Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation Lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase Pattern Formation in Grain Boundaries

Here, in this Letter, we derive conditions that predict the existence of two-phase periodic-pattern grain boundary structures that are stable against coarsening. While previous research has established that elastic effects can lead to phase pattern formation on crystal surfaces, the possibility of stable grain boundary structures composed of alternating grain boundary phases has not been previously analyzed. Our theory identifies the specific combination of grain boundary and materials properties that enable the emergence of patterned grain boundary states and shows that the dislocation content of grain boundary phase junctions, absent in surface phenomena, weakens the stability of the patterned structures. The predictions of the theory are tested using a model copper grain boundary that exhibits multiple phases and two-phase pattern formation. We discuss how, similarly to surfaces, elastic effects associated with grain boundary phase junctions have profound implications for how grain boundary phases transform.

36 MATERIALS SCIENCE↗

Statistical description of the motion of dislocation kinks in a random field of impurities adsorbed by a dislocation

A model has been proposed for describing the influence of impurities adsorbed by dislocation cores on the mobility of dislocation kinks in materials with a high crystalline relief (Peierls barriers). The delay time spectrum of kinks at statistical fluctuations of the impurity density has been calculated for a sufficiently high energy of interaction between impurities and dislocations when the migration potential is not reduced to a random Gaussian potential. It has been shown that fluctuations in the impurity distribution substantially change the character of the migration of dislocation kinks due to the slow decrease in the probability of long delay times. The dependences of the position of the boundary of the dynamic phase transition to a sublinear drift of kinks x {proportional_to} t{sup {delta}} ({delta} {sigma} 1) and the characteristics of the anomalous mobility on the physical parameters (stress, impurity concentration, experimental temperature, etc.) have been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stress and temperature dependence of screw dislocation mobility in {alpha}-Fe by molecular dynamics

The low-temperature plastic yield of {alpha}-Fe single crystals is known to display a strong temperature dependence and to be controlled by the thermally activated motion of screw dislocations. In this paper, we present molecular dynamics simulations of (1/2)<111>{l_brace}112{r_brace} screw dislocation motion as a function of temperature and stress in order to extract mobility relations that describe the general dynamic behavior of screw dislocations in pure {alpha}-Fe. We find two dynamic regimes in the stress-velocity space governed by different mechanisms of motion. Consistent with experimental evidence, at low stresses and temperatures, the dislocations move by thermally activated nucleation and propagation of kink pairs. Then, at a critical stress, a temperature-dependent transition to a viscous linear regime is observed. Critical output from the simulations, such as threshold stresses and the stress dependence of the kink activation energy, are compared to experimental data and other atomistic works with generally very good agreement. Contrary to some experimental interpretations, we find that glide on {l_brace}112{r_brace} planes is only apparent, as slip always occurs by elementary kink-pair nucleation/propagation events on {l_brace}110{r_brace} planes. Additionally, a dislocation core transformation from compact to dissociated has been identified above room temperature, although its impact on the general mobility is seen to be limited. This and other observations expose the limitations of inferring or presuming dynamic behavior on the basis of only static calculations. We discuss the relevance and applicability of our results and provide a closed-form functional mobility law suitable for mesoscale computational techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural Evolution of Tantalum During Deformation and Subsequent Annealing

Microstructure-aware models are necessary to predict the behavior of material based on process knowledge or to extrapolate mechanical properties of materials to environmental conditions which are not easily reproduced in the laboratory, e.g., nuclear reactor environments. Elemental Ta provides a relatively simple BCC system in which to develop a microstructural understanding of deformation processes which can then be applied to more complicated BCC alloys. In situ neutron diffraction during compressive deformation and subsequent heat treatment have been used to monitor the evolution of microstructural features in Ta throughout simulated processing steps. Crystallographic texture and dislocation density are determined as a function of first plastic strain, then temperature. Lattice strains are determined and attributed to stresses at macroscopic, grain and dislocation length scales. The increase of the dislocation density through deformation and subsequent recovery during heat treatment is monitored through the changing diffraction line profile. Also, randomization of the texture is used as a signature of recrystallization. The recovery of dislocations through annihilation is not observed to depend on the initial dislocation density in the range studied here. In contrast, recrystallization is observed to depend strongly on the initially dislocation density.

36 MATERIALS SCIENCE↗

Transient solute drag and strain aging of dislocations

The transient drag force exerted by mobile solutes on a moving dislocation is computed using continuum theory. These mobile solutes form so-called Cottrell atmospheres around dislocations during static and dynamic strain aging. We evaluate the evolution of the drag force exerted by the atmosphere under two velocity time-histories: impulsive acceleration to a chosen velocity and a constant acceleration rate. A particular focus is on the conditions under which the stationary limit assumed by theories of dynamic strain aging is obeyed. According to our results, two conditions—one on the dislocation velocity and one on the acceleration rate—must be satisfied for the stationary limit to hold. Using the Orowan relation and a line tension model, we obtain estimates for the temperature, stress, strain rate, and dislocation density regimes where the stationary limit is valid, and compare these results with experiments for a few material systems.

36 MATERIALS SCIENCE↗

Hopfions, heliknotons, skyrmions, torons and both abelian and nonabelian vortices in chiral liquid crystals

Widely known for their uses in displays and electro-optics, liquid crystals are more than just technological marvels. They vividly reveal the topology and structure of various solitonic and singular field configurations, often markedly resembling the ones arising in many field theories and in the areas ranging from particle physics to optics, hard condensed matter and cosmology. In this review, we focus on chiral nematic liquid crystals to show how these experimentally highly accessible systems provide valuable insights into the structure and behavior of fractional, full, and multi-integer two-dimensional skyrmions, dislocations and both abelian and non-abelian defect lines, as well as various three-dimensionally localized, often knotted structures that include hopfions, heliknotons, torons and twistions. Finally, we provide comparisons of some of these field configurations with their topological counterparts in chiral magnets, discussing close analogies between these two condensed matter systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reciprocal-Space Maps of X-Ray Diffraction Intensity Distribution and Their Relation to the Dislocation Structure of Epitaxial Layers

X-ray diffraction (XRD) in asymmetric Bragg geometry was measured and XRD intensity distribution maps in the reciprocal space were constructed for GaN epitaxial layers with various degrees of structural perfection grown on c-sapphire substrates. It is established that equal-intensity lines (isolines) related to a regular system of perpendicular rectilinear threading dislocations are extended in a direction parallel to the surface. For a more chaotic distribution of dislocations with a large fraction of horizontal fragments, these isolines are rotated toward a direction perpendicular to the reciprocal lattice vector, although they still not attain a limiting position characteristic of the ideal mosaic crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Dose Ion Irradiation Testing on Improved HT-9 Alloys

HT9 alloys having various nitrogen contents were deformed up to 50% engineering strain by plane strain compression. Dislocation density and characteristics were determined after neutron diffraction using line profile analysis. These samples having low and high nitrogen contents were irradiated at 300 °C up to 23 peak dpa. In this study, effect of plane strain deformation on the radiation response of low and high N HT9 alloys has been investigated using both transmission electron microscopy and nanoindentation. It has been found that compression results in a considerable increase in both dislocation density and edge type dislocations. Both TEM and nano-indentation studies indicate that plane strain deformation results in improved radiation resistance in high N HT9 alloys. It has been also found that further deformation beyond 10% compression does not improve the radiation resistance further. On the other hand, deformation does not have a clear effect on the radiation resistance in the case of low N HT9 alloys. Together with that, ion irradiations at 300 °C results in ~2 times higher hardening in low N alloys compared to high N alloys.

36 MATERIALS SCIENCE↗

In situ high energy X-ray diffraction measurement of strain and dislocation density ahead of crack tips grown in hydrogen

The deformation fields near fatigue crack tips grown in hydrogen and in air were measured using high-energy x-ray diffraction. A larger magnitude of elastic strain was observed in the hydrogen case compared to the air case. The magnitude of elastic strain was quantified through an effective crack tip stress intensity factor. The dislocation profile ahead of the crack was probed via x-ray line broadening and electron back-scatter diffraction was used to assess the crack path (intergranular vs. transgranular). Ahead of the crack tip grown in hydrogen, an order of magnitude lower dislocation density, compared to a baseline density far from the crack, was observed. This decrease in dislocation density was not observed in the air case. These differences are discussed in terms of two leading hydrogen embrittlement mechanisms, Hydrogen Enhanced Localized Plasticity (HELP) and Hydrogen Enhanced Decohesion (HEDE). We have observed a decrease in transgranular cohesion (transgranular HEDE), as well as an increase in intergranular fracture. The measurements of dislocation activity support a model of a decrease in intergranular cohesion (intergranular HEDE) which is likely facilitated by the HELP mechanism. Here, this suggests that the increase in fatigue crack growth rate is due to a sum of the two effects of hydrogen, in which the crack grows faster in the transgranular fracture mode and faster due to an increase in a new mode of intergranular fracture. Published by Elsevier Ltd on behalf of Acta Materialia Inc.

36 MATERIALS SCIENCE↗

Structural representation of additively manufactured 316L austenitic stainless steel

Three 316L stainless steel materials are studied and reported upon; wrought, as-built additively manufactured (AM), and heat-treated AM material. The AM material was produced from the laser engineered net shaping (LENS) process. Macroscopic uniaxial compression stress-strain curves were obtained for all three materials. The curves were similar for the wrought and heat-treated AM materials but the as-built AM material demonstrated approximately 1.7 times greater flow stress at any given level of strain than the other two materials. Electron-backscatter diffraction analysis of the materials also showed that the microstructures of the three materials differed; with complex grain morphology for the as-built AM material. The mean grain size of each of the three materials also differed. Furthermore, the initial dislocation density was also measured with neutron diffraction and line-profile analysis for both wrought and as-built AM materials with the density in the AM material approximately 2.5 times greater.

36 MATERIALS SCIENCE↗

X-ray diffraction line profile analysis of deformation microstructure in boron modified Ti-6Al-4V alloy

X-ray diffraction line profile analysis (XRDLPA) techniques have been applied to investigate the deformed microstructure of a recently developed boron modified two-phase titanium alloy Ti-6Al-4V. The alloy was hot compressed at 750 deg. C up to 50% height reduction at two different strain rates (10{sup -3} S{sup -1} and 1 S{sup -1}). Microstructural parameters like average domain size, average microstrain within the domain and dislocation density of the two phases were determined using X-ray diffraction line profile analysis. The results indicate an increase in the microstrain and dislocation density for the {alpha}-phase and decrease for the {beta}-phase in the case of boron modified alloys as compared to the normal material. Microstructural modifications viz. the grain refinement and the presence of hard, brittle TiB particles in the case of boron modified alloy are held responsible for the observed difference in the dislocation density. - Research Highlights: {yields} Microstructural examination of hot compressed Ti64 with and without boron addition by XRDLPA. {yields} Smaller average domain size in alpha-phase compared to the corresponding alpha-phase in all cases. {yields} Higher microstrain and dislocation density for {alpha} phase and lower for {beta} phase in case of Ti64+B. {yields} Decrease in domain size while increase in micro-strain and dislocation density with strain rate. {yields} Strain accumulation around TiB particles responsible for high dislocation density in {alpha} phase.

36 MATERIALS SCIENCE↗

Homoepitaxy of Crystalline Rubrene Thin Films

The smooth surface of crystalline rubrene films formed through an abrupt heating process provides a valuable platform to study organic homoepitaxy. By varying growth rate and substrate temperature, we are able to manipulate the onset of a transition from layer-by-layer to island growth modes, while the crystalline thin films maintain a remarkably smooth surface (less than 2.3 nm root-mean-square roughness) even with thick (80 nm) adlayers. We also uncover evidence of point and line defect formation in these films, indicating that homoepitaxy under our conditions is not at equilibrium or strain-free. Point defects that are resolved as screw dislocations can be eliminated under closer-to-equilibrium conditions, whereas we are not able to eliminate the formation of line defects within our experimental constraints at adlayer thicknesses above ~25 nm. We are, however, able to eliminate these line defects by growing on a bulk single crystal of rubrene, indicating that the line defects are a result of strain built into the thin film template. We utilize electron backscatter diffraction, which is a first for organics, to investigate the origin of these line defects and find that they preferentially occur parallel to the (002) plane, which is in agreement with expectations based on calculated surface energies of various rubrene crystal facets. By combining the benefits of crystallinity, low surface roughness, and thickness-tunability, this system provides an important study of attributes valuable to high-performance organic electronic devices.

36 MATERIALS SCIENCE↗

Dislocation content of grain boundary phase junctions and its relation to grain boundary excess properties

In this work, we analyze the dislocation content of grain boundary (GB) phase junctions, i.e., line defects separating two different GB phases coexisting on the same GB plane. While regular GB disconnections have been characterized for a variety of interfaces, GB phase junctions formed by GBs with different structures and different numbers of excess atoms have not been previously studied. We apply a general Burgers circuit analysis to calculate the Burgers vectors b of junctions in two Σ5 Cu boundaries previously simulated with molecular dynamics. The Burgers vectors of these junctions cannot be described by the displacement shift complete (DSC) lattice alone. We show that, in general, the normal component of b is not equal to the difference in the GB excess volumes but contains another contribution from the numbers of GB atoms per unit area ΔN* required to transform one GB phase into another. In the boundaries studied, the latter component dominates and even changes the sign of b. We derive expressions for the normal and tangential components of b in terms of the DSC lattice vectors and the non-DSC part due to ΔN* and additional GB excess properties, including excess volume and shears. These expressions provide a connection between GB phase transformations driven by the GB free energy difference and the motion of GB junctions under applied normal and shear stresses. The proposed analysis quantifies b and therefore makes it possible to calculate the elastic part of the energy of these defects, evaluate their contribution to the nucleation barrier during GB phase transformations, and treat elastic interactions with other defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Displacement Fields and Self-Energies of Circular and Polygonal Dislocation Loops in Homogeneous and Layered Anisotropic Solids

There are large classes of materials problems that involve the solutions of stress, displacement, and strain energy of dislocation loops in elastically anisotropic solids, including increasingly detailed investigations of the generation and evolution of irradiation induced defect clusters ranging in sizes from the micro- to meso-scopic length scales. Based on a two-dimensional Fourier transform and Stroh formalism that are ideal for homogeneous and layered anisotropic solids, we have developed robust and computationally efficient methods to calculate the displacement fields for circular and polygonal dislocation loops. Using the homogeneous nature of the Green tensor of order -1, we have shown that the displacement and stress fields of dislocation loops can be obtained by numerical quadrature of a line integral. In addition, it is shown that the sextuple integrals associated with the strain energy of loops can be represented by the product of a pre-factor containing elastic anisotropy effects and a universal term that is singular and equal to that for elastic isotropic case. Furthermore, we have found that the self-energy pre-factor of prismatic loops is identical to the effective modulus of normal contact, and the pre-factor of shear loops differs from the effective indentation modulus in shear by only a few percent. These results provide a convenient method for examining dislocation reaction energetic and efficient procedures for numerical computation of local displacements and stresses of dislocation loops, both of which play integral roles in quantitative defect analyses within combined experimental–theoretical investigations.

36 MATERIALS SCIENCE↗

Measurement of probability distributions for internal stresses in dislocated crystals

Here, we analyse residual stress distributions obtained from various crystal systems using high resolution electron backscatter diffraction (EBSD) measurements. Histograms showing stress probability distributions exhibit tails extending to very high stress levels. We demonstrate that these extreme stress values are consistent with the functional form that should be expected for dislocated crystals. Analysis initially developed by Groma and co-workers for X-ray line profile analysis and based on the so-called “restricted second moment of the probability distribution” can be used to estimate the total dislocation density. The generality of the results are illustrated by application to three quite different systems, namely, face centred cubic Cu deformed in uniaxial tension, a body centred cubic steel deformed to larger strain by cold rolling, and hexagonal InAlN layers grown on misfitting sapphire and silicon carbide substrates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Situ Synchrotron X-ray Study of the Mechanical Properties of Pure Mg Produced by Powder Metallurgy

In this study, in situ synchrotron X-ray experiments with wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) detectors were performed on two pure magnesium materials produced by powder metallurgy. According to SAXS analysis, each of the two materials has a porosity of less than 0.5%. Line broadening analysis was performed on diffraction patterns collected by WAXS to analyze the dislocation evolution during material deformation. In both materials, $<$a$>$-type dislocation activities dominate the tensile deformation. The influence of grain size and texture on the different tensile behaviors of these two materials is also discussed.

line profile analysis (LPA)↗