Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Data for "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid"

This repository contains source data for key plots presented in the manuscript "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid." Experimental data that was analyzed in Igor Pro 8 are presented as the .pxp files used to generate individual sub-plots. Electronic spectral function calculations are provided as .txt files, in which consecutive rows refer to the meshgrid x coordinate, y coordinate, spectral function (and, where relevant, axis-projected local angular momentum). We additionally include the Wannier model and DFT-obtained bulk band structure on which the Wannier model was based. Files are named as the number of the figure in the manuscript to which they correspond, with additional details included where necessary. Details of file names: 2a_DOS_Lxz_Ek_KGM_40layer_xnum_800kpt_tot.txt: Density of states, xz-axis projected local orbital angular momentum, for 800 points along the K-Gamma-M path, for a 40-layer model. 2c_composite_y.pxp: ARPES (angle-resolved photoemission spectroscopy) spectra along the ky axis, including both a scan near the Fermi level and a scan at high kinetic energies. 2d_LCP_RCP_diff_Sect_20K.pxp: difference between ARPES constant energy cuts at T=20 K at E0 + 0.23 eV taken with left- and right-circularly polarized photons. The polarization-integrated intensity at the constant energy cut is also included. 2e_DOS_L45_E11pt79_m0pt25to0pt25_xnum_800kpt_tot.txt: Density of states, xz-projected local orbital angular momentum, and corresponding k-points in two dimensions from ab-initio electronic structure calculations for a constant-energy cut. 3a_[x]_[y]ps: ARPES cut under excitation at a fluence of x uJ/cm2, measured y ps after photoexcitation. Measurements were performed at 9 K. 3b_[x]: Energy distribution curves under excitation at a fluence x uJ/cm2 at selected delay times after photoexcitation. 4a_ImSigma_vs_temperature.pxp: Imaginary self energy (extracted from ARPES linewidths) at different energies above E0 for selected lattice temperatures. 4b_EELS_lowE.pxp: Electron energy loss spectrum over a low energy range 5b_diff_55m15.pxp: Difference between momentum-integrated Tr-ARPES traces at 55 uJ/cm2 and 15 uJ/cm2 photoexcitation. Time-dependent intensity at each energy level has been normalized to a maximum of 1 for each individual fluence prior to subtraction. 5d_invtau_at_EX_vs_fluence.pxp: decay rate at a specified energy EX for different excitation fluences, from single exponential fits. NOTE: Analyses based on the Wannier model presented here should cite both the associated Article and this dataset. For all other files in the repository, citing the dataset alone is sufficient.

Acharya, Rishi [University of Illinois] (ORCID:000↗

SPRUCE Terrestrial Laser Scanning of Experimental Plots, Beginning in 2015

This data set comprises terrestrial laser scanning (TLS) point clouds from the SPRUCE experimental plots located in the S1-Bog of the Marcell Experimental Forest (MEF) near Grand Rapids, Minnesota. In 2015 and 2020 the 12 experimental SPRUCE plots were scanned near peak foliage ("summer”). In 2016-2019 and 2021-2023 the 12 plots were scanned prior to green up ("spring”) and once near peak foliage (Table 1). Additional data will be added through summer 2025. A RIEGL VZ-1000 unit was used to collect all scans. Four TLS scans in each plot were registered to produce a single point cloud per plot using RiSCAN PRO v2.3 software. Up to six additional scans were registered to account for data occlusion when necessary. Point clouds are saved in LAS (*.las) 1.2 format. Point clouds were geo-registered to surveyed plot locations. There are 192 *.las files provided with this dataset.

54 ENVIRONMENTAL SCIENCES↗

VERAView

In order to support engineering analysis of Virtual Environment for Reactor Analysis (VERA) model results, the Consortium for Advanced Simulation of Light Water Reactors (CASL) needs a tool that provides visualizations of HDF5 files that adhere to the VERAOUT specification. VERAView provides an interactive graphical interface for the visualization and engineering analyses of output data from VERA. The Python-based software provides instantaneous 2D and 3D images, 1D plots, and alphanumeric data from VERA multi-physics simulations.

Lee, RonaldW.↗

Strand-Specific RNA-Seq Analyses of Fruiting Body Development in Coprinopsis cinerea

We report that the basidiomycete fungus Coprinopsis cinerea is an important model system for multicellular development. Fruiting bodies of C. cinerea are typical mushrooms, which can be produced synchronously on defined media in the laboratory. To investigate the transcriptome in detail during fruiting body development, high-throughput sequencing (RNA-seq) was performed using cDNA libraries strand-specifically constructed from 13 points (stages/tissues) with two biological replicates. The reads were aligned to 14,245 predicted transcripts, and counted for forward and reverse transcripts. Differentially expressed genes (DEGs) between two adjacent points and between vegetative mycelium and each point were detected by Tag Count Comparison (TCC). To validate RNA-seq data, expression levels of selected genes were compared using RPKM values in RNA-seq data and qRT-PCR data, and DEGs detected in microarray data were examined in MA plots of RNA-seq data by TCC. We discuss events deduced from GO analysis of DEGs. In addition, we uncovered both transcription factor candidates and antisense transcripts that are likely to be involved in developmental regulation for fruiting.

59 BASIC BIOLOGICAL SCIENCES↗

VERAView

In order to support engineering analysis of Virtual Environment for Reactor Analysis (VERA) model results, the Consortium for Advanced Simulation of Light Water Reactors (CASL) needs a tool that provides visualizations of HDF5 files that adhere to the VERAOUT specification. VERAView provides an interactive graphical interface for the visualization and engineering analyses of output data from VERA. The Python-based software provides instantaneous 2D and 3D images, 1D plots, and alphanumeric data from VERA multi-physics simulations.

Lee, Ronald W.↗

Replication Data for: Measurement of the mean number of muons with energies above 500 GeV in air showers detected with the IceCube Neutrino Observatory

<b>Measurement of the mean number of muons with energies above 500 GeV in air showers detected with the IceCube Neutrino Observatory</b> <br><br> This data release accompanies results submitted to Physical Review D describing the measurement of the average multiplicity of TeV muons with IceCube. It contains the data necessary to reproduce the main plots from the paper (Figs. 7 and 9), i.e. the numerical results for the average number of muons with energies above 500 GeV as a function of primary cosmic ray energy. <br><br> For any questions about this data release, please write to analysis@icecube.wisc.edu. <br><br> Files included in this release: <ul> <li>A README file <li>Files including data to reproduce the results plots from the paper (see below for details) <li>An example python script showing how to read and plot the data </ul> <br> <u>What is in the files icecube_Nmu500_X_Y.txt:</u> <br> Y indicates wether the file contains values obtained from experimental data (Y="data") or air-shower simulations (Y="MC"). <br> X indicates the hadronic interaction model for which the plot is made. If Y="data", this means that the experimental data was interpreted using this model. If Y="MC", it means that the simulations were performed with this model. The three models included are Sibyll 2.1, QGSJet-II.04, and EPOS-LHC (see paper for references). The file with X="modelaverage" gives the average over the three individual results with the deviations from the average included in the systematic uncertainties. <br><br> Please see the README file for details on how the data is structured in the files.

Astroparticle Physics↗

SPRUCE Peat Mercury, Methylmercury and Sulfur Concentrations from Experimental Plot Cores, 2012

This data set reports the results of analyses of peat core samples for total mercury and methylmercury, as well as carbon, nitrogen and sulfur. Samples were collected as part of a larger sampling campaign from the SPRUCE experimental study plots located in the S1-Bog. From 2012-08-13 to 2012-10-15, a team of SPRUCE investigators and collaborators collected core samples of peat in the SPRUCE experimental plots. The goal was to characterize the biological, physical, and chemical characteristics of peat, and how those characteristics changed throughout the depth profile of the bog, prior to the initialization of the SPRUCE experimental warming and CO2 treatments. Cores were collected from 16 experimental plots; peat cores were collected from the hummock and hollow surfaces to depths of 300 cm in 10 cm, 25, and 50 cm increments (Pierce et al, 2022). Three replicate cores were collected from both hummock and hollow locations in each plot. The coring locations within each plot were mapped. This dataset contains one file in comma separated (*.csv) format. User Note: The coring descriptions and some reported data are the same as in the related data set, Iverson et al. (2014). Samples for mercury and carbon, nitrogen and sulfur analyses by the University of Minnesota were collected as part of this sampling campaign.

54 ENVIRONMENTAL SCIENCES↗

Determination of light quark masses from {eta}{yields}3{pi}{sup 0}

We provide a model-independent determination of the quantity B{sub 0}(m{sub d}-m{sub u}). Our approach rests only on chiral symmetry and data from the decay of the eta into three neutral pions. Since the low-energy prediction at next-to-leading order fails to reproduce the experimental results, we keep the strong interaction correction as an unknown parameter. As a first step, we relate this parameter to the quark mass difference using data from the Dalitz plot. A similar relation is obtained using data from the decay width. Combining both relations we obtain B{sub 0}(m{sub d}-m{sub u})=(4495{+-}440) MeV{sup 2}. The preceding value, combined with lattice determinations, leads to the values m{sub u}(2 GeV)=(2.9{+-}0.8) MeV and m{sub d}(2 GeV)=(4.7{+-}0.8) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soil properties and root characteristics across four lowland Panamanian forests from 0 - 1 m soil depths

Objectives:Fine roots significantly influence ecosystem-scale cycling of nutrients, carbon (C), and water, yet there is limited understanding of how fine root traits vary across and within tropical forests, some of Earth's most C-rich ecosystems. The biomass of fine roots can impact soil carbon storage, as root mortality is a primary source of new carbon to soils. A positive relationship has been observed between fine root biomass and soil carbon stocks in Panama (Cusack et al 2018). Beyond biomass, root characteristics like specific root length (SRL) could also influence soil carbon, as roots with higher SRL are less dense and thinner, potentially decomposing more easily or promoting soil aggregation. Understanding the effects of root morphology and tissue quality on soil carbon storage and with soil properties in general can improve predictions of landscape-scale carbon patterns. We aggregated new data of root biomass, morphology and nutrient content at 0-10 cm, 10-20 cm, 20-50 cm and 50-100 cm depth increments across four distinct lowland Panamanian forests and paired with already published datasets (Cusack et al 2018; Cusack and Turner 2020) of soil chemistry from the same sites and soil depths to explore relationship between soil carbon stocks and root characteristics.Datasets included:The datasets provided include .csv and .xlsx files for fine root characteristics and soil chemistry from four different forests across 0-10 cm, 10-20 cm, 20-50 cm, and 50-100 cm depth increments. Root characteristics include live fine root biomass, dead fine root biomass, coarse root biomass, specific root length, root diameter, root tissue density, specific root area, root %N, root %C, and root C/N ratio. Soil chemistry data includes total carbon (TC), dissolved organic carbon (DOC), bulk density, total phosphorus (TP), available phosphorus (AEM Pi), and various Mehlich-extractable elements such as aluminum, calcium, iron, potassium, manganese, phosphorus, and zinc. Nitrogen content measures include ammonium, nitrate, total dissolved nitrogen (TDN), dissolved inorganic nitrogen (DIN), and dissolved organic nitrogen (DON). The dataset also includes total exchangeable bases (TEB) and effective cation exchange capacity (ECEC) in both centimoles of charge per kilogram and micromoles of charge per gram. The soil chemistry data was obtained from Cusack et al (2018) and Cusack and Turner (2020) and paired with root characteristics data for the same depth increments and sites. Additionally, a .kml file is provided with coordinates for all 32 plots included in the study across four forests (n = 8 plots per site). Root data was averaged across these 8 plots per site and soil data was collected in one pit in each site. This dataset serves as baseline data before a throughfall exclusion experiment, Panama Rainforest Changes with Experimental Drying (PARCHED), was implemented. No special software is needed to open these files.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Whole Ecosystems Warming (WEW) Environmental Data Beginning August 2015

This data set provides a record of the half-hourly averages of automated environmental data collected for 12 SPRUCE plots (4, 6, 7, 8, 10, 11, 13, 16, 17, 19, 20, and 21) beginning during deep peat heating (DPH) and continuing throughout the whole ecosystem warming (WEW) manipulations for the SPRUCE Project (Hanson et al. 2017). In August 2015, WEW was initiated at 5 warming levels (+0, +2.25 +4.5, +6.75 and +9 °C) with 2 plots per warming level. DPH measurements were underway before the initiation of WEW heating treatments and both are expected to operate through 2025. This current version includes data from 2014 through 2024. This data set includes 15 data files provided in comma separated (*.csv) format: 12 individual data files for each of the monitored SPRUCE plots, two data files corresponding to figures from Hanson et al. (2017) that support key analyses of the performance of the WEW systems, and one data file containing snow and ice depths.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Ground Observations of Phenology in Experimental Plots, 2016-2017

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during the 2+ years (August 2015 through December 2017) of whole-ecosystem warming. For 2016, only springtime (April - June) phenological events are included. For 2017 (April - December), spring and autumn events are included. Beginning in April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date reported here is the first survey date on which an event/phenophase was definitively observed. User note: Ground observations of phenology from 2016-2021 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

Arctic shrub size and leaf traits, northern Alaska, summer 2017 (Version 2.0)

This data package contains leaf and size trait and environmental data collected from 170 plots of rapidly expanding shrub genera (Alnus, Betula, and Salix) and a widespread sedge (Eriophorum vaginatum) along a latitudinal and climate gradient in northern Alaska. The trait data were collected in summer 2017 and include leaf area, specific leaf area, leaf nitrogen concentration, leaf delta 15N, leaf delta 13C, shrub height, aboveground biomass, and the ratio of root biomass to aboveground biomass. These raw data support a submitted manuscript that examines the intraspecific variations of size, leaf and root traits of shrubs across the graminoid-dominated nutrient-poor arctic tundra and reveals the environmental drivers of deciduous shrub traits in tundra ecosystems (Fraterrigo et al., submitted). Data are presented by site (n=5) and patch (shrub or sedge plot) in separate csv files. The location data are provided in the “plot coordinates” file; all other files contain the data in the file title. Detailed methods are in the submitted manuscript. A companion data package contains root trait data collected simultaneously from the same plots (Fraterrigo and Chen, 2020). See the "Related references" section for more information.2023/07/20 Update: The latest version of this dataset publication is version 2.0. The latest version of the data package was updated to correct the leaf size trait.csv file.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Shear Properties for APO/MBI Syntactic Foam

Triaxial compression testing is a means for mechanical characterization of a material. A unique feature of the triaxial compression test is the application of two different magnitudes of compressive pressures on the material simultaneously. The material behavior under these different compressive pressures can be monitored over time. Several important characteristics of the material, such as stress yield values and the shear failure envelope may then be determined. Also mechanical properties such as Poisson’s ratio, Young’s modulus and bulk modulus can be determined from the triaxial compression test. The triaxial compression test was employed in this investigation to characterize the shear behavior, shear failure envelope, and mechanical properties of a syntactic foam. Los Alamos National Laboratory (LANL) supplied a total of 36 samples of APO-BMI syntactic foam to the University of New Mexico, Department of Civil Engineering for testing between December 2003 and May 2004. Each sample had a diameter of 1.395±0.005 in. (3.543±0.013cm.) and a length of 2.796±0.004 in. (7.102±0.010 cm.). The samples had an average density of 0.295 g/cm3. Additional information about the material tested in this investigation can be found in the “Specimen Description” section contained in Chapter 1. The nomenclatures used in this study is presented in Chapter 1. In addition to designing and implementing triaxial compression tests capable of up to 2,000 psi. confining pressure (minor principal stress) and roughly 13,000 psi. in axial pressure (major principal stress), a pure tension test was designed and conducted on the foam material. The purpose of this pure tension test was to obtain maximum tensile stress values to enhance the characterization of the shear envelope in the stress space. The sampling procedure and specimen preparation for a standard test can be found in the American Society for Testing Materials (ASTM) D 5379/ D 5379 – 93. The above tests mentioned and their procedures are discussed in Chapter 2. Chapter 2 contains the types of tests performed and the apparatus used for testing the material. Chapter 2 also has a brief explanation of the equipment and the procedures used for conducting the tests. In Chapter 3, the material characteristics and mechanical properties obtained from the tests are described; composite plots of deviatoric vs. mean stress and deviatoric stress vs. longitudinal strain are also included. The plots of deviatoric stress vs. mean stress clearly identify the shear envelope for the material. Chapter 4 summarizes the vital information obtained from the tests and the conclusions made. All the necessary plots and the data generated during the testing have been included in the Appendix. The information in the appendix includes plots of: Strain vs. Time, Stress vs. Time, Stress vs. Strain, Mean Stress vs. Volumetric Strain, Lateral Strain vs. Longitudinal Strain, and q vs. p. Bulk modulus, Poisson’s ratio, and Young’s modulus are displayed in the appropriate plots in each appendix.

36 MATERIALS SCIENCE↗

Design and implementation of a data analysis pipeline for paper spray ionization mass spectrometry of UO 2 Cl 2

Ambient mass spectrometry is an emerging characterization method for nuclear materials analysis. SRNL has recently acquired a new JEOL AccuTOF™-DART® LP 4G with a Filter Spray™ front end sample injection system, to develop new methods for ambient mass spectrometry of uranium analytes. Preliminary measurements of uranium-containing samples have demonstrated a need to rapidly evaluate large datasets generated with tailored data analysis scripts. To address this gap a data analysis pipeline written in R within the R Studio environment has been developed. The pipeline comprises a series of processing steps where the data are ingested, analyte peaks of interest are extracted, subsequent ratio and normalization calculations are performed, and results are presented in a series of graphical plots. In detail, the data files containing up to several hundred chronological spectra of a single sample in netCDF format were first extracted into RStudio. Then, initial 3D plots of the data were created in respect to the time, intensity, and mass to charge domains. These graphics serve as an initial easily visualized survey of instrument data. Next, a .csv format file containing the names, masses, and abundances of isotopes of interest were ingested into RStudio and were used to automatically collect intensity values at the mass value. Uranium isotope ratios were plotted against gadolinium isotope ratios (gadolinium was used as an internal standard) and assessed for ion beam stability and intensity. The spectra were filtered by applying a threshold intensity for the 158GdO+ mass channel. A Monte Carlo experiment was performed by creating a theoretical distribution of the data in order to determine the ratio of the uranium isotopes. The results show that the developed data analysis pipeline successfully filters high quality data from overall poor quality runs. Our results also support the idea that paper spray ionization mass spectrometry can be used for both detection and quantification of trace amounts of uranium compounds.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implementation of Plot File Testing in the DYNA3D/ParaDyn Software Quality Assurance Suite

Automated testing of DYNA3D/ParaDyn plot files was added to the DYNA3D/ParaDyn software quality assurance (SQA) test suite. The new capability extracts select data from the plot files generated during each verification run and compares it to the same baseline answers used to verify the problem. Deviations between baseline answers and plot file values are reported in the same manner as solution discrepancies, and differences in precision levels between the baseline answers and plot file results are accounted for. The new testing leverages the existing SQA test suite framework and test problems and the Python Mili reader and minimally increases the overall run time (< 5%) of the SQA test suite. This new capability provides incremental end-toend testing of the most common DYNA3D/ParaDyn simulation workflows.

42 ENGINEERING↗

Trajectory analysis with geometric features

Described herein are various technologies pertaining to extracting one or more features from trajectory data recorded during motion of a body, and further, generating a n-dimensional feature vector based upon the one or more extracted features. The n-dimensional feature vector enables expedited analysis of the trajectory data from which the feature vector was generated. For example, rather than having to analyze a trajectory curve comprising a large number of time-position data points, the n-dimensional feature vector can be compared with one or more search parameters to facilitate clustering of the trajectory data associated with the n-dimensional feature vector with other trajectory data which also satisfies the search request. The trajectory data can be plotted on a screen in combination with the n-dimensional feature vector, and other pertinent information. The trajectory data, etc., can be displayed using heat maps or other graphical representation.

Wilson, Andrew T.↗

Trajectory prediction via a feature vector approach

Described herein are various technologies pertaining to extracting one or more features from trajectory data recorded during motion of a body, and further, generating a n-dimensional feature vector based upon the one or more extracted features. The n-dimensional feature vector enables expedited analysis of the trajectory data from which the feature vector was generated. For example, rather than having to analyze a trajectory curve comprising a large number of time-position data points, the n-dimensional feature vector can be compared with one or more search parameters to facilitate clustering of the trajectory data associated with the n-dimensional feature vector with other trajectory data which also satisfies the search request. The trajectory data can be plotted on a screen in combination with the n-dimensional feature vector, and other pertinent information. The trajectory data, etc., can be displayed using heat maps or other graphical representation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Arctic shrub root traits, northern Alaska, summer 2017 (Version 2.0)

This data package contains root trait data collected from 170 plots of rapidly expanding shrub genera (Alnus, Betula, and Salix) and a widespread sedge (Eriophorum vaginatum) along a latitudinal and temperature gradient in northern Alaska. The trait data were collected in July 2017 and include root architecture (root diameter and branching patterns), mycorrhizal colonization (%), nitrogen concentration (%), delta 15N (per mil), and vertical root biomass. These raw data support a submitted manuscript that examines the distribution and interspecific variations of absorptive root traits of shrubs and graminoids across the graminoid-dominated nutrient-poor arctic tundra and reveals how deciduous shrub expansion affects plant nutrient acquisition strategies in tundra ecosystems. Data are presented by site (n=5) and patch (shrub or sedge plot) in separate csv files. The location data are provided in the “plot coordinates” file; all other files contain the data in the file title. Detailed methods are in Chen et al. (2020).2023/07/20 Update: The latest version of this dataset publication is version 2.0. The latest version of the data package was updated to include the alder nodule biomass dataset (alder nodule biomass.csv) and associated metadata (metadata_alder nodule biomass.csv). The name of the previous metadata file was updated (metadata_ root traits and biomass.csv ) to distinguish it from the new metadata file.

54 ENVIRONMENTAL SCIENCES↗