Search NASA⌕ Search

SEARCH · Search NASA

Results for “Calorimetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ultra–high molecular weight polyethylene micro–ribbon fibers gel spun using orange terpenes

Toxic, hazardous petrochemical solvents are commonly used for industrial-scale ultra-high molecular weight polyethylene (UHMWPE) fiber production, but orange terpenes, a byproduct of orange fruit production, present a bio-derived, sustainable alternative. In this work, fine UHMWPE fibers were spun using orange terpenes as the spin solvent, hot-drawn at a draw ratio of 5:1, investigated for their morphology, microstructure, and thermal and mechanical properties. The resulting fibers exhibited a flat, micro-ribbon cross-section, which is highly desirable for achieving high fiber volume fractions in UHMWPE-fiber reinforced composites. After drawing, the fibers possessed 4× greater breaking tenacity than any previously published studies on UHMWPE fibers spun using orange terpenes with a tenacity of 8.6 cN/dtex and tensile modulus of 229.2 cN/dtex. Microstructural analysis via differential scanning calorimetry and X-ray diffraction revealed that the hot drawing process significantly increased molecular orientation, but crystallinity decreased due to crystallite melting during drawing. Therefore, the mechanical properties of these fibers may be significantly improved with optimization of the fiber drawing process. As a work, this work establishes the strong potential of orange terpenes as an environmentally-friendly alternative solvent for UHMWPE gel spinning and sets a foundation for future parametric optimization of the spinning and drawing of these fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and characterization of biobased copolyesters based on pentanediol: (1) Poly(pentylene dodecanoate–co–furandicarboxylate)

A series of biobased aliphatic-aromatic copolyesters, poly(pentylene dodecanoate-co-furandicarboxylates) (PPeDFs) were synthesized via an esterification and polycondensation melt process. The copolyesters were characterized using gel permeation chromatography, Fourier transform infrared spectroscopy, 1 H NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, wide angle x-ray scattering, and tensile testing. The thermal transition behavior was strongly dependent on composition, with the melting and glass transition temperatures reaching a minimum at approximately equimolar ratio of D to F. All copolyesters were stable below 300°C with their R 600 (the weight of material remaining at 600°C) values increasing with F fraction. PPeD to PPeDF30 (e.g., mole ratio D/F = 7:3) show sharp PPeD crystalline reflections only while broad PPeF reflections are shown in PPeF and PPeDF90. PPeDF40 to PPeDF80 showed both crystal structures. The fractional crystallinity for the PPeD was much higher than PPeF and the fractional crystallinity of the copolymers showed a minimum at D/F ratios closer to the latter. Here, the stress at break and modulus both exhibited maxima at D/F ratios that were either high or low, but somewhat surprisingly a strong maximum in percent elongation at break of over 600% occurs at PPeDF40. For this composition, a typical plastic behavior curve was found including a yield point, high elongation at break, and strain hardening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Positron annihilation lifetime spectroscopy study of polyvinylpyrrolidone‐added polyvinylidene fluoride membranes: Investigation of free volume and permeation relationships

ABSTRACT Polyvinylidene fluoride (PVDF) membranes were prepared via the phase inversion method from casting solutions containing PVDF, dimethylformamide (DMF), and polyvinylpyrrolidone (PVP) as pore former. PVP was used in the casting solution in a range of 0–5 wt % and extracted. The effect on membranes of using PVP in the casting process was analyzed by X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, viscosity, and water permeability techniques. With an increase of PVP from 0 to 5 wt %, the PVDF casting solution viscosities increased from 858 to 1148 cP; the resulting PVDF membrane thickness increased; and the crystallinity of PVDF membranes decreased from 40.0 to 33.3%, which indicates that the addition of PVP inhibits the degree of crystallization in the PVDF membranes. SEM results revealed the shape and size of macropores in the membranes; these macropores changed after PVP addition to the casting solutions. The impact of structural changes on free‐volume properties was evaluated using positron annihilation lifetime spectroscopy (PALS) studies. PALS analysis indicated no effect on the average radius (~3.4 Å) of membrane free‐volume holes from the addition of PVP to the casting solution. However, the percentage of o ‐Ps pick‐off annihilation intensity, I 3 , increased from 1.7 to 5.1% with increased PVP content. Further, increasing the PVP content from 0.5 to 5% resulted in an increased final pure water permeability flux. For instance, the 210 min flux for a 14% PVDF + 0.5% PVP membrane was found to be 3.3 times greater than a control membrane having the same PVDF concentration. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58 , 589–598

Eren, Bilge↗
DOE OSTI2024

The melt memory effects in polymer crystallization

This paper presents a systematic review of the literature on the melt memory effects observed in polymers, an area that has engendered considerable debate for over 50 years. Recent advances in experimental techniques have provided fresh insights into how a polymer's thermal history influences its recrystallization behavior. It has been observed that given other conditions unchanged, the crystallization temperature during recrystallization decreases with an increase in the melt temperature T s above the melting point T m until a critical melt temperature is attained. This phenomenon also extends to the half-time of crystallization and the secondary structures, such as lamellar thickness, of semi-crystalline polymers. Despite these findings, a comprehensive constitutive model that encapsulates polymer melt memory effects remains elusive. Cutting-edge instrumentation, including in situ small and wide-angle X-ray scattering, temperature-controlled Fourier transform infrared spectroscopy, and flash differential scanning calorimetry, have posed significant challenges to the traditional nucleation and growth models established in the 1970s. These models are foundational to our understanding of polymer crystallization, which is an integral part of polymer processing and production. In this review, the historical contours of this discourse are traced, with an examination of both the recent experimental breakthroughs and theoretical advancements pertinent to polymer melt memory effects. In conclusion, this paper delves into the prevailing theories of polymer nucleation and crystallization and engages with theoretical discussions and numerical simulations that attempt to elucidate and rationalize these melt memory phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quasi-elastic neutron scattering study on dynamically asymmetric polymer blends

Compatibility between polymers with different glass transition temperatures controls the thermomechanical properties of blends. This work explores the segmental dynamics of poly(methyl acrylate) (PMA) chains when they are blended with polymers of different rigidities and miscibility. Inspired by the intriguing dynamic asymmetry of chains within the interfacial layer of nanoparticles, this study aims to understand dynamic heterogeneity in dynamically asymmetric blends of PMA/poly(methyl methacrylate) (PMMA), PMA/polystyrene (PS), and PMA/poly(ethylene oxide) (PEO) using the differential scanning calorimetry (DSC) and quasi-elastic neutron scattering (QENS) measurements below and above the glass transition temperature of PMMA or PS. Further, results revealed that the segmental jump distance of PMA increased on blending due to volume enhancement. The reduced effective diffusivity of PMA in PMMA is attributed to PMMA's enhanced flexibility (lower characteristic ratio, C ∞ ) and superior interaction (lower ) when compared with the PS environment. The results demonstrate that the chain rigidity and miscibility affect the free volume, interchain cooperativity, and segmental dynamics in dynamically asymmetric blends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Energetic Copolymers From LLM-105 and Aliphatic Isocyanates

Energetic polymers typically feature fuel-rich backbones with pendant oxidizing explosophores, which are used to modify pressure and temperature characteristics in energetic formulations. However, these pendant explosophores generally increase sensitivity and decrease the thermal stability of the polymer in the condensed phase. Direct polymerization of insensitive high explosives (IHEs) bearing polymerizable functionalities, such as amines, provides a synthetic platform for deriving tunable energetic materials. Here, this work demonstrates the first direct polymerization of the IHE 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) with aliphatic isocyanate comonomers to yield an energetic copolyurea (PUa1) and an energetic copolyurea network (PUa2). 1 H and 13 C nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR) confirm copolyurea synthesis. PUa1 exhibited branching reactions commonly found in polyurea syntheses, and these side reactions were suppressed in PUa2 through use of a polyfunctional isocyanate. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) demonstrate the energetic IHE based polyurea preserves the energetic decomposition of the parent monomer LLM-105 in PUa1 (1203 J g −1 ) and PUa2 (687 J g −1 ), albeit with reduced thermal stability with peak decomposition temperatures of 235°C and 233°C, respectively. This work presents a new approach for generating energetic polymers from IHE cores with tunable energetic, thermal, and structural characteristics.

Chemistry↗
DOE OSTI2025

Updating Critical Temperature Calculations for Several Secondary High Explosives

In designing experiments where high explosives (HEs) are heated, it is important to have an understanding of where thermal runaway may occur. This determination is often done by using the Frank-Kamenetskii (FK) equation. For several highly-studied HEs, the parameters necessary for FK calculations are typically referenced from decades-old literature, and more recent experimental data have shown that these values require adjustment. For example, some of the legacy parameters dangerously overpredict the critical temperature by tens of degrees relative to more recent observed values. Herein, we first summarize historical results and highlight the importance of insulation effects when estimating critical temperatures for small samples, which is especially relevant to small-scale aging, compatibility, and characterization experiments. Here, we then present updated FK parameters for several common secondary CHNO HEs like RDX, HMX, PETN, and TATB, as well as the first reported values for 2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105). Our updated parameters produce critical-temperature curves that are consistent with both mm-scale differentical scanning calorimetry (DSC) measurements and cm-scale data from the Lawrence Livermore National Laboratory one-dimensional time-to-explosion (ODTX) experiment. In analyzing the critical temperature versus sample size curves derived from the transcendental FK equation, we discovered that these curves are remarkably well described by a simple power-law function with a universal power of 0.142 and a HE-specific scaling factor.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

New Synthetic Route to 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan, Important Decomposition Product of 1,3,5‐Triamino‐2,4,6‐trinitrobenzene

The important 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) decomposition byproduct, 4,6-diamino-5,7-dinitro-benzo-furazan (F 1 ), was prepared in a four-step reaction sequence starting with commercially available materials through a key intermediate, 4,6-dichloro-5,7-dinitro-benzo-furazan. The introduction of azido to 4,6-dichloro-benzo-furazan, followed by nitration and amination gave F 1 in good yield. This new method showed a greatly improved yield and ease of purification than previous methods (the total yield was 30%–40% in seven steps). F 1 is a stable yellow solid with a melting point of 308.7°C and a thermal decomposing temperature of 310.3°C (differential scanning calorimetry at 10°C/min heating rate). The solid-state structure was solved by single-crystal X-ray analyses at low temperatures (100 K). The compound crystallizes in a P 2 1 c space group with the formula C 6 H 4 N 6 O 5 •H 2 O with 12 molecules of F 1 /H 2 O in the unit cell. This compound has eluded complete characterization for almost 50 years. With this information, more advanced decomposition models can be created to further improve critical safety margins in handling the energetic material, TATB.

decomposition↗
DOE OSTI2022

Amorphization and Crystallization of Hexanitroazobenzene (HNAB) Using Conventional DSC and Flash DSC

Abstract The present work presents results from an investigation of the glass transition and crystallization behaviors of HNAB tested over more than five orders of magnitude of cooling rate from 0.005 °C/s to 600 °C/s (0.3 to 36000 °C/min) by a combination of conventional and Flash differential scanning calorimetry (DSC). The work quantifies the influence of the thermal amorphization route on the properties of this high explosive. Cooling rates faster than 100 °C/s (6000 °C/min) result in amorphous HNAB as expected from prior work, but we also find that amorphization of the HNAB occurs at cooling rates slower than 0.008 °C/s (0.5 °C/min). The behavior of the amorphous HNAB made by slow cooling is compared with that of amorphous HNAB made by fast cooling, as well as with that made by solvent casting in terms of glass transition temperature, apparent activation energy of glass transition, and dynamic fragility parameter m . Besides, the non‐isothermal crystallization response as a function of cooling rate is also reported. The thermal stability and decomposition energy of amorphous HNAB are compared with those of the crystalline counterpart, being similar heats of decomposition of 3295 and 3392 J/g, respectively; suggesting that the amorphous HNAB will have similar thermal stability and chemical energy to the crystalline form.

Koh, Yung P.↗
DOE OSTI2023

Towards a heat- and mass-balanced kinetic model of TATB decomposition

We report TATB (1,3,5-triamino-2,4,6-trinitrobenzene) was thermally degraded by two small-scale analytical methods – simultaneous differential scanning calorimetry and thermogravimetric analysis (SDT) and a hot-stage microscope with Fourier Transform Infrared (FTIR) analysis capabilities. SDT used ramped heating, isothermal soaking, and thermal pretreatment at various conditions. The heat flow and mass loss were monitored during various treatment conditions to derive chemical decomposition kinetics and Arrhenius parameters. FTIR experiments used isothermal heating, and changes were monitored spectroscopically. Solid samples generated at specific conditions were collected from both methods and were analyzed by DMSO extraction followed by chemical speciation by optical and mass spectrometric methods. Characterization provided the following reaction insights: TATB decreases in a sigmoidal pattern in isothermally heated samples. Other soluble products gradually increase in concentration and then abruptly decline in concentration during the second exotherm, such as diamino-dinitro-benzofurazan and amino-nitro-benzodifurazan. FTIR showed gradual changes in the amino and nitro functionality, shifting positions and decreasing intensity for the first 40 min. Then the solid gradually appeared more like an amorphous C with N incorporated, similar to previous studies on thermally degraded TATB-type materials. Extracted residues (DMSO-soluble components removed) examined by FTIR showed an abrupt change in chemical composition between 40- and 45-min isothermal treatment, indicating early forming solids are different than later forming residues. A reliable mass- and energy-balanced global reaction network must include at least two autocatalytic reactions, either in parallel or series, and at least one must have an explicit initiation reaction having a low activation energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparative analysis of sublimation and thermal decomposition of TATB

This experimental study investigated the effects of confinement, starting mass, and heating rate on TATB thermal decomposition and sublimation using a combined Thermo-Gravimetric Analyzer and Differential Scanning Calorimetry (TGA/DSC) instrument. The confinement of volatile products was varied using different pinhole sizes with TGA/DSC pans. The measurements showed the open pan experiments without lids/pinholes resulted in complete sublimation of TATB between 320 °C and 360 °C. The heat of sublimation was determined to be 176 kJ/mol (42 kcal /mol), consistent with literature data obtained from other experimental techniques. The use of pinholes suppressed the sublimation of TATB such that the decrease in pinhole size resulted in 1) an increase in the enthalpy of reaction and an increase in the amount of carbonaceous material remaining at the end of decomposition, and 2) convergence of the two peak temperatures corresponding to maximum heat flow and maximum weight loss. Also, a transition from a two-exotherm thermal decomposition behavior towards a single-exotherm occurred as the pinhole size was decreased for a given starting mass or as the starting mass was increased for a given pinhole size. These results indicate the kinetics of TATB sublimation, TATB thermal decomposition, and gas diffusion out of a TGA/DSC pan can all compete and result in significantly different enthalpies, amounts of remaining materials, and peak temperatures depending on the pinhole size and starting mass used in the measurements. Furthermore, the results also indicate precise control of process variables (pinhole size, starting mass, and heating rate) in TGA/DSC measurements is required for thermal safety assessment of explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Syntheses and characterization of isotopically labeled 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

Synthesis and characterization of chemical analogues of TATB, where specific atoms in the structure have been isotopically substituted, are reported. 15 N, 2 H, and 18 O have replaced the naturally occurring isotope distributions in the amino and/or the nitro attendant sites and 13 C has replaced the carbon in the ring structure. A modified wet-amination method was used to produce the analogues, and the isotopic replacements were performed by selective choice of labeled precursors. Four 15 N-labeled compounds (N replaced in the amino and nitro positions), two deuterium-labeled compounds (hydrogens replaced on the amino groups), and one 13 C-labeled compound (C in the ring substituted) were synthesized of high isotopic and chemical purity. One partially labeled 18 O-labeled compound (O in the nitro position) was a result of incomplete labeling due to exchange reactions during synthesis. The compounds were characterized by various spectroscopic methods – mass spectrometry (MS), solid-state nuclear magnetic resonance (SS-NMR), infrared (FTIR), powder x-ray diffraction (PXRD), and differential scanning calorimetry (DSC), depending upon the substitution. In conclusion, these compounds have been critical to the efforts in understanding the decomposition pathways of TATB when exposed to abnormal thermal environments.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thermal Decomposition Kinetics of 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan

This experimental study investigated the thermal decomposition kinetics of 4,6-diamino-5,7-dinitro-benzo-furazan (referred to as F1 hereafter)—an important decomposition product of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB—a prototypical insensitive high explosive). Simultaneous differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and mass spectrometry (MS) measurements were employed to determine the decomposition kinetics of F1 and to track the evolution of product gases. The DSC profiles were measured at 10 different heating rates between 0.025°C/min and 10°C/min. The measured exotherms were influenced by F1 melting at heating rates above 0.25°C/min, and corresponding changes in decomposition enthalpy and TGA mass-loss-rate profiles indicated a transition from solid-to-gas decomposition to an increasing contribution from liquid-to-gas decomposition. Analysis of low-heating-rate DSC data between 0.025°C/min and 0.17°C/min with the extended Prout–Tompkins model yielded an activation energy of 305 kJ/mol for solid-to-gas F1 decomposition, higher than previous values inferred from TATB decomposition models involving F1. This study provides the first direct experimental determination of the energy barrier for F1 decomposition. MS measurements showed that the major gaseous products matched species previously reported for TATB decomposition (e.g., CO 2 , HCN, C 2 N 2 , etc.), with water identified as the dominant product. Furthermore, these results provide important experimental constraints for improving chemical kinetics models of TATB decomposition and for predicting the reactivity, stability, and safety of TATB-based high explosives under long-term aging conditions and abnormal thermal environments.

4,6-Diamino-5,7-dinitro-benzo-furazan↗
DOE OSTI2019

Structural and biochemical analysis of the metallo-β-lactamase L1 from emerging pathogen Stenotrophomonas maltophilia revealed the subtle but distinct di-metal scaffold for catalytic activity

Emergence of Enterobacteriaceae harboring metallo-beta-lactamases (MBL) has raised global threats due to their broad antibiotic resistance profiles and the lack of effective inhibitors against them. We have been studied one of the emerging environmental MBL, the L1 from Stenotrophomonas maltophilia K279a . We determined several crystal structures of L1 complexes with three different classes of beta-lactam antibiotics (penicillin G, moxalactam, meropenem, and imipenem), with the inhibitor captopril and different metal ions (Zn +2 , Cd +2 , and Cu +2 ). All hydrolyzed antibiotics and the inhibitor were found binding to two Zn +2 ions mainly through the opened lactam ring and some hydrophobic interactions with the binding pocket atoms. Without a metal ion, the active site is very similarly maintained as that of the native form with two Zn +2 ions, however, the protein does not bind the substrate moxalactam. When two Zn +2 ions were replaced with other metal ions, the same di-metal scaffold was maintained and the added moxalactam was found hydrolyzed in the active site. Differential scanning fluorimetry and isothermal titration calorimetry were used to study thermodynamic properties of L1 MBL compared with New Deli Metallo-beta-lactamase-1 (NDM-1). Both enzymes are significantly stabilized by Zn +2 and other divalent metals but showed different dependency. These studies also suggest that moxalactam and its hydrolyzed form may bind and dissociate with different kinetic modes with or without Zn +2 for each of L1 and NDM-1. Our analysis implicates metal ions, in forming a distinct di-metal scaffold, which is central to the enzyme stability, promiscuous substrate binding and versatile catalytic activity. Statement: The L1 metallo-beta-lactamase from an environmental multidrug-resistant opportunistic pathogen Stenotrophomonas maltophilia K279a has been studied by determining 3D structures of L1 enzyme in the complexes with several beta-lactam antibiotics and different divalent metals and characterizing its biochemical and ligand binding properties. We found that the two-metal center in the active site is critical in the enzymatic process including antibiotics recognition and binding, which explains the enzyme's activity toward diverse antibiotic substrates. This study provides the critical information for understanding the ligand recognition and for advanced drug development.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Localized High–Concentration Electrolytes with Low–Cost Diluents Compatible with Both Cobalt–Free LiNiO 2 Cathode and Lithium–Metal Anode

High-nickel layered oxide cathodes and lithium-metal anode are promising candidates for next-generation battery systems due to their high energy density. Nevertheless, the instability of the electrode–electrolyte interphase is hindering their practical application. Localized high-concentration electrolytes (LHCEs) present a promising solution for achieving uniform lithium deposition and a stable cathode–electrolyte interphase. However, the limited choice of diluents and their high cost are restricting their implementation. Four novel cost-effective diluents and their performance with highly reactive LiNiO 2 cathode and Li-metal anode are reported here. The results show that all the LHCE cells exhibit a Coulombic efficiency of >99.38% in Li | Cu cells and a capacity retention of >85% in Li | LiNiO 2 cells after 250 cycles. Advanced characterizations unveil that the stable cell operation is due to well-tuned electrode–electrolyte interphases and Li deposition morphology. In addition, online electrochemical mass spectroscopy and differential scanning calorimetry reveal that the gas generation and heat-release are greatly reduced with the LHCEs presented. Altogether, the study provides new insights into the role of diluents in LHCEs and offers valuable guidance for further optimization of LHCEs for high energy density lithium-metal batteries.

25 ENERGY STORAGE↗