Search NASA⌕ Search

SEARCH · Search NASA

Results for “Composition B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Alloy composition effects on oxidation products of VIA, B-1900, 713C, and 738X: A high temperature diffractometer study

High temperature X-ray diffraction studies were performed to investigate isothermal and cyclic oxidation at 1000 and 1100 C of the nickel-base superalloys VIA, B-1900, 713C, and 738X. Oxidation was complex. The major oxides, Al2O3, Cr2O3, and the spinels, formed in amounts consistent with alloy chemistry. The alloys VIA and B-1900 (high Al, low Cr alloys) tended to form Al2O3 and NiAl2O4; 738X (high Cr, low Al) formed Cr2O3 and NiCr2O4. A NiTa2O6 type of oxide formed in amounts approximately proportional to the refractory metal content of the alloy. One of the effects of cycling was to increase the amount of spinels formed.

Garlick, R. G.↗

Fassaite composition trends during crystallization of Allende Type B refractory inclusion melts

Major-, minor-, and trace-element zoning trends in fassaite from Type B1 and B2 inclusions from the Allende meteorite are defined by using electron and ion microprobe data. Fassaite/liquid distribution coefficients are calculated for many of the lithophile elements, and evidence for and against the presence of relict fassaite in these inclusions is discussed. Major-element zoning in fassaite in Type B CAIs is found from Ti-, V-, Sc-rich cores to relatively Mg-, Si-rich rims. Trace elements that are incompatible in this fassaite are Nb (effective fassaite/liquid distribution = 0.29), Y(0.52), Ta(0.34), Th(0.053), U(0.4), and rare earth elements (0.31-0.48), while compatible trace elements are Zr(1.1) and Hf(1.5). Rare-earth-elements (RRE) abundances in fassaite are found to be controlled by crystal/liquid fractionation. Candidates for relict fassaite grains are discovered: Ti-, Sc-rich, REE-poor crystals enclosed in melilite in the mantle of TS34.

Simon, Steven B.↗

Experimental and Petrological Constraints on Lunar Differentiation from the Apollo 15 Green Picritic Glasses

Phase equilibrium experiments on the most magnesian Apollo 15C green picritic glass composition indicate a multiple saturation point with olivine and orthopyroxene at 1520 C and 1.3 GPa (about 260 km depth in the moon). This composition has the highest Mg# of any lunar picritic glass and the shallowest multiple saturation point. Experiments on an Apollo 15A composition indicate a multiple saturation point with olivine and orthopyroxene at 1520 C and 2.2 GPa (about 440 km depth in the moon). The importance of the distinctive compositional trends of the Apollo 15 groups A, B, and C picritic glasses merits the reanalysis of NASA slide 15426,72 with modern electron microprobe techniques. We confirm the compositional trends reported by Delano (1979, 1986) in the major element oxides SiO2, TiO2, Al2O3, Cr2O3, FeO, MnO, MgO, and CaO, and we also obtained data for the trace elements P2O5, K2O, Na2O, NiO, S, Cu, Cl, Zn, and F. Petrogenetic modeling demonstrates that the Apollo 15 A-B-C glass trends could not have been formed by fractional crystallization or any continuous assimilation/fractional crystallization (AFC) process. The B and C glass compositional trends could not have been formed by batch or incremental melting of an olivine + orthopyroxene source or any other homogeneous source, though the A glasses may have been formed by congruent melting over a small pressure range at depth. The B compositional trend is well modeled by starting with an intermediate A composition and assimilating a shallower, melted cumulate, and the C compositional trend is well modeled by a second assimilation event. The assimilation process envisioned is one in which heat and mass transfer were separated in space and time. In an initial intrusive event, a picritic magma crystallized and provided heat to melt magma ocean cumulates. In a later replenishment event, the picritic magma incrementally mixed with the melted cumulate (creating the compositional trends in the green glass data set), ascended to the lunar surface, and erupted as a fire fountain. A barometer created from multiple saturation points provides a depth estimate of other glasses in the A-B-C trend and of the depths of assimilation. This barometer demonstrates that the Apollo 15 A-B-C trend originated over a depth range of approx.460 km to approx.260 km within the moon.

Elkins-Tanton, Linda T.↗

The chemical composition of ρ puppis and the signs of accretion in the atmospheres of B–F-type stars

We investigated the chemical composition of ρ Pup using high-resolution spectral observations taken from the Very Large Telescope and the IUE archives and also spectra obtained at the 1.8 m telescope of the Bohyunsan observatory in Korea. The abundances of 56 chemical elements and the upper limits of Li and Be abundances were determined. The abundance pattern of ρ Pup was found to be similar to that of Am-type stars. The possibility of the influence of the accretion of interstellar gas and dust on the abundance patterns of B–F-type stars is discussed. The plots of the relative abundances of chemical elements in the atmospheres of ρ Pup and δ Sct versus the second ionization potentials of these elements show the correlations. The discontinuities at 13.6 and 24.6 eV—the ionization potentials of hydrogen and helium, respectively, are also exhibited in these plots. These discontinuities can be explained by interaction of the atoms of interstellar gas, mainly hydrogen and helium atoms, with the atoms of stellar photospheres (so-called charge-exchange reactions). Note that only the jumps near 13.6 and 24.6 eV were pointed out in previous investigations of relative abundances versus the second ionization potentials for Am-type stars. The dependencies of the relative abundances of chemical elements on the second ionization potentials of these elements were investigated using the published abundance patterns of B–F-type stars. The correlations of relative and absolute abundances of chemical elements, second ionization potentials, and projected rotational velocities are clearly detected for stars with effective temperatures between 7,000 and 12,000 K. If the correlation of relative abundances and second ionization potentials can be explained by the accretion of interstellar gas on the stellar surfaces, the investigation of these correlations can provide valuable information on the density and velocities of interstellar gas in different regions of the Galaxy and also on the influence of this phenomenon on stellar evolution. The dependencies of the relative abundances of chemical elements on the condensation temperatures of these elements were also found in the atmospheres of ρ Pup, δ Sct, and other B–F-type stars. Ten possible λ Boo-type stars were detected. The effective temperatures of these objects are between 10,900 and 14,000 K.

79 ASTRONOMY AND ASTROPHYSICS↗

Synergistic stabilization of metastable Fe{sub 23}B{sub 6} and γ-Fe in undercooled Fe{sub 83}B{sub 17}

Previous investigations of undercooled liquid Fe{sub 83}B{sub 17} near the eutectic composition have found that metastable crystalline phases, such as Fe{sub 23}B{sub 6}, can be formed and persist down to ambient temperature even for rather modest cooling rates. Using time-resolved high-energy x-ray diffraction on electrostatically levitated samples of Fe{sub 83}B{sub 17}, we demonstrate that the Fe{sub 23}B{sub 6} metastable phase and fcc γ-Fe grow coherently from the undercooled Fe{sub 83}B{sub 17} liquid and effectively suppress the formation of the equilibrium Fe{sub 2}B + bcc α-Fe phases. The stabilization of γ-Fe offers another opportunity for experimental investigations of magnetism in metastable fcc iron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photometric properties of the Martian satellites

New photoelectric observations yield V(1, alpha) equals 12.95 + 0.036 alpha + or - 0.05, B-V equals 0.65 + or - 0.03, and U-B equals 0.18 + or - 0.03 for Deimos and V(1, 0) equals 11.9 + or - 0.2 for Phobos. The derived geometric albedos of both satellites are near 0.065. Combined photometric and polarimetric results lead to the conclusion that the satellites have dusty surfaces and are possibly basaltic but more likely carbonaceous in composition.

Zellner, B. H.↗

Quaternary Bismide Alloy ByGa1-yAs1-xBix Lattice Matched to GaAs

We report on the lattice matched quaternary alloy, B{sub y}Ga{sub 1-y}As{sub 1-x}Bi{sub x} grown by molecular beam epitaxy at conditions conducive to bismuth incorporation. Incorporating a smaller atom (boron) along with the larger atom (bismuth) allows for a reduction of the epi-layer strain and lattice matching to GaAs for compositions of Bi:B{approx_equal}1.3:1. The addition of boron flux does not significantly affect the bismuth incorporation and no change in the band gap energy is observed with increasing boron content. However, excess, non-substitutional boron is incorporated which leads to an increase in hole density, as well as an increase in the density of shallow in-gap states as observed by the loss of localization of photo-excited excitons.

14 SOLAR ENERGY↗

BSM (non SUSY) searches at Tevatron

Many extensions of the Standard Model, other that Supersymmetry, predict the existence of new heavy resonances or heavy quarks, the existence of extra dimensions which will manifest themselves by the presence of gravitons states, or a possible compositeness of quarks and leptons. Results of some of the 'Beyond Standard Model' searches made by the CDF and D0 collaborations at the Tevatron are presented. These analyses are using data corresponding to an integrated luminosity up to 4.1 fb{sup -1}. Searches for Z{prime}, W{prime}, graviton, a new quark b{prime}, quark compositeness, Leptoquarks or new long-lived particles are described here.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polystyrene-block-Polydimethylsiloxane as a Potential Silica Substitute for Polysiloxane Reinforcement

We report here on microphase-separated poly(styrene-block-dimethylsiloxane) (PS-b-PDMS) as a reinforcing filler in PDMS thermosets that overcomes the long-standing problem of aging in the processing of silica-reinforced silicone. Surprisingly, PS-b-PDMS reinforced composites display comparable mechanical performance to silica-modified analogs, even though the modulus of PS is much smaller than that of silica and there is no evidence of percolation with respect to the rigid PS domains. We have found that a few unique characteristics contribute to the reinforcing performance of PS-b-PDMS. The strong self-assembly behavior promotes batch-to-batch repeatability by having well-dispersed fillers. The structure and size of the fillers depend on the loading and characteristics of both filler and matrix, along with the shear effect. The reinforcing effect of PS-b-PDMS is mostly brought by the entanglements between the corona layer of the filler and the matrix, rather than the hydrodynamic reinforcement of the PS phase.

36 MATERIALS SCIENCE↗

Numerical Simulation of THM Growth of CdTe in Presence of Rotating Magnetic Fields

The influence of rotating magnetic fields (RMF) on the flow pattern and compositional uniformity in the solution zone of a traveling heater method (THM) system for growth of CdTe is numerically investigated. The analysis is conducted at the 10(exp -6) and 10(exp -1) g(sub 0) as representative of space and ground processing conditions. It is shown that under microgravity conditions, application of RMF can be used to overwhelm residual buoyancy-induced convection and to control the uniformity of solution-zone composition at the growth front without appreciable modification of the growth interface shape. At high gravity levels, RMF is found not to be able to completely dominate buoyancy-induced convection. In this regime, for the range of field strengths studied, RMF is found to result in a) complex flow structures in the solution zone, b) enhancement of compositional non-uniformities at the growth front, and c) increased convexity of the growth interface. A scaling analysis of convection in the solution zone is used to generate a non-dimensional map delineating the RMF- and gravity-dominated flow regimes.

Ghaddar, Chahid K.↗

DWPF DECON FRIT SUPERNATE ANALYSIS

The Savannah River National Laboratory (SRNL) has been requested to perform analyses on samples of the Defense Waste Processing Facility (DWPF) decon frit slurry (i.e., supernate samples and sump solid samples). Four 1-L liquid slurry samples were provided to SRNL by Savannah River Remediation (SRR) from the 'front-end' decon activities. Additionally, two 1-L sump solids samples were provided to SRNL for compositional and physical analysis. This report contains the results of the supernate analyses, while the solids (sump and slurry) results will be reported in a supplemental report. The analytical data from the decon frit supernate indicate that all of the radionuclide, organic, and inorganic concentrations met the limits in Revision 4 of the Effluent Treatment Plant (ETP) Waste Acceptance Criteria (WAC) with the exception of boron. The ETP WAC limit for boron is 15.0 mg/L while the average measured concentration (based on quadruplicate analysis) was 15.5 mg/L. The measured concentrations of Li, Na, and Si were also relatively high in the supernate analysis. These results are consistent with the relatively high measured value of B given the compositional make-up of Frit 418. Given these results, it was speculated that either (a) Frit 418 was dissolving into the supernate or aqueous fraction and/or (b) fine frit particulates were carried forward to the analytical instrument based on the sampling procedure used (i.e., the supernate samples were not filtered - only settled with the liquid fraction being transferred with a pipette). To address this issue, a filtered supernate sample (using a 0.45 um filter) was prepared and submitted for analysis. The results of the filtered sample were consistent with 'unfiltered or settled' sample - relatively high values of B, Li, Na, and Si were found. This suggests that Frit 418 is dissolving in the liquid phase which could be enhanced by the high surface area of the frit fines or particulates in suspension. Based on the results of this study, it is recommended that DWPF re-evaluate the technical basis for the B WAC limit (the only component that exceeds the ETP WAC limit from the supernate analyses) or assess if a waiver or exception can be obtained for exceeding this limit. Given the possible dissolution of B, Li, Na, and Si into the supernate (due to dissolution of frit), DWPF may need to assess if the release of these frit components into the supernate are a concern for the disposal options being considered. It should be noted that the results of this study may not be representative of future decon frit solutions or sump/slurry solids samples. Therefore, future DWPF decisions regarding the possible disposal pathways for either the aqueous or solid portions of the Decon Frit system need to factor in the potential differences. More specifically, introduction of a different frit or changes to other DWPF flowsheet unit operations (e.g., different sludge batch or coupling with other process streams) may impact not only the results but also the conclusions regarding acceptability with respect to the ETF WAC limits.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dynamic magnetic permeability of the heterogeneous nanosystems based on (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} composites

Thin films of (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} nanocomposites and hybrid nanocomposite–semiconductor [(Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x}/C]{sub 50} multilayers are synthesized by ion-beam deposition at various contents x of ferromagnetic metallic Co{sub 41}Fe{sub 39}B{sub 2O} nanogranules in an SiO{sub 2} matrix and at various carbon layer thicknesses h < 2 nm. Their magnetic and electrical properties, high-frequency magnetic permeability, magnetooptical spectra, and FMR spectra are studied. It is found that both the single-layer nanocomposites and the multilayers with carbon interlayers are superparamagnetic at x < x{sub per}, where x{sub per} is the electric conduction percolation threshold: a hysteresis at room temperature is absent, and the blocking temperature determined in quasi-static measurements does not exceed 20–30 K and weakly depends on the carbon layer thickness. At a carbon layer thickness h = 1.2–1.8 nm, the real and imaginary parts of complex magnetic permeability at 50 MHz and room temperature are substantially higher than those of the nanocomposites without carbon layers: their values are typical of ferromagnets. This dependence points to an exchange interaction between nanogranules in layers through a carbon interlayer. The influence of a conducting layer on the static and dynamic magnetic properties of a system of interacting superparamagnetic particles is discussed.

36 MATERIALS SCIENCE↗

Atmospheric CO 2 estimates for the Miocene to Pleistocene based on foraminiferal $δ^{11}$B at Ocean Drilling Program Sites 806 and 807 in the Western Equatorial Pacific

Constraints on the evolution of atmospheric CO 2 levels throughout Earth's history are foundational to our understanding of past variations in climate. Despite considerable effort, records vary in their temporal and spatial coverage and estimates of past CO 2 levels do not always converge, and therefore new records and proxies are valuable. Here we reconstruct atmospheric CO 2 values across major climate transitions over the past 16 million years using the boron isotopic composition (δ 11 B) of planktic foraminifera from 89 samples obtained from two sites in the West Pacific Warm Pool, Ocean Drilling Program (ODP) Sites 806 and 807, measured using high-precision multi-collector inductively coupled plasma mass spectrometry. We compare our results to published data from ODP Site 872, also in the Western Equatorial Pacific, that goes back to 22 million years ago. These sites are in a region that today is near equilibrium with the atmosphere and are thought to have been in equilibrium with the atmosphere for the interval studied. We show that δ 11 B data from this region are consistent with other boron-based studies. The data show evidence for elevated pCO 2 during the Middle Miocene and Early to Middle Pliocene, and reductions in pCO 2 of ~200 ppm during the Middle Miocene Climate Transition, ~250 ppm during Pliocene Glacial Intensification and ~50 ppm during the Mid-Pleistocene Climate Transition. During the Mid-Pleistocene Transition there is a minimum pCO 2 at marine isotopic stage (MIS) 30. Our results are consistent with a coupling between pCO 2 , temperature and ice sheet expansion from the Miocene to the late Quaternary.

54 ENVIRONMENTAL SCIENCES↗

Young Pb-Isotopic Ages of Chondrules in CB Carbonaceous Chondrites

CB (Bencubbin-type) carbonaceous chondrites differ in many ways from more familiar CV and CO carbonaceous chondrites and from ordinary chondrites. CB chondrites are very rich in Fe-Ni metal (50-70 vol%) and contain magnesian silicates mainly as angular to sub-rounded clasts (or chondrules) with barred olivine (BO) or cryptocrystalline (CC) textures. Both metal and silicates appear to have formed by condensation. The sizes of silicate clasts vary greatly between the two subgroups of CB chondrites: large (up to one cm) in CB(sub a) chondrites, and typically to much much less than 1 mm in CB(sub b) chondrites. The compositional and mineralogical differences between these subgroups and between the CB(sub s) and other types of chondrites suggest different environment and possibly different timing of chondrule formation. In order to constrain the timing of chondrule forming processes in CB(sub s) and understand genetic relationship between their subgroups, we have determined Pb-isotopic ages of silicate material from the CB(sub a) chondrite Gujba and CB(sub b) chondrite Hammadah al Hamra 237 (HH237 hereafter).

Amelin, Yuri↗

Be:B Amorphous Coatings and Order-Disorder Transitions

Here Be:B films were explored as a possible ablator material for use in inertial confinement fusion target capsules. It was found that Be:B forms an amorphous structure near the eutectic composition of 11 to 12 at. % B. It is believed that having an amorphous ablator should be useful in suppressing Rayleigh-Taylor instabilities during compression of the target. As the composition is moved away from the eutectic, an amorphous-to–columnar structure transition was more likely to be observed after some finite thickness of amorphous material had been deposited. Microstructural analysis indicated that this transition involved the nucleation of nanocrystal structures within the amorphous matrix. This nanocrystal nucleation is believed to be due to supersaturation of the dopant atom in the host. Finally, an efficient packing analysis is also presented in an effort to explain the most favorable amorphous composition of 11 to 12 at. % B doping observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗