Search NASA⌕ Search

SEARCH · Search NASA

Results for “Convective parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Characterization of oceanic post-cold frontal clouds and their model representation. Final report

Low-level clouds are ubiquitous over the oceans, and their impact on the Earth’ radiative budget is important. However, general circulation models (GCMs) that are used to represent our climate and its evolution still experience problems to represent their correct amount and radiative impact. In the extratropical latitudes (~30-60 N/S), cloud properties are strongly modulated by the occurrence of anti-cyclones (high pressure systems) and cyclones (low pressure systems). While deep clouds dominate in cyclones near the center and along the cold and warm fronts, low-level clouds populate the colder regions of the cyclones, and more specifically the region in the wake of the cold fronts, the post-cold frontal region (PCF). The GCMs mentioned above were found to underestimate the amount of these PCF clouds, and this caused errors in their representation of the amount of solar radiation at the surface of the southern hemisphere oceans, causing an excess in absorption and errors in long-term predictions. To better understand which processes are ill-represented in the GCMs to cause such issues, we used ground-based observations from the Eastern North Atlantic (ENA) ARM site and a high resolution regional model (called WRF) to examine the properties of PCF clouds. With the WRF model, we simulated the passage of a cold front at the ENA site using theoretically distinct representations of convection and the physics of the boundary layer. While these physical representations had little impact on the timing, structure and circulation of the cold front, we found a high sensitivity to how the large scale information was fed into the model. Errors rapidly developed if the incoming flow information was injected too far from the site, but 1000 km was found to be an optimal distance between the outer boundary and the ENA site for a realistic cold front passage. With this model, we then conducted a series of experiment where convection and boundary layer schemes were changed, and revealed that 1) the clouds were more sensitive to the convection than boundary layer schemes and 2) the interaction between the two has a large impact. Furthermore, changing the representation of the physics in the model had greater impacts on PCF clouds than changing the initial conditions. As large-scale models increase their spatial resolution, convection will eventually be resolved but it remains that their representation of the physics of the boundary layer will matter for the correct representation of shallow (low-level) clouds. Observations were used to find which large-scale information had a clear relationship with PCF cloud and precipitation properties, in view of helping with GCM parameterizations and evaluation. Both lower troposphere stability and surface forcing were found to be important for PCF clouds that experience more vigorous dynamics than their tropical or subtropical counterparts. For cloud base and top heights, a simple measure of the change in potential temperature between the surface and the 800 hPa was found to be a good predictor. This relationship was found to hold as well when using data from campaigns recently conducted in the southern ocean south of Tasmania. A recent GCM was found to succeed in representing similar relations. For cloud depth, water content, and different characteristics of precipitation both the temperature contrast between the surface and near-air and the near-surface wind speed had a strong relationship. To summarize, through observational constraints and regional model experiments, the project has provided guidance to evaluate GCMs and tools to improve their representation of low-level clouds in the extratropics. It has also highlighted differences in behavior between these clouds and those typically found in the subtropics, thus opening new avenues of research for shallow clouds in general.

54 ENVIRONMENTAL SCIENCES↗

A physics-based ensemble machine-learning approach to identifying a relationship between lightning indices and binary lightning hazard

To convert lightning indices generated by numerical weather prediction experiments into binary lightning hazard, a machine-learning tool was developed. This tool, consisting of parallel multilayer perceptron classifiers, was trained on an ensemble of planetary boundary layer schemes and microphysics parameterizations that generated four different lightning indices over 1 week. In a subsequent week, the multi-physics ensemble was applied and the machine-learning tool was used to evaluate the accuracy. Unintuitively, the machine-learning tool performed better on the testing dataset than the training dataset. Much of the error may be attributed to mischaracterizing the convection. The combination of the machine learning model and simulations could not differentiate between cloud-to-cloud lightning and cloud-to-ground lightning, despite being trained on cloud-to-ground lightning. It was found that the simulation most representative of the local operational model was the most accurate simulation tested.

54 ENVIRONMENTAL SCIENCES↗

Observations of Offshore Internal Boundary Layers

The growth of the marine internal boundary layer (MIBL, height h i ) with the shore-normal distance x, is a topic of continuing interest because of its applications in coastal dispersion, offshore wind farm siting, coastal air-sea fluxes and in evaporative ducting. Available data on MIBL are only scarce, given its difficult to measure the variability of coastal winds. During Coupled Air-Sea Processes and Electromagnetic Research (CASPER) campaigns an array of instrumentation was deployed to measure offshore spatial variability and its effect on electromagnetic wave propagation. Meteorological sensors (flux towers and remote sensing) were deployed along the coast of Point Mugu, California, on a research vessel and FLoating Instrument Platform (FLIP) provided surface layer and boundary layer observations. In this article, measurements from multiple remote sensing instruments, such as synchronized triple Doppler lidars, small boat operations with tethered lifting system, and radiosondes provide a holistic view of the MIBL growth and its spatial variability from the coast. A convective and stable MIBL observed during two intensive operating period days showed distinct growth characteristics off the coast of Point-Mugu. During stable stratified atmospheric conditions, an MIBL was observed at least up to 47 km from the coast. The growth of the MIBL within the nearshore adjustment zone was influenced by surrounding atmospheric, oceanographic, and topographic conditions. A new parameterization scheme is developed based on advection-diffusion balance equations accounting for upstream turbulence and compared with h i observations from Doppler lidar and profiles from small boat. An evaluation of existing IBL theories was also conducted.

54 ENVIRONMENTAL SCIENCES↗

A Study of Intermittent Turbulence in Stable Arctic Boundary Layers

Abstract Polar boundary layers are difficult to model due to the existence of intermittent turbulence within stable layers. Here we present a case study evaluation of coherent structures in a stable boundary layer observed during a series of flights with an uncrewed aircraft system (DataHawk2) on 19 October 2016 at Oliktok Point, Alaska as part of the ERASMUS (Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems) field campaign. During a sequence of five flights over a nine-hour period, 57 profiles of atmospheric properties (0–400 m a.g.l) were collected. Turbulence was identified using derived Richardson Number, temperature structure function parameter, and turbulence kinetic energy dissipation. Throughout all flights on this strongly stable day, intermittent turbulence was observed. These turbulent layers showed well-mixed potential temperature profiles embedded within otherwise stable potential temperature profiles; often resulting in a characteristic staircase pattern. Turbulent layers ranged from 1 to 30 m deep, with most individual layers being 1–2 m deep. Vertical propagation velocities of layers in the lower atmosphere were on the order of a few cm s −1 , typical of non-convective environments. In different regions of the profile, turbulence was driven by a different balance of buoyancy and shear forces, with turbulence in the near surface environment driven by strong shear forces overcoming strong resistance to buoyancy, while turbulence in elevated layers characterized by weaker shear forces overcoming weaker resistance to buoyancy. We discuss the potential of such datasets for improving subgrid parameterizations of small-scale turbulence embedded within stable boundary layers.

54 ENVIRONMENTAL SCIENCES↗

Understanding the distinct impacts of MCS and non-MCS rainfall on the surface water balance in the central US using a numerical water-tagging technique

Warm-season rainfall associated with mesoscale convective systems (MCSs) in the central US is characterized by higher intensity and nocturnal timing compared to rainfall from non-MCS systems, suggesting their potentially different footprints on the land surface. To differentiate the impacts of MCS and non-MCS rainfall on the surface water balance, a water tracer tool embedded in the Noah land surface model with multi-parameterization options (WT-Noah-MP) is used to numerically “tag” water from MCS and non-MCS rainfall separately during April to August (1997-2018) and track their transit in the terrestrial system. From the water-tagging results, over 50% of warm-season rainfall leaves the surface-subsurface system through evapotranspiration by the end of August, but non-MCS rainfall contributes a larger fraction. However, MCS rainfall plays a more important role in generating surface runoff. These differences are mostly attributed to the rainfall intensity differences. The higher intensity MCS rainfall tends to produce more surface runoff through infiltration excess flow and drives a deeper penetration of the rainwater into the soil. Over 70% of the top 10 percentile runoff is contributed by MCS rainfall, demonstrating its important contribution to local flooding. In contrast, lighter intensity non-MCS rainfall resides mostly in the top layer and contributes more to evapotranspiration through soil evaporation. Diurnal timing of rainfall has negligible effects on the flux partitioning for both MCS and non-MCS rainfall. Differences in soil moisture profiles for MCS and non-MCS rainfall and the resultant evapotranspiration suggest differences in their roles in soil moisture-precipitation feedbacks and ecohydrology.

Hu, Huancui↗

Effects from Time Dependence of Ice Nucleus Activity for Contrasting Cloud Types

Abstract The role of time-dependent freezing of ice nucleating particles (INPs) is evaluated with the “Aerosol–Cloud” (AC) model in 1) deep convection observed over Oklahoma during the Midlatitude Continental Convective Cloud Experiment (MC3E), 2) orographic clouds observed over North California during the Atmospheric Radiation Measurement (ARM) Cloud Aerosol Precipitation Experiment (ACAPEX), and 3) supercooled, stratiform clouds over the United Kingdom, observed during the Aerosol Properties, Processes And Influences on the Earth’s climate (APPRAISE) campaign. AC uses the dynamical core of the WRF Model and has hybrid bin–bulk microphysics and a 3D mesoscale domain. AC is validated against coincident aircraft, ground-based, and satellite observations for all three cases. Filtered concentrations of ice (>0.1–0.2 mm) agree with those observed at all sampled levels. AC predicts the INP activity of various types of aerosol particles with an empirical parameterization (EP), which follows a singular approach (no time dependence). Here, the EP is modified to represent time-dependent INP activity by a purely empirical approach, using our published laboratory observations of time-dependent INP activity. In all simulated clouds, the inclusion of time dependence increases the predicted INP activity of mineral dust particles by 0.5–1 order of magnitude. However, there is little impact on the cloud glaciation because the total ice is mostly (80%–90%) from secondary ice production (SIP) at levels warmer than about −36°C. The Hallett–Mossop process and fragmentation in ice–ice collisions together initiate about 70% of the total ice, whereas fragmentation during both raindrop freezing and sublimation contributes <10%. Overall, total ice concentrations and SIP are unaffected by time-dependent INP activity. In the simulated APPRAISE case, the main causes of persistence of long-lived clouds and precipitation are predicted to be SIP in weak embedded convection and reactivation following recirculation of dust particles in supercooled layer cloud.

54 ENVIRONMENTAL SCIENCES↗

Use of Remote Sensing and In-situ Observations to Develop and Evaluate Improved Representations of Convection and Clouds for the Accelerated Climate Model for Energy. Final report

Representation of unresolved cloud processes has been one of the most challenging problems in numerical modeling of the atmosphere. During the last decades, considerable efforts have been spent to better represent the collective effects of those processes in terms of resolved scales (see Arakawa 2004 for a review). Still, the progress on this problem has been unacceptably slow as pointed out by Randall et al. (2003). The large part of the difficulty is inherent in the artificial separation of atmospheric processes into the explicitly simulated resolved scales and the highly parameterized subgrid scales. Arakawa (2004) and Arakawa et al. (2011) suggested two plausible approaches to eliminate the problem of artificial separation of atmospheric processes: “parameterize everything” and “resolve everything”.

58 GEOSCIENCES↗

Response of the Current Climate to Land‐Ocean Contrasts in Parameterized Cumulus Entrainment

Abstract Cumulus entrainment substantially regulates the earth's climate but remains poorly constrained in global climate models. Recent studies have shown that cumulus bulk entrainment (or dilution) is particularly sensitive to continentality, with the entrainment rate in simulated maritime cumuli nearly double that of continental cumuli. This study examines the impacts of such land–ocean entrainment contrasts on the current climate using 21‐year simulations with the Geophysical Fluid Dynamics Laboratory's High‐Resolution Atmospheric Model (HIRAM). In response to a 25% reduction in the HIRAM entrainment parameter c 0 over land, precipitation over tropical land regions increases by up to 40%. Along with directly facilitating enhanced convective precipitation, this c 0 reduction induces an increase in soil moisture, which may contribute to a further enhancement of convective precipitation over land. A 25% c 0 reduction over the oceans leads to more widespread modifications of convection patterns, with the strongest signal in the tropical Pacific. Deep convection shifts upstream (eastward) there, inducing enhanced large‐scale ascent over the central Pacific with compensating subsidence and reduced humidity and precipitation over the western Pacific (WP). Land–ocean variations in c 0 project onto the Pacific Walker circulation, with the 25% land reduction strengthening it by 4% and the 25% ocean reduction weakening it by 14%. These changes are driven by variations in convective and large‐scale stratiform heating over the Pacific. While reduced c 0 over land enhances diabatic heating in the Maritime Continent to strengthen the Walker circulation, reduced c 0 over the oceans decreases diabatic heating in the WP to weaken the Walker circulation.

54 ENVIRONMENTAL SCIENCES↗

Accurate assessment of land–atmosphere coupling in climate models requires high-frequency data output

Land–atmosphere (L–A) interactions are important for understanding convective processes, climate feedbacks, the development and perpetuation of droughts, heatwaves, pluvials, and other land-centered climate anomalies. Local L–A coupling (LoCo) metrics capture relevant L–A processes, highlighting the impact of soil and vegetation states on surface flux partitioning and the impact of surface fluxes on boundary layer (BL) growth and development and the entrainment of air above the BL. A primary goal of the Climate Process Team in the Coupling Land and Atmospheric Subgrid Parameterizations (CLASP) project is parameterizing and characterizing the impact of subgrid heterogeneity in global and regional Earth system models (ESMs) to improve the connection between land and atmospheric states and processes. A critical step in achieving that aim is the incorporation of L–A metrics, especially LoCo metrics, into climate model diagnostic process streams. However, because land–atmosphere interactions span timescales of minutes (e.g., turbulent fluxes), hours (e.g., BL growth and decay), days (e.g., soil moisture memory), and seasons (e.g., variability in behavioral regimes between soil moisture and latent heat flux), with multiple processes of interest happening in different geographic regions at different times of year, there is not a single metric that captures all the modes, means, and methods of interaction between the land and the atmosphere. And while monthly means of most of the LoCo-relevant variables are routinely saved from ESM simulations, data storage constraints typically preclude routine archival of the hourly data that would enable the calculation of all LoCo metrics. Here, we outline a reasonable data request that would allow for adequate characterization of sub-daily coupling processes between the land and the atmosphere, preserving enough sub-daily output to describe, analyze, and better understand L–A coupling in modern climate models. A secondary request involves embedding calculations within the models to determine mean properties in and above the BL to further improve characterization of model behavior. Higher-frequency model output will (i) allow for more direct comparison with observational field campaigns on process-relevant timescales, (ii) enable demonstration of inter-model spread in L–A coupling processes, and (iii) aid in targeted identification of sources of deficiencies and opportunities for improvement of the models.

54 ENVIRONMENTAL SCIENCES↗

“Gray Zone” Simulations Using a Three-Dimensional Planetary Boundary Layer Parameterization in the Weather Research and Forecasting Model

Abstract Generating accurate weather forecasts of planetary boundary layer (PBL) properties is challenging in many geographical regions, oftentimes due to complex topography or horizontal variability in, for example, land characteristics. While recent advances in high-performance computing platforms have led to an increase in the spatial resolution of numerical weather prediction (NWP) models, the horizontal gridcell spacing (Δ x ) of many regional-scale NWP models currently fall within or are beginning to approach the gray zone (i.e., Δ x ≈ 100–1000 m). At these gridcell spacings, three-dimensional (3D) effects are important, as the most energetic turbulent eddies are neither fully parameterized (as in traditional mesoscale simulations) nor fully resolved [as in traditional large-eddy simulations (LES)]. In light of this modeling challenge, we have implemented a 3D PBL parameterization for high-resolution mesoscale simulations using the Weather Research and Forecasting Model. The PBL scheme, which is based on the algebraic model developed by Mellor and Yamada, accounts for the 3D effects of turbulence by calculating explicitly the momentum, heat, and moisture flux divergences in addition to the turbulent kinetic energy. In this study, we present results from idealized simulations in the gray zone that illustrate the benefit of using a fully consistent turbulence closure framework under convective conditions. While the 3D PBL scheme reproduces the evolution of convective features more appropriately than the traditional 1D PBL scheme, we highlight the need to improve the turbulent length scale formulation. Significance Statement The spatial resolution of weather models continues to increase at a rapid rate in accordance with the enhancement of computing power. As a result, smaller-scale atmospheric features become more explicitly resolved. However, most numerical models still ignore the impact of horizontal weather variations on boundary layer flows, which becomes more important at these smaller spatial scales. To address this issue, we have implemented a new modeling approach, using fundamental principles, which accounts for horizontal variability. Our results show that including three-dimensional effects of turbulence is necessary to achieve realistic boundary layer characteristics. This novel technique may be useful for many applications including complex terrain flows, pollutant dispersion, and surface–atmosphere interaction studies.

Juliano, Timothy W.↗

Effects of Lower Troposphere Vertical Mixing on Simulated Clouds and Precipitation Over the Amazon During the Wet Season

Planetary boundary layer (PBL) schemes parameterize unresolved turbulent mixing within the PBL and free troposphere (FT). Previous studies reported that precipitation simulation over the Amazon in South America is quite sensitive to PBL schemes and the exact relationship between the turbulent mixing and precipitation processes is, however, not disentangled. In this study, regional climate simulations over the Amazon in January–February 2019 are examined at process level to understand the precipitation sensitivity to PBL scheme. The focus is on two PBL schemes, the Yonsei University (YSU) scheme, and the asymmetric convective model v2 (ACM2) scheme, which show the largest difference in the simulated precipitation. During daytime, while the FT clouds simulated by YSU dissipate, clouds simulated by ACM2 maintain because of enhanced moisture supply due to the enhanced vertical moisture relay transport process: (a) vertical mixing within PBL transports surface moisture to the PBL top, and (b) FT mixing feeds the moisture into the FT cloud deck. Due to the thick cloud deck over Amazon simulated by ACM2, surface radiative heating is reduced and consequently the convective available potential energy is reduced. As a result, precipitation is weaker from ACM2. Two key parameters dictating the vertical mixing are identified, p , an exponent determining boundary layer mixing and λ , a scale dictating FT mixing. Sensitivity simulations with altered p , λ , and other treatments within YSU and ACM2 confirm the precipitation sensitivity. The FT mixing in the presence of clouds appears most critical to explain the sensitivity between YSU and ACM2.

54 ENVIRONMENTAL SCIENCES↗

Quantifying Uncertainty in Ice Particle Velocity–Dimension Relationships Using MC3E Observations

Abstract Ice particle terminal fall velocity ( V t ) is fundamental for determining microphysical processes, yet remains extremely challenging to measure. Current theoretical best estimates of V t are functions of Reynolds number. The Reynolds number is related to the Best number, which is a function of ice particle mass, area ratio ( A r ), and maximum dimension ( D max ). These estimates are not conducive for use in most models since model parameterizations often take the form , where ( α , β ) depend on habit and D max . A previously developed framework is used to determine surfaces of equally plausible ( α , β ) coefficients whereby ice particle size/shape distributions are combined with V t best estimates to determine mass- ( V M ) or reflectivity-weighted ( V Z ) velocities that closely match parameterized V M ,SD or V Z ,SD calculated using the ( α , β ) coefficients using two approaches. The first uses surfaces of equally plausible ( a , b ) coefficients describing mass ( M )–dimension relationships (i.e., ) to calculate mass- or reflectivity-weighted velocity from size/shape distributions that are then used to determine ( α , β ) coefficients. The second investigates how uncertainties in A r , D max , and size distribution N ( D ) affect V M or V Z . For seven of nine flight legs flown on 20 and 23 May 2011 during the Mesoscale Continental Convective Clouds Experiment (MC3E), uncertainty from natural parameter variability—namely, the variability in ice particle parameters in similar meteorological conditions—exceeds uncertainties arising from different A r assumptions or D max estimates. The combined uncertainty between A r , D max , and N ( D ) produced smaller variability in ( α , β ) compared to varying M ( D ), demonstrating M ( D ) must be accurately quantified for model fall velocities. Primary sources of uncertainty vary considerably depending on environmental conditions. Significance Statement Ice particle fall velocity is fundamental for numerous processes within clouds, and hence is a critical property that must be accurately represented in weather and climate models. Using aircraft observations of ice particle shapes and sizes obtained in clouds behind midlatitude thunderstorms, this work develops a new framework for estimating ice particle fall velocities and their uncertainty, including quantifying the importance of different uncertainty sources from cloud microphysics measurements. Natural parameter variability contributes the most uncertainty in ice particle fall velocity estimates, although other sources can also be important contributors to uncertainty in certain conditions. Additional work examining ice particle data is needed to further understand how dependent uncertainty in certain ice particle properties are to local environmental conditions.

Meteorology & Atmospheric Sciences↗

Boundary Layer Controls on the Shallow-to-Deep Cumulus Transition (Final Technical Report)

This project advanced our understanding of the processes governing cumulus cloud formation and provides an improved observational basis for validating earth system models. To be specific, the project used laser- and radar-remote sensors to examine the physical properties of updrafts that rise from earth’s surface and initiate clouds deeper in the atmosphere. These updrafts comprise “thermals” and “plumes” and occur at small spatial and temporal scales (e.g., 10s of minutes, 100s of meters). These small scales preclude explicit representation in most earth system and climate models, and thus necessitate “sub-grid-scale” parameterization of updraft processes. The innovation of this project was to directly measure the size, shape, strength and water vapor content of these updrafts with Doppler and Raman lidars, respectively, and to link these updraft properties to cloud processes using vertically pointed weather radars. The resulting data sets comprise 100s of thousands of updrafts and thousands of clouds, which far exceeds previous efforts, and thereby provides a robust statistical and physical representation of these processes. From these large datasets the project produced a sequence of scientific analyses that: (1) Elucidate how variations in the turbulent structure of the convective boundary layer control shallow cumulus convection, (2) Quantify the upward transport of water vapor to cloud base via thermals and plumes, (3) Validate large-eddy simulations of updrafts and shallow convective clouds, (4) Demonstrate a size-to-strength relationship between updraft width and updraft speed, and (5) Demonstrate how updrafts interact with the stability at the top of the convective boundary layer to modulate the depth and vigor of convective clouds. These results have been disseminated via several published journal articles, academic theses, and conference presentations. Collectively these results contribute to the Atmospheric System Research (ASR) program’s goal to “improve understanding of the key cloud, aerosol, precipitation, and radiation processes that affect the Earth’s radiative balance and hydrological cycle, particularly processes that limit the predictive ability of regional and global earth system models”.

54 ENVIRONMENTAL SCIENCES↗

Region and cloud regime dependence of parametric sensitivity in E3SM atmosphere model

Abstract The Department of Energy (DOE)’s Energy Exascale Earth System Model (E3SM), including its atmosphere model (EAM), has many relatively new features. In a previous study we conducted a systematic parametric sensitivity analysis for EAM based on short, perturbed parameter ensemble (PPE) simulations, mainly focusing on global mean climate features and metrics. While parameter values in global climate models are generally invariant in space and time, model response to parameters perturbation may vary by regions and climate regimes, which motivates the need to better understand the EAM model behaviors and physics at regional scale and process level. In this study, using the same set of PPE simulations and a similar sensitivity analysis framework, we identify parameters that cause largest sensitivities over different regions and compare model responses in fast atmospheric processes to the parameters across different cloud regimes for several important cloud-related fidelity metrics. We find that cloud forcing has opposite response to some parameters over mid-latitude vs. tropical land. We also analyze how the parametric sensitivity varies as stratocumulus transitions to shallow convection and to deep convection over ocean. Low cloud forcing and shortwave cloud forcing in the subtropical eastern Pacific are most sensitive to the parameters controlling the width of the probability density function (PDF) of the subgrid vertical velocity ( w’ ) ( gamma ) and the damping of the w’ skewness ( c8 ) near the coast but become more sensitive to the parameter affecting the damping of the w’ variance ( c1 ) further offshore. Detailed interpretation of the spatial dependence of parametric sensitivity is provided. We also investigate how the parametric sensitivity evolves with prediction duration. This study improves our process-level understanding of cloud physics and parameterization and provides insights for developing more advanced regime-aware parameterization schemes in global climate model.

54 ENVIRONMENTAL SCIENCES↗

The vertical-velocity skewness in the atmospheric boundary layer without buoyancy and Coriolis effects

One of the main features of near-neutral atmospheric boundary layer (ABL) turbulence is the positive vertical velocity skewness $Sk_w$ above the roughness sublayer or the buffer region in smooth-walls. The $Sk_w$ variations are receiving renewed interest in many climate-related parameterizations of the ABL given their significance to cloud formation and to testing sub-grid schemes for Large Eddy Simulations (LES). The vertical variations of $Sk_w$ are explored here using wind tunnel and flume experiments collected above smooth, rough, and permeable-walls in the absence of buoyancy and Coriolis effects. These laboratory experiments form a necessary starting point to probe the canonical structure of $Sk_w$ as they deal with a key limiting case (i.e., near-neutral conditions). Diagnostic models based on cumulant expansions, realizability constraints, and constant mass flux approach routinely employed in the convective boundary layer as well as prognostic models based on third-order budgets are used to explain variations in $Sk_w$ for the idealized laboratory conditions. The failure of flux-gradient relations to model $Sk_w$ from the gradients of the vertical velocity variance σ$_w^2$ are explained and corrections based on models of energy transport offered. Novel links between the diagnostic and prognostic models are also featured, especially for the inertial term in the third-order budget of the vertical velocity fluctuation. The co-spectral properties of w′/σ w vs w′ 2 /σ$_w^2$ are also presented for the first time to assess the dominant scales governing $Sk_w$ in the inner and outer layers, where w′ is the fluctuating vertical velocity and σ w is the vertical velocity standard deviation.>

Boundary layer flow↗

Linking Large-Scale Double-ITCZ Bias to Local-Scale Drizzling Bias in Climate Models

Tropical precipitation in climate models presents significant biases in both the large-scale pattern (i.e., double intertropical convergence zone bias) and local-scale characteristics (i.e., drizzling bias with too frequent drizzle/convection and reduced occurrences of no and heavy precipitation). By untangling the coupled system and analyzing the biases in precipitation, cloud, and radiation, this study shows that local-scale drizzling bias in atmospheric models can lead to large-scale double-ITCZ bias in coupled models by inducing convective-regime-dependent biases in precipitation and cloud radiative effects (CRE). The double-ITCZ bias consists of a hemispherically asymmetric component that arises from the asymmetric SST bias and a nearly symmetric component that exists in atmospheric models without the SST bias. By increasing light rain but reducing heavy rain, local-scale drizzling bias induces positive (negative) precipitation bias in the moderate (strong) convective regime, leading to the nearly symmetric wet bias in atmospheric models. By affecting the cloud profile, local-scale drizzling bias induces positive (negative) CRE bias in the stratocumulus (convective) regime in atmospheric models. Because the stratocumulus (convective) region is climatologically more pronounced in the southern (northern) tropics, the CRE bias is deemed to be hemispherically asymmetric and drives warm and wet (cold and dry) biases in the southern (northern) tropics when coupled to ocean. Our results suggest that correcting local-scale drizzling bias is critical for fixing large-scale double-ITCZ bias. Finally, the drizzling and double-ITCZ biases are not alleviated in models with mesoscale (0.25°–0.5°) or even storm-resolving (~3 km) resolution, implying that either large-eddy simulation or fundamental improvement in small-scale subgrid parameterizations is needed.

54 ENVIRONMENTAL SCIENCES↗

Characterizing Seasonal Variation of the Atmospheric Mixing Layer Height Using Machine Learning Approaches

As machine learning becomes more integrated into atmospheric science, XGBoost has gained popularity for its ability to assess the relative contributions of influencing factors in the atmospheric boundary layer height. To examine how these factors vary across seasons, a seasonal analysis is necessary. However, dividing data by season reduces the sample size, which can affect result reliability and complicate factor comparisons. To address these challenges, this study replaces default parameters with grid search optimization and incorporates cross-validation to mitigate dataset limitations. Using XGBoost with four years of data from the atmospheric radiation measurement (ARM) (Southern Great Plains (SGP) C1 site, cross-validation stabilizes correlation coefficient fluctuations from 0.3 to within 0.1. With optimized parameters, the R value can reach 0.81. Analysis of the C1 site reveals that the relative importance of different factors changes across seasons. Lower tropospheric stability (LTS, ~0.53) is the dominant factor at C1 throughout the year. However, during DJF, latent heat flux (LHF, 0.44) surpasses LTS (0.22). In SON, LTS (0.58) becomes more influential than LHF (0.18). Further comparisons among the four long-term SGP sites (C1, E32, E37, and E39) show seasonal variations in relative importance. Notably, during JJA, the differences in the relative importance of the three factors across all sites are lower than in other seasons. This suggests that boundary layer development in the summer is not dominated by a single factor, reflecting a more intricate process likely influenced by seasonal conditions such as enhanced convective activity, higher temperatures, and humidity, which collectively contribute to a balanced distribution of parameter impacts. Furthermore, the relative importance of LTS gradually increases from morning to noon, indicating that LTS becomes more significant as the boundary layer approaches its maximum height. Consequently, the LTS in the early morning in autumn exhibits greater relative importance compared to other seasons. This reflects a faster development of the mixing layer height (MLH) in autumn, suggesting that it is easier to retrieve the MLH from the previous day during this period. The findings enhance understanding of boundary layer evolution and contribute to improved boundary layer parameterization.

54 ENVIRONMENTAL SCIENCES↗