Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collision”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Helicopter Pilot Evaluations of the Airborne Collision Avoidance System Xr in a High-Fidelity Motion Simulation

New aircraft and aerial Urban Air Mobility operations require updated technologies to maintain vehicle separation during flight. Specifically, higher-density airspace will need more than traditional air traffic control to keep vehicles well clear of each other and avoid Near Midair Collisions. In response, the Federal Aviation Administration is currently developing the Airborne Collision Avoidance System X (ACAS X) for next-generation air traffic deconfliction, which provides caution-level and warning-level alerts in response to multiple aircraft types. This study recruited six helicopter pilots to fly an electric vertical takeoff and landing vehicle model in simulated operations under Visual Flight Rules (VFR). Flights were accomplished using the high-fidelity Vertical Motion Simulator at the NASA Ames Research Center. Participants controlled the vehicle using two side inceptors and foot rudders. The rotorcraft variant of ACAS X (ACAS Xr) was provided for alerting and guidance during traffic conflicts. Pilots used this system while giving feedback to the researchers through questionnaires, debriefs, and other discussions. Variables of interest to the study were phases of flight (i.e., Cruise, Hover, and Approach) and ACAS Xr configurations: The Collision Avoidance System configuration behaves similarly to current commercial traffic systems used for tactical deconfliction in crewed vehicles, and the Detect and Avoid configuration was developed to provide extra, corrective-level guidance for unmanned aircraft systems. Results showed that pilots found the alerting and guidance from ACAS Xr useful, effective, and acceptable for VFR operations. Certain elements, like speed guidance and text banners, were found to be of no use to the pilots. Hover and Approach scenarios were considered the most difficult for ACAS Xr alerting. Reasons for this difficulty were partially due to learning interference (i.e., overcoming previously learned behavior) and partially due to the vehicle model (i.e., NASA’s Lift Plus Cruise design). Still, alerting-based confounds reveal the need for more development for ACAS Xr during these Hover and Approach flight phases. Study caveats and future projects are discussed.

air taxis↗
NASA NTRSDate not supplied

Helicopter Pilot Evaluations of the Airborne Collision Avoidance System Xr in a High-Fidelity Motion Simulation

New aircraft and aerial Urban Air Mobility operations require updated technologies to maintain vehicle separation during flight. Specifically, higher-density airspace will need more than traditional air traffic control to keep vehicles well clear of each other and avoid Near Midair Collisions. In response, the Federal Aviation Administration is currently developing the Airborne Collision Avoidance System X (ACAS X) for next-generation air traffic deconfliction, which provides caution-level and warning-level alerts in response to multiple aircraft types. This study recruited six helicopter pilots to fly an electric vertical takeoff and landing vehicle model in simulated operations under Visual Flight Rules (VFR). Flights were accomplished using the high-fidelity Vertical Motion Simulator at the NASA Ames Research Center. Participants controlled the vehicle using two side inceptors and foot rudders. The rotorcraft variant of ACAS X (ACAS Xr) was provided for alerting and guidance during traffic conflicts. Pilots used this system while giving feedback to the researchers through questionnaires, debriefs, and other discussions. Variables of interest to the study were phases of flight (i.e., Cruise, Hover, and Approach) and ACAS Xr configurations: The Collision Avoidance System configuration behaves similarly to current commercial traffic systems used for tactical deconfliction in crewed vehicles, and the Detect and Avoid configuration was developed to provide extra, corrective-level guidance for unmanned aircraft systems. Results showed that pilots found the alerting and guidance from ACAS Xr useful, effective, and acceptable for VFR operations. Certain elements, like speed guidance and text banners, were found to be of no use to the pilots. Hover and Approach scenarios were considered the most difficult for ACAS Xr alerting. Reasons for this difficulty were partially due to learning interference (i.e., overcoming previously learned behavior) and partially due to the vehicle model (i.e., NASA’s Lift Plus Cruise design). Still, alerting-based confounds reveal the need for more development for ACAS Xr during these Hover and Approach flight phases. Study caveats and future projects are discussed.

air taxis↗
NASA NTRS2002

Efficient sensor/model based on-line collision detection for planetary manipulators

We present an algorithm that uses the Oriented Bounding Box (OBB) and a new primitive called the Oriented Bounding Prism (OBP) to detect potential self-collisions and collisions with terrain object sensed with the rover's on-board stereo camera; the algorithm thus has both model-based and sensor-based components.

rovers manipulation collision detection FIDO↗
NASA NTRS2016

A Collision Avoidance Strategy for a Potential Natural Satellite around the Asteroid Bennu for the OSIRIS-REx Mission

The cadence of proximity operations for the OSIRIS-REx mission may have an extra induced challenge given the potential of the detection of a natural satellite orbiting the asteroid Bennu. Current ground radar observations for object detection orbiting Bennu show no found objects within bounds of specific size and rotation rates. If a natural satellite is detected during approach, a different proximity operation cadence will need to be implemented as well as a collision avoidance strategy for mission success. A collision avoidance strategy will be analyzed using the Wald Sequential Probability Ratio Test.

satellite↗
NASA NTRS2016

A Collision Avoidance Strategy for a Potential Natural Satellite Around the Asteroid Bennu for the OSIRIS-REx Mission

The cadence of proximity operations for the OSIRIS-REx mission may have an extra induced challenge given the potential of the detection of a natural satellite orbiting the asteroid Bennu. Current ground radar observations for object detection orbiting Bennu show no found objects within bounds of specific size and rotation rates. If a natural satellite is detected during approach, a different proximity operation cadence will need to be implemented as well as a collision avoidance strategy for mission success. A collision avoidance strategy will be analyzed using the Wald Sequential Probability Ratio Test.

bennu↗
NASA NTRS2017

Earth Observing System (EOS) Aqua & Aura Space Weather Effects on Operational Collision Avoidance

This presentation will describe recent EOS Aqua and Aura operational collision avoidance experience during periods of solar and geomagnetic storm activity. It will highlight challenges faced by the operations team during short-notice, high-risk predicted close approaches. The presentation will highlight the evolution of the operational collision avoidance process for the EOS Aqua and Aura missions. The presentation will highlight operational challenges that have occurred, process improvements that have been implemented and identify potential future challenges.

Operational collision avoidance↗
NASA NTRS2018

An Interoperability Concept for Detect and Avoid and Collision Avoidance Systems: Results from a Human-In-The-Loop Simulation

The integration of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS) poses a variety of technical challenges to UAS developers and aviation regulators. In response to growing demand for access to civil airspace in the United States, the Federal Aviation Administration (FAA) has produced a roadmap identifying key areas requiring further research and development. One such technical challenge is the development of a "detect and avoid" system (DAA) capable of providing a means of compliance with the "see and avoid" requirement in manned aviation. The purpose of the DAA system is to support the pilot, situated at a ground control station (GCS), in maintaining "DAA well clear" of nearby aircraft through the use of GCS displays and alerts. In addition to its primary function of aiding the pilot in maintaining well clear, the DAA system must also safely interoperate with existing NAS systems and operations, such as the airspace management procedures of air traffic controllers (ATC) and Collision Avoidance (CA) systems currently in use by manned aircraft, namely the Traffic alert and Collision Avoidance System (TCAS) II. It is anticipated that many UAS architectures will integrate both a DAA system and a TCAS II. It is therefore necessary to explicitly study the integration of DAA and TCAS II alerting structures and maneuver guidance formats to ensure that pilots understand the appropriate type and urgency of their response to the various alerts. This paper presents a concept of interoperability for the two systems. The concept was developed with the goal of avoiding any negative impact on the performance level of TCAS II while retaining a DAA system that still effectively enables pilots to maintain DAA well clear.

unmanned aircraft systems↗
NASA NTRS2018

Automated Collision Avoidance (ACA) and Automated Return to Course (ARTC) Requirement and Guidance Review: Final

This report's objectives were to review regulatory and guidance documents to identify requirements and considerations for the design and operation of automated systems that perform the functions of automated collision avoidance (ACA) and/or automated return to course (ARTC). The importance of this work is twofold: 1) to help focus efforts addressing new automated collision avoidance and return to course systems requirements and considerations, and 2) in pulling together available requirements from multiple sources, generate a master resource for these automated system requirements and considerations. Reviewed documents include regulations, industry standards and research papers that specifically address ACA and ARTC systems, other automatedl control and guidance systems, ICAO (International Civil Aviation Organization) and Eurocontrol documents.

Automation↗
NASA NTRS1998

Disruption of Kilometer-Sized Asteroids by Energetic Collisions

Past collisions determine the current mechanical properties of asteroids, and hence their response to future collisions. To understand the evolution of their diverse shapes, structures and spin states, we model hypervelocity impacts into small asteroids using a modern 3D smooth-particle hydrocode (SPH3D) that takes material strength and fracture into account.

Asteroids↗
NASA NTRSDate not supplied

Adaptive Stress Testing of Collision Avoidance Systems for Small UASs with Deep Reinforcement Learning

The next-generation Airborne Collision Avoidance System for smaller UASs (ACAS sXu) is currently being developed and tested by the Federal Aviation Administration (FAA) to provide detect-and-avoid capability for small unmanned aircraft operating beyond line-of-sight. Due to the complexity and safety-critical nature of the system, safety validation is important not only for the certification of the final system, but also for informing changes during the iterative development process. In this paper, we analyze a prototype of ACAS sXu in simulated aircraft encounters to discover scenarios of small near mid-air collisions (sNMACs), an important safety event in which two aircraft come closer than 50 feet horizontally and 15 feet vertically. Due to the size and complexity of the system as well as rarity of sNMAC events, traditional methods such as Monte Carlo testing often require informed setup and targeting to elicit failures. However, such a dependence on domain knowledge can be incompatible with the independent verification and validation (IV&V) process, the aim of which is to discover unforeseen issues. To address these challenges, we apply an accelerated validation method called adaptive stress testing (AST) to find the most likely sNMAC scenarios without reliance on system introspection. AST uses reinforcement learning to adapt the search towards the most promising areas of the search space as it progresses. We use a state-of-the-art deep reinforcement learning algorithm, proximate policy optimization, to more efficiently search the large and continuous state space. We find that this approach significantly improves the performance of AST compared to a prior approach based on Monte Carlo tree search. We perform experiments using AST to find sNMAC events under various encounter configurations, varying parameters pertaining to dynamics and coordination. Our experiments show AST to be very effective at finding sNMAC scenarios. We summarize our findings, presenting high-level categories of discovered sNMACs and specific examples of encounters in each category.

aircraft collision avoidance↗
NASA NTRS2022

Limitations of Separate Cloud and Rain Categories in Parameterizing Collision-Coalescence for Bulk Microphysics Schemes

Warm rain collision-coalescence has been persistently difficult to parameterize in bulk microphysics schemes. We use a flexible bulk microphysics scheme with bin scheme process parameterizations, called AMP, to investigate reasons for the difficulty. AMP is configured in a variety of ways to mimic bulk schemes and is compared to simulations with the bin scheme upon which AMP is built. We find that an important limitation in traditional bulk schemes is the use of separate cloud and rain categories. When the drop size distribution is instead represented by a continuous distribution, the simulation of cloud-to-rain conversion is substantially improved. We also find large sensitivity to the threshold size to distinguish cloud and rain in traditional schemes; substantial improvement is found by decreasing the threshold from 40 to 25 μm. Neither the use of an assumed functional form for the size distribution nor the choice of predicted distribution moments has a large impact on the ability of AMP to simulate rain production. When predicting four total moments of the liquid drop size distribution, either with a traditional two-category, two-moment scheme with a reduced size threshold, or a four-moment single-category scheme, errors in the evolution of mass and the cloud size distribution are similar, but the single-category scheme has a substantially better representation of the rain size distribution. Optimal moment combinations for the single-category approach are investigated and appear to be linked more to the information content they provide for constraining the size distributions than to their correlation with collision-coalescence rates.

autoconversion↗
NASA NTRSDate not supplied

Decision Support Tool for Risk Assessment & Maneuver Planning in Collision Avoidance

As the quantity of orbital debris continues to grow, so too does the rate of conjunction messages that suggest possible collisions between high value payloads and debris. The abundance of these conjunction messages, and eventual misses, has led to a culture of ignored alerts, and an increase in satellite operation costs as a result of the frequent need to plan resources for maneuver planning and execution. The loss of “trust” in conjunction alerts is due to the poorly characterized evolution in probability of collision (Pc) as time approaches the time of closest approach (TCA) between two objects, as well as the interpretation of Pc in the context of maneuver planning. To address these problems, and in collaboration with the NASA Conjunction Assessment Risk Analysis (CARA) program, the Industrial Sciences Group has developed a novel Maneuver Decision Support System (MDSS) to assist satellite operations in conjunction assessment and Maneuver planning. It provides a meaningful and intuitive Urgency metric for actionable maneuver decisions, based on the physical dynamics of conjunctions. It is based on a forecast of the evolution of Pc over time and represents an advance over current methods that are in use for satellite conjunction monitoring and planning. The result is to give satellite operators a validated decision support systems to plan for maneuver execution or mitigation or monitoring up to 3 days before TCA.

Decision Support Tool↗
NASA NTRSDate not supplied

Setting the Bar for the Replacement of the Probability of Collision Metric

Recent research in satellite conjunction risk assessment has levelled a number of criticisms at the probability of collision (Pc) parameter as a durable statement of satellite collision likelihood, and a number of different alternatives to this calculation have been proposed. Many of these proposals, however, stop at the outlining of the theory and do not discuss the additional philosophical and practical issues that must be confronted in evaluating such proposals for adoption. The present work seeks to outline some of these philosophical and practical considerations, and therefore the kinds of analyses and profiling that will be needed before the Pc, which is at present nearly universally adopted in the conjunction risk mitigation community, can be replaced with a new (and superior) paradigm and associated metric.

conjunction assessment↗