HDTN Overview for IEEE Workshop on Optimizing Interplanetary Communication Through Network Autonomy
Explore the source record for details and available documents.
Daniel Raible↗
SEARCH · Search NASA
Results for “Communication networks”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
On Proper Selection of Multihop Relays for Future Enhancement of AeroMACS Networks
As the Aeronautical Mobile Airport Communications System (AeroMACS) has evolved from a technology concept to a deployed communications network over major US airports, it is now time to contemplate whether the existing capacity of AeroMACS is sufficient to meet the demands set forth by all fixed and mobile applications over the airport surface given the AeroMACS constraints regarding bandwidth and transmit power. The underlying idea in this article is to present IEEE 802.16j-based WiMAX as a technology that can address future capacity enhancements and therefore is most feasible for AeroMACS applications. The principal argument in favor IEEE 802.16j technology is the flexible and cost effective extension of radio coverage that is afforded by relay fortified networks, with virtually no increase in the power requirements and virtually no rise in interference levels to co-allocated applications. The IEEE 802.16j-based multihop relay systems are briefly described. The focus is on key features of this technology, frame structure, and its architecture. Next, AeroMACS is described as a WiMAX-based wireless network. The two major relay modes supported by IEEE 802.16j amendment, i.e., transparent and non-transparent are described. The benefits of employing multihop relays are listed. Some key challenges related to incorporating relays into AeroMACS networks are discussed. The selection of relay type in a broadband wireless network affects a number of network parameters such as latency, signal overhead, PHY (Scalable Physical Layer) and MAC (Media Access Layer) layer protocols, consequently it can alter key network quantities of throughput and QoS (Quality of Service).
aircraft communications↗
Reconfigurable Robust Routing for Mobile Outreach Network
The Reconfigurable Robust Routing for Mobile Outreach Network (R3MOO N) provides advanced communications networking technologies suitable for the lunar surface environment and applications. The R3MOON techn ology is based on a detailed concept of operations tailored for luna r surface networks, and includes intelligent routing algorithms and wireless mesh network implementation on AGNC's Coremicro Robots. The product's features include an integrated communication solution inco rporating energy efficiency and disruption-tolerance in a mobile ad h oc network, and a real-time control module to provide researchers an d engineers a convenient tool for reconfiguration, investigation, an d management.
Lin, Ching-Fang↗
Space Communication and Navigation SDR Testbed, Overview and Opportunity for Experiments
NASA has developed an experimental flight payload (referred to as the Space Communication and Navigation (SCAN) Test Bed) to investigate software defined radio (SDR) communications, networking, and navigation technologies, operationally in the space environment. The payload consists of three software defined radios each compliant to NASAs Space Telecommunications Radio System Architecture, a common software interface description standard for software defined radios. The software defined radios are new technology developments underway by NASA and industry partners launched in 2012. The payload is externally mounted to the International Space Station truss to conduct experiments representative of future mission capability. Experiment operations include in-flight reconfiguration of the SDR waveform functions and payload networking software. The flight system will communicate with NASAs orbiting satellite relay network, the Tracking and Data Relay Satellite System at both S-band and Ka-band and to any Earth-based compatible S-band ground station. The system is available for experiments by industry, academia, and other government agencies to participate in the SDR technology assessments and standards advancements.
Reinhart, Richard C.↗
Analysis of NASA communications (Nascom) II network protocols and performance
The NASA Communications (Nascom) Division of the Mission Operations and Data Systems Directorate is to undertake a major initiative to develop the Nascom II (NII) network to achieve its long-range service objectives for operational data transport to support the Space Station Freedom Program, the Earth Observing System, and other projects. NII is the Nascom ground communications network being developed to accommodate the operational traffic of the mid-1990s and beyond. The authors describe various baseline protocol architectures based on current and evolving technologies. They address the internetworking issues suggested for reliable transfer of data over heterogeneous segments. They also describe the NII architecture, topology, system components, and services. A comparative evaluation of the current and evolving technologies was made, and suggestions for further study are described. It is shown that the direction of the NII configuration and the subsystem component design will clearly depend on the advances made in the area of broadband integrated services.
Omidyar, Guy C.↗
Applications of Time-Reversal Processing for Planetary Surface Communications
Due to the power constraints imposed on wireless sensor and communication networks deployed on a planetary surface during exploration, energy efficient transfer of data becomes a critical issue. In situations where groups of nodes within a network are located in relatively close proximity, cooperative communication techniques can be utilized to improve the range, data rate, power efficiency, and lifetime of the network. In particular, if the point-to-point communication channels on the network are well modeled as frequency non-selective, distributed or cooperative beamforming can employed. For frequency-selective channels, beamforming itself is not generally appropriate, but a natural generalization of it, time-reversal communication (TRC), can still be effective. Time-reversal processing has been proposed and studied previously for other applications, including acoustical imaging, electromagnetic imaging, underwater acoustic communication, and wireless communication channels. In this paper, we study both the theoretical advantages and the experimental performance of cooperative TRC for wireless communication on planetary surfaces. We give a brief introduction to TRC and present several scenarios where TRC could be profitably employed during planetary exploration. We also present simulation results illustrating the performance of cooperative TRC employed in a complex multipath environment and discuss the optimality of cooperative TRC for data aggregation in wireless sensor networks
Barton, Richard J.↗
File Transfer in the Deep Space Environment: Issues, Desirable Features, and Protocol Design
In this paper, the author presents a proposed file transfer protocol tailored to the unique characteristics of deep space missions and their communications networks.
file transfer protocol deep space missions communi↗
Space network support for lunar communications
The space network can provide high data rate lunar communications as an alternative or adjunct to an expansion of the deep space network. Use of a space-based system can provide continuous coverage for lunar users and reduce terrestrial communication costs by delivering data directly to a single domestic location. Adapting the space network for lunar communications support would also maximize the use of the existing and planned space network and Space Station infrastructure. Several alternative architectures are evaluated.
Jordan, Michael A.↗
Space Link Extension Protocol Emulation for High-Throughput, High-Latency Network Connections
New space missions require higher data rates and new protocols to meet these requirements. These high data rate space communication links push the limitations of not only the space communication links, but of the ground communication networks and protocols which forward user data to remote ground stations (GS) for transmission. The Consultative Committee for Space Data Systems, (CCSDS) Space Link Extension (SLE) standard protocol is one protocol that has been proposed for use by the NASA Space Network (SN) Ground Segment Sustainment (SGSS) program. New protocol implementations must be carefully tested to ensure that they provide the required functionality, especially because of the remote nature of spacecraft. The SLE protocol standard has been tested in the NASA Glenn Research Center's SCENIC Emulation Lab in order to observe its operation under realistic network delay conditions. More specifically, the delay between then NASA Integrated Services Network (NISN) and spacecraft has been emulated. The round trip time (RTT) delay for the continental NISN network has been shown to be up to 120ms; as such the SLE protocol was tested with network delays ranging from 0ms to 200ms. Both a base network condition and an SLE connection were tested with these RTT delays, and the reaction of both network tests to the delay conditions were recorded. Throughput for both of these links was set at 1.2Gbps. The results will show that, in the presence of realistic network delay, the SLE link throughput is significantly reduced while the base network throughput however remained at the 1.2Gbps specification. The decrease in SLE throughput has been attributed to the implementation's use of blocking calls. The decrease in throughput is not acceptable for high data rate links, as the link requires constant data a flow in order for spacecraft and ground radios to stay synchronized, unless significant data is queued a the ground station. In cases where queuing the data is not an option, such as during real time transmissions, the SLE implementation cannot support high data rate communication.
Computer Networking↗
Robust Routing Protocol For Digital Messages
Refinement of ditigal-message-routing protocol increases fault tolerance of polled networks. AbNET-3 is latest of generic AbNET protocols for transmission of messages among computing nodes. AbNET concept described in "Multiple-Ring Digital Communication Network" (NPO-18133). Specifically aimed at increasing fault tolerance of network in broadcast mode, in which one node broadcasts message to and receives responses from all other nodes. Communication in network of computers maintained even when links fail.
Marvit, Maclen↗
Three-Receiver Quantum Broadcast Channels: Classical Communication with Quantum Non-unique Decoding
In network communication, it is common in broadcasting scenarios for there to exist a hierarchy among receivers based on information they decode due, for example, to different physical conditions or premium subscriptions. This hierarchy may result in varied information quality, such as higher-quality video for certain receivers. This is modeled mathematically as a degraded message set, indicating a hierarchy between messages to be decoded by different receivers, where the default quality corresponds to a common message intended for all receivers, a higher quality is represented by a message for a smaller subset of receivers, and so forth. We extend these considerations to quantum communication, exploring three-receiver quantum broadcast channels with two- and three-degraded message sets. Our technical tool involves employing quantum non-unique decoding, a technique we develop by utilizing the simultaneous pinching method. Here, we construct one-shot codes for various scenarios and find achievable rate regions relying on various quantum Rényi mutual information error exponents. Our investigation includes a comprehensive study of pinching across tensor product spaces, presenting our findings as the asymptotic counterpart to our one-shot codes. By employing the non-unique decoding, we also establish a simpler proof to Marton’s inner bound for two-receiver quantum broadcast channels without the need for more involved techniques. Additionally, we derive no-go results and demonstrate their tightness in special cases.
Salek, Farzin [Technical University of Munich (Ger↗
A real time, low cost, data acquisition telecommunication network
The real time, low cost data acquisition communication network described features the use of asynchronous ASCII code transmissions operating at 30 characters per second on the dial-up telephone system. The network features an elaborate, but easily generated error checking system, operating in a line-by-line demand-response mode. The system is readily adaptable for any low speed computer-to-computer data transmissions requiring high reliability in data transmission. The network was developed for the acquisition of prelaunch wind data from the Eastern Test Range at Cape Kennedy.
Schulte, R. R.↗
Telecommunications network optimization
Analysis discusses STACOM (state criminal justic communication) network topology program used to design and evaluate digital telecommunications networks STACOM employs ESAU-WILLIAMS technique to search for direct links between system terminations and regional switching center. Inputs include traffic data, terminal locations, and functional requirements.
Lee, J.↗
Traffic sharing algorithms for hybrid mobile networks
In a hybrid (terrestrial + satellite) mobile personal communications networks environment, a large size satellite footprint (supercell) overlays on a large number of smaller size, contiguous terrestrial cells. We assume that the users have either a terrestrial only single mode terminal (SMT) or a terrestrial/satellite dual mode terminal (DMT) and the ratio of DMT to the total terminals is defined gamma. It is assumed that the call assignments to and handovers between terrestrial cells and satellite supercells take place in a dynamic fashion when necessary. The objectives of this paper are twofold, (1) to propose and define a class of traffic sharing algorithms to manage terrestrial and satellite network resources efficiently by handling call handovers dynamically, and (2) to analyze and evaluate the algorithms by maximizing the traffic load handling capability (defined in erl/cell) over a wide range of terminal ratios (gamma) given an acceptable range of blocking probabilities. Two of the algorithms (G & S) in the proposed class perform extremely well for a wide range of gamma.
Arcand, S.↗
Multi-Spacecraft Autonomous Positioning System
As the number of spacecraft in simultaneous operation continues to grow, there is an increased dependency on ground-based navigation support. The current baseline system for deep space navigation utilizes Earth-based radiometric tracking, requiring long-duration observations to perform orbit determination and generate a state update. The age, complexity, and high utilization of the ground assets pose a risk to spacecraft navigation performance. In order to perform complex operations at large distances from Earth, such as extraterrestrial landing and proximity operations, autonomous systems are required. With increasingly complex mission operations, the need for frequent and Earth-independent navigation capabilities is further reinforced. The Multi-spacecraft Autonomous Positioning System (MAPS) takes advantage of the growing interspacecraft communication network and infrastructure to allow for Earth-autonomous state measurements to enable network-based space navigation. A notional concept of operations is given in figure 1. This network is already being implemented and routinely used in Martian communications through the use of the Mars Reconnaissance Orbiter and Mars Odyssey spacecraft as relays for surface assets. The growth of this communications architecture is continued through MAVEN, and future potential commercial Mars telecom orbiters. This growing network provides an initial Marslocal capability for inter-spacecraft communication and navigation. These navigation updates are enabled by cross-communication between assets in the network, coupled with onboard navigation estimation routines to integrate packet travel time to generate ranging measurements. Inter-spacecraft communication allows for frequent state broadcasts and time updates from trusted references. The architecture is a software-based solution, enabling its implementation on a wide variety of current assets, with the operational constraints and measurement accuracy determined by onboard systems.
Anzalone, Evan↗
A variable bandwidth assignment scheme for the Land Mobile Satellite experiment
The Mobile Satellite Experiment is a proposed experimental satellite-based communications network which provides data and voice communications to mobile terminals dispersed in geographically dispersed areas. In this paper, an analytical model is developed to calculate the performance of a Variable Bandwidth Assignment (VBA) Scheme. Under this scheme, the satellite channel bandwidth is dynamically reassigned so that a message may be transmitted in the shortest possible time. To transmit a long message, message channels will be reconfigured to have more bandwidth such that the transmission time is reduced, while to transmit a short message, the channel bandwidth will be shrunk such that the released bandwidth can be used to serve other messages. The model is illustrated with numerical examples. It is shown that a VBA scheme can achieve considerable improvement in transmission delays over a Fixed Bandwidth Assignment Scheme.
Yan, T.-Y.↗
Direct sequence spread spectrum CDMA in shared spectrum applications
Personal Communication Network (PCN) is an entirely wireless communication system with the capability of assessing the wired telephone system to reach anyone processing only a wired telephone. It is expected to compete with the existing mobile cellular system which connects directly to the wired telephone system. While many PCN systems employ TDMA technology, the PCN system described here uses Broadband CDMA (BCDMA(sup SM)) which is capable of sharing the spectrum with other users and which is extremely resistant to fading caused by multipath.
Schilling, Donald L.↗
Optical Interconnection Via Computer-Generated Holograms
Method of free-space optical interconnection developed for data-processing applications like parallel optical computing, neural-network computing, and switching in optical communication networks. In method, multiple optical connections between multiple sources of light in one array and multiple photodetectors in another array made via computer-generated holograms in electrically addressed spatial light modulators (ESLMs). Offers potential advantages of massive parallelism, high space-bandwidth product, high time-bandwidth product, low power consumption, low cross talk, and low time skew. Also offers advantage of programmability with flexibility of reconfiguration, including variation of strengths of optical connections in real time.
Liu, Hua-Kuang↗