Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Study of the interplay between lower-order and higher-order energetic strain-gradient effects in polycrystal plasticity

in this report strain-gradient (SG) plasticity refers to a class of non-local theories in which gradients of plastic slip determine the storage of geometrically necessary dislocations, introducing a length-scale dependence in the mechanical behavior of crystalline materials, which is otherwise lacking in local theories. In this work, we incorporate lower-order (LO) and higher-order energetic (HOE) strain-gradient effects into a crystal plasticity fast Fourier transform (FFT)-based formulation to investigate the interplay of the length scale that each strain-gradient term introduces at the microscale, and the mechanical properties that result at the macroscale. For an applicable range of length scales, we consider two systems: a 1-D two-phase face centered cubic (FCC) laminate and a 3-D FCC polycrystal, and two uniaxial deformation modes: monotonic tension and cyclic tension–compression. We show that increases in the individual LO and HOE length scales increase the hardening rate and strength of the material, respectively. When combined, the strong LO hardening is less pronounced than the effect alone due to the lowering of the gradients due to the HOE microstress. We demonstrate that the LO and HOE hardening manifest as “isotropic” (yield surface expansion) and “kinematic” (yield surface shift) effects, respectively, consistent with their theoretical origins. We show that in cyclic loading, the Bauschinger effect emerges in both local and non-local calculations and link its origins and severity to the behavior in the strain field, slip-system rates, and the HOE microforce.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced mobility of dislocation network nodes and its effect on dislocation multiplication and strain hardening

Understanding plastic deformation of crystals in terms of the fundamental physics of dislocations has remained a grand challenge in materials science for decades. To overcome this, the Discrete Dislocation Dynamics (DDD) method has been developed, but its lack of atomistic resolution leaves open the possibility that certain key mechanisms may be overlooked. Here, by comparing large-scale Molecular Dynamics (MD) with DDD simulations performed under identical conditions we uncover significant discrepancies in the predicted strength and microstructure evolution in BCC crystals under high-strain rate conditions. These are traced to unexpected behaviors of dislocation network nodes forming at dislocation intersections, that can move in ways not previously anticipated as revealed by MD. Once these newfound freedoms of nodal motion are incorporated, DDD simulations begin to closely match plastic evolution observed in MD. This additional mechanism of motion whereby non-screw dislocations can change their glide plane profoundly affects fundamental processes of dislocation multiplication, recovery and storage that define strength of metals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Creep and failure at metal-oxide interfaces

Small-scale bicrystal creep experiments were performed on contacts formed via in situ high-temperature diffusion bonding of metal-oxide interfaces including Ag-ZrO 2 , Pd-ZrO 2 , Pt-ZrO 2 , and Ag-high entropy oxide. This work characterizes deformation and failure at metal-oxide interfaces during mechanical loading. Interfacial sliding can be activated easily, while tensile interfacial creep was not observed at any condition of stress or temperature measured. Plastic strain, instead, localizes within the metal under tensile loading. A variety of mechanisms for plastic strain occur in the metal including lattice dislocation-mediated plasticity, twinning, low-angle grain boundary formation, and low-angle grain boundary creep. Surface and low-angle grain boundary diffusion occur under conditions where no metal-oxide tensile creep is observed, highlighting the significant differences in their interfacial mechanical response. High-temperature interfacial failure occurs when the mean curvature at the contact neck is approximately zero and the applied stresses comparable to brittle fracture stresses. The brittle fracture stresses were measured to be σ ƒ = 180 ± 90 MPa at the Ag-ZrO 2 interface at 225 °C, σ ƒ = 460 ± 160 MPa at the Pd-ZrO 2 interface at 680 °C, and σ ƒ = 640 ± 440 MPa at the Pt-ZrO 2 interface at 1010 °C.

Creep↗
DOE OSTI2023

Prediction of dislocation - grain boundary interactions in FCC aluminum bicrystals using a modified continuum criterion and machine learning methods

Mechanical properties of metals such as strength and toughness are strongly correlated to complex interactions between various defects in the crystalline structure. While elementary interactions between these defects have been investigated using recent micro- and nano-characterization techniques, understanding of the detailed interaction mechanisms has hardly been obtained. To understand defect-driven plasticity at various time and length scales, it is necessary to formulate a general guideline to predict both the interaction type (transmission or reflection) and the dislocation's subsequent slip system after the interaction. Many criteria based on the geometric alignment of the defects have been developed to predict this phenomenon, but these have yet to be found to be accurate when applied to general data sets of grain boundaries (GBs). With this motivation, we conduct a systematic study using molecular dynamics (MD) models of bicrystals to analyze defect interaction process between a prismatic dislocation loop and eleven different grain boundaries of the following character: three tilt, three twist, and five mixed. Based on the MD observations, two new prediction methods are developed: the first is a new data-driven parametric score function based on the classical geometric criteria, and the second is by applying Gaussian process machine learning methods to find the probability distribution of a hidden function. In conclusion, the proposed data-driven prediction methods could pave a new way to predict the unit interaction of dislocations with various GBs, which could show much higher accuracy compared to pre-existing geometric criteria.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Use of friction stir processing to synthesize nanocrystalline, grain boundary segregating Fe-Ti alloys

Grain boundary segregating alloys, a class of alloys designed such that nanocrystalline grain sizes are thermodynamically stabilized by the presence of high segregation energy solutes at the grain boundaries, are typically produced through geometrically limited processing techniques such as equal channel angular extrusion or thin film sputtering. Here, this study explores the use of friction stir processing (FSP) as a novel means of studying and producing these alloys using a test system of Fe-6at%Ti. Spot FSPs with a range of processing parameter sets were produced on bulk, coarse grained bars of material and optimal parameters were identified. Microscopy identified a range of processed materials which achieved nanocrystalline grains on the order of 100 nm, delineating a critical window of processing parameters which limit heat input while inducing sufficient plastic deformation for grain refinement. The finest grained nanocrystalline Fe-Ti achieved a hardness of 7.68 GPa, a significant increase in hardness over pure Fe with a similar microstructure due to increased dislocation density from FSP as well as several strengthening mechanisms produced through the presence and segregation of Ti. These results demonstrated the feasibility of using FSP to produce nanocrystalline grain boundary segregating alloys.

Fe alloys↗
DOE OSTI2026

Radiation damage in tungsten under high-energy He-ion irradiation

Tungsten (W) is a primary candidate for plasma-facing components (PFCs) in fusion reactors and hybrid fission-fusion reactors. However, W suffers from severe microstructural damage under Helium (He) ion irradiation in operation conditions. Key irradiation parameters, including incident ion energy, fluence, and irradiation temperature, are known to determine the formation of He bubbles and dislocation loops, which ultimately lead to the degradation of mechanical properties, such as radiation hardening and ductile-to-brittle transition temperature (DBTT) shifts. Various strategies, for instance, interface engineering and alloying, have been developed to enhance He irradiation tolerance in W to address these challenges. Studies in the recent two decades have enhanced the understanding of the underlying mechanisms that drive defect evolution and mechanical performance degradation, thereby offering more insights into the design of more resilient W-based materials for extreme environments.

Liu, Yinghang [Purdue University]↗
DOE OSTI2023

Dislocation line tension model to improve understanding of the effects of hydrogen on the deformation of structural materials

Decarbonization efforts highlight hydrogen as an attractive alternative to fossil fuels, but its tendency to embrittle structural metals demands careful consideration when designing hydrogen infrastructure. Moreover, the mechanisms by which hydrogen degrades these materials are still being elucidated. The current work develops new computational tools to quantify the different contributions of hydrogen to the energy barrier of cross-slip, a key deformation mechanism. Novel features are implemented to a line tension model, which include the use of non-singular dislocation interactions, character-dependent dislocation energies and simulations of the constriction configurations. A new molecular dynamics technique is developed to calculate the interaction energy between the partials of a dissociated dislocation via fixing the centers of mass of the regions below and above the Shockley partials and performing time-averaged calculations. Hydrogen is found to impact the stacking fault width of dislocations in different ways depending on their characters: it decreases for dislocations with a character θ > 30°, remains unchanged for θ = 30° and increases for θ < 30°. The latter regime is a newly identified mechanism by which hydrogen inhibits cross-slip. Moreover, formation of nano-hydrides is predicted to occur around screw dislocations for high hydrogen concentrations, a phenomenon previously identified only in dislocations with an edge component. If nano-hydrides develop, their influence extending the equilibrium stacking fault width and increasing both the constriction and cross-slip energy barriers dominate over all other hydrogen contributions. The theory and tools developed will pave the way towards a comprehensive understanding of hydrogen-dislocation interactions in structural metals.

08 HYDROGEN↗
DOE OSTI2024

Strength-ductility synergy through microstructural and compositional heterogeneity in directed energy deposition additive manufacturing of face-centered cubic materials

Directed energy deposition (DED) is an additive manufacturing (AM) process based on welding technology and offers the advantages of large build volume, high deposition rate, and ability to fabricate multi-material parts. Epitaxial continuous columnar grain growth is a characteristic microstructural feature of DED processed alloys. In this study, a bamboo-like microstructure (periodic alternation of equiaxed and columnar structure) was produced by adopting an intermittent deposition strategy in 316L stainless steel and Inconel 625. The formation of a bamboo-like alternating microstructure was confirmed through electron backscattered diffraction (EBSD) analysis. Hardness mapping showed that the columnar to equiaxed transition (CET) occurred at the region right below the fusion line. A finite element (FE) model was used to investigate the relationship between the temperature gradient (G) and the solidification rate (R). The FE model showed a low G/R ratio at the region right below the interface promoting the CET. The grain size and material-dependent deformation behaviors are analyzed using digital image correlation (DIC). The lower deformation on the fine-grain regions observed in DIC analysis is attributed to a higher strain hardening rate, which is confirmed through dislocation density analysis on a tensile-interrupted specimen. The periodically alternating grain size coupled with the microstructural changes caused by intermittent deposition strategy result in a better strength-ductility synergy in both single-material and bimetallic specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A spatially-resolved model of neutron-irradiated tungsten coupling stochastic cluster dynamics and finite deformation plasticity

Structural materials used in nuclear reactors face severe degradation in mechanical properties, such as hardening and embrittlement. At the microscopic scale, this occurs due to creation and accumulation of irradiation-induced defects and their interaction with system dislocations. Although techniques exist which can model evolution of irradiation defects, for instance kinetic transport theory-based models, their interaction with mechanical deformation of the bulk material has not been investigated extensively. In this work, we demonstrate a novel spatially-resolved multiscale coupling between microscopic irradiation defect evolution, modeled using Stochastic Cluster Dynamics (SCD) and macroscopic mechanical deformation modeled using a finite-deformation plasticity model. SCD is used to determine the statistically averaged defect cluster spacing, dependent on operating conditions such as irradiation dose and temperature. This acts as an initial condition that governs the critical resolved shear stress of dislocation glide in the macroscopic plasticity model. This framework is used to predict mechanical behavior in post-mortem test of irradiated Tungsten samples, which has found its importance as structural material used in nuclear reactors. The results obtained using the coupled approach are in good agreement with experimental data of uniaxial tension tests. The model is able to capture the effect of temperature and irradiation dose on the material hardening. Two methods are proposed to estimate hardness – using Tabor's Law relating uniaxial yield stress to hardness and from flat-punch simulations. The results are in reasonable agreement with hardness data from micro-indentation experiments of irradiated Tungsten samples. Finally, the model is also able to reveal microstructural details such as spatial variation in defect density and local stress.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Anomalous entropy-driven kinetics of dislocation nucleation

The kinetics of dislocation reactions, such as dislocation multiplication, controls the plastic deformation in crystals beyond their elastic limit, therefore critical mechanisms in a number of applications in materials science. We present a series of large-scale molecular dynamics simulations that shows that one such type of reactions, the nucleation of dislocation at free surfaces, exhibit unconventional kinetics, including unexpectedly large nucleation rates under compression, very strong entropic stabilization under tension, as well as strong non-Arrhenius behavior. These unusual kinetics are quantitatively rationalized using a variational transition state theory approach coupled with an efficient numerical scheme for the estimation of vibrational entropy changes. These results highlight the need for a variational treatment of the kinetics to quantitatively capture dislocation reaction kinetics, especially at low-to-moderate strains where large deformations are required to activate reactions. These observations suggest possible explanations to previously observed unconventional deformation kinetics in both molecular dynamics simulations and experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Atomistic simulation of brittle-to-ductile transition in silicon carbide embedded with nano-sized helium bubbles

In this study, the tensile response of cubic silicon carbide (SiC) bulk containing cavities (voids and He bubbles) has been investigated using molecular dynamic simulations. The formation of cavities in SiC leads to a significant degradation in the mechanical properties of SiC with more influence on material fracture than initial elastic deformation. The brittle-to-ductile transition occurs in cavity-embedded SiC as the pressure in He bubbles increases. This is associated with the deformation mechanism that bond breaking at a low He bubble pressure transfers to extensive dislocation activities at a higher He bubble pressure. The cavities can effectively concentrate stress around them in the direction perpendicular to the tension, which leads to preferred cracking in the region with a higher tensile stress. The failure mechanism as revealed by this study improves understanding of property degradation in SiC that may be useful for applications of SiC in advanced nuclear energy systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Molecular dynamics study of hydrogen Cottrell atmosphere in aluminum: Influence of solute-solute interactions in the dislocation core

Cottrell atmospheres form when solute atoms segregate to dislocations, and is one of the most basic processes by which solutes alter mechanical properties of materials. In the case of hydrogen, Cottrell atmospheres are believed to contribute to hydrogen embrittlement. Here, in this study, we use direct molecular dynamics simulations to study the formation of hydrogen Cottrell atmospheres around edge dislocations in aluminum. Using coarse-graining techniques, we resolve the temporal and spatial evolution of the hydrogen concentration field. By comparing our results with theories of Cottrell atmosphere formation and thermodynamics, we show that a repulsive, concentration-dependent H-H interaction reduces the peak atmosphere concentration at the dislocation core. Furthermore, this interaction differs significantly from the H-H interaction that is experienced in the bulk away from a dislocation.

Aluminum↗
DOE OSTI2022

Non-local large-strain FFT-based formulation and its application to interface-dominated plasticity of nano-metallic laminates

Here, this paper presents a novel formulation and its robust numerical implementation of strain-gradient (SG) crystal plasticity within a large-strain (LS) elasto-viscoplastic (EVP) fast Fourier transform (FFT)-based micromechanical model. The resulting non-local SG-LS-EVPFFT formulation is used to model and understand the process of kink band formation during layer-parallel compression of nano-metallic laminates (NMLs). NMLs are layered composites with nanoscale thicknesses, thus requiring consideration of the interaction between dislocations and interfaces within the micromechanical model. The length-scale parameter of the SG model is calibrated by simulating a double pile-up and comparing predictions to analytical solution. This required new expressions for the defect energy, resulting in more accurate double pile-up predictions. The calibrated SG-LS-EVPFFT model is then used to simulate layer-parallel compression of copper-niobium NML. Formation of kink bands is predicted, and the model is used to rationalize the microscopic mechanisms enabling the formation process. It is found that accumulation of dislocations at interfaces leads to activation of layer-parallel slip, which in turn leads to kink band formation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Micro-beam bending of FCC bicrystals: A comparison between defect dynamics simulations and experiments

To understand the role of the grain boundary (GB) in plasticity at small scale, a concurrently coupled mesoscale plasticity model was developed to simulate micro-bending of bicrystalline micron-sized beams. By coupling dislocation dynamics (DD) with a finite element model (FEM), a novel defect dynamics model provides the means to investigate intricate interactions between dislocations and GBs under various loading conditions. Our simulations of micro-bending agree well with corresponding micro-bending experiments, and they show that mechanical response of bicrystals could have not only hardening but also softening depending on the characters of the GB. In addition, changing the location of the GB in the microbeams results in different mechanical responses; GBs located at the neutral plane show softening compared to single crystals, while inclined GBs located halfway along the length of the beam show little effect. In conclusion, simulation results could provide a clear picture on detailed dislocation-GB interactions, and quantitative resolved shear stress analysis supplemented by dislocation density distribution is used to analyze the mechanical response of bicrystalline samples.

36 MATERIALS SCIENCE↗
DOE OSTI2023

One dislocation at a time

The direct observation of enhanced dislocation mobility in iron by in situ electron microscopy offers key insights and adds to the ongoing debate on the mechanisms of hydrogen embrittlement. The tiniest atom in nature, hydrogen, is pervasive and sneaky. When hydrogen atoms, either from gas or liquid sources, come into contact with a metal, they rush into the solid and squeeze through the narrow spaces between the host atoms. Being chemically active, atomic hydrogen can potentially bind to either host or impurity atoms, forming hydrides and thus changing a material’s properties. Metals, which are well known and widely used in industry for their strength and ductility, can become dangerously brittle when exposed to hydrogen. Furthermore, this phenomenon is known as hydrogen embrittlement and can lead to catastrophic failure of a load-bearing part. For example, the hydrogen produced when water molecules break apart in coolants in a nuclear reactor can cause sudden failure of the pressure vessel. In another example, although blending hydrogen in natural-gas pipelines provides a promising pathway to transition into the hydrogen economy, it could lower the fatigue resistance of the pipeline steel, making it more susceptible to crack growth due to cyclic loading induced by pressure fluctuations in the pipeline. Remarkably, perhaps as a result of a multitude of recognized failure mechanisms in which hydrogen can potentially participate, it still remains unknown exactly why hydrogen makes a metal brittle. Now, writing in Nature Materials, Longchao Huang and colleagues present unambiguous experimental observations of hydrogen-enhanced dislocation mobility in iron, offering key insights into the hydrogen embrittlement mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In-situ synchrotron diffraction study of the localized phase transformation and deformation behavior in NiTi SMA

The accumulation of dislocation defect was generally recognized as the origin of residual strain and the pseudoelastic instability in NiTi shape memory alloys (SMAs). In the present work, the pseudoelastic instability was studied by comparing the characteristics of Luders-type and uniform transformation mechanism via in-situ synchrotron-based high-energy X-ray diffraction (XRD) characterization. The experimental results showed that the Liiders-type mechanism could result in an intense and sharp increase of stress-induced martensite at the expense of austenite. The residual austenite with high lattice strain within the Luders band might be fully martensitic beyond the stress plateau of the E-a curve. With the accumulation of dislocation defect, the uniform martensitic transformation took place by the progressively homogeneous nucleation and growth of martensite in a local region. While the residual martensite and dislocation density was stabilized during mechanical cycling, the deformation of NiTi SMA turned into a mixture of (i) a balanced forward and reverse phase transformation between austenite and martensite, as well as (ii) the elastic deformation of the aggregate. As a result, there was no apparent increase in dislocation density detected during further cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Link statistics of dislocation network during strain hardening

Dislocations are line defects in crystals that multiply and self-organize into a complex network during strain hardening. The length of dislocation links, connecting neighboring nodes within this network, contains crucial information about the evolving dislocation microstructure. By analyzing data from Discrete Dislocation Dynamics (DDD) simulations in face-centered cubic (fcc) Cu, we characterize the statistical distribution of link lengths of dislocation networks during strain hardening on individual slip systems. Here, our analysis reveals that link lengths on active slip systems follow a double-exponential distribution, while those on inactive slip systems conform to a single-exponential distribution. The distinctive long tail observed in the double-exponential distribution is attributed to the stress-induced bowing out of long links on active slip systems, a feature that disappears upon removal of the applied stress. We further demonstrate that both observed link length distributions can be explained by extending a one-dimensional Poisson process to include different growth functions. Specifically, the double-exponential distribution emerges when the growth rate for links exceeding a critical length becomes super-linear, which aligns with the physical phenomenon of long links bowing out under stress. This work advances our understanding of dislocation microstructure evolution during strain hardening and elucidates the underlying physical mechanisms governing its formation.

Crystal plasticity↗