Search NASA⌕ Search

SEARCH · Search NASA

Results for “Class D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Excitons in 2D Magnets

Theoretical abilities that we built: In our QSGW formalism, the electronic eigenfunctions are calculated self-consistently in presence of the ladder e-h vertex corrections to the screened Coulomb exchange. Charge and self-energies are recalculated iterated until the desired tolerance is achieved in the one-particle Green's function. Further, to include the multi-determinantal (spin-flip structure of multiplets) nature of many body correlations we combine QSGW with DMFT. Below we explore various classes of strongly correlated magnetic systems where excitons are sufficiently described within either the QSGW or the QSGW +DMFT approach. In the process, we establish the digrammatic requirements for a minimum-sufficient theory for describing excitons in large classes of materials.

2D magnets↗
NASA NTRS1988

Wave interactions in a three-dimensional attachment line boundary layer

The 3-D boundary layer on a swept wing can support different types of hydrodynamic instability. Attention is focused on the so-called spanwise contamination problem, which occurs when the attachment line boundary layer on the leading edge becomes unstable to Tollmien-Schlichting waves. In order to gain insight into the interactions important in that problem, a simplified basic state is considered. This simplified flow corresponds to the swept attachment line boundary layer on an infinite flat plate. The basic flow here is an exact solution of the Navier-Stokes equations and its stability to 2-D waves propagating along the attachment can be considered exactly at finite Reynolds number. This has been done in the linear and weakly nonlinear regimes. The corresponding problem is studied for oblique waves and their interaction with 2-D waves is investigated. In fact, oblique modes cannot be described exactly at finite Reynolds number so it is necessary to make a high Reynolds number approximation and use triple deck theory. It is shown that there are two types of oblique wave which, if excited, cause the destabilization of the 2-D mode and the breakdown of the disturbed flow at a finite distance from the leading edge. First, a low frequency mode related to the viscous stationary crossflow mode is a possible cause of breakdown. Second, a class of oblique wave with frequency comparable with that of the 2-D mode is another cause of breakdown. It is shown that the relative importance of the modes depends on the distance from the attachment line.

Hall, Philip↗
DOE OSTI2025

High-Power Targetry R&D Roadmap for High Energy Physics

Designing a reliable target is already a challenge for MW-class facilities today and has led several major accelerator facilities to operate at lower power due to target concerns. With present plans to increase beam power for next-generation accelerator facilities in the next decade, timely R&D in support of robust high-power targets is critical to secure the full physics benefits of ambitious accelerator power upgrades. The next generation of high-power targets and beam-intercepting devices (beam dumps, absorbers, collimators ) will have more complex geometries, novel materials, and new concepts that allow for use of improved high-heat-flux cooling methods. Advanced numerical simulations need to be developed to support design of reliable high-power beam targets. In parallel, development of radiation-hardened beam instrumentation is needed. Irradiation methods for high-power targets must be further developed, and new irradiation facilities are needed since only a few facilities worldwide offer beams suitable for target testing. A comprehensive R&D program must be implemented to address the many complex challenges faced by multi-MW beam intercepting devices.

Pellemoine, Frederique [Fermilab]↗
NASA NTRS1990

Vibration isolation technology: Sensitivity of selected classes of experiments to residual accelerations

The solution was sought of a 2-D axisymmetric moving boundary problem for the sensitivity of isothermal and nonisothermal liquid columns and the sensitivity of thermo-capillary flows to buoyancy driven convection caused by residual accelerations. The sensitivity of a variety of space experiments to residual accelerations are examined. In all the cases discussed, the sensitivity is related to the dynamic response of a fluid. In some cases the sensitivity can be defined by the magnitude of the response of the velocity field. This response may involve motion of the fluid associated with internal density gradients, or the motion of a free liquid surface. For fluids with internal density gradients, the type of acceleration to which the experiment is sensitive will depend on whether buoyancy driven convection must be small in comparison to other types of fluid motion (such as thermocapillary flow), or fluid motion must be suppressed or eliminated (such as in diffusion studies, or directional solidification experiments). The effect of the velocity on the composition and temperature field must be considered, particularly in the vicinity of the melt crystal interface. As far as the response to transient disturbances is concerned the sensitivity is determined by both the magnitude and frequency the acceleration and the characteristic momentum and solute diffusion times.

Alexander, J. Iwan D.↗
NASA NTRS2004

What are the P-type Asteroids Made Of?

The P-type asteroids, together with the D asteroids, had been believed to be one of the most primitive asteroid classes having surface materials rich in carbon and/or organics. Upon a fall of a new type of meteorite, Tagish Lake in 2000, we came to have a possible sample of the D (and/or T) asteroids. In both spectrally and distance from the sun, the P asteroids are located in between the C/G/B/F asteroids and the D asteroids. Because it is believed that the former group are similar to (thermally metamorphosed) CI/CM chondrites and the latter the Tagish Lake meteorite, the surface material of the P asteroids may be understood in combination of those two meteorite groups. Taking that direction, this paper presents possibly the first quantitative characterization of the P asteroids in terms of carbonaceous chondrites and their experimental derivatives.

T. Hiroi↗
NASA NTRS2006

Corporate Social Responsibility in Aviation

The dialog within aviation management education regarding ethics is incomplete without a discussion of corporate social responsibility (CSR). CSR research requires discussion involving: (a) the current emphasis on CSR in business in general and aviation specifically; (b) business and educational theory that provide a basis for aviation companies to engage in socially responsible actions; (c) techniques used by aviation and aerospace companies to fulfill this responsibility; and (d) a glimpse of teaching approaches used in university aviation management classes. The summary of this research suggests educators explain CSR theory and practice to students in industry and collegiate aviation management programs. Doing so extends the discussion of ethical behavior and matches the current high level of interest and activity within the aviation industry toward CSR.

Phillips, Edwin D.↗
DOE OSTI2025

Coherent J/ψ photoproduction at midrapidity in Pb – Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The coherent J∕𝜓 photoproduction cross section is measured for the first time at midrapidity in peripheral to semicentral P b − P b collisions at $\sqrt{s_{NN}}$ = 5.02 TeV. The centrality differential cross section d 𝜎 ∕d𝑦 is reported for the centrality range 40–90%, together with the doubly-differential cross section d 2 𝜎∕d𝑦d𝑝 T , extracted in two peripheral centrality classes. The J∕𝜓 mesons are reconstructed in the dielectron channel, in the rapidity interval |𝑦| < 0.9 using the ALICE central barrel detectors. The J∕𝜓 cross section at midrapidity is statistically compatible to the earlier ALICE measurement at forward rapidity and at the same centre-of-mass energy, and shows only a mild centrality dependence over the covered range. Several sets of theoretical calculations taking into account the hadronic overlap in the collisions but ignoring possible final-state effects from a hot expanding medium are found to give a fairly good description of the current measurements within uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2014

Aeroflex Technology as Class-Y Demonstrator

Modern space field programmable gate array (FPGA) devices with increased functional density and operational frequency, such as Xilinx Virtex 4 (V4) and S (V5), are packaged in non-hermetic ceramic flip chip forms. These next generation space parts were not qualified to the MIL-PRF-38535 Qualified Manufacturer Listing (QML) class-V when they were released because class-V was only intended for hermetic parts. In order to bring Xilinx V5 type packages into the QML system, it was suggested that class-Y be set up as a new category. From 2010 through 2014, a JEDEC G12 task group developed screening and qualification requirements for Class-Y products. The Document Standardization Division of the Defense Logistics Agency (DLA) has completed an engineering practice study. In parallel with the class-Y efforts, the NASA Electronic Parts and Packaging (NEPP) program has funded JPL to study potential reliability issues of the class-Y products. The major hurdle of this task was the absence of adequate research samples. Figure 1-1 shows schematic diagrams of typical structures of class-Y type products. Typically, class-Y products are either in ceramic flip chip column grid array (CGA) or land grid array (LGA) form. In class-Y packages, underfill and heat spread adhesive materials are directly exposed to the spacecraft environment due to their non-hermeticity. One of the concerns originally raised was that the underfill material could degrade due to the spacecraft environment and negatively impact the reliability of the package. In order to study such issues, it was necessary to use ceramic daisy chain flip chip package samples so that continuity of flip chip solder bumps could be monitored during the reliability tests. However, none of the commercially available class-Y daisy chain parts had electrical connections through flip chip solder bumps; only solder columns were daisy chained, which made it impossible to test continuity of flip chip solder bumps without using extremely costly functional parts. Among space parts manufacturers who were interested in producing class-Y products, Aeroflex Microelectronic Solutions-HiRel had been developing assembly processes using their internal R&D classy type samples. In early 2012, JPL and Aeroflex initiated a collaboration to study reliability of the Aeroflex technology as a class-Y demonstrator.

Suh, Jong-ook↗
NASA NTRS1998

The Application of Beowulf-Class Computing to Computational Electromagnetics

Current computational developments at the Jet Propulsion Laboratory (JPL) are motivated by the NASA/JPL goal of reducing payload in future space missions while increasing mission capability through miniaturization of active and passive sensors, analytical instruments and communication systems.

beowulf-class↗
DOE OSTI2025

Optical evolution of AT 2024wpp: the high-velocity outflows in Cow-like transients are consistent with high spherical symmetry

ABSTRACT We present the analysis of optical/near-infrared (NIR) data and host galaxy properties of a bright, extremely rapidly evolving transient, AT 2024wpp, which resembles the enigmatic AT 2018cow. AT 2024wpp rose to a peak brightness of $c=-21.9$ mag in 4.3 d and remained above the half-maximum brightness for only 6.7 d. The blackbody fits to the photometry show that the event remained persistently hot ($T\gtrsim 20\, 000$ K) with a rapidly receding photosphere ($v\sim 11\, 500$ km s$^{-1}$), similarly to AT 2018cow albeit with a several times larger photosphere. $JH$ photometry reveals an NIR excess over the thermal emission at $\sim +20$ d, indicating a presence of an additional component. The spectra are consistent with blackbody emission throughout our spectral sequence ending at $+21.9$ d, showing a tentative, very broad emission feature at $\sim 5500$ Å – implying that the optical photosphere is likely within a near-relativistic outflow. Furthermore, reports of strong X-ray and radio emission cement the nature of AT 2024wpp as a likely Cow-like transient. AT 2024wpp is the second event of the class with optical polarimetry. Our $BVRI$ observations obtained from $+6.1$ to $+14.4$ d show a low polarization of $P\lesssim 0.5$ per cent across all bands, similar to AT 2018cow that was consistent with $P\sim 0$ per cent during the same outflow-driven phase. In the absence of evidence for a preferential viewing angle, it is unlikely that both events would have shown low polarization in the case that their photospheres were aspherical. As such, we conclude that the near-relativistic outflows launched in these events are likely highly spherical, but polarimetric observations of further events are crucial to constrain their ejecta geometry and stratification in detail.

Pursiainen, M.↗
NASA NTRS2003

Interstellar Deuterium Chemistry

The presence of isotopic anomalies is the most unequivocal demonstration that meteoritic material contains circumstellar or interstellar components. In the case of organic compounds in meteorites and interplanetary dust particles (IDPs), the most useful isotopic tracer of interstellar components has been deuterium (D) excesses. In some cases these enrichments are seen in bulk meteoritic materials, but D enrichments have also been observed in meteoritic subfractions and even within specific classes of molecular species, such as amino and carboxylic acids. These anomalies are not thought to be the result of nucleosynthetic processes, but are instead ascribed to chemical and physical processes occurring in the interstellar medium (ISM). The traditional explanation of these D excesses has been to invoke the presence of materials made in the ISM by low temperature gas phase ion-molecule reactions. Indeed, the DM ratios seen in the simple interstellar gas phase molecules in cold dense clouds amenable to measurement using radio spectral techniques are generally considerably higher than the values seen in enriched Solar System materials. However, the true linkage between the DM ratios in interstellar and meteoritic materials is obscured by several effects. First, current observations of D enrichment in the ISM have been made of only a few simple molecules, molecules that are not the main carriers of D in Solar System materials. Second, some of the interstellar D enrichment is likely to reside on labile moieties that will have exchanged to some degree with more isotopically normal material during incorporation into the warm protosolar nebula, parent body processing, delivery, recovery, and analysis. Third, ion-molecule reactions represent only one of at least four processes that can produce strong D-H fractionation in the ISM.

Sandford, S. A.↗
DOE OSTI2024

Designing phase sensitive probes of monopole superconducting order

Distinct from familiar s-, p-, or d-wave pairings, the monopole superconducting order represents a novel class of pairing order arising from nontrivial monopole charge of the Cooper pair. In the weak-coupling regime, this order can emerge when pairing occurs between Fermi surfaces with different Chern numbers in, for example, doped Weyl semimetal systems. However, the phase of monopole pairing order is not well-defined over an entire Fermi surface, making it challenging to design experiments sensitive to both its symmetry and topology. To address this, we propose a scheme based on symmetry and topological principles to identify this elusive pairing order through a set of phase-sensitive Josephson experiments. By examining the discrepancy between global and local angular momentum of the pairing order, we can unveil the monopole charge of the pairing order, including for models with higher pair monopole charge |q p |=1,2, and 3. We demonstrate the proposed probe of monopole pairing order through analytic and numerical studies of Josephson coupling in models of monopole superconductor junctions. This work opens a promising avenue to uncover the unique topological properties of monopole pairing orders and to distinguish them from known pairing orders based on spherical harmonic symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Dwarfs Cooler Than M: The Definition of Spectral Type L Using Discoveries from the 2-Micron All-Sky Survey (2MASS)

Before the 2-Micron All-Sky Survey (2MASS) began, only six objects were known with spectral types later than M9.5 V. In the first 371 sq. deg. of actual 2MASS survey data, we have identified another twenty such objects spectroscopically confirmed using the Low Resolution Imaging Spectrograph (LRIS) at the W.M. Keck Observatory.

class T low mass brown dwarf stellar atmosphere 2-↗
NASA NTRS2013

Organic Contamination Baseline Study: In NASA JSC Astromaterials Curation Laboratories. Summary Report

In preparation for OSIRIS-REx and other future sample return missions concerned with analyzing organics, we conducted an Organic Contamination Baseline Study for JSC Curation Labsoratories in FY12. For FY12 testing, organic baseline study focused only on molecular organic contamination in JSC curation gloveboxes: presumably future collections (i.e. Lunar, Mars, asteroid missions) would use isolation containment systems over only cleanrooms for primary sample storage. This decision was made due to limit historical data on curation gloveboxes, limited IR&D funds and Genesis routinely monitors organics in their ISO class 4 cleanrooms.

Calaway, Michael J.↗