anode particles, allowing for the reduction in code complexity.

Moffat, Harry K.↗