SEARCH · Search NASA

Results for “Computer Based Procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1998

An Assessment of Artificial Compressibility and Pressure Projection Methods for Incompressible Flow Simulations

Performance of the two commonly used numerical procedures, one based on artificial compressibility method and the other pressure projection method, are compared. These formulations are selected primarily because they are designed for three-dimensional applications. The computational procedures are compared by obtaining steady state solutions of a wake vortex and unsteady solutions of a curved duct flow. For steady computations, artificial compressibility was very efficient in terms of computing time and robustness. For an unsteady flow which requires small physical time step, pressure projection method was found to be computationally more efficient than an artificial compressibility method. This comparison is intended to give some basis for selecting a method or a flow solution code for large three-dimensional applications where computing resources become a critical issue.

Kwak, Dochan↗

NASA NTRS1985

Computers in Aerospace Conference, 5th, Long Beach, CA, October 21-23, 1985, Technical Papers

Among the topics discussed are: access control models for a distributed CAIS-conforming system; a knowledge-based advisory system for casualty procedures; and automated interactive simulation modeling system. Consideration is also given to: reusable software concepts and software development methodologies; the electronic device aspects of neutral network memories; an expert system for automated satellite anomaly resolution; and the use of automatic programming techniques for fault-tolerant computing systems. Among additional topics discussed are: systems approaches to software fault tolerance; a Space Shuttle navigation validation system; and a vision-based road following system for an autonomous land vehicle.

Source record↗

NASA NTRS1989

Partitioning strategy for efficient nonlinear finite element dynamic analysis on multiprocessor computers

A computational procedure is presented for the nonlinear dynamic analysis of unsymmetric structures on vector multiprocessor systems. The procedure is based on a novel hierarchical partitioning strategy in which the response of the unsymmetric and antisymmetric response vectors (modes), each obtained by using only a fraction of the degrees of freedom of the original finite element model. The three key elements of the procedure which result in high degree of concurrency throughout the solution process are: (1) mixed (or primitive variable) formulation with independent shape functions for the different fields; (2) operator splitting or restructuring of the discrete equations at each time step to delineate the symmetric and antisymmetric vectors constituting the response; and (3) two level iterative process for generating the response of the structure. An assessment is made of the effectiveness of the procedure on the CRAY X-MP/4 computers.

Noor, Ahmed K.↗

NASA NTRS1989

A partitioning strategy for efficient nonlinear finite element dynamic analysis on multiprocessor computer

Noor, Ahmed K.↗

NASA NTRS1973

Numerical analysis of stiffened shells of revolution. Volume 2: Users' manual for STAR-02S - shell theory automated for rotational structures - 2 (statics), digital computer program

A procedure for the structural analysis of stiffened shells of revolution is presented. A digital computer program based on the Love-Reissner first order shell theory was developed. The computer program can analyze orthotropic thin shells of revolution, subjected to unsymmetric distributed loading or concentrated line loads, as well as thermal strains. The geometrical shapes of the shells which may be analyzed are described. The shell wall cross section can be a sheet, sandwich, or reinforced sheet or sandwich. General stiffness input options are also available.

Svalbonas, V.↗

NASA NTRS1976

Laminar supersonic flow over a backstep - A numerical solution at higher Reynolds numbers

The Allen-Cheng solution of the flow over a backward facing step is extended to Reynolds numbers up to 16,000 and to inflow boundary-layer height ratios as low as 0.1 by moving the downstream boundary into the recompression region and by smoothing the resulting errors. The boundary conditions in the supersonic outer flow and the downstream boundary conditions in the wake are determined by an extrapolation procedure. Computational results are compared with relevant experimental data. Fair agreement is found between the calculated base pressures and the experimental values, whereas agreement between heat transfer rates appears to be qualitative only.

Kronzon, Y.↗

NASA NTRS1980

Minimum mass sizing of a large low-aspect ratio airframe for flutter-free performance

A procedure for sizing an airframe for flutter-free performance is demonstrated on a large, flexible supersonic transport aircraft. The procedure is based on using a two level reduced basis or modal technique for reducing the computational cost of performing the repetitive flutter analyses. The supersonic transport aircraft exhibits complex dynamic behavior, has a well-known flutter problem and requires a large finite element model to predict the vibratory and flutter response. Flutter-free designs were produced with small mass increases relative to the wing structural weight and aircraft payload.

Greene, W. H.↗

NASA NTRS1981

Irrigated lands assessment for water management: Technique test

A procedure for estimating irrigated land using full frame LANDSAT imagery was demonstrated. Relatively inexpensive interpretation of multidate LANDSAT photographic enlargements was used to produce a map of irrigated land in California. The LANDSAT and ground maps were then linked by regression equations to enable precise estimation of irrigated land area by county, basin, and statewide. Land irrigated at least once in California in 1979 was estimated to be 9.86 million acres, with an expected error of less than 1.75% at the 99% level of confidence. To achieve the same level of error with a ground-only sample would have required 3 to 5 times as many ground sample units statewide. A procedure for relatively inexpensive computer classification of LANDSAT digital data to irrigated land categories was also developed. This procedure is based on ratios of MSS band 7 and 5, and gave good results for several counties in the Central Valley.

Wall, S. L.↗

NASA NTRS1984

A computational method for viscous incompressible flows

An implicit, finite-difference procedure for numerically solving viscous incompressible flows is presented. The pressure-field solution is based on the pseudocompressibility method in which a time-derivative pressure term is introduced into the mass-conservation equation to form a set of hyperbolic equations. The pressure-wave propagation and the spreading of the viscous effect is investigated using simple test problems. Computed results for external and internal flows are presented to verify the present method which has proved to be very robust in simulating incompressible flows.

Kwak, D.↗

NASA NTRS1986

Transformation of two and three-dimensional regions by elliptic systems

Grid smoothing and orthogonalization procedures were developed and implemented in the construction of two and three dimensional grids. The procedures are based on the variational methods of grid generation. The two-dimensional examples were computed using the MSU IRIS Graphics Workstation. It was demonstrated that the elliptic grid generation equations, with arbitrary forcing functions, can be solved, in their variational formulation, using a gradient method. Since gradient methods have a global convergence property, the divergence problems often encountered when using SOR iterative methods can be avoided. It is not to be concluded, however, that SOR methods should be abandoned, since gradient methods tend to converge very slowly. In fact, slow convergence was the major problem encountered in the three-dimensional grids. Further progress was made on the continuing effort to develop conservative interpolation formulas for overlapping grids.

Mastin, C. Wayne↗

NASA NTRS1990

Metal matrix composites microfracture: Computational simulation

Fiber/matrix fracture and fiber-matrix interface debonding in a metal matrix composite (MMC) are computationally simulated. These simulations are part of a research activity to develop computational methods for microfracture, microfracture propagation and fracture toughness of the metal matrix composites. The three-dimensional finite element model used in the simulation consists of a group of nine unidirectional fibers in three by three unit cell array of SiC/Ti15 metal matrix composite with a fiber volume ration of 0.35. This computational procedure is used to predict the fracture process and establish the hierarchy of fracture modes based on strain energy release rate. It is also used to predict stress redistribution to surrounding matrix-fibers due to initial and progressive fracture of fiber/matrix and due to debonding of fiber-matrix interface. Microfracture results for various loading cases such as longitudinal, transverse, shear and bending are presented and discussed. Step-by-step procedures are outlined to evaluate composite microfracture for a given composite system.

Mital, Subodh K.↗

NASA NTRS1990

Metal matrix composites microfracture - Computational simulation

Mital, S. K.↗

NASA NTRS1995

Three-dimensional aerodynamic shape optimization using discrete sensitivity analysis

An aerodynamic shape optimization procedure based on discrete sensitivity analysis is extended to treat three-dimensional geometries. The function of sensitivity analysis is to directly couple computational fluid dynamics (CFD) with numerical optimization techniques, which facilitates the construction of efficient direct-design methods. The development of a practical three-dimensional design procedures entails many challenges, such as: (1) the demand for significant efficiency improvements over current design methods; (2) a general and flexible three-dimensional surface representation; and (3) the efficient solution of very large systems of linear algebraic equations. It is demonstrated that each of these challenges is overcome by: (1) employing fully implicit (Newton) methods for the CFD analyses; (2) adopting a Bezier-Bernstein polynomial parameterization of two- and three-dimensional surfaces; and (3) using preconditioned conjugate gradient-like linear system solvers. Whereas each of these extensions independently yields an improvement in computational efficiency, the combined effect of implementing all the extensions simultaneously results in a significant factor of 50 decrease in computational time and a factor of eight reduction in memory over the most efficient design strategies in current use. The new aerodynamic shape optimization procedure is demonstrated in the design of both two- and three-dimensional inviscid aerodynamic problems including a two-dimensional supersonic internal/external nozzle, two-dimensional transonic airfoils (resulting in supercritical shapes), three-dimensional transport wings, and three-dimensional supersonic delta wings. Each design application results in realistic and useful optimized shapes.

Burgreen, Gregory W.↗

NASA NTRS1992

Lumley's PODT definition of large eddies and a trio of numerical procedures

Lumley's 1967 Moscow paper provided, for the first time, a completely rational definition of the physically-useful term 'large eddy', popular for a half-century. The numerical procedures based upon his results are: (1) PODT (Proper Orthogonal Decomposition Theorem), which extracts the Large Eddy structure of stochastic processes from physical or computer simulation two-point covariances, and 2) LEIM (Large-Eddy Interaction Model), a predictive scheme for the dynamical large eddies based upon higher order turbulence modeling. Earlier Lumley's work (1964) forms the basis for the final member of the triad of numerical procedures: this predicts the global neutral modes of turbulence which have surprising agreement with both structural eigenmodes and those obtained from the dynamical equations. The ultimate goal of improved engineering design tools for turbulence may be near at hand, partly due to the power and storage of 'supermicrocomputer' workstations finally becoming adequate for the demanding numerics of these procedures.

Payne, Fred R.↗

NASA NTRS1997

Recent Progress in Parallel Schur Complement Preconditioning for Computational Fluid

We consider preconditioning methods for nonself-adjoint advective-diffusive systems based on a nonoverlapping Schur complement procedure for arbitrary triangulated domains. The triangulation is first partitioned using the METIS multi-level $k$-way partitioning code. This partitioning of the triangulation induces a natural 2x2 partitioning of the demoralization matrix. By considering various inverse approximations of the 2x2 system we have developed a family of robust preconditioning techniques. The performance of these approximations will be discussed and numerous examples shown to illustrate the efficiency of the technique.

Barth, Tim↗

NASA NTRS1999

Data Reduction Methods Applied to the Fastrac Engine

The Fastrac rocket engine is currently being developed for the X-34 technology demonstrator vehicle. The engine performance model must be calibrated to support accurate performance prediction. Data reduction is the process of estimating hardware characteristics from available test data, and is essential for effective performance model calibration and prediction. A new data reduction procedure was developed, implemented, and tested using data from Fastrac engine tests. The procedure selects hardware and test measurements to use in the reduction process based on examination of the model influence matrix condition number. Predicted hardware characteristics are recovered from the solution of a quadratic programming problem. Computational tests indicate that the new procedure provides a significant improvement in test data reduction capability. Enhancements include improved test data utilization and time history data reduction capability. The new method is generically applicable to other systems.

Santi, L. Michael↗

NASA NTRS1986

Analyzing Multidimensional Image Data

Six computer programs perform histogram cluster analysis. Histogram Cluster Analysis Procedure (HICAP) developed to perform unsupervised classification of multidimensional image data. Clustering approach used in HICAP based on algorithm which uses multidimensional histogram to perform unsupervised classification of four-dimensional Landsat multispectral-scanner data. HICAP generalizes this procedure to process up to 32-bit data with arbitrary number of dimensions. Also incorporates efficiency improvements so classification requires less computation than original algorithm. Computational savings afforded by HICAP increase with number of dimensions in data. HICAP programs written in FORTRAN 77 for batch or interactive execution.

Wharton, S. W.↗

NASA NTRS1975

A theoretical method for the analysis and design of axisymmetric bodies

A theoretical method is presented for the computation of the flow field about an axisymmetric body operating in a viscous, incompressible fluid. A potential flow method was used to determine the inviscid flow field and to yield the boundary conditions for the boundary layer solutions. Boundary layer effects in the forces of displacement thickness and empirically modeled separation streamlines are accounted for in subsequent potential flow solutions. This procedure is repeated until the solutions converge. An empirical method was used to determine base drag allowing configuration drag to be computed.

Beatty, T. D.↗