SEARCH · Search NASA

Results for “Configurable lighting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Integrated Fiber-Optic Light Probe: Measurement of Static Deflections in Rotating Turbomachinery

At the NASA Lewis Research Center, in cooperation with Integrated Fiber Optic Systems, Inc., an integrated fiber-optic light probe system was designed, fabricated, and tested for monitoring blade tip deflections, vibrations, and to some extent, changes in the blade tip clearances of a turbomachinery fan or a compressor rotor. The system comprises a set of integrated fiber-optic light probes that are positioned to detect the passing blade tip at the leading and trailing edges. In this configuration, measurements of both nonsynchronous blade vibrations and steady-state blade deflections can be made from the timing information provided by each light probe-consisting of an integrated fiber-optic transmitting channel and numerical aperture receiving fibers, all mounted in the same cylindrical housing. With integrated fiber-optic technology, a spatial resolution of 50 mm is possible while the outer diameter is kept below 2.5 mm. To evaluate these probes, we took measurements in a single-stage compressor facility and an advanced fan rig in Lewis' 9- by 15-Foot Low-Speed Wind Tunnel.

Kurkov, Anatole P.↗

NASA NTRS1994

Wing download reduction using vortex trapping plates

A download reduction technique using spanwise plates on the upper and lower wing surfaces has been examined. Experimental and analytical techniques were used to determine the download reduction obtained using this technique. Simple two-dimensional wind tunnel testing confirmed the validity of the technique for reducing two-dimensional airfoil drag. Computations using a two-dimensional Navier-Stokes analysis provided insight into the mechanism causing the drag reduction. Finally, the download reduction technique was tested using a rotor and wing to determine the benefits for a semispan configuration representative of a tilt rotor aircraft.

Light, Jeffrey S.↗

NASA NTRS1987

An assessment of upper surface blowing for the reduction of tilt rotor download

A study evaluating the use of upper-surface blowing to reduce the wing download on a V-22 tilt rotor aircraft has been completed. The study assesses the penalties associated with the upper-surface blowing system (compressor weight, compressor power, etc.), and the reduction in wing download, for a wide range of blowing slot heights and blowing pressure ratios. Three wing configurations were investigated: blowing at both leading and trailing edges with no change in wing planform relative to the V-22 tilt rotor aircraft, blowing at both leading and trailing edges with a 25% reduction in wing chord, and blowing at the leading edge only with the flap deflected 75 deg. Predicted download is presented for all of these configurations, and is compared with the download of the baseline V-22 tilt rotor aircraft configuration. The optimum configuration had 15% less net download than the baseline V-22 configuration.

Faye, Robert E.↗

NASA NTRS1983

A coronal transient associated with a high-speed type II burst

Several characteristics of a white light transient observed by the ATM Coronagraph experiment aboard Skylab are discussed. The transient was associated with a very high speed type II radio burst. The observed plane of the sky speed of the burst was 4900 km/s, 6-7 times higher than the speed of the transient itself. Based on the relative speeds of the transient and the radio burst, it is argued that the type II disturbance must have propagated in a still undisturbed corona, at an approximately 35-deg angle to the preexisting streamer and along an essentially open field configuration. The electron density gradients derived from the radio and the white light observations are compared, and it is shown that they are in agreement within the limits of the observations. The assumption that the type II was a weak MHD shock leads to large values for the coronal magnetic field. The possibility that the type II radition originated in a strong shock, with a magnetic Mach number greater than 2, is considered.

Gergely, T. E.↗

NASA NTRS1976

The interpretation of optical light variations of Centaurus X-3

The interpretation of optical light variations of X-ray binaries is discussed for the case of negligible reflection effect. The limiting cases of synchronous rotation of the visible star (Roche configuration) and of no rotation (pure tidal deformation) are considered. The theoretical results are compared with the available light curves of Cen X-3. X-ray data of the Copernicus satellite are used to get an impression of the atmospheric structure of the outer layers of the visible component. It is shown, that the X-ray eclipse duration is in good agreement with the mass ration derived from the optical variations. The X-ray eclipse duration is discussed with respect to the extended low states, and a possible correlation of the extended lows with the appearance of the optical light curves is considered.

Mauder, H.↗

NASA NTRS2015

Miniaturized High-Speed Modulated X-Ray Source

A miniaturized high-speed modulated X-ray source (MXS) device and a method for rapidly and arbitrarily varying with time the output X-ray photon intensities and energies. The MXS device includes an ultraviolet emitter that emits ultraviolet light, a photocathode operably coupled to the ultraviolet light-emitting diode that emits electrons, an electron multiplier operably coupled to the photocathode that multiplies incident electrons, and an anode operably coupled to the electron multiplier that is configured to produce X-rays. The method for modulating MXS includes modulating an intensity of an ultraviolet emitter to emit ultraviolet light, generating electrons in response to the ultraviolet light, multiplying the electrons to become more electrons, and producing X-rays by an anode that includes a target material configured to produce X-rays in response to impact of the more electrons.

Gendreau, Keith C.↗

NASA NTRS1984

Validation of a transonic analysis code for use in preliminary design of advanced transport configurations

The WBPPW code has the capability of analyzing flow-field effects about configurations which include wing pylons and engine nacelles or pods in addition to the basic wing/fuselage combination. Using the concept of grid embedding, the code solves the extended small disturbance transonic flow equation for complex flow interactions of the various configuration components. A general description of the code and solution algorithm is included. Results are presented and compared with experiment for various configurations which encompass the code capabilities. These include wing planform and wing contour modifications and variations in nacelle position beneath a high-aspect-ratio wing. Results are analyzed in the light of preliminary design, where the capability to accurately compute flow-field effects resulting from various configuration perturbations is important. The comparisons show that the computational results are sensitive to subtle design modifications and that the code could be used as an effective guide during the design process for transport configurations.

Waggoner, E. G.↗

NASA NTRS1972

Exploratory flight investigation of aircraft response to the wing vortex wake generated by jet transport aircraft

The effect of intercepting wing tip vortices generated by large jet transports, including jumbo jets, over separation distances from 1 nautical mile to 15 nautical miles is evaluated on the basis of the response of a vortex probe airplane in the roil mode. The vortex probe test aircraft included a representative general aviation airplane, an executive jet, a fighter, and light and medium weight jet transports. The test conditions and airplane configurations were comparable to those normally used during takeoff, landing, or holding pattern operations. For flight safety the tests were performed at altitudes from 9500 feet to 12,500 feet. In addition to an evaluation of the probe airplane response, a flight test technique is suggested for determining minimum separation distance, using as variable the ratio of vortex-induced roll acceleration to maximum lateral control acceleration and the gross weight of the generating aircraft.

Andrews, W. H.↗

NASA NTRS1976

Television applications of interline-transfer CCD arrays

The design features and characteristics of interline transfer (ILT) CCD arrays with 190 x 244 and 380 x 488 image elements are reviewed, with emphasis on optional operating modes and system application considerations. It was shown that the observed horizontal resolution for a TV system using an ILT image sensor can approach the aperture response limit determined by photosensor site width, resulting in enhanced resolution for moving images. Preferred camera configurations and read out clocking modes for maximum resolution and low light sensitivity are discussed, including a very low light level intensifier CCD concept. Several camera designs utilizing ILT-CCD arrays are described. These cameras demonstrate feasibility in applications where small size, low-power/low-voltage operation, high sensitivity and extreme ruggedness are either desired or mandatory system requirements.

Hoagland, K. A.↗

NASA NTRS1979

Nephelometer evaluation for measurement of cloud parameters in earth and planetary atmospheres

Initial work was concerned with determining whether the radiation emitted from a laser source could be sufficiently collimated to provide a suitable source for a nephelometer-type instrument. It was necessary to develop a standard scatterer that could be used to evaluate the performance of a nephelometer. The possible use of a gallium arsenide diode as a radiation source also was investigated. The first of these utilized a single lens to focus the light scattered from a target onto a ring detector. The second configuration used reflecting and refracting axicons as optical-system elements. The work performed in each of these areas is described.

Ballard, G. S.↗

NASA NTRS1990

Fixed-Position Isolation Valve

Connection box and mating plugs constitute device to allow or block flow of fluid. Device acts as isolation valve in sense set in open or closed configuration. Not strictly valve in sense configuration cannot be changed during operation without spilling fluid. Intended for use where changes between open and closed configurations meant to be infrequent. Principle virtues of device are its light weight and compactness.

Mckulla, Frank S.↗

NASA NTRS1991

Mass loss in the 96 day binary UU Cancri

A series of 16 high-dispersion spectra at H-alpha have been obtained for the tidally distorted K giant-containing long-period binary UU Cnc, in order to both study the K giant's Doppler profiles and search for the effects of accretion onto the second component. While Doppler profiles of the system for a semidetached configuration fit the observations very well, those for existing overcontact light-curve solutions all yield poorer fits. Although the H-alpha line is always stronger than those of the common giants, its equivalent width is consistent with a K4 II classification reflective of the star's 50 solar radius size. Emission wings in H-alpha are possible evidence for an accretion disk.

Eaton, Joel A.↗

NASA NTRS2001

Utilization of an Airborne Plant Chlorophyll Imaging System for Detection of Septic System Malfunction

Malfunctioning, or leaking, sewer systems increase the supply of water and nutrients to surface vegetation. Excess nutrients and harmful bacteria in the effluent pollute ground water and local water bodies and are dangerous to humans and the aquatic ecosystems. An airborne multispectral plant chlorophyll imaging system (PCIS) was used to identify growth patterns in the vegetation covering onsite and public sewer systems. The objective was to evaluate overall performance of the PCIS as well as to determine the best operational configuration for this application. The imaging system was flown in a light aircraft over selected locations Mobile County, Alabama. Calibration panels were used to help characterize instrument performance. Results demonstrated that the PCIS performed well and was capable of detecting septic leakage patterns from altitudes as high as 915 m. From 915 m, 6 of 18 sites were suspected to have sewage leakage. Subsequent ground inspections confirmed leakage on 3 of the 6 sites. From 610 m, 3 of 8 known leakage sites were detected. Tree cover and shadows near residential structures prevented detection of several known malfunctioning systems. Also some leakages known to occur in clear areas were not detected. False detections occurred in areas characterized by surface water drainage problems or recent excavation.

Spiering, Bruce A.↗

NASA NTRS2005

Fault-Tolerant Heat Exchanger

A compact, lightweight heat exchanger has been designed to be fault-tolerant in the sense that a single-point leak would not cause mixing of heat-transfer fluids. This particular heat exchanger is intended to be part of the temperature-regulation system for habitable modules of the International Space Station and to function with water and ammonia as the heat-transfer fluids. The basic fault-tolerant design is adaptable to other heat-transfer fluids and heat exchangers for applications in which mixing of heat-transfer fluids would pose toxic, explosive, or other hazards: Examples could include fuel/air heat exchangers for thermal management on aircraft, process heat exchangers in the cryogenic industry, and heat exchangers used in chemical processing. The reason this heat exchanger can tolerate a single-point leak is that the heat-transfer fluids are everywhere separated by a vented volume and at least two seals. The combination of fault tolerance, compactness, and light weight is implemented in a unique heat-exchanger core configuration: Each fluid passage is entirely surrounded by a vented region bridged by solid structures through which heat is conducted between the fluids. Precise, proprietary fabrication techniques make it possible to manufacture the vented regions and heat-conducting structures with very small dimensions to obtain a very large coefficient of heat transfer between the two fluids. A large heat-transfer coefficient favors compact design by making it possible to use a relatively small core for a given heat-transfer rate. Calculations and experiments have shown that in most respects, the fault-tolerant heat exchanger can be expected to equal or exceed the performance of the non-fault-tolerant heat exchanger that it is intended to supplant (see table). The only significant disadvantages are a slight weight penalty and a small decrease in the mass-specific heat transfer.

Izenson, Michael G.↗

NASA NTRS2011

Image Quality of the Helioseismic and Magnetic Imager (HMI) Onboard the Solar Dynamics Observatory (SDO)

We describe the imaging quality of the Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO) as measured during the ground calibration of the instrument. We describe the calibration techniques and report our results for the final configuration of HMI. We present the distortion, modulation transfer function, stray light,image shifts introduced by moving parts of the instrument, best focus, field curvature, and the relative alignment of the two cameras. We investigate the gain and linearity of the cameras, and present the measured flat field.

Solar Dynamics Observatory↗

DOE OSTI2026

Kaon leptonic and semileptonic decays with $N_f=2+1+1$ HISQ fermions

Precision tests of the Standard Model (SM) currently show a deficit in first-row Cabibbo-Kobayashi-Maskawa (CKM) unitarity. In this talk, we discuss progress towards a correlated analysis of the lattice-QCD inputs needed to test this relation with kaon data using highly improved staggered quarks (HISQ) on the MILC $N_{f}=2+1+1$ configurations. We present the status of a new analysis of light-meson decay constant data where chiral-continuum fits are guided by staggered chiral perturbation theory (SChPT). The goal of SChPT is twofold: it allows us to use data not only at physical pion mass but also at unphysical masses. Moreover, it provides values of ChPT low energy constants (LECs) as well as their correlations. We also present a reanalysis of our previous kaon semileptonic form factor calculation, aiming to estimate correlations between the form factor and light-meson decay constants. We discuss the new methodology, new data included, and present some preliminary results.

Merino, Ramón [Granada U.] (ORCID:000900039150393X↗

DOE OSTI2026

Transition-state lattice modes and the breakdown of adiabatic tunneling for hydrogen and deuterium in bcc Nb

Interstitial hydrogen and deuterium in body-centered-cubic metals constitute archetypal quantum tunneling systems. Their relevance has been renewed by the connection between hydrogenic tunneling in Nb and defect-induced decoherence in superconducting qubits, motivating a predictive microscopic theory. Existing theoretical treatments invoke an adiabatic separation between the light interstitial and the host lattice, an assumption whose validity has not been rigorously established for hydrogenic species. Here, we show that the experimentally measured tunnel splittings of O-trapped H and D in bcc Nb are quantitatively reproduced only within a five-dimensional (5D) Lattice-Renormalized Born-Oppenheimer (LRBO) framework. This approach treats three interstitial modes and two judiciously selected lattice modes, which includes a transition-state mode, on equal quantum footing. By recasting nested Born-Oppenheimer hierarchies within this same formalism and benchmarking against modern \textit{ab initio} potential energy surfaces, we show that adiabatic separation of the light particle from lattice dynamics is satisfied only in the positive-muon ($μ^{+}$) mass limit. In contrast, tunneling for H and D is fundamentally a collective, nonadiabatic process mediated by anharmonic lattice couplings. Finally, we show that the breakdown of adiabaticity can be anticipated from simple energy estimates involving the ground-state light-particle energy evaluated at a small number of fixed lattice configurations, providing a practical criterion for assessing the validity of adiabatic tunneling theories in other systems.

Pritchard, P. Graham [Northwestern U.]↗

DOE OSTI2025

Time-reversed Young’s experiment: Deterministic, diffractionless second-order interference effect

The classic Young’s double-slit experiment exhibits first-order interference, producing alternating bright and dark fringes shaped by the diffraction effect of the slits. In contrast, here we demonstrate that its time-reversed configuration generates an ideal, deterministic second-order ‘ghost’ interference pattern free from diffraction and first-order effects with the use of only a position-fixed detector. The pattern’s size is governed by the dimensions of the ‘effectively extended light source’ formed by point emitter(s). Beyond highlighting the nonreciprocal physics between the two configurations, this system unlocks a range of novel phenomena inaccessible in traditional double-slit experiments. These include fully programmable, digitized interference fringe formations and the ability to align the pattern plane with the source plane on the same side of the setup. Remarkably, our proposed experiment achieves these outcomes without relying on nonclassical correlations or quantum entanglement. Here, by restoring time-reversal symmetry and eliminating diffraction, our theoretical analysis reveals that this approach offers exciting potential for advancing optical imaging and sensing technologies with improved transverse and longitudinal phase-shift sensitivity and resolution limit beyond current limitations.

74 ATOMIC AND MOLECULAR PHYSICS↗