Search NASA⌕ Search

SEARCH · Search NASA

Results for “DATA DISPLAYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

A traverse gravimeter for the lunar surface

A semi-automatic, self-levelling lunar gravimeter was designed for the purpose of measuring gravity at predetermined stops along the route of a lunar rover vehicle to obtain a gravity profile. The traverse gravimeter is completely self-contained and is powered by an internal battery. The gravity sensor is a vibrating string accelerometer (VSA) which is enclosed in a precision oven. Gravity data are obtained by initiating a measurement. After the gravimeter has levelled, the VSA difference frequency is counted down and a gate is generated to enable a crystal-controlled clock to a BCD counter. The BCD counter stores the data which are a measurement of gravity. These data, displayed upon command by the astronaut, are transmitted by voice back to earth. It is expected that the accuracy of the gravimeter will be better than one milligal. Low power, light weight, reliability, and simplicity of operation are major considerations in the design of the gravimeter.

Mamon, G.↗
NASA NTRS1971

Construction and testing of a Scanning Laser Radar (SLR), phase 2

The scanning laser radar overall system is described. Block diagrams and photographs of the hardware are included with the system description. Detailed descriptions of all the subsystems that make up the scanning laser radar system are included. Block diagrams, photographs, and detailed optical and electronic schematics are used to help describe such subsystem hardware as the laser, beam steerer, receiver optics and detector, control and processing electronics, visual data displays, and the equipment used on the target. Tests were performed on the scanning laser radar to determine its acquisition and tracking performance and to determine its range and angle accuracies while tracking a moving target. The tests and test results are described.

Flom, T.↗
NASA NTRS1972

Interactive graphics system for IBM 1800 computer

A FORTRAN compatible software system that has been developed to provide an interactive graphics capability for the IBM 1800 computer is described. The interactive graphics hardware consists of a Hewlett-Packard 1300A cathode ray tube, Sanders photopen, digital to analog converters, pulse counter, and necessary interface. The hardware is available from IBM as several related RPQ's. The software developed permits the application programmer to use IBM 1800 FORTRAN to develop a display on the cathode ray tube which consists of one or more independent units called pictures. The software permits a great deal of flexibility in the manipulation of these pictures and allows the programmer to use the photopen to interact with the displayed data and make decisions based on information returned by the photopen.

Carleton, T. P.↗
NASA NTRS1972

A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 3: Concept analysis. Part 1: Technical

Information backing up the key features of the manipulator system concept and detailed technical information on the subsystems are presented. Space station assembly and shuttle cargo handling tasks are emphasized in the concept analysis because they involve shuttle berthing, transferring the manipulator boom between shuttle and station, station assembly, and cargo handling. Emphasis is also placed on maximizing commonality in the system areas of manipulator booms, general purpose end effectors, control and display, data processing, telemetry, dedicated computers, and control station design.

Source record↗
NASA NTRS1972

Space shuttle propulsion systems on-board checkout and monitoring system development study (extension). Volume 1: Summary and technical results

An analysis was conducted of the space shuttle propulsion systems to define the onboard checkout and monitoring function. A baseline space shuttle vehicle and mission were used to establish the techniques and approach for defining the requirements. The requirements were analyzed to formulate criteria for implementing the functions of preflight checkout, performance monitoring, fault isolation, emergency detection, display, data storage, postflight evaluation, and maintenance retest.

Source record↗
NASA NTRS1972

Natural Resource Information System. Volume 2: System operating procedures and instructions

A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

Source record↗
NASA NTRS1972

A traverse gravimeter for the lunar surface.

A semiautomatic, self-leveling lunar gravimeter has been designed for the purpose of measuring gravity at predetermined stops along the route of a Lunar Rover Vehicle to obtain a gravity profile. The Traverse Gravimeter is completely self-contained and is powered by an internal battery. The gravity sensor is a vibrating string accelerometer (VSA) which is enclosed in a precision oven. Gravity data are obtained by initiating a measurement. After the gravimeter has leveled, the VSA difference frequency is counted down and a gate is generated to enable a crystal-controlled clock to a BCD counter. The BCD counter stores the data which are a measurement of gravity. These data, displayed upon command by the astronaut, are transmitted by voice back to earth.

Mamon, G.↗
NASA NTRS1972

Measured and calculated mean flow properties of a two-dimensional, hypersonic, turbulent wake

The hypersonic turbulent wake produced by a wedge was studied experimentally and its properties were compared with predictions obtained from a numerical computation procedure. In the computation procedure several models for the eddy viscosity formulation of the turbulent transport were examined. Conventional-defect models and a modified mixing-length model were found to yield good predictions of the experimental data. The classical mixing-length model gave unrealistic results. The experimental data displayed similarity when velocity and temperature defects were scaled by the maximum defects and the transverse coordinate was scaled by the velocity-defect half-width.

Wagner, R. D.↗
NASA NTRS1972

Natural resources information system.

A computer-based Natural Resources Information System was developed for the Bureaus of Indian Affairs and Land Management. The system stores, processes and displays data useful to the land manager in the decision making process. Emphasis is placed on the use of remote sensing as a data source. Data input consists of maps, imagery overlays, and on-site data. Maps and overlays are entered using a digitizer and stored as irregular polygons, lines and points. Processing functions include set intersection, union and difference and area, length and value computations. Data output consists of computer tabulations and overlays prepared on a drum plotter.

Leachtenauer, J. C.↗
NASA NTRS1975

The problem of the man-space data interface during computer processing of data

The necessity is shown for data output at different processing stages to man, taking into account the processing level, the output objective, and the user. The use of the phototelegraph I/O computer device for this purpose is considered in detail, and several examples are given. It is shown that the type of output (shaded of halftone graphs), the scales, the compression, and the mutual position of the data are selected on the basis of the character of the data displayed.

Mamotko, Z. N.↗
NASA NTRS1977

Measuring mandibular motions

Mandibular motion along three axes is measured by three motion transducers on floating yoke that rests against mandible. System includes electronics to provide variety of outputs for data display and processing. Head frame is strapped to test subject's skull to provide fixed point of reference for transducers.

Dimeff, J.↗
NASA NTRS1976

Definition study for photovoltaic residential prototype system

A site evaluation was performed to assess the relative merits of different regions of the country in terms of the suitability for experimental photovoltaic powered residences. Eight sites were selected based on evaluation criteria which included population, photovoltaic systems performance and the cost of electrical energy. A parametric sensitivity analysis was performed for four selected site locations. Analytical models were developed for four different power system implementation approaches. Using the model which represents a direct (or float) charge system implementation the performance sensitivity to the following parameter variations is reported: (1) solar roof slope angle; (2) ratio of the number of series cells in the solar array to the number of series cells in the lead-acid battery; and (3) battery size. For a Cleveland site location, a system with no on site energy storage and with a maximum power tracking inverter which feeds back excess power to the utility was shown to have 19 percent greater net system output than the second place system. The experiment test plan is described. The load control and data acquisition system and the data display panel for the residence are discussed.

Shepard, N. F.↗
NASA NTRS1974

Free Drifting Buoys

Information was exchanged between people directly involved with the development, use, and/or potential use of free drifting buoys. Tracking systems and techniques, where methods and accuracy of optical, radio, radar, satellite, and sonic tracking of free-drifting buoys were discussed. Deployment and retrieval covering methods currently used or planned in the deployment and retrieval of free-drifting buoys from boats, ships, helicopters, fixed platforms, and fixed-wing aircraft were reported. Simulation, sensors, and data emphasizing the status of water circulation modeling, and sensors useful on free-drifting buoys, and data display and analysis were described.

Source record↗
NASA NTRS1976

Linear dimensionality of Landsat agricultural data with implications for classification

A model for the Landsat multispectral scanner data, representing a generalization of the commonly used Gaussian model, has been formulated and analyzed. The model hypothesizes that the data for different crop types essentially lie on distinct hyperplanes in the feature space. Tests of this model reveal that: (1) the agricultural data from any single acquisition (i.e., four-channel) of Landsat are essentially two dimensional, regardless of the crop type; and (2) the data from different sites and different stages of crop development all lie on planes which are parallel. These findings have significant implications for data display, classification, feature extraction, and signature extension.

Wheeler, S. G.↗
NASA NTRS1977

Significance of operator variation and the angle of illumination in lineament analysis on synoptic images

The significance of operator variation and the angle of illumination in acquired imagery is analyzed for lineament analysis. Five operators analyzed a LANDSAT image and four photographs of a plastic relief map illuminated at a low angle from varying directions of the Prescott, Arizona region. Significant differences were found in both number and length of the lineaments recognized by the different investigators for the images. The actual coincidence of lineaments recognized by the investigators for the same image is exceptionally low. Even the directional data on lineament orientation is significantly different from operator to operator and from image to image. Cluster analysis of the orientation data displays a clustering by operators rather than by images. It is recommended that extreme caution be taken before attempting to compare different investigators' results in lineament analysis.

Siegal, B. S.↗
NASA NTRS1977

Lunar spectral units - A northern hemispheric mosaic

The distribution of lunar spectral units has been studied with the aid of multispectral imaging using silicon vidicons. The employed method has been developed over the last few years. The lunar observations used in the study had been made on May 7, 1974 (UT) at the Table Mountain Observatory. Four narrow bandpass interference filters centered at 0.38, 0.56, 0.85, and 1.05 micrometers were used. In the data displays presented the large differences (as in visual albedo) between the mare and the uplands have been deliberately minimized to allow small variations between these two major regions to be studied. Most of the spectral units are quite distinct, with relatively sharp boundaries. Attention is given to the general characteristics of spectral units, the distribution of mare basalt types, and the distribution of orange glass and dark mantling material.

Johnson, T. V.↗
NASA NTRS1980

INFORM: An interactive data collection and display program with debugging capability

A computer program was developed to aid ASSEMBLY language programmers of mini and micro computers in solving the man machine communications problems that exist when scaled integers are involved. In addition to producing displays of quasi-steady state values, INFORM provides an interactive mode for debugging programs, making program patches, and modifying the displays. Auxiliary routines SAMPLE and DATAO add dynamic data acquisition and high speed dynamic display capability to the program. Programming information and flow charts to aid in implementing INFORM on various machines together with descriptions of all supportive software are provided. Program modifications to satisfy the individual user's needs are considered.

Cwynar, D. S.↗
NASA NTRS1979

A model for correlating damage and ultrasonic attenuation in composites

Ultrasonic attenuation data measured by the pulse-echo technique have been obtained versus load for two graphite-epoxy laminates and are presented. The attenuation-load data display distinct changes at load values associated with the initiation of transverse cracks in the weakest plies and with the knee in the bilinear stress-strain curve. It was intended to determine if a simplified diffraction model could be used to account for the attenuation changes. The basis of the diffraction model is that transverse cracks or delaminations, or both, initiating and progressing in the specimen under the area covered by the ultrasonic transducer would cause diffraction of the ultrasonic beam and changes in the measured attenuation.

Hayford, D. T.↗