Search NASA⌕ Search

SEARCH · Search NASA

Results for “Binding Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Elucidating the Influence of Residual Polymer and Gas Environment on the Electronic Structure of a Graphene Layer Using in Situ APXPS

We use in situ ambient pressure X-ray photoelectron spectroscopy (APXPS) and ultraviolet photoelectron spectroscopy (UPS) to develop an effective method for studying changes in the graphene (Gr) electronic structure according to certain circumstance. The amount of polymethyl methacrylate (PMMA) residual polymer (RP), inevitably generated during the Gr transfer process, is significantly reduced from Gr surface by thermal annealing. This processed Gr is then sequentially exposed to specific gas environments (Ar, N 2 , O 2 , and CO 2 ), and APXPS or UPS is carried out to investigate the variations in the Gr electronic structure including the work function. When the amount of PMMA RP on Gr is reduced, the position of the main carbon peak shifts by more than 0.4 eV to a higher binding energy (in XPS spectra), and the secondary electron cutoff moves by about 0.2 eV to a lower binding energy (in UPS spectra). These changes are generally caused by a decrease in the Gr work function. On the other hand, exposure to the gas environments at different temperatures that we investigated did not produce significant changes in the work function and chemical states of Gr. These results confirm that the material in contact with Gr should be considered to achieve the desired Gr performance in electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mitigating Green's function Monte Carlo signal-to-noise problems using contour deformations

The Green's function Monte Carlo (GFMC) method provides accurate solutions to the nuclear many-body problem and predicts properties of light nuclei starting from realistic two- and three-body interactions. Controlling the GFMC fermion-sign problem is crucial, as the signal-to-noise ratio decreases exponentially with Euclidean time, requiring significant computing resources. Inspired by similar scenarios in lattice quantum field theory and spin systems, in this work, we employ integration contour deformations to improve the GFMC signal-to-noise ratio. Machine learning techniques are used to select optimal contours with minimal variance from parameterized families of deformations. As a proof of principle, we consider the deuteron binding energies and Euclidean density response functions. We only observe mild signal-to-noise improvement for the binding energy case. On the other hand, we achieve an order of magnitude reduction of the variance for Euclidean density response functions, paving the way for computing electron- and neutrino-nucleus cross-sections of larger nuclei.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

From electricity to fuels: Descriptors for C 1 selectivity in electrochemical CO 2 reduction

Electrochemical reduction of carbon dioxide (CO 2 RR) over transition metals follows a complex reaction network. Here, we combine observations from experimental literature with a theoretical analysis of energetics to rationalize that not all intermediates in the reduction of CO 2 are formed through direct protonation steps. We derive a selectivity map for two-electron products (carbon monoxide (CO) and formate) on pure metal surfaces using only the CO and OH binding energies as descriptors. For the pure metals that are selective towards CO formation, the variation of the CO binding energy is sufficient to further subdivide the map into domains that predominantly form H 2 , CO, and more reduced products. Our analysis rationalizes experimentally observed product distributions in CO 2 RR across pure metal systems. Overall, we highlight the need for additional material screening descriptors for CO 2 R and the importance of considering competition from the elementary steps of the hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Binding of radionuclides and surrogate to 18-crown-6 ether by density functional theory

For this work, we use density functional theory to investigate the interactions of cerium, americium, and curium cations with crown ethers. Our calculations reveal that the modeled structure of cerium integrated within the crown ether is in good agreement with experimental data, with the negative binding energy indicating that capturing the cerium nitrates is thermodynamically favorable. Our results demonstrate that crown ethers can also bind americium and curium, providing insights into the potential applications of crown ether in radionuclide sequestration. Finally, we explore the impact of the skeleton modification of different crown ethers through by substitution of nitrogen atoms in the core of the crown ether for oxygen atoms and find that this structural modification significantly increases the radionuclide binding energies. These findings provide insights on the potential for the use of organic linkers such as crown ethers to address the urgent needs in radionuclide sequestration, separation and sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Corrosion and Enhanced Hydrogen Evolution in Electrochemical Reduction of Ammonium Carbamate on Transition Metal Surfaces

Experiments and theory are combined to search for catalyst activity and stability descriptors for the direct reactive capture and conversion (RCC) of CO 2 in ammonia capture solutions using Cu, Ag, Au, Sn, and Ti electrodes. Two major phenomena emerge in RCC that are not predominant in the electrochemical CO 2 reduction (CO 2 R) reaction, namely, the rapid corrosion and restructuring of the catalyst in the presence of the CO 2 -ammonia adducts and the promotion of the competing hydrogen evolution reaction (HER). The prevalence of HER in RCC is correlated to the electrostatic attraction of the protonated amine to the electrode and the repulsion of the captured CO 2 , using the potential of zero charge (PZC). The stability of catalysts under RCC conditions is a function of the applied potential and cannot be readily predicted using binding energy descriptors commonly used in the prediction of CO 2 R activity. Finally, a direct correlation between calculated binding energies of CO 2 R intermediates, atomic oxygen, hydrogen, and ammonia and the activity and stability of transition metals for RCC cannot be found, highlighting the need for descriptors beyond those known for CO 2 R.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Mitigating Green's function Monte Carlo signal-to-noise problems using contour deformations

The Green's function Monte Carlo (GFMC) method provides accurate solutions to the nuclear many-body problem and predicts properties of light nuclei starting from realistic two- and three-body interactions. Controlling the GFMC fermion sign problem is crucial, as the signal-to-noise ratio decreases exponentially with imaginary time, requiring significant computing resources. Inspired by similar scenarios in lattice quantum field theory and spin systems, in this work, we employ integration contour deformations to improve the GFMC signal-to-noise ratio. Machine learning techniques are used to select optimal contours with minimal variance from parametrized families of deformations. As a proof of principle, we consider the deuteron binding energies and Euclidean density response functions. Here, we only observe mild signal-to-noise improvement for the binding energy case. On the other hand, we achieve an order of magnitude reduction of the variance for Euclidean density response functions, paving the way for computing electron- and neutrino-nucleus cross sections of larger nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Search for a bound di-neutron by comparing 3 He(e,e'p)d and 3 H(e,e'p)X measurements

We report on a search for a bound di-neutron by comparing electron-induced proton-knockout $(e,e'p)$ measurements from Helium-3 ($^3$He) and Tritium ($^3$H). The measurements were performed at Jefferson Lab Hall A with a 4.326 GeV electron beam, and kinematics of large momentum transfer $Q^2 \approx 1.9$ (GeV/$c$)$^2$ and $x_B>1$, to minimize contributions from non quasi-elastic (QE) reaction mechanisms. Analyzing the measured $^3$He missing mass ($M_{miss}$) and missing energy ($E_{miss}$) distributions, we can distinguish the two-body break-up reaction, in which the residual proton-neutron system remains bound as a deuteron. In the $^3$H mirror case, under the exact same kinematic conditions, we do not identify a signature for a bound di-neutron with similar binding energy to that of the deuteron. We calculate exclusion limits as a function of the di-neutron binding energy and find that, for binding equivalent to the deuteron, the two-body break-up cross section on $^3$H is less than 0.9% of that on $^3$He in the measured kinematics at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Xenon–metal pair formation in UO 2 investigated using DFT + U

A recent experimental study on a spent uranium dioxide (UO 2 ) fuel sample from Belgium Reactor 3 identified a unique pair structure formed by the noble metal phase (NMP) and fission gas [xenon (Xe)] precipitate. However, the fundamental mechanism behind this structure remains unclear. The present study aims to provide an understanding of the interaction between five different metal precipitates [molybdenum (Mo), ruthenium (Ru), palladium (Pd), technetium (Tc), and rhodium (Rh)] and the Xe fission gas atoms in UO 2 , by using density functional theory (DFT) in combination with the Hubbard U correction to compute the formation energies involved. All DFT + U calculations were performed with occupation matrix control to ensure antiferromagnetic ordering of UO 2 . The calculated formation and binding energies of the Xe and solid fission products in the NMP reveal that these metal precipitates form stable pair structures with Xe. Notably, the formation energy of Xe–metal pairs is lower than that of the isolated single defects in all instances, with Pd and Mo showing the most favorable binding energy, likely accounting for the observed pair structure formation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The Thomas theorem and the Efimov States within a generalized Bohr model

Using a generalized Bohr model and the hyper-spherical formalism for a three-body system, we derive the universal energy functions. We apply our model to 4He atom where only the Coulomb potential is dominant and find that its binding energy is well reproduced (less than 5.5% difference). Later, we focus on the equal mass three-body systems and derive the Thomas theorem assuming a simple interaction depending on the range of the potential. We discuss the conditions for which an unbound two-body system produces a bound three-body system and apply our model to 4He and triton atoms as well as to the triton nucleus. Using their scattering lengths and effective ranges, we are able to reproduce the two-body or the three-body binding energies (less than 5% difference) with only one parameter fitted. Prediction for excited (Efimov) levels are also given and in particular we demonstrate that for some hyper-angles two equal minima appear which indicate a phase (shape) transition similar to the Landau's theory of phase transition. We suggest that the observed excited levels in two different experiments for the triton nucleus are indeed Efimov levels and there may be more surprises.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1993

H2 in interstellar and extragalactic ices - Infrared characteristics, ultraviolet production, and implications

H2 is the most abundant molecule in the universe. We demonstrate that this molecule may be an important component of interstellar and possibly intergalactic ices, both because it can be formed in situ, within the ices, and because gas-phase H2 can freeze out onto dust grains in some astrophysical environments. The condensation-sublimation and infrared spectral properties of ices containing H2 are presented. We show that solid H2 in H2O-rich ices can be detected by an infrared absorption band at 4137/cm (2.417 microns). The surface binding energy of H2 to H2O ice was measured to be Delta-H(s)/k = 555 +/- 35 K. Surface binding energies can be used to calculate the residence times of H2 on grain surfaces as a function of temperature. Some of the implications of these results are considered.

Sandford, Scott A.↗
DOE OSTI2023

Surface Analysis Insight Note: Observations relating to photoemission peak shapes, oxidation state, and chemistry of titanium oxide films

It is common practice to describe the coordination of metal atoms in a binding configuration with their nearest neighbors in terms of oxidation state, a measure by which the number of electrons redistributed between atoms forming chemical bonds. In XPS terms, change to an oxidation state is commonly inferred by correlating photoemission signal with binding energy. The assumption, when classifying photoemission signals into distinct spectral shapes, is that a distribution of intensities shifted to lower binding energy is evidence of a reduction in oxidation state. In this Insight note, we raise the prospect that changes in photoemission peak shape may occur without obvious changes, determined by XPS in stoichiometry for a material. It is well known that TiO 2 measured by XPS yields reproducible Ti 2p photoemission peaks. However, on exposing TiO 2 to ion beams, Ti 2p photoemission evolves to complex distributions in intensity, which are particularly difficult to analyze by traditional fitting of bell-shaped curves to these data. For these reasons, in this Insight note, a thin film of TiO 2 deposited on a silicon substrate is chosen for analysis by XPS and linear algebraic techniques. Alterations in spectral shapes created from modified TiO 2 , which might be interpreted as the change in oxidation state, are assessed in terms of relative proportions of titanium to oxygen. It is found through detailed analysis of spectra that quantification by XPS, using procedures routinely used in practice, is not in accord with the typical interpretations of photoemission shapes. The data processing methods used and results presented in this work are of particular relevance to elucidating fundamental phenomena governing the surface evolution of materials-enabled energy processes where cyclic/non-steady usage changes the nature of bonding, especially in the presence of contaminants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Robustness of Vacancy-Bound Non-Abelian Anyons in the Kitaev Model in a Magnetic Field

Non-Abelian anyons in quantum spin liquids (QSLs) provide a promising route to fault-tolerant topological quantum computation. In the exactly solvable Kitaev honeycomb model, such anyons of the QSL state can be bound to nonmagnetic spin vacancies and endowed with non-Abelian statistics by an infinitesimal magnetic field. Here, we investigate how this approach for stabilizing non-Abelian anyons extends to a finite magnetic field represented by a proper Zeeman term. Through large-scale density-matrix renormalization group simulations, we compute the vacancy-anyon binding energy as a function of magnetic field for both the ferromagnetic and antiferromagnetic Kitaev models. Here, we find that anyon binding remains robust within the entire QSL phase for the ferromagnetic Kitaev model but breaks down already inside this phase for the antiferromagnetic Kitaev model. To compute a binding energy several orders of magnitude below the magnetic energy scale, we introduce both a refined definition and an extrapolation scheme based on carefully tailored perturbations.

Xiao, Bo [Oak Ridge National Laboratory (ORNL), Oa↗
NASA NTRSDate not supplied

LENR Products: Lattice Confinement Fusion (LCF), Fission, or Both?

Lattice Confinement Fusion (LCF) or Low Energy Nuclear Reactions (LENR) generate heat from the high energy products they produce. Conventionally, d-d fusion reactions may produce either 2.45 MeV neutrons, 3 MeV protons, or high energy gammas. Generally, fission will give 5-10x the excess energy of fusion. However, aneutronic “cold fusion” would provide 24 MeV/reaction, D(d,γ) 4 He, where the gamma is suppressed. In a series of pressurized gas cycling experiments with a palladium silver (75 wt.% Pd and 25 wt.% Ag or Pd25Ag) alloy [1], samples cycled with deuterium showed excess heat via unexplained temperature rises. Post-test analysis of the Pd25Ag samples using a Scanning Electron Microscope (SEM/EDX) showed several molten features containing anomalous elements other than Pd and Ag. Researchers such as Liu et al [2] have also observed transmutations under similar conditions. These molten areas and anomalous elements suggest Pd fission. This nuclear process has been referred to as nuclear disintegration. Either nuclear fission or disintegration may result in neutron rich fragments. The fragments would rapidly beta decay to shorter lived daughters until they reach stability. We’ve observed evidence of both fusion and fission products [3]. Figure 1 shows neutron spectroscopy showing fusion and boosted neutron energies in bremsstrahlung-initiated fusion of TiD2. Figure 2 shows possible fission products from D2 gas cycled Pd25Ag alloy. Alternatively, Oppenheimer-Phillips stripping reactions, enhanced by electron screening [4] may also occur. In this case, the 8.6 MeV binding energy per Pd or Ag minus the 2.2 MeV deuteron binding energy leaves 6.4 MeV distributed between the reaction products. The energy is shared inversely proportional to the masses of the stripped off nucleon, p or n, and the new target nucleus.

Theresa L. Benyo↗
NASA NTRSDate not supplied

LENR Products: Lattice Confinement Fusion (LCF), Fission, or Both?

Lattice Confinement Fusion (LCF) or Low Energy Nuclear Reactions (LENR) generate heat from the high energy products they produce. Conventionally, d-d fusion reactions may produce either 2.45 MeV neutrons, 3 MeV protons, or high energy gammas. Generally, fission will give 5-10x the excess energy of fusion. However, aneutronic “cold fusion” would provide 24 MeV/reaction, D(d,γ) 4 He, where the gamma is suppressed. In a series of pressurized gas cycling experiments with a palladium silver (75 wt.% Pd and 25 wt.% Ag or Pd25Ag) alloy [1], samples cycled with deuterium showed excess heat via unexplained temperature rises. Post-test analysis of the Pd25Ag samples using a Scanning Electron Microscope (SEM/EDX) showed several molten features containing anomalous elements other than Pd and Ag. Researchers such as Liu et al [2] have also observed transmutations under similar conditions. These molten areas and anomalous elements suggest Pd fission. This nuclear process has been referred to as nuclear disintegration. Either nuclear fission or disintegration may result in neutron rich fragments. The fragments would rapidly beta decay to shorter lived daughters until they reach stability. We’ve observed evidence of both fusion and fission products [3]. Figure 1 shows neutron spectroscopy showing fusion and boosted neutron energies in bremsstrahlung-initiated fusion of TiD2. Figure 2 shows possible fission products from D 2 gas cycled Pd25Ag alloy. Alternatively, Oppenheimer-Phillips stripping reactions, enhanced by electron screening [4] may also occur. In this case, the 8.6 MeV binding energy per Pd or Ag minus the 2.2 MeV deuteron binding energy leaves 6.4 MeV distributed between the reaction products. The energy is shared inversely proportional to the masses of the stripped off nucleon, p or n, and the new target nucleus.

Theresa L. Benyo↗
DOE OSTI2021

Consequences of adsorbate-adsorbate interactions for apparent kinetics of surface catalytic reactions

Lateral adsorbate interactions at catalyst surfaces are known to influence adsorption energies and reaction rates. Lattice-based kinetic Monte Carlo (kMC) simulations are able to capture these influences, but such models are typically parameterized for a specific reaction network and catalyst surface. Here we report kMC simulations to probe the influence of lateral interactions on simulated rates, rate orders, apparent activation energies, and Sabatier plots. We construct a simple, two-step reaction network involving a single adsorbate and rate- limiting diatomic dissociation, employ a generic repulsive lateral interaction model consistent with known adsorbate-adsorbate interactions on metal surfaces, and a rate model consistent with known Brønsted-Evans-Polyani relationships for diatomic dissocations. Furthermore, we juxtapose reaction kinetics over a wide range of reaction conditions and catalyst binding energies, as a function of interaction strength. We find that at a given zero-coverage binding energy and external conditions, adsorbate coverage decreases monotonically with increasing interaction strength, but absolute rates can vary linearly or nonlinearly. Interactions flatten the Sabatier volcano and shift the maximum towards stronger binding. Influences on apparent rate orders and activation energies are modest and are sensitive to interaction-induced adsorbate ordering. Model predictions are sensitive to lattice size effects at high coverages. The results, modelled for a simple reaction system, highlight the generic consequences of lateral interactions and guidance for identifying their signatures in observed kinetics.

kinetic Monte Carlo↗
DOE OSTI2021

Self-Assembly of Metallo-Supramolecules with Dissymmetrical Ligands and Characterization by Scanning Tunneling Microscopy

Asymmetrical and dissymmetrical structures are widespread and play a critical role in nature and life systems. In the field of metallo-supramolecular assemblies, it is still in its infancy for constructing artificial architectures using dissymmetrical building blocks. Herein, we report the self-assembly of supramolecular systems based on two dissymmetrical double-layered ligands. With the aid of ultra-high-vacuum, low-temperature scanning tunneling microscopy (UHV-LT-STM), we were able to investigate four isomeric structures corresponding to four types of binding modes of ligand LA with two major conformations complexes A. The distribution of isomers measured by STM and total binding energy of each isomer obtained by density functional theory (DFT) calculations suggested that the most abundant isomer could be the most stable one with highest total binding energy. Lastly, through shortening the linker between inner and outer layers and the length of arms, the arrangement of dissymmetrical ligand LB could be controlled within one binding mode corresponding to the single conformation for complexes B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Role of Strong Gravity and the Nuclear Equation of State on Neutron-star Common-envelope Accretion

Common-envelope evolution is important in the formation of neutron star binaries within the isolated binary formation channel. As a neutron star inspirals within the envelope of a primary massive star, it accretes and spins up. Because neutron stars are in the strong-gravity regime, they have a substantial relativistic mass deficit, i.e., their gravitational mass is less than their baryonic mass. This effect causes some fraction of the accreted baryonic mass to convert into neutron star binding energy. The relativistic mass deficit also depends on the nuclear equation of state, since more compact neutron stars will have larger binding energies. We model the mass growth and spin-up of neutron stars inspiraling within common-envelope environments and quantify how different initial binary conditions and hadronic equations of state affect the post-common-envelope neutron star's mass and spin. From these models, we find that neutron star mass growth is suppressed by ≈15%–30%. We also find that for a given amount of accreted baryonic mass, more compact neutron stars will spin-up faster while gaining less gravitational mass, and vice versa. Here, this work demonstrates that a neutron star's strong gravity and nuclear microphysics plays a role in neutron-star-common-envelope evolution, in addition to the macroscopic astrophysics of the envelope. Strong gravity and the nuclear equation of state may thus affect both the population properties of neutron star binaries and the cosmic double neutron star merger rate.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1989

Thermonuclear breakup reactions of light nuclei. I - Processes and effects

Temperature and density conditions are considered for the occurrence of breakup reactions of light nuclei in astrophysical plasmas. The proton-induced endothermic process is shown to be the principal mechanism for nuclear breakdown in a plasma. The phenomenon occurs at a temperature of about 1 MeV, which is a fraction of the typical binding energy per nucleon in nuclei. The temperature for breakup of He-4 is about twice as large, because of the higher binding energy. Depending on the temperature attained in the plasma, the initial concentration of elements heavier than hydrogen can be depleted. However, if it attains a temperature of about 1 MeV, breaking up the metals (C, N, O, Ne, Mg) but not He-4, an increase in the He-4 abundance by as much as 10 percent can result, since these elements essentially break down to alpha particles.

Guessoum, Nidhal↗