Search NASA⌕ Search

SEARCH · Search NASA

Results for “Confining System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Clinical physiology of bed rest

Maintenance of optimal health in humans requires the proper balance between exercise, rest, and sleep as well as time in the upright position. About one-third of a lifetime is spent sleeping; and it is no coincidence that sleeping is performed in the horizontal position, the position in which gravitational influence on the body is minimal. Although enforced bed rest is necessary for the treatment of some ailments, in some cases it has probably been used unwisely. In addition to the lower hydrostatic pressure with the normally dependent regions of the cardiovascular system, body fuid compartments during bed rest in the horizontal body position, and virtual elimination of compression on the long bones of the skeletal system during bed rest (hypogravia), there is often reduction in energy metabolism due to the relative confinement (hypodynamia) and alteration of ambulatory circadian variations in metabolism, body temperature, and many hormonal systems. If patients are also moved to unfamiliar surroundings, they probably experience some feelings of anxiety and some sociopsychological problems. Adaptive physiological responses during bed rest are normal for that environment. They are attempts by the body to reduce unnecessary energy expenditure, to optimize its function, and to enhance its survival potential. Many of the deconditioning responses begin within the first day or two of bed rest; these early responses have prompted physicians to insist upon early resumption of the upright posture and ambulation of bedridden patients.

Greenleaf, John E.↗
NASA NTRS1995

RY Scuti: Infrared and radio observations of the mass-loss wind of a massive binary star system

We report infrared (IR) imaging, IR photometry, IR spectroscopy, optical/IR photopolarimetry, and Very Large Array (VLA) radio observations of the peculiar binary star RY Scuti. These observations provide an unprecedented view of the detailed spatial structure of the equatorial mass-loss wind of a massive, luminous, 'overcontact' binary system. The binary star (0.43 AU separation) is surrounded by a flattened equatorial disk with an outer radius of approximately = 3 x 10(exp 16) cm (2000 AU) that emits strongly in the IR and radio. The inside of the disk is ionized and emits free-free radiation from hydrogen and 12.8 micrometers forbidden-line emission from (Ne II); the outside of the disk emits thermal radiation from silicate dust. Radio continuum emission is also produced in a compact H II region surrounding the binary. The dust may have a polycyclic aromatic hydrocarbon (PAH) component. We use a rudimentary geometric model in which the thermal IR and radio emission from the disk are assumed to arise in a pair of concentric toroidal rings to estimate the physical properties of the disk. The mean radius of the ionized gas toroid is approximately = 1.3 x 10(exp 16) cm (870 AU), and the mean radius of the dust toroid is approximately = 2.2 x 10(exp 16) cm (1470 AU). RY Scuti has a small intrinsic polarization, with the electric vector perpendicular to the equatorial disk, that is probably caused by electron scattering from hot gas close to the central binary. We conclude that neon in the nebula is overabundant with respect to hydrogen and helium by a factor of between 1.6 and 10. Our IR/radio image data suggest that the circumstellar disk is part of an extensive radiation driven mass-loss outflow that is strongly confined to the equatorial plane of the binary system. The sharp spatial separation of the outer dust torous from the inner ionized gas torus confirms earlier suggestions that dust formation in the circumstellar ejecta of very hot stars must occur in regions that are shielded from the hard radiation field.

Gehrz, R. D.↗
NASA NTRS2012

Preliminary Aerodynamic Investigation of Fan Rotor Blade Morphing

Various new technologies currently under development may enable controlled blade shape variability, or so-called blade morphing, to be practically employed in aircraft engine fans and compressors in the foreseeable future. The current study is a relatively brief, preliminary computational fluid dynamics investigation aimed at partially demonstrating and quantifying the aerodynamic potential of fan rotor blade morphing. The investigation is intended to provide information useful for near-term planning, as well as aerodynamic solution data sets that can be subsequently analyzed using advanced acoustic diagnostic tools, for the purpose of making fan noise comparisons. Two existing fan system models serve as baselines for the investigation: the Advanced Ducted Propulsor fan with a design tip speed of 806 ft/sec and a pressure ratio of 1.294, and the Source Diagnostic Test fan with a design tip speed of 1215 ft/sec and a pressure ratio of 1.470. Both are 22-in. sub-scale, low-noise research fan/nacelle models that have undergone extensive experimental testing in the 9- by 15-foot Low Speed Wind Tunnel at the NASA Glenn Research Center. The study, restricted to fan rotor blade morphing only, involves a fairly simple blade morphing technique. Specifically, spanwise-linear variations in rotor blade-section setting angle are applied to alter the blade shape; that is, the blade is linearly retwisted from hub to tip. Aerodynamic performance comparisons are made between morphed-blade and corresponding baseline configurations on the basis of equal fan system thrust, where rotor rotational speed for the morphed-blade fan is varied to change the thrust level for that configuration. The results of the investigation confirm that rotor blade morphing could be a useful technology, with the potential to enable significant improvements in fan aerodynamic performance. Even though the study is very limited in scope and confined to simple geometric perturbations of two existing fan systems, the aerodynamic effectiveness of blade morphing is demonstrated by the configurations analyzed. In particular, for the Advanced Ducted Propulsor fan it is demonstrated that the performance levels of the original variable-pitch baseline design can be achieved using blade morphing instead of variable pitch, and for the Source Diagnostic Test fan the performance at important off-design operating points is substantially increased with blade morphing.

Tweedt, Daniel L.↗
NASA NTRS1976

On the stability of the solutions of the general problem of three bodies

The extent through which the initial conditions of a given three-body system may be varied without completely changing the qualitative nature of the subsequent system evolution is investigated. It is assumed that the three masses are equal, all initial velocities are zero, the first two bodies initially lie on the x-axis, and the position of the third body is confined to a specific region of space. Analysis of the system evolution for different initial positions of the third body shows that there is a whole area or 'island' in the x-y plane throughout which the initial position of the third body may be moved in a continuous fashion to produce an evolution which also changes in a continuous manner. A Monte Carlo approach is adopted to determine the full extent of this island in the general problem. It is concluded that the stability of a full solution may be directly related to the size of its island in phase space.

Standish, E. M., Jr.↗
DOE OSTI2025

Light-Modulated Self-Assembly of Synthetic Nanotubes

Artificial biomolecular polymers with the capacity to respond to stimuli are emerging as a key component to the development of living materials and synthetic cells. Here, in this work, we demonstrate artificial DNA tubular nanostructures that form in response to light in a dose-dependent manner. These nanotubes assemble from programmable DNA tile motifs that are engineered to include a UV-responsive domain so that UV irradiation activates nanotube self-assembly. We demonstrate that the nanotube formation speed can be tuned by adjusting the UV dose. We then couple the light-dependent activation of tiles with RNA transcription, making it possible to control nanotube formation via concurrent physical and biochemical stimuli. Finally, we illustrate how UV activation effectively controls nanotube assembly in confinement as a rudimentary stimulus-responsive cytoskeletal system that can achieve various conformations in a minimal synthetic cell. This study contributes new tile designs that are immediately useful to building biomolecular scaffolds with controllable dynamics in response to multiple stimuli.

DNA nanotechnology↗
DOE OSTI2025

Spin dynamics in natural multiferroic pyroxene NaFeSi 2 ⁢O 6

Spin dynamics in the natural mineral aegirine, NaFeSi 2⁢ O 6 , a member of the pyroxene family, was studied by elastic and inelastic neutron scattering. Magnetization and specific-heat measurements as well as single-crystal neutron diffraction maps, taken in the temperature range 2–20 K, confirm two successive magnetic transitions at 8.8 and 5.8 K, consistent with previous studies. The observed spin-wave excitations emerge from the incommensurate magnetic Bragg peaks corresponding to the propagation vector 𝑘 ICM = (0,0.77,0), and extend up to energies of about 1.5 meV. In the low-temperature helical phase, the spin dynamics of the Fe3+ ions is well described by a simple linear spin-wave model. The observed excitations can be modeled using a spin Hamiltonian that includes three primary exchange interactions—intrachain coupling 𝐽 = 0.142⁢(2) ⁢meV, and interchain couplings 𝐽 1 = 0.083⁢(1) ⁢meV and 𝐽 2 = 0.186⁢(1) meV—and an easy-plane anisotropy 𝐷 = 0.020⁢(6)⁢ meV. Furthermore, our results show that no single exchange interaction dominates the spin dynamics. The similar strengths of the intrachain and interchain couplings point to the fact that the magnetic interactions in aegirine are three dimensional rather than confined along one direction. As a result, the system cannot be considered quasi one dimensional, as previously suggested, and calls for further investigations.

Magnetic coupling↗
NASA NTRS1962

Evaluations of Space Shielding

A general method of evaluating the efficiency of space vehicle shielding is developed and used to compare various active and passive systems for protection against ionizing radiation. Available permanent magnets are found useless for active shielding, and combined active-passive systems in general are determined to be inefficient. On the other hand, evaluations show that active electrostatic shielding may have possibilities for weight savings if electrical conditions (presently unknown) are favorable therefor in space. Further, a positive potential improvement is calculated for an active shielding system which utilizes superconducting Nb3Sn to provide a confined magnetic flux to deflect incident charged particles; this potential points toward substantial reductions in shield weight for the protection of large vehicles from highly energetic particles. Recommendations are made for further research, particularly for flight experiments to measure directionality of solar flare protons.

SHIELDING↗
NASA NTRS1984

Disappearance and disintegration of comets

The present investigation has the objective to provide a summary of the existing evidence on the disappearance of comets and to draw conclusions regarding the physical processes involved in the disappearance. Information concerning the classification of evidence and the causes of apparent disappearance of comets is presented in a table. Attention is given to the dissipating comets, the headless sungrazing comet 1887 I, and the physical behavior of the dissipating comets and the related phenomena. It is found that all comets confined to the planetary region of the solar system decay on astronomically short time scales. However, only some of them appear to perish catastrophically. Some of the observed phenomena could be successfully interpreted. But little insight has been obtained into the character of the processes which the dissipating comets experience.

Sekanina, Z.↗
NASA NTRS1984

The rotation of Hyperion

For almost the entire range of dimensions of Hyperion allowed by uncertainties in the observations, the satellite cannot librate stably about a rotation rate which is synchronous with its orbital mean motion. Rather, the large gravitational torques on the asymmetric satellite coupled with the large eccentricity forced by the orbital resonance with Titan cause Hyperion to tumble in a random manner. Large changes in orientation of body axes relative to inertial space and in the instantaneous spin rate occur on timescales of the order of the orbit period. Numerical evaluation of the exponential divergence of nearby trajectories in the phase space of the motion verifies that the tumbling is truly chaotic. This newly defined state of chaotic rotation for Hyperion is likely to be the only example of confined, continuously observable chaotic motion in the solar system.

Peale, S. J.↗
NASA NTRS1993

Temperature and abundances in the Jovian auroral stratosphere. 2: Ethylene as a probe of the microbar region

Individual emission lines of ethylene (C2H4) near 10.5 micron were measured from the equatorial and north polar regions of Jupiter. Observations were made at a spectral resolution of 0.00083/cm using infrared heterodyne spectroscopy at the NASA Infrared Telescope Facility of Mauna Kea, Hawaii. The line shape information possible with this resolving power permitted the retrieval of quiescent ethylene abundances and the investigation of abundance and thermal structure variability in the polar auroral region. A rough distribution of the north polar emission as a function of longitude was obtained with an instantaneous field of view (full width at half maximum) of approximately 1 arc sec on the planet. The greatest C2H4 emission was observed near the nominal north polar methane hot spot (60 deg N, 180 deg longitude, System III, 1965). It was found to be confined to less than 10 deg longitude on the planet. Using a Voyager-derived thermal profile, retrieved ethylene mole fractions for equatorial and north polar quiescent (non-hot spot) regions were consistent with results from existing photochemical models. At the hot spot an 18-fold increase in abundance was required near the 10-microbar level to reproduce the data. Alternatively varying the stratospheric thermal profile, a 67-137 K increase in temperature was required at the approximately 10-microbar level to satisfy the observed emission, if the C2H4 mole fraction is fixed to the quiescent value. These results provide the first direct probe of the upper stratosphere of Jupiter and give upper limits to the temperature increase near the source of the north polar thermal infrared aurora. Combined with results from similar measurements of auroral ethane emission (Livengood et al., this issue) probing the 1-mbar region, altitude information on the thermal structure can be obtained for the first time. The ethylene line emission region extends to the few microbar pressure level and may overlap the region where the H2 ultraviolet aurora is formed; thus it can be used as a probe of the coupling between the ultraviolet and thermal infrared phenomena.

Kostiuk, Theodor↗
NASA NTRS2011

Flight Test Results of a GPS-Based Pitot-Static Calibration Method Using Output-Error Optimization for a Light Twin-Engine Airplane

As part of the NASA Aviation Safety Program (AvSP), a novel pitot-static calibration method was developed to allow rapid in-flight calibration for subscale aircraft while flying within confined test areas. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. This method has been demonstrated in subscale flight tests and has shown small 2- error bounds with significant reduction in test time compared to other methods. The current research was motivated by the desire to further evaluate and develop this method for full-scale aircraft. A goal of this research was to develop an accurate calibration method that enables reductions in test equipment and flight time, thus reducing costs. The approach involved analysis of data acquisition requirements, development of efficient flight patterns, and analysis of pressure error models based on system identification methods. Flight tests were conducted at The University of Tennessee Space Institute (UTSI) utilizing an instrumented Piper Navajo research aircraft. In addition, the UTSI engineering flight simulator was used to investigate test maneuver requirements and handling qualities issues associated with this technique. This paper provides a summary of piloted simulation and flight test results that illustrates the performance and capabilities of the NASA calibration method. Discussion of maneuver requirements and data analysis methods is included as well as recommendations for piloting technique.

Martos, Borja↗
NASA NTRS2017

Formation of Heliospheric Arcs of Slow Solar Wind

A major challenge in solar and heliospheric physics is understanding the origin and nature of the so-called slow solar wind. The Sun's atmosphere is divided into magnetically open regions, known as coronal holes, where the plasma streams out freely and fills the solar system, and closed regions, where the plasma is confined to coronal loops. The boundary between these regions extends outward as the heliospheric current sheet (HCS). Measurements of plasma composition strongly imply that much of the slow wind consists of plasma from the closed corona that escapes onto open field lines, presumably by field-line opening or by interchange reconnection. Both of these processes are expected to release closed-field plasma into the solar wind within and immediately adjacent to the HCS. Mysteriously, however, slow wind with closed-field plasma composition is often observed in situ far from the HCS. We use high-resolution, three-dimensional, magnetohydrodynamic simulations to calculate the dynamics of a coronal hole with a geometry that includes a narrow corridor flanked by closed field and is driven by supergranule-like flows at the coronal-hole boundary. These dynamics produce giant arcs of closed-field plasma that originate at the open-closed boundary in the corona, but extend far from the HCS and span tens of degrees in latitude and longitude at Earth. We conclude that such structures can account for the long-puzzling slow-wind observations.

Higginson, A. K.↗
NASA NTRS2019

Dwarf Tomato and Dwarf Pepper as Potential Space Crops

Crops for space life support systems and in particular, early supplemental food production systems must be able to fit into the confined volume of space craft or space habitats. For example, spaceflight plant chambers such as Svet, Lada, Astroculture, BPS, and Veggie provided approximately 15-40 cm of growing height for plant shoots. Six cultivars each of tomato and pepper were selected for initial study based on their advertised dwarf growth and high yields. Plants were grown in 10-cm pots with solid potting medium and controlled-release fertilizer to simulate the rooting constraints that might be faced in space environments. Lighting was provided by fluorescent lamps (~300 umol m(exp -1) s(exp -1) and a 16 h light / 8 h dark photoperiod. Cultivars were then down selected to three each for pepper (cvs. Red Skin, Pompeii, and Fruit Basket) and tomato (cvs. Red Robin, Mohamed, and Sweet n' Neat). In all cases (pepper and tomato), the plants grew to an approximate height of 20 cm and produced between 200 and 300 g fruit fresh mass per plant. In previous hydroponic studies with unrestricted root growth, Fruit Basket pepper and Red Robin tomato produced much larger plants with taller shoots. The findings suggest that high value, nutritious crops like tomato and pepper could be grown within small volumes of space habitats, but horticultural issues, such as rooting volume could be important in controlling plant size.

Life Support↗
NASA NTRS1971

Optimization of life support systems and their systems reliability

The identification, analysis, and optimization of life support systems and subsystems have been investigated. For each system or subsystem that has been considered, the procedure involves the establishment of a set of system equations (or mathematical model) based on theory and experimental evidences; the analysis and simulation of the model; the optimization of the operation, control, and reliability; analysis of sensitivity of the system based on the model; and, if possible, experimental verification of the theoretical and computational results. Research activities include: (1) modeling of air flow in a confined space; (2) review of several different gas-liquid contactors utilizing centrifugal force: (3) review of carbon dioxide reduction contactors in space vehicles and other enclosed structures: (4) application of modern optimal control theory to environmental control of confined spaces; (5) optimal control of class of nonlinear diffusional distributed parameter systems: (6) optimization of system reliability of life support systems and sub-systems: (7) modeling, simulation and optimal control of the human thermal system: and (8) analysis and optimization of the water-vapor eletrolysis cell.

Fan, L. T.↗
NASA NTRS2014

Non-Flammable Containment Bag and Enclosure Development for International Space Station Use

Work conducted on the International Space Station (ISS) requires the use of a significant quantity of containment bags to hold specimens, equipment, waste, and other material. The bags are in many shapes and sizes, and are typically manufactured from polyethylene materials. The amount of bags being used on ISS has grown to the point where fire safety has become a concern because of the flammability of polyethylene. Recently, a new re‐sealable bag design has been developed that is manufactured from a specialized non‐flammable material called Armorflex 301 that was designed specifically for this application. Besides being non‐flammable, Armorflex 301 is also FDA compliant, clear, flexible, and damage tolerant. The bags can be made with closure mechanisms that resemble ZipLoc® bags, or can be open top. Sample bags have been laboratory tested by NASA to verify materials properties, and evaluated by astronauts on the ISS in 2012. Flexloc bag manufacturing will commence in 2014 to support a transition away from polyethylene on ISS. In addition to re‐sealable bags, other larger containment systems such as flexible gloveboxes, deployable clean rooms, and other devices manufactured from Armorflex 301 are being explored for use on ISS and in similar confined space locations where flammability is an issue. This paper will describe the development of the Armorflex 301 material, the Flexloc bag, and other containment systems being explored for use in confined areas

Inamdar, Sunil↗
NASA NTRS1983

Beam-plasma interactions in a positive ion-negative ion plasma

An electron-free plasma consisting of negative ions /SF6(-)/ and positive ions /Ar(+)/, and negligible neutral-ion collision frequencies has been created in the laboratory. This plasma has a mass ratio of approximately 3.5-similar to many computer particle-in-cell simulated systems. A fluid description of this positive and negative ion confinement (PANIC) plasma is given and compared to experimental measurements of a beam-plasma instability for both beam species and a wide range of beam energies. The fluid dispersion relation and most growing modes are predicted to be insensitive to many parameters of the PANIC beam-plasma system, and found to the consistent with the data.

Intrator, T.↗
NASA NTRS2001

The sugar model: catalytic flow reactor dynamics of pyruvaldehyde synthesis from triose catalyzed by poly-l-lysine contained in a dialyzer

The formation of pyruvaldehyde from triose sugars was catalyzed by poly-l-lysine contained in a small dialyzer with a 100 molecular weight cut off (100 MWCO) suspended in a much larger triose substrate reservoir at pH 5.5 and 40 degrees C. The polylysine confined in the dialyzer functioned as a catalytic flow reactor that constantly brought in triose from the substrate reservoir by diffusion to offset the drop in triose concentration within the reactor caused by its conversion to pyruvaldehyde. The catalytic polylysine solution (400 mM, 0.35 mL) within the dialyzer generated pyruvaldehyde with a synthetic intensity (rate/volume) that was 3400 times greater than that of the triose substrate solution (12 mM, 120 mL) outside the dialyzer. Under the given conditions the final yield of pyruvaldehyde was greater than twice the weight of the polylysine catalyst. During the reaction the polylysine catalyst was poisoned presumably by reaction of its amino groups with aldehyde reactants and products. Similar results were obtained using a dialyzer with a 500 MWCO. The dialyzer method of catalyst containment was selected because it provides a simple and easily manipulated experimental system for studying the dynamics and evolutionary development of confined autocatalytic processes related to the origin of life under anaerobic conditions.

Biogenesis↗