Search NASA⌕ Search

SEARCH · Search NASA

Results for “Digitalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Real-Time High-Accuracy Digital Wireless Time, Frequency, and Phase Calibration for Coherent Distributed Antenna Arrays

his work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase coherence of spatially separated commercial off-the-shelf (COTS) software-defined radios (SDRs) without cables or external references such as the global navigation satellite system (GNSS). Building on previous work using high-accuracy spectrally-sparse time of arrival (ToA) waveforms and a multistep ToA refinement process, a high-accuracy two-way time transfer (TWTT)-based time–frequency coordination approach is demonstrated. Due to the two-way nature of the high-accuracy TWTT approach, the time and frequency estimates are Doppler and multipath tolerant, so long as the channel is reciprocal over the synchronization epoch. This technique is experimentally verified using COTS SDRs in a lab environment in static and dynamic scenarios and with significant multipath scatterers. Time, frequency, and phase stability were evaluated by beamforming over coaxial cables to an oscilloscope which achieved time and phase precisions of ~60– 70 ps , with median coherent gains above 99% using optimized coordination parameters, and a beamforming frequency root-mean-square error (RMSE) of 3.73 ppb in a dynamic scenario. Finally, experiments were conducted to compare the performance of this technique with previous works using an analog continuous-wave two-tone (CWTT) frequency reference technique in both static and dynamic settings.

Clock synchronization↗
DOE OSTI2025

Development of Emergency Vehicle Preemption Strategies on Smart Corridors in a Digital Twin Environment

Emergency Response Vehicles (ERVs), such as firetrucks, ambulances, etc. operate with the purpose of saving lives and mitigating property damage. As such, ERV travel-time reductions may result in significant benefits to the community. A common strategy to improve travel times is Emergency Vehicle Preemption (EVP). EVP seeks to reduce ERV delays by providing the right-of-way to ERVs as they approach an intersection. This study proposes a new Dynamic Preemption strategy that determines the need for preemption prior to the ERV reaching the vicinity of the intersection, utilizing real-time data streams. This paper evaluates the effectiveness of some existing and proposed preempt control strategies using a digital twin testbed consisting of a series of signalized intersections on an urban arterial in Georgia. The best EVP strategy maximizes the improvement in ERV travel time while minimizing the adverse effect of preemption on the traffic in conflicting directions. Therefore, this study evaluates both the positive impact of EVP on the ERV as well as the adverse impact on the cross-street traffic. The study found that the potential exists for significant improvements in ERV travel time with the proposed Dynamic Preemption strategy, with minimal impact to the conflicting traffic. For the simulation corridor there was a 20% reduction in the ERV travel times with the implementation of the Dynamic Preemption strategy, compared to traditional EVP practices.

Roy, Somdut [Georgia Institute of Technology]↗
DOE OSTI2024

Digital Analytics, Causal Knowledge Acquisition and Reasoning for Technical Language Processing

Complex engineering systems such as nuclear power plants (NPPs) generate and collect large amounts of equipment reliability (ER) data elements that contain information on the status of components, assets, and systems. Some of this information is textual in form and can be found in documents such as incident reports (IRs) and work orders (WOs). Analyses of textual data in current NPPs-using natural language processing (NLP) methods-have been expanded over the last decade, and it is only recently that the true potential of such analyses has emerged. So far, applications of NLP methods have mostly been limited to classification and prediction, the goal being to identify the nature of the textual element (e.g., safety or non-safety related). Here, we target a more complex problem: automatically extracting knowledge from a textual element in order to assist system engineers in conducting system health assessments. Knowledge extraction is a very broad concept, and its definition may vary depending on the application context. Our methods are a blend of both rule-based and machine learning (ML) algorithms. For our purposes, knowledge extraction means identifying the systems or assets mentioned in a given textual element, as well as the type of event described (e.g., component failure or maintenance activity). In addition, we want to capture details such as measured quantities and the temporal/cause-effect relations between events. In this tool, we also demonstrate how textual data elements are preprocessed in order to handle typos, acronyms, and abbreviations. One main feature of these methods is that they are not based solely on data, but are in fact model-based. In other words, they also rely on MBSE models that are designed to capture-from a functional point of view-the architecture of the systems/assets under consideration. The main purpose of such models is to digitally emulate system engineers' knowledge of system and asset architecture and to identify dependencies among systems, assets, and components. Provided these models, analyses of textual and numeric ER data can be performed by first identifying the OPM model elements to which the ER data elements are referring. The relationships between ER data elements are then identified by checking for any temporal or logical dependencies.

Mandelli, Diego [Idaho National Laboratory (INL), ↗
DOE OSTI2024

TwinMe4AD: WGAN-based Digital Twins for Anomaly Detection

SAND2024-08373O TwinMe4AD is a Python-based software tool designed for anomaly detection using digital twins that closely mimic real, wearable healthcare datasets. The tool is invaluable for scenarios where collecting data is either expensive or impractical, serving as a privacy-preserving solution. Sensitive information is protected by training deep learning models on synthetic data derived from real datasets. One of TwinMe4AD's key features is its anomaly detection capability, which is based on fourth-order moments of parameters. This versatile approach can be applied across a range of datasets, from univariate to multivariate, making it compatible with various types of data. It also generates synthetic twins using Wasserstein Generative Adversarial Networks (WGANs), allowing users to create a small cohort of a population similar to that of a village population. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Poorey, Kunal↗
DOE OSTI2024

Digital Twin for Chemical Science (DTCS) v0.01

Directly visualizing the trajectories of chemistry can unravel novel insights into the behavior of catalysts, gas phase reactions, photo-induced dynamics, and building blocks for quantum information processing. The ability of explicitly identifying, tracking, and tagging the exchange of matter, hence the annihilation and creation of new chemical species, can be best realized through a close coupling of theory and experiment. While the synchrotron-based characterization facilities propelled rapidly in its hardware, providing higher brightness, better resolution, and more precision, the software infrastructure is lagging. We developed DTCS (Digital Twin for Chemical Science) v.01, a central platform that faithfully mimics advanced instrumentations in Scientific User Facilities, by solving a variety of technical challenges in data acquisition, analysis, and model-driven interpretation. Rooted in physics and accelerated by AI, we validated this concept by direct comparison with precise experimental X-ray Photoelectron Spectroscopy (XPS) observations using a ubiquitous metal-water interfacial scenario, i.e., Ag/H2O as our main narrative. The DTCS v.01 input mirrors how the bench chemists work, with the output directly linked to the end station computer, thereby providing a user-friendly, knowledge-driven, and accessible user experience with mechanistic insights standardized in a way that are ready to be published, versioned, and transferred flexibly.

Qian, Jin↗
DOE OSTI2025

Artificial Intelligence–Enabled Digital Twin for U.S. Cities

Over 50 participants—including national laboratory researchers, academic scholars, industry representatives, and stakeholders from the City of Chicago—convened in person and online to assess the readiness and potential of an Artificial Intelligence–Enabled Digital Twin (AIDT) for urban systems, with the Greater Chicago area serving as the benchmark location. The workshop underscored that the Chicago Urban Integrated Field Laboratory provides an unparalleled testbed for developing and validating urban DTs—combining dense, multiscale observations, advanced physics-based and AI modeling capabilities, and strong stakeholder and industry engagement. Discussions highlighted available datasets, AI architectures for high resolution, multipurpose urban DTs, key applications, and near- and long-term priorities for scaling this framework within Chicago and to other U.S. and global cities.

AIDT↗
DOE OSTI2025

Unified differentiable digital twin for the IOTA/FAST facility

As the design complexity of modern accelerators grows, there is more interest in using advanced simulations that have fast execution time or produce insights about accelerator state. One notable example of additional information are gradients of physical observables with respect to design parameters produced by differentiable simulations. The IOTA/FAST facility has recently begun a program to implement and experimentally validate a unified start-to-end differentiable digital twin to serve as a virtual accelerator test stand, allowing for rapid prototyping of new software and experiments with minimal beam time costs. In this contribution we will discuss our plans and progress. Specifically, we will cover the selection and benchmarking of both physics and ML codes, the development of generic interfaces between device models and surrogate or physics-based sections, and the export of the parameters through either a deterministic event loop or a fully asynchronous EPICS soft input/output controller. We will also discuss challenges in model calibration and uncertainty quantification, as well as future plans to support larger proton accelerators like PIPII and Booster.

Kuklev, Nikita [Fermilab]↗
DOE OSTI2024

Radiation-Hard Smart-Pixel Detector ASIC ReadOut with Digital AI in 28nm

Detectors at future high energy colliders will face enormous technical challenges. Disentangling the unprecedented numbers of particles expected in each event will require highly granular silicon pixel detectors with billions of readout channels. With event rates as high as 40 MHz, these detectors will generate petabytes of data per second. To enable discovery within strict bandwidth and latency constraints, future trackers must be capable of fast, power efficient, and radiation hard data-reduction at the source. This effort is pursuing the co-design development of high-performance readout smart pixel ASICs for a future Phase III High Luminosity upgrade of the Large Hadron Collider. A 1.6mm2 ASIC prototype was designed by Fermilab in CMOS 28 nm bulk process and submitted for manufacturing in February 2024. It leverages the analog front-end pixel design of a previous prototype fabricated and tested in 2023, which achieved a simulated detection level of ~400e- with 30fF input capacitance. The ROIC consists of two matrices of 16×16 smart pixels, each 25×25 μm2 in size. Each smart pixel contains a charge-sensitive preamplifier with leakage current compensation and three auto-zero comparators for a 2-bit flash-type ADC. There is digital space for the integration of our fully combinatorial AI that performs momentum classification at the bunch crossing rate. The total power consumption is ∼6μW per pixel, which corresponds to ~1mW/cm2. The ASIC incorporates programmable front-end charge injection circuitry to generate pixel cluster charges during characterization. The cluster profile will be generated to duplicate hit characteristics of various momentum (pT). We will present early results from chip testing.

Parpillon, Benjamin↗
DOE OSTI2024

Enabling Digital Image Correlation for Deployment in the Hot Fuels Examination Facility

Digital image correlation (DIC) is a non-contact image-based technique for displacement and strain measurement. It is also a full-field method that can provide excellent spatial resolution. DIC has been widely used for measurements in many styles of mechanical tests and is desirable in part because of this flexibility to measure nearly any material across a range of time and length scales. Its ability to measure localized strain for tests and in environments not accessible to other strain measurement techniques makes it an ideal option for several mechanical test cases that exist in hot cell facilities such as the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). However, DIC has not been demonstrated at HFEF, and several barriers to implementation in the hot cell environment exist. This report outlines the possible paths for deploying DIC at HFEF, weighing the technical advantages and risks with each path. It also discusses the steps which must be taken to add this capability to the suite of post-irradiation examination (PIE) techniques available at HFEF. Finally, it concludes with recommendations for the best method to perform DIC at the facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Digitizing Oil & Gas Well Regulatory Records from Illinois with the CATALOG OGRRE Tool

This effort demonstrates the functionality of the CATALOG Oil and Gas Regulatory Record digitizEr—OGRRE. OGRRE is being developed for automated mapping of fields on scanned oil and gas paper records to a uniform tabular format using advances in machine learning and optical character recognition.

Shay, Jacob [NETL Site Support Contractor, Nationa↗
DOE OSTI2025

Zero-Power Wireless Infrared Digitizing Sensors for Large Scale Energy-Smart Farm

This project, funded by ARPA-E and led by Northeastern University, developed zeropower infrared digitizing sensors to optimize irrigation and enhance crop yields. Traditional water stress detection methods are costly and require frequent maintenance, limiting their effectiveness. Our research identified shortwave infrared (SWIR) transmittance as the most reliable indicator of plant water stress and developed plasmonically enhanced micromechanical photoswitches (PMPs) that operate with minimal power. The sensors offer low-cost, large-scale deployment, auto-calibration across different crops, and a 10-year battery life, significantly reducing maintenance costs. The system achieved 4x greater accuracy than conventional soil moisture sensors while ensuring economic feasibility. By enabling precision irrigation, this technology conserves water, enhances crop productivity, and lowers operational costs, making it a scalable solution for sustainable agriculture and global food security.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Prototype Development for MBSE-Driven Digital Environment at Fermilab

Complex projects like Fermilab s accelerators and detectors involve thousands of interdependent components and requirements, making traditional documentation hard to keep consistent and often causing rework. Model-Based Systems Engineering (MBSE) tackles this by representing the system as a digital, queryable model. While widely used in aerospace and safety-critical industries, MBSE adoption has been limited elsewhere due to steep learning curves and high costs. This project investigates how a web-first, low-code MBSE stack can reduce those barriers and offer an accessible, unified source of truth for engineers and physicists.

Valle, Diego Pedro (ORCID:0009000865900663)↗
DOE OSTI2025

Digitize O&M Procedure Guidelines for Illu Workflows (CRADA Final Report)

NREL will provide technical assistance to help digitize best practice operations and maintenance (“O&M”) procedure guidelines utilizing the Illu platform for specific distributed solar-storage system configurations. NREL shall test Illu workflows in a real inspection environment for clarity of instruction and ease of documentation.

14 SOLAR ENERGY↗
DOE OSTI2025

Baseband Digital Network Analyzer Upgrade for LLRF Controllers

Digital Network Analyzers (DNA) have been implemented in many Low-Level Radio Frequency (LLRF) systems, notably NSLS-II and CERN, to help tune feedback loops. DNA characterizes feedback loops by measuring the frequency-dependent magnitude and phase transfer functions. It enables the measurement of open loop gains, gain/phase margins, and loop delays to help fine-tune feedback loops. An FPGA-based DNA has been developed and integrated into the current Relativistic Heavy Ion Collider (RHIC) LLRF infrastructure. Its performance has been tested with an implementation of one-turn delay feedback (OTFB) on the bench to maximize gain and stability. The DNA has been used to characterize a RHIC 28 MHz cavity in a RHIC Accelerator Physics Experiment (APEX) to test transient beam loading compensation strategies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials: Part II Resveratrol Exemplar

This SAND report summarizes work supported by an Engineering Sciences Research Foundation (ESRF) Lab Directed Research and Development (LDRD) project entitled “Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials.” This SAND report is written in two parts with Part 1 discusses recrystallization of our explosive exemplar and Part 2 summarizing our work with recrystallization of resveratrol. We have studied resveratrol recrystallization with a multiscale approach combining experiments, modeling and simulation. At the single crystal scale, microscopy experiments illuminate crystal time-dependent growth rates using advanced image analysis. Bench scale experiments were carried out to look at growth of multiple particles in a small reactor creating thousands of particles and analyzing the results with microscopy and μCT. For the modeling we combine kinetic Monte Carlo (kMC) models with subscale information from density functional theory (DFT) or molecular dynamics. This work is discussed in Part 1 and can also be found in a paper from the project discussing a coarse-grained kMC model specifically developed for resveratrol. For well-mixed systems, we have population balance equations (PBE) linked with species mass conservation forming a set of ordinary differential equations that can be solved quickly. For more complicated geometries, such as the vat crystallization used throughout the complex, a coupled computational fluid dynamic (CFD)/PBE method was developed to account for gradients in temperature and concentration and differences in crystallization rates throughout the domain. These simulations are more complex and require high performance computing. We present results for two cases: 5% seed fast cool with parameters fit to the well-mixed case and 5% seed slow cool using the same parameters. We show reasonable agreement with experiments though are particles are significantly larger than the experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In-Cell Deployment and First Use of Digital Image Correlation for In-Situ Strain Analysis of Irradiated Nuclear Fuel Rods During LOCA Transient

Digital image correlation (DIC) is a noncontact, optical method increasingly used across industries and research environments for acquiring multidimensional strain data. At Oak Ridge National Laboratory’s (ORNL’s) Severe Accident Test Station (SATS), DIC has been extensively applied to study the thermomechanical response of nuclear fuel claddings, yielding fundamental insights into material behavior. However, these efforts have focused exclusively on unirradiated materials and relied on the SATS out-of-cell infrastructure. Efforts over the past two years have been made to extend these capabilities to ORNL’s Irradiated Fuels Examination Laboratory SATS system within the hot-cells to enable testing of irradiated fuel cladding materials. Integrating DIC into the hot-cell SATS infrastructure presents unique challenges, including enabling remote operation of optical equipment and adapting auxiliary hot-cell systems for DIC implementation. This report discusses design, stand-up testing, and application of DIC to an irradiated nuclear fuel cladding segment. A DIC testing rig was successfully built and validated out-of-cell through extensive surrogate tests and calibrations. The rig and specialized DIC furnace were installed in the hot-cell, and a DIC test was successfully conducted. Results from that test correspond to expectations for Zr-based alloys and showed similar uncertainties compared to out-of-cell tests.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗