SEARCH · Search NASA

Results for “Distortion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1992

A study on vortex flow control on inlet distortion in the re-engined 727-100 center inlet duct using computational fluid dynamics

Computational fluid dynamics was used to investigate the management of inlet distortion by the introduction of discrete vorticity sources at selected locations in the inlet for the purpose of controlling secondary flow. These sources of vorticity were introduced by means of vortex generators. A series of design observations were made concerning the importance of various vortex generator design parameters in minimizing engine face circumferential distortion. The study showed that vortex strength, generator scale, and secondary flow field structure have a complicated and interrelated influence on the engine face distortion, over and above the initial geometry and arrangement of the generators. The installed vortex generator performance was found to be a function of three categories of variables: the inflow conditions, the aerodynamic characteristics associated with the inlet duct, and the design parameters related to the geometry, arrangement, and placement of the vortex generators within the outlet duct itself.

Anderson, Bernhard H.↗

NASA NTRS1992

A comparison of predicted and measured inlet distortion flows in a subsonic axial inlet flow compressor rotor

Detailed flow measurements were taken inside an isolated axial compressor rotor operating subsonically near peak efficiency. These Laser Anemometer measurements were made with two inlet velocity profiles. One profile consisted of an unmodified baseline flow, and the second profile was distorted by placing axisymmetric screens on the hub and shroud well upstream of the rotor. A detailed comparison in the rotor relative reference frame between a Navier-Stokes solver and the measured experimental results showed good agreement between the predicted and measured flows. A primary flow is defined in the rotor and deviations and the computed predictions is made to assess the development of a passage vortex due to the distortion of the inlet flow. Computer predictions indicate that a distorted inlet profile has a minimal effect on the development of the flow in the rotor passage and the resulting passage vortex.

Owen, Albert K.↗

NASA NTRS1992

Ultra high bypass Nacelle aerodynamics inlet flow-through high angle of attack distortion test

A flow-through inlet test program was conducted to evaluate inlet test methods and determine the impact of the fan on inlet separation when operating at large angles of attack. A total of 16 model configurations of approximately 1/6 scale were tested. A comparison of these flow-through results with powered data indicates the presence of the fan increased separation operation 3 degrees to 4 degrees over the flow through inlet. Rods and screens located at the fan face station, that redistribute the flow, achieved simulation of the powered-fan results for separation angle of attack. Concepts to reduce inlet distortion and increase angle of attack capability were also evaluated. Vortex generators located on the inlet surface increased inlet angle of attack capability up to 2 degrees and reduced inlet distortion in the separated region. Finally, a method of simulating the fan/inlet aerodynamic interaction using blockage sizing method has been defined. With this method, a static blockage device used with a flow-through model will approximate the same inlet onset of separation angle of attack and distortion pattern that would be obtained with an inlet model containing a powered fan.

Larkin, Michael J.↗

NASA NTRS1992

Analysis of sonic boom data to quantify distortions of shock profiles

Researchers at Penn State have been examining some sonic boom waveforms recorded during overflights by the Air Force which have become available to NASA and its contractors. The quality of the digitized data and the supporting meteorological data was such that one could test the applicability of molecular relaxation theories. In the late sixties, it had been supposed that the finite rise times in the absence of turbulence had neglected the vibrational relaxation of nitrogen molecules. Bass et al. have demonstrated that molecular relaxation definitely gives the correct order of magnitude of the observed rise times. However, the Air Force data in conjunction with the recent steady-state shock profile model theory of Kang and Pierce give the first opportunity to make a detailed quantitative assessment of the molecular relaxation hypothesis. Currently an investigation is ongoing to establish a method of quantifying the distortion of a sonic boom wave from a classic N-wave shape using the Air Force data taken at Edwards AFB in 1987. Using the premise that energy will be conserved approximately for a sonic boom wave both before and after the boom passes through the Earth's turbulent boundary layer, a classic undistorted waveform is constructed from the distorted signature received at the ground. A correlation between the mean-squared deviation of the distorted and undistorted waveforms and the distance the boom travels through the turbulence is sought.

Gionfriddo, Thomas A.↗

NASA NTRS1992

Application of Computational Fluid Dynamics to the Study of Vortex Flow Control for the Management of Inlet Distortion

The present study demonstrates that the Reduced Navier-Stokes code RNS3D can be used very effectively to develop a vortex generator installation for the purpose of minimizing the engine face circumferential distortion by controlling the development of secondary flow. The computing times required are small enough that studies such as this are feasible within an analysis-design environment with all its constraints of time and costs. This research study also established the nature of the performance improvements that can be realized with vortex flow control, and suggests a set of aerodynamic properties (called observations) that can be used to arrive at a successful vortex generator installation design. The ultimate aim of this research is to manage inlet distortion by controlling secondary flow through an arrangements of vortex generators configurations tailored to the specific aerodynamic characteristics of the inlet duct. This study also indicated that scaling between flight and typical wind tunnel test conditions is possible only within a very narrow range of generator configurations close to an optimum installation. This paper also suggests a possible law that can be used to scale generator blade height for experimental testing, but further research in this area is needed before it can be effectively applied to practical problems. Lastly, this study indicated that vortex generator installation design for inlet ducts is more complex than simply satisfying the requirement of attached flow, it must satisfy the requirement of minimum engine face distortion.

Anderson, Bernhard H.↗

NASA NTRS1992

A study on vortex flow control of inlet distortion in the re-engined 727-100 center inlet duct using computational fluid dynamics

Anderson, Bernhard H.↗

NASA NTRS1993

Corrections to fringe distortion due to flow density gradients in optical interferometry

An analytical method is formulated to account for distortions of optical interferograms used for studies of flow over airfoils experiencing dynamic stall. It is shown that such distortions are generated primarily due to optical path deflections in the test flow, caused by large density gradients. Such in-flow optical path deflections are neglected in conventional optical techniques for flow studies. The present method employs a ray analysis to determine these in-flow optical path deflections, and accurately predicts the interferogram distortions.

Cho, Y. C.↗

NASA NTRS1992

Measurement and calibration of static distortion of position data from 3D trackers

Three-dimensional trackers are becoming increasingly important as user inputs in interactive computer systems. These trackers output the three-dimensional position, and often the orientation, of a sensor in space. The three-dimensional tracking is often, however, highly distorted and inaccurate. The purpose of this paper is to discuss methods for the measurement and characterization of the static distortion of the position data. When the distortion is constant, various methods can be used to calibrate the data from the tracker to increase accuracy. Several preliminary methods are discussed in this paper, including polynomial and weighted lookup methods. The measurement and calibration methods are applied to the Polhemus electromagnetic tracking system, but are applicable to tracking systems based on other technologies.

Bryson, Steve↗

NASA NTRS1950

The Effect of Nonuniform Temperature Distributions on the Stresses and Distortions of Stiffened-Shell Structures

The structural effects of nonuniform temperature distributions, such as those produced by aerodynamic heating or thermal ice-prevention systems, are discussed and found to be of two types: The introduction of thermal stresses and distortions as a result of restrained thermal expansion and a change in the stresses and distortions produced by the applied loads as a result of the variation of elastic properties of materials with temperature. These effects are illustrated by sample analyses of the stress and distortion distributions of simple box beams and by calculation of the stresses on a typical wing section.

ALUMINUM ALLOYS - ALCOA 75ST6 - ELASTICITY↗

NASA NTRS1956

Development of flow distortions in a full-scale nacelle inlet at Mach numbers 0.63 and 1.6 to 2.0

The nature of flow-distortion development in the subsonic diffuser was determined for a typical full-scale axisymmetric nose inlet at Mach numbers to 2.0 and angles of attack to -8 degrees. Inlet design variables studied included 14 degrees and 17 degrees internalcowl lip angles conical compression surfaces with and without boundary-layer removal slots, and cone tip translation. Data presented include the inlet overall pressure recovery, mass flow, and distortion at the diffuser exit. Primary emphasis in the data, however, is placed on critical inlet operation, for which the flow distortion is traced from the inlet throat to the diffuser exit.

Piercy, Thomas G↗

NASA NTRS1994

Implications for high speed research: The relationship between sonic boom signature distortion and atmospheric turbulence

In this study there were two primary tasks. The first was to develop an algorithm for quantifying the distortion in a sonic boom. Such an algorithm should be somewhat automatic, with minimal human intervention. Once the algorithm was developed, it was used to test the hypothesis that the cause of a sonic boom distortion was due to atmospheric turbulence. This hypothesis testing was the second task. Using readily available sonic boom data, we statistically tested whether there was a correlation between the sonic boom distortion and the distance a boom traveled through atmospheric turbulence.

Sparrow, Victor W.↗

NASA NTRS1995

Hot gas in superclusters and microwave background distortions

Variations in the electron pressure can produce significant distortions of the cosmic microwave background radiation (CMBR) spectrum through the Sunyaev-Zel'dovich effect. In this paper, we compute the amplitude of these distortions in various cosmological scenarios using the results of hydrodynamical simulations combined with analytic theory. For reionized cold dark matter (CDM) with h = 0.5 probed with the OVRO experiment (Theta approximately = 0.1 deg), we find that the amplitude of these fluctuations is (Delta T/T)(sub rms) = 1 x 10(exp -5) (Omega(sub i)/0.06) if the experiment looks at a random part of the sky and 6 x 10(exp -6)(Omega(sub i)/(0.06) if bright areas are avoided. Here Omega is the density of ionized baryons in units of the critical density, rho(sub c) = 2.78 x 10(exp 11)h(exp 2)/cu Mpc. Primary fluctuations would generate (Delta T/T)(sub rms) approximately = 2 x 10(exp -6) for this model. These distortions could be a dominant source of CMBR anisotropics on small and intermediate angular scales. It is important to note that these signals are generated relatively recently, when nonlinear effects are improtant, and do not require early reionization. We also examine the contribution to anisotropies from the Doppler effect, in both the linear and nonlinear regimes. In this case, the bulk of the signal is generated before a redshift of 10, provided that the intercluster medium is ionized back to the surface of last scattering. On the smallest scales thermal effects are bigger, while, on larger scales the Doppler-induced fluctuations are greater with the exact boundary determined by the scenario. However, over a wide range of scales, the two signals are equal to within a factor of a few.

Persi, Fred M.↗

NASA NTRS1996

Vortex generator installation studies on steady state and dynamic inlet distortion

The theoretical and experimental work carried out under the NASA/MOD Joint Aeronautical Program has shown that CFD vortex generator installations designs successfully managed inlet duct flow distortion and that significant benefits in flow unsteadiness at the engine face were also present. The main conclusions to date from the collaborative effort between NASA/Lewis and DRA/Bedford are as follows: (1) vortex generator installations can be designed to be effective over a wide range of inlet operating conditions using Computational Fluid Dynamics and formal optimization procedures, (2) reductions in steady state engine face distortion of up to 80% have been measured in the M2129 inlet S-duct using CFD designed vortex generator installations, (3) reductions in flow unsteadiness of up to 80% have been measured in the W129 inlet S-duct using CFD designed vortex generator installations, and (4) the Reduced Navier-Stokes code RNS3D is a useful tool to design vortex generator installations to manage engine face distortions over a wide range of inlet operating conditions.

Anderson, Bernhard H.↗

NASA NTRS1996

Distortion Representation of Forecast Errors for Model Skill Assessment and Objective Analysis

We study a novel characterization of errors for numerical weather predictions. In its simplest form we decompose the error into a part attributable to phase errors and a remainder. The phase error is represented in the same fashion as a velocity field and will be required to vary slowly and smoothly with position. A general distortion representation allows for the displacement and a bias correction of forecast anomalies. In brief, the distortion is determined by minimizing the objective function by varying the displacement and bias correction fields. In the present project we use a global or hemispheric domain, and spherical harmonics to represent these fields. In this project we are initially focusing on the assessment application, restricted to a realistic but univariate 2-dimensional situation. Specifically we study the forecast errors of the 500 hPa geopotential height field for forecasts of the short and medium range. The forecasts are those of the Goddard Earth Observing System data assimilation system. Results presented show that the methodology works, that a large part of the total error may be explained by a distortion limited to triangular truncation at wavenumber 10, and that the remaining residual error contains mostly small spatial scales.

Hoffman, Ross N.↗

NASA NTRS1997

An Inlet Distortion Assessment During Aircraft Departures at High Angle of Attack for an F/A-18A Aircraft

The F404-GE-400-powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the quality of inlet airflow during departed flight maneuvers, that is, during flight outside the normal maneuvering envelope where control surfaces have little or no effectiveness. Six nose-left and six nose-right departures were initiated at Mach numbers between 0.3 and 0.4 at an altitude of 35 kft. The entry yaw rates were approximately 40 to 90 deg/sec. Engine surges were encountered during three of the nose-left and one of the nose-right departures. Time-variant inlet-total-pressure distortion levels at the engine face did not significantly exceed those at maximum angle-of-attack and sideslip maneuvers during controlled flight. Surges caused by inlet distortion levels resulted from a combination of high levels of inlet distortion and rapid changes in aircraft position. These rapid changes indicate a combination of engine support and gyroscopic loads being applied to the engine structure that impact the aerodynamic stability of the compressor through changes in the rotor-to-case clearances. This document presents the slides from an oral presentation.

Steenken, William G.↗

NASA NTRS1961

Measurements and Calculations of the Effects of Distortions in the Collector Surface on Efficiencies of Umbrella-Type Solar Collectors

The meridional tensions along the ribs in a Mylar-covered umbrella-type solar collector produce a distortion in the reflecting surface that is detrimental to the image in the focal plane. The investigation reported herein was made to obtain measured and calculated geometric efficiencies of umbrella-type collectors as affected by these surface distortions. These studies show that if the tension transverse to the ribs is increased relative to the meridional tensions, the distortion is reduced and higher efficiencies can be attained, and if the transverse tension is small, the number of ribs in the collector must be increased for higher efficiencies.

Bond, Victor R.↗

NASA NTRS1998

Distortion Representation of Forecast Errors for Model Skill Assessment and Objective Analysis

We proposed a novel characterization of errors for numerical weather predictions. A general distortion representation allows for the displacement and amplification or bias correction of forecast anomalies. Characterizing and decomposing forecast error in this way has several important applications, including the model assessment application and the objective analysis application. In this project, we have focused on the assessment application, restricted to a realistic but univariate 2-dimensional situation. Specifically, we study the forecast errors of the sea level pressure (SLP), the 500 hPa geopotential height, and the 315 K potential vorticity fields for forecasts of the short and medium range. The forecasts are generated by the Goddard Earth Observing System (GEOS) data assimilation system with and without ERS-1 scatterometer data. A great deal of novel work has been accomplished under the current contract. In broad terms, we have developed and tested an efficient algorithm for determining distortions. The algorithm and constraints are now ready for application to larger data sets to be used to determine the statistics of the distortion as outlined above, and to be applied in data analysis by using GEOS water vapor imagery to correct short-term forecast errors.

Hoffman, Ross N.↗

NASA NTRS1999

Tilt Modulation Distortions in Wave Topography Measured by a Scanning Radar Altimeter

Work continues on estimating tilt modulation distortions in the wave topography measured by a scanning radar altimeter. To quantify this effect, a two-dimensional simulation has been performed in the cross-track plane only which assumed that sinusoidal waves of constant wavelength propagate in the cross-track direction (and are infinitely long-crested in the along-track direction). The initial results reported earlier for a Gaussian surface scattering model indicated that when the highest reasonable value of mss is used in the simulation (the Plant limit of 0.08), the nadir values of the ratio of the apparent to actual wave height are the same as for the omnidirectional scattering case. But as the off-nadir angle increased, the apparent wave height increased and became larger than the actual wave height by about 10 degrees off-nadir. And the shorter the wavelength, the larger the apparent wave height increase. This represented a systematic over-estimate of the wave amplitude for waves propagating in the cross-track direction. For lower values of mss the situation worsened. The simulation has been improved by incorporating actual variations of backscattered power with incidence angle measured by the SRA instead of the Gaussian model. The resulting distortion was about half that originally reported. The 3-dimensional simulation to model waves propagating at various azimuthal angles relative to the cross-track plane is still in progress. The results of this model will be verified by comparing them with Scanning Radar Altimeter (SRA) data and optimum correction procedures will be developed. An assessment of the improved 2-dimensional model indicates that the distortion will generally be small in the data taken during the Southern Ocean Waves Experiment (SOWEX) presently be analyzed. But tilt modulation effects are of great concern for SRA data collected during the 1998 hurricane season since the minimum aircraft altitude was 1.5 km and it frequently flew higher. For a given wave length and steepness, the effect increases with increasing aircraft altitude, and is larger for waves propagating in the cross-track direction, which was generally the situation during the hurricane flights.

Walsh, Edward J.↗