Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diabatization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Estimates of tropical analysis differences in daily values produced by two operational centers

To assess the uncertainty of daily synoptic analyses for the atmospheric state, the intercomparison of three First GARP Global Experiment level IIIb datasets is performed. Daily values of divergence, vorticity, temperature, static stability, vertical motion, mixing ratio, and diagnosed diabatic heating rate are compared for the period of 26 January-11 February 1979. The spatial variance and mean, temporal mean and variance, 2D wavenumber power spectrum, anomaly correlation, and normalized square difference are employed for comparison.

Kasahara, Akira↗

Issues in establishing causes of the 1988 drought over North America

The causes and physical mechanisms involved in the 1988 North American drought are investigated. The issue of when the drought circulation anomalies developed and their relation to changes in tropical Pacific SSTs is examined. The evolution of the Pacific SSTs and tropical convection, as revealed by outgoing LW radiation, is shown to be consistent with the development of the conditions favorable for initiating the drought circulation pattern in April through June of 1988. On the equator at 110 deg W, SST anomalies exceeded -2.75 C only in April, May, and June, and were largest (-4.1 C) in May 1988. Diagnostic calculations of atmospheric diabatic heating confirm that atmospheric heating anomalies existed in the tropical Pacific in association with the major SST anomalies during this time. It is argued that feedback-caused soil moisture anomalies were secondary sources for the drought circulation but could not have been the primary instigator.

Trenberth, Kevin E.↗

An evaluation of the structure of tropical intraseasonal oscillations in three general circulation models

The attributes for the simulation of tropical intraseasonal oscillations in the 30 to 60 day range by three GCMs are compared with analyses of the European Center for Medium-Range Weather Forecasts. Models under consideration include the Goddard Laboratory of Atmospheric sciences (GLAS), Goddard Laboratory for Atmospheres (GLA), and UCLA GCMs. They are characterized by the same resolutions of four degrees latitude by five degrees longitude with 9 levels. Observations reveal that the eastward traveling planetary scale structure becomes more stationary over the Indonesian region and accelerates over the Central Pacific. In the tropics a Kelvin wave-type structure is found to be dominant near the center of the oscillation. The simulated winds are realistic although the meridional component is too strong, especially in the GLA GCM. The differences in the structure of the oscillation in the GLAS GCM and GLA GCM are considered to be a consequence of the different numerical schemes used. The GCMs are characterized by preferred zones for diabatic heating, with a turn-on heating occurring when the rising branch of the intraseasonal oscillation passes over these convective regions.

Park, Chung-Kyu↗

A GCM case study on the maintenance of short-term subtropical wind maxima in the summer hemisphere during SOP-1, FGGE

In order to substantiate earlier findings of pronounced short-term deviations in Southern Hemisphere tropical convection during the first Special Observing Period (SOP-1) of FGGE, the hypothesis that the observed summertime subtropical wind maxima were strengthened by episodes of enhanced tropical divergence is numerically tested using a fourth-order GCM. FGGE observational data for January 6-20, 1979 suggested that strong convection over the South Pacific helped to maintain a nearby subtropical jet. The dominant term in the zonal momentum budget was the Coriolis force applied to the diabatically driven meridional circulation. The present GCM study simulates these processes to a reasonable degree of accuracy. Experimental reduction of the latent energy supplied to the GCM is used to substantiate that summertime subtropical westerly maxima are largely forced by divergent outflow from the tropics.

Hurrell, James W.↗

Atmosphere and climate studies of Mars using the Mars Observer pressure modulator infrared radiometer

Studies of the climate and atmosphere of Mars are limited at present by a lack of meteorological data having systematic global coverage with good horizontal and vertical resolution. The Mars Observer spacecraft in a low, nearly circular, polar orbit will provide an excellent platform for acquiring the data needed to advance significantly our understanding of the Martian atmosphere and its remarkable variability. The Mars Observer pressure modulator infrared radiometer (PMIRR) is a nine-channel limb and nadir scanning atmospheric sounder which will observe the atmosphere of Mars globally from 0 to 80 km for a full Martian year. PMIRR employs narrow-band radiometric channels and two pressure modulation cells to measure atmospheric and surface emission in the thermal infrared. PMIRR infrared and visible measurements will be combined to determine the radiative balance of the polar regions, where a sizeable fraction of the global atmospheric mass annually condenses onto and sublimes from the surface. Derived meteorological fields, including diabatic heating and cooling and the vertical variation of horizontal winds, are computed from the globally mapped fields retrieved from PMIRR data.

Mccleese, D. J.↗

A reexamination of the radiative balance of the stratosphere

The radiative balance of the stratosphere is examined in the light of the possible sensitivity of tracers to small changes in the diabatic heating. A comprehensive radiative transfer algorithm is developed on the basis of accurate and efficient methods for use in coupled stratospheric models of chemistry, dynamics, and radiative transfer, and the individual components of the code are validated against available line-by-line calculations. Finally, the results of different approximations commonly employed in radiative transfer algorithms are compared, and their effects on tracer transport are evaluated using a 2D ozone model.

Olaguer, Eduardo P.↗

The modulation of the low-latitude radiation budget by cloud and surface forcing on interannual time scales

Regionally confined interannual perturbations in the tropical radiation budget associated with east-west circulations are examined along with the forcing mechanisms of these perturbations in relation to surface and cloudiness variability. A zonal harmonic analysis of emitted longwave radiation emphasizes that these variations are largely controlled at the planetary wave scale. The overall effect leads to an approximately 50 deg/yr propagation phase speed that is considerably slower than the oceanic Kelvin wave capable of driving east-west longwave (LW) anomalies through SST feedback. Examination of the time-dependent radiative energetics over the tropics reveals that the aforementioned anomaly LW propagation is mainly due to cloud forcing associated with east-west circulation changes. Diabatic heating associated with coupled ocean-atmosphere feedback appears to be larger responsible for the LW anomaly propagation.

Sohn, Byung-Ju↗

Equatorial superrotation in a slowly rotating GCM - Implications for Titan and Venus

The GISS GCM is used here to examine the hypothesis that equatorial superrotation on slowly rotating planets is sensitive to the nature of the vertical radiative heating profile and can exist in the absence of diurnally varying forcing. The general circulation, diabatic heating, and thermal structure produced in the experiments are described and the heat and angular momentum budgets and energy cycles are analyzed to understand the factors conducive to equatorial superrotation. The implications of the results for future planetary missions are addressed.

Del Genio, Anthony D.↗

Martian global dust storms - Zonally symmetric numerical simulations including size-dependent particle transport

A zonally symmetric primitive-equation grid-point model of the Martian atmosphere is coupled with an aerosol transport/microphysical model in order to numerically investigate the size-dependent transport of dust particles in the Martian atmosphere. The coupled model accounts for diabatic heating due to a radiatively active evolving dust field, but neglects feedbacks between atmosphere-surface interactions and surface dust lifting. The differing suspension lifetimes of dust particles of various sizes (radius = 1-80 microns), in conjunction with spatially varying atmospheric dynamics, result in latitudinal differences in several measurements of the column integrated particle concentration. This work indicates the importance of considering the full range of particle sizes (and shapes) of the suspended dust during Martian global dust storms and their impact upon the spatial extent and wavelength-dependent radiative influence of such storms.

Murphy, James R.↗

On the one-dimensional theory of steady compressible fluid flow in ducts with friction and heat addition

Steady, diabatic (nonadiabatic), frictional, variable-area flow of a compressible fluid is treated in differential form on the basis of the one-dimensional approximation. The basic equations are first stated in terms of pressure, temperature, density, and velocity of the fluid. Considerable simplification and unification of the equations are then achieved by choosing the square of the local Mach number as one of the variables to describe the flow. The transformed system of equations thus obtained is first examined with regard to the existence of a solution. It is shown that, in general, a solution exists whose calculation requires knowledge only of the variation with position of any three of the dependent variables of the system. The direction of change of the flow variables can be obtained directly from the transformed equations without integration. As examples of this application of the equations, the direction of change of the flow variables is determined for two special flows. In the particular case when the local Mach number m = 1, a special condition must be satisfied by the flow if a solution is to exist. This condition restricts the joint rate of variation of heating, friction, and area at m = 1. Further analysis indicates that when a solution exists at this point it is not necessarily unique. Finally it is shown that the physical phenomenon of choking, which is known to occur in certain simple flow situations, is related to restrictions imposed on the variables by the form of the transformed equations. The phenomenon of choking is thus given a more general significance in that the transformed equations apply to a more general type of flow than has hitherto been treated. (author)

HIGH-SPEED↗

Features of a SINDA/FLUINT model of a liquid oxygen supply line

The modeling features used in a steady-state heat transfer problem using SINDA/FLUINT are described. The problem modeled is a 125 feet long, 3 inch diameter pipe, filled with liquid oxygen flow driven by a given pressure gradient. The pipe is fully insulated in five sections. Three sections of 1 inch thick spray-on foam and two sections of vacuum jacket. The model evaluates friction, turns losses and convection heat transfer between the fluid and the pipe wall. There is conduction through the foam insulation with temperature dependent thermal conductivity. The vacuum space is modeled with radiation and gas molecular conduction, if present, in the annular gap. Heat is transferred between the outer surface and surrounding ambient by natural convection and radiation; and, by axial conduction along the pipe and through the vacuum jacket spacers and welded seal flanges. The model makes extensive use of SINDA/FLUINT basic capabilities such as the GEN option for nodes and conductors (to generate groups of nodes or conductors), the SIV option (to generate single, temperature varying conductors), the SIM option (for multiple, temperature varying conductors) and the M HX macros for fluids (to generate strings of lumps, paths, and ties representing a diabatic duct). It calls subroutine CONTRN (returns the relative location in the G-array of a network conductor, given an actual conductor number) enabling an extensive manipulation of conductor (calculates an assignment of their values) with DO loops. Models like this illustrate to the new and even to the old SINDA/FLUINT user, features of the program that are not so obvious or known, and that are extremely handy when trying to take advantage of both, the automation of the DATA headers and make surgical modifications to specific parameters of the thermal or fluid elements in the OPERATIONS portion of the model.

Simmonds, Boris G.↗

Examples of data assimilation in mesoscale models

The keynote address was the problem of physical initialization of mesoscale models. The classic purpose of physical or diabatic initialization is to reduce or eliminate the spin-up error caused by the lack, at the initial time, of the fully developed vertical circulations required to support regions of large rainfall rates. However, even if a model has no spin-up problem, imposition of observed moisture and heating rate information during assimilation can improve quantitative precipitation forecasts, especially early in the forecast. The two key issues in physical initialization are the choice of assimilating technique and sources of hydrologic/hydrometeor data. Another example of data assimilation in mesoscale models was presented in a series of meso-beta scale model experiments with and 11 km version of the MASS model designed to investigate the sensitivity of convective initiation forced by thermally direct circulations resulting from differential surface heating to four dimensional assimilation of surface and radar data. The results of these simulations underscore the need to accurately initialize and simulate grid and sub-grid scale clouds in meso- beta scale models. The status of the application of the CSU-RAMS mesoscale model by the NOAA Forecast Systems Lab for producing real-time forecasts with 10-60 km mesh resolutions over (4000 km)(exp 2) domains for use by the aviation community was reported. Either MAPS or LAPS model data are used to initialize the RAMS model on a 12-h cycle. The use of MAPS (Mesoscale Analysis and Prediction System) model was discussed. Also discussed was the mesobeta-scale data assimilation using a triply-nested nonhydrostatic version of the MM5 model.

Carr, Fred↗

Session on modeling of radiative transfer processes

The session on modeling of radiative transfer processes is reviewed. Six critical issues surfaced in the discussion concerning scale-interactive radiative processes relevent to the mesoscale convective systems (MCS's). These issues are the need to expand basic knowledge of how MCS's influence climate through extensive cloud shields and increased humidity in the upper troposphere; to improve radiation parameterizations used in mesoscale and General Circulation Model (GCM) models; to improve our basic understanding of the influence of radiation on MCS dynamics due to diabatic heating, production of condensate, and vertical and horizontal heat fluxes; to quantify our understanding of radiative impacts of MCS's on the surface and free atmosphere energy budgets; to quantify and identify radiative and microphysical processes important in the evolution of MCS's; and to improve the capability to remotely sense MCS radiative properties from space and ground-based systems.

Flatau, Piotr↗

A diagnostic model to estimate winds and small-scale drag from Mars Observer PMIRR data

Theoretical and modeling studies indicate that small-scale drag due to breaking gravity waves is likely to be of considerable importance for the circulation in the middle atmospheric region (approximately 40-100 km altitude) on Mars. Recent earth-based spectroscopic observations have provided evidence for the existence of circulation features, in particular, a warm winter polar region, associated with gravity wave drag. Since the Mars Observer PMIRR experiment will obtain temperature profiles extending from the surface up to about 80 km altitude, it will be extensively sampling middle atmospheric regions in which gravity wave drag may play a dominant role. Estimating the drag then becomes crucial to the estimation of the atmospheric winds from the PMIRR-observed temperatures. An interative diagnostic model based upon one previously developed and tested with earth satellite temperature data will be applied to the PMIRR measurements to produce estimates of the small-scale zonal drag and three-dimensional wind fields in the Mars middle atmosphere. This model is based on the primitive equations, and can allow for time dependence (the time tendencies used may be based upon those computed in a Fast Fourier Mapping procedure). The small-scale zonal drag is estimated as the residual in the zonal momentum equation; the horizontal winds having first been estimated from the meridional momentum equation and the continuity equation. The scheme estimates the vertical motions from the thermodynamic equation, and thus needs estimates of the diabatic heating based upon the observed temperatures. The latter will be generated using a radiative model. It is hoped that the diagnostic scheme will be able to produce good estimates of the zonal gravity wave drag in the Mars middle atmosphere, estimates that can then be used in other diagnostic or assimilation efforts, as well as more theoretical studies.

Barnes, J. R.↗

Analyzing Martian winds and tracer concentrations using Mars Observer data

During the courses of a day, the Mars Observer spacecraft will acquire globally distributed profiles of the martian atmosphere. It is highly desirable that this data be assembled into synoptic weather maps (complete specifications of the atmospheric pressure, temperature, and winds at a given time), which can in turn be used as starting points in the study of many meteorological phenomena. Unfortunately, the special nature of the Mars Observer data presents several challenges above and beyond the usual difficult problem of data initialization. Mars Observer atmospheric data will consist almost exclusively of asynoptic vertical profiles of temperatures (or radiances) and pressures, whereas winds are generally in balance with horizontal gradients of these quantities (which will not be observed). It will therefore be necessary to resort to dynamical models to analyze the wind fields. As a rule, data assimilation into atmospheric models can result in the generation of spurious gravity waves, so special steps must be taken to suppress these. In addition, the asynoptic nature of the data will require a four-dimensional (space and time) data assimilation scheme. The problem is to find a full set of meteorological fields (winds and temperatures) such that, when marched forward in time in the model, they achieve a best fit (in the weighted least-squares sense) to the data. The proposed solution is to develop a model especially for the Mars Observer data assimilation problem. Gravity waves are filtered from the model by eliminating all divergence terms from the prognostic divergence equation. This leaves a diagnostic gradient wind relation between the rotational wind and the temperature field. The divergent wind is diagnosed as the wind required to maintain the gradient wind balance in the presence of the diabatic heating. The primitive equations of atmospheric dynamics (with three principal dependent variables) are thus reduced to a simpler system with a single prognostic equation for temperature - the variable that will be best observed. (This balance system was apparently first derived by Charney as a first-order Rossby number expansion of the equations of motion). Experience with a full primitive equation model of the martian atmosphere indicates that a further simplification is possible: at least for short-term integrations, the model can be linearized about the zonally symmetric basic state.

Houben, Howard C.↗

Model capabilities, 2-D

Two dimensional (2-D) atmospheric models provide results for altitude versus latitude as a function of time and are developed primarily for two reasons: to help understand atmospheric occurrences and to give assessments and/or make predictions of future changes in the atmosphere. Historically, the formulation of transport in 2-D models has been a difficult problem. Most current 2-D models have a transport that is either an Eulerian mean circulation with large stratospheric eddy diffusion or a residual (diabatic or Lagragian) mean circulation which typically is accompanied with small stratospheric eddy diffusion. Because of the assumption of zonal averaging, 2-D models are primarily useful in making predictions of atmospheric changes of time scales longer than a season. Although decadel atmospheric changes may be reasonably well represented with a 2-D model, the year to year changes which result from interannual transport differences, stratospheric warmings, semiannual oscillations, or quasi-biennial oscillations may not be well represented in the stratosphere and troposphere.

Jackman, Charles H.↗

Meso-beta scale numerical simulation studies of terrain-induced jet streak mass and momentum perturbations

An in-depth analysis of observed gravity waves and their relationship to precipitation bands over the Montana mesonetwork during the 11-12 July 1981 CCOPE case study indicated two episodes of coherent waves. While geostrophic adjustment, shearing instability, and terrain were all implicated separately or in combination as possible wave generation mechanisms, the lack of upper-air data within the wave genesis region made it difficult to define the genesis processes from observations alone. The first part of this paper, 3D Numerical Modeling Studies of Terrain-Induced Mass/Momentum Perturbations, employs a mesoscale numerical model to help diagnose the intricate early wave generation mechanisms during the first observed gravity wave episode. The meso-beta scale numerical model is used to study various simulations of the role of multiple geostrophic adjustment processes in focusing a region for gravity wave genesis. The second part of this paper, Linear Theory and Theoretical Modeling, investigates the response of non-resting rotating homogeneous and continuously stratified Boussinesq models of the terrestrial atmosphere to temporally impulsive and uniformly propagating three-dimensional localized zonal momentum sources representative of midlatitude jet streaks. The methods of linear perturbation theory applied to the potential vorticity (PV) and wave field equations are used to study the geostrophic adjustment dynamics. The total zonal and meridional wind perturbations are separated into geostrophic and ageostrophic components in order to define and follow the evolution of both the primary and secondary mesocirculations accompanying midlatitude jetogenesis forced by geostrophic adjustment processes. This problem is addressed to help fill the gap in understanding the dynamics and structure of mesoscale inertia-gravity waves forced by geostrophic adjustment processes in simple two-dimensional quiescent current systems and those produced by mesoscale numerical models simulating the orographic and diabatic perturbation of three-dimensional quasi-geostrophically balanced synoptic scale jet streaks associated with complex baroclinic severe storm producing environments.

Lin, Yuh-Lang↗

Meso-beta scale numerical simulation studies of terrain-induced jet streak mass/momentum perturbations

Mesoscale model simulations provide insight into the complex jet streak adjustments on 11-12 July 1981 that preceded the first of two significant gravity wave events to have been generated over the Rocky Mountains in Montana. Simulations employing a variety of terrain treatments indicate that prior to wave formation, geostrophic adjustment processes modified the structure of the mid-upper tropospheric jet streak by creating secondary jetlets to the southeast of the polar jet streak in proximity to the gravity wave generation region. This simulated restructuring of the mid-upper tropospheric jet streak is the result of a four stage process. During stage 1, the wind adjusts to the mass field as the jet streak exit region propagates into the inflection point between the upstream trough and downstream ridge in the height field. Stage 2 is initiated as the mass field is forced to adjust to the new ageostrophic wind field created during stage 1. Stage 3 is defined by a second geostrophic adjustment process occurring in a similar manner but to the south and east of the adjustment which occurs during stage 1. A low-level mesoscale jetlet is formed during stage 4 in response to the low-level pressure falls that are established during stage 3. The perturbation of this jetlet, caused by orographically-induced adiabatic and diabatic physical processes, is the likely mechanism responsible for the generation of the first and second episode of observed gravity waves. The dynamics responsible for this wave episode are discussed as differential surface sensible heating inducing an orographically-forced mountain-plains solenoid, resulting in the formation of additional mesoscale jetlets and internal gravity waves. Also discussed is how convective latent heating modifies the numerically simulated terrain-induced internal gravity waves, especially their amplitude and phase velocities, which provide better agreement with those wave characteristics observed in nature. Finally, the three-dimensional linear response of a zonally uniform barotropic flow in a vertically unbounded, continuously stratified, Boussinesq atmosphere which is perturbed from geostrophic equilibrium is investigated.

Lin, Yuh-Lang↗