Search NASA⌕ Search

SEARCH · Search NASA

Results for “Doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Weak ferromagnetism of Cu x Fe 1 + y As and its evolution with Co doping

We have investigated electronic and magnetic properties of iron pnictide Cu x Fe 1+y As, which is isostructural to iron pnictide superconductors LiFeAs and NaFeAs, using polycrystalline and single crystal samples. Here, we found that Cu x Fe 1+y As is characterized by strong electron correlations and shows weak ferromagnetic behavior with the Curie temperature T c ~ 42 K, in contrast with the superconductivity in LiFeAs and NaFeAs. Its electronic transport properties exhibit quasi-two-dimensional characteristics: while the in-plane resistivity follows quadratic temperature dependence for T < 10K, the c-axis resistivity shows nonmetal-to-metal crossover near 20 K. In addition, we have studied Co doping effect on Cu x Fe 1+y As and found that Co doping enhances the ferromagnetism with T c increasing up to 83 K for Cu x Fe 0.5 Co 0.5 As. From these results, we discussed the origin of the ferromagnetism of Cu x Fe 1+y As and its relevance with the magnetism of iron pnictide superconductor parent compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Electrical Conductivity in Poly(3-hexylthiophene)/Fluorinated Tetracyanoquinodimethane Nanowires Grown with a Porous Alumina Template

Here, we report on improved electrical conductivity in poly(3-hexylthiophene) (P3HT)/2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) composite nanowires grown using an anodized aluminum oxide (AAO) template. The electrical conductivity of individual nanowire measured by four-probe scanning tunneling microscopy shows that F4-TCNQ molecules are effectively doped into P3HT by capillary force. The resistivity is tuned in the 0.1–10 Ω cm range by changing the F4-TCNQ concentration from 10 to 0.1 wt % and is 2–4 orders of magnitude smaller than that of the corresponding P3HT/F4-TNCQ thin film composites. Lastly, the AAO template-assisted synthesis approach thus appears to be effective for high chemical doping and for improving the electrical conductivity of the molecular wires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of samarium doping on the nucleation of fcc-aluminum in undercooled liquids

In this paper, the effect of Sm doping on the fcc-Al nucleation was investigated in Al-Sm liquids with low Sm concentrations (x Sm ) with molecular dynamics simulations. The nucleation in the moderately undercooled liquid is achieved by the recently developed persistent-embryo method. Systematically computing the nucleation rate with different x Sm (x Sm = 0%, 1%, 2%, 3%, 5%) at 700 K, we found Sm dopant reduces the nucleation rate by up to 25 orders of magnitudes with only 5% doping concentration. Finally, this effect is mostly associated with the increase in the free energy barrier with minor contribution from suppression of the attachment to the nucleus caused by Sm doping.

36 MATERIALS SCIENCE↗

The Effect of Fluoride Doping on Lithium Diffusivity in Layered Molybdenum Oxide

The effects of cation doping on cathode performance has been extensively studied; however, the field of anion doping has historically received much less attention. Fluoride doping Can greatly increase the initial diffusivity of the layered MoO3 system. The first discharge cycle of the layered alpha-MoO3 and MoO2.8F0.2 phases were investigated and compared using the galvanostatic intermittent titration technique (GITT) in a lithium ion cell. The analysis revealed that a slight reduction of the oxide by fluoride doping to form a fluorobronze (MoO2.8F0.2) eliminated a slow electrochemical process observed in alpha-MoO3. Galvanostatic cycling studies show that while alpha-MoO3 has a higher initial capacity, it exhibits a first cycle Coulombic efficiency of only 86% with rapid capacity fade which has been associated with lithium trapping within the MoO3 layer. In contrast, the Li+ intercalation process in the fluorobronze was found to have a 94% Coulombic efficiency on the first cycle. By the third cycle Coulombic efficiencies greater than 99% were observed for five cycles. A thorough investigation of the synthesis of MoO2.8F0.2 is also presented. Under mild hydrothermal conditions, the fluorination of alpha-MoO3 to form MoO2.8F0.2 is topotactic, while a competing reaction in solution forms MoO2.4F0.6 (ReO3 structure). Methods to prevent the solution phase reaction from occurring are discussed.

batteries↗

Phonons in Potassium-doped Graphene: The Effects of Electron-phonon Interactions, Dimensionality, and Adatom Ordering

Graphene phonons are measured as a function of electron doping via the addition of potassium adatoms. In the low doping regime, the in-plane carbon G peak hardens and narrows with increasing doping, analogous to the trend seen in graphene doped via the field effect. At high dopings, beyond those accessible by the field effect, the G peak strongly softens and broadens. This is interpreted as a dynamic, nonadiabatic renormalization of the phonon self-energy. At dopings between the light and heavily doped regimes, we find a robust inhomogeneous phase where the potassium coverage is segregated into regions of high and low density. The phonon energies, linewidths, and tunability are notably very similar for one- to four-layer potassium-doped graphene, but significantly different to bulk potassium-doped graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross-section imaging and p-type doping assessment of ZnO/ZnO:Sb core-shell nanowires by scanning capacitance microscopy and scanning spreading resistance microscopy

ZnO/ZnO:Sb core-shell structured nanowires (NWs) were grown by the metal organic chemical vapor deposition method where the shell was doped with antimony (Sb) in an attempt to achieve ZnO p-type conduction. To directly investigate the Sb doping effect in ZnO, scanning capacitance microscopy (SCM) and scanning spreading resistance microscopy (SSRM) were performed on the NWs' cross-sections mapping their two dimensional (2D) local electrical properties. Although no direct p-type inversion in ZnO was revealed, a lower net electron concentration was pointed out for the Sb-doped ZnO shell layer with respect to the non-intentionally doped ZnO core, indicating an evident compensating effect as a result of the Sb incorporation, which can be ascribed to the formation of Sb-related acceptors. The results demonstrate SCM/SSRM investigation being a direct and effective approach for characterizing radial semiconductor one-dimensional (1D) structures and, particularly, for the doping study on the ZnO nanomaterial towards its p-type realization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Silver nanoparticles enhanced luminescence properties of Er³⁺ doped tellurite glasses: Effect of heat treatment

Tellurite glasses doped Er³⁺ ions and containing Silver nanoparticles (Ag NPs) are prepared using melt quenching technique. The nucleation and growth of Ag NPs were controlled by a thermal annealing process. The X-ray diffraction pattern shows no sharp peak indicating an amorphous nature of the glasses. The presence of Ag NPs is confirmed from transmission electron microscopy micrograph. Absorption spectra show typical surface plasmon resonance (SPR) band of Ag NPs within the 510–550 nm range in addition to the distinctive absorption peaks of Er³⁺ ions. The Judd-Ofelt (J-O) intensity parameters, oscillator strengths, spontaneous transition probabilities, branching ratios, and radiative lifetimes were successfully calculated based on the experimental absorption spectrum and the J-O theory. It was found that the presence of silver NPs nucleated and grown during the heat annealing process improves both of the photoluminescence (PL) intensity and the PL lifetime relative to the ⁴I 13/2 → ⁴I 15/2 transition. Optimum PL enhancement was obtained after 10 h of heat-treatment. Such enhancements are mainly attributed to the strong local electric field induced by SPR of silver NPs and also to energy transfer from the surface of silver NPs to Er³⁺ ions, whereas the quenching is ascribed to the energy transfer from Er³⁺ ions to silver NPs. Using the Mc Cumber method, absorption cross-section, calculated emission cross-section, and gain cross-section for the ⁴I 13/2 → ⁴I 15/2 transition were determined and compared for the doped and co-doped glasses. The present results indicate that the glass heat-treated for 10 h has good prospect as a gain medium applied for 1.53 μm band broad and high-gain erbium-doped fiber amplifiers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial strain modulated electronic properties of interface controlled nickelate superlattices

For this study, perovskite nickelate heterostructures consisting of single unit cells of EuNiO 3 and LaNiO 3 have been grown on a set of single crystalline substrates by pulsed laser interval deposition to investigate the effect of epitaxial strain on electronic and magnetic properties at the extreme interface limit. Despite the variation of substrate in-plane lattice constants and lattice symmetry, the structural response to heterostructuring is primarily controlled by the presence of the EuNiO 3 layer. In sharp contrast to bulk LaNiO 3 or EuNiO 3 , the superlattices grown under tensile strains exhibit metal-to-insulator transitions (MIT) below room temperature. The onset of magnetic and electronic transitions associated with the MIT can be further separated by application of large tensile strain. Furthermore, these transitions can be entirely suppressed by very small compressive strain. X-ray resonant absorption spectroscopy measurements reveal that such strain-controlled MIT is directly linked to a strain-induced self-doping effect without any chemical doping.

36 MATERIALS SCIENCE↗

Improving chemical vapor deposition graphene conductivity using molybdenum trioxide: An in-situ field effect transistor study

By using in situ field effect transistor characterization integrated with molecular beam epitaxy technique, we demonstrate the strong surface transfer p-type doping effect of single layer chemical vapor deposition (CVD) graphene, through the surface functionalization of molybdenum trioxide (MoO{sub 3}) layer. After doping, both the hole and electron mobility of CVD graphene are nearly retained, resulting in significant enhancement of graphene conductivity. With coating of 10 nm MoO{sub 3}, the conductivity of CVD graphene can be increased by about 7 times, showing promising application for graphene based electronics and transparent, conducting, and flexible electrodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferroelectric gate effect in modulation doped CdTe/CdMgTe quantum wells

We show an effective control of the carrier concentration confined in a modulation doped CdTe quantum well caped by a ferroelectric CdZnTe gate. The 2DEG concentration can by permanently changed by changing the direction of the build-in electric field of the ferroelectric CdZnTe gate. The concentration of the 2DEG changes by 30% upon a poling of the gate. The effect is reproducible. It can be employed in non-volatile memories.

36 MATERIALS SCIENCE↗

Enhanced monolayer MoS{sub 2}/InP heterostructure solar cells by graphene quantum dots

We demonstrate significantly improved photovoltaic response of monolayer molybdenum disulfide (MoS{sub 2})/indium phosphide (InP) van der Waals heterostructure induced by graphene quantum dots (GQDs). Raman and photoluminescence measurements indicate that effective charge transfer takes place between GQDs and MoS{sub 2}, which results in n-type doping of MoS{sub 2}. The doping effect increases the barrier height at the MoS{sub 2}/InP heterojunction, thus the averaged power conversion efficiency of MoS{sub 2}/InP solar cells is improved from 2.1% to 4.1%. The light induced doping by GQD provides a feasible way for developing more efficient MoS{sub 2} based heterostructure solar cells.

14 SOLAR ENERGY↗

High-voltage vertical GaN Schottky diode enabled by low-carbon metal-organic chemical vapor deposition growth

Vertical GaN Schottky barrier diode (SBD) structures were grown by metal-organic chemical vapor deposition on free-standing GaN substrates. The carbon doping effect on SBD performance was studied by adjusting the growth conditions and spanning the carbon doping concentration between ≤3 × 1015 cm−3 and 3 × 1019 cm−3. Using the optimized growth conditions that resulted in the lowest carbon incorporation, a vertical GaN SBD with a 6-μm drift layer was fabricated. A low turn-on voltage of 0.77 V with a breakdown voltage over 800 V was obtained from the device.

Cao, Y. (ORCID:0000000185535079)↗

Effect of niobium doping on excitonic dynamics in MoSe 2

Abstract Transition metal dichalcogenides (TMDs) have emerged as attractive two-dimensional semiconductors for future electronic and optoelectronic applications. Their charge transport properties, such as conductivity and the type of charge carriers, can be effectively controlled by substitutional doping of the transition metal atoms. However, the effects of doping on the excitonic properties, particularly their dynamical properties, have been less studied. Using Nb-doped MoSe 2 as a case study, we experimentally investigate the effect of doping on excitonic dynamics in TMDs. Transient absorption measurements are used to directly compare the dynamical properties of excitons in Nb-doped MoSe 2 across monolayer, bilayer, and bulk flakes with their undoped counterparts. The exciton lifetimes in Nb-doped flakes are significantly shorter than those in their undoped counterparts. This effect is attributed to the trapping of excitons in defect states introduced by Nb impurities. These results reveal an important consequence of Nb doping on excitonic dynamics in TMDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of nitrogen doping and pressure on the stability of $\mathrm{LuH_3}$

A report on the near-ambient superconductivity in a nitrogen-doped lutetium hydride has stimulated great interest in this material [Dasenbrock-Gammon et al. , Nature (London) 615, 244 (2023)]. While its superconductivity is still a subject of debate, the structure of the claimed cubic phase remains uncertain. In this work, we study the effect of nitrogen doping and pressure on the energetic and dynamic stability of cubic $\mathrm{LuH_3}$. Our findings indicate that both pressure and nitrogen doping can enhance the stability of the cubic $\mathrm{LuH_3}$ phase. Here, we propose a $\mathrm{Lu_8}$$\mathrm{H_{21}}$$\mathrm{Lu}$ structure that exhibits a stable phonon, reasonable thermodynamic stability at 1 GPa, and an x-ray diffraction pattern similar to the experimental data. However, we do not observe electron-phonon coupling in the zone-center phonon modes of these crystal structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic order in a quenched-high-temperature-phase of Cu-doped MnBi

Permanent magnets are of great importance due to their vast applications. MnBi has been proposed to be a potential permanent magnet that can be widely used while past efforts have been focused on optimizing the ferromagnetic low-temperature phase of MnBi. Herein, we report a series of new materials, Cu x Mn 1–x Bi, crystallizing in a quenched high-temperature-phase (QHTP) MnBi-related structure. In this study, we synthesized single crystals of Cu x Mn 1–x Bi and found that they crystallize in an unreported trigonal structure (P$\bar{3}$1c). Magnetic properties measurements imply high-temperature antiferromagnetic (AFM) ordering and low-temperature ferromagnetic or ferrimagnetic (FM/FiM) ordering. By analyzing the doping effect on crystal structure and magnetic properties, we established a magnetic phase diagram for Cu-doped MnBi and attributed the AFM and FM/FiM to two different atomic sites of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cluster related hole traps with enhanced-field-emission--the source for long term annealing in hadron irradiated Si diodes

Cluster related defects were investigated by the thermally stimulated current (TSC) method in neutron irradiated n-type Si diodes during 80 deg. C annealing. Three hole traps labeled H (116 K), H (140 K), and H (152 K) proved to have an electric-field-enhanced emission characteristic of Coulombic wells. Their zero field emission rates were deduced describing the TSC peaks with the three-dimensional Poole-Frenkel formalism when accounting for the electric field distribution. As acceptors in the lower half of the gap, these centers have a direct impact on the effective doping of the n-type diodes. They are revealed as causing the long term annealing effects.

36 MATERIALS SCIENCE↗

Rapid flame doping of Co to WS 2 for efficient hydrogen evolution

Transition metal sulfides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). Though elemental doping is an effective way to enhance sulfide activity for the HER, most studies have only focused on the effect of doping sulfide edge sites. Few studies have investigated the effect of doping the basal plane or the effect of doping concentration on basal plane activity. Probing the dopant concentration dependence of HER activity is challenging due to experimental difficulties in controlling dopant incorporation. We overcome this challenge by first synthesizing doped transition metal oxides and then sulfurizing the oxides to sulfides, yielding core/shell Co-doped WS 2 /W 18 O 49 nanotubes with a tunable amount of Co. Our combined density functional theory (DFT) calculations and experiments demonstrate that the HER activity of basal plane WS 2 changes non-monotonically with the concentration of Co due to local changes in the binding energy of H and the formation energy of S-vacancies. At an optimal Co doping concentration, the overpotential to reach -10 mA cm -2 is reduced by 210 mV, and the Tafel slope is reduced from 122 to 49 mV per decade (mV dec -1 ) compared to undoped WS 2 nanotubes.

08 HYDROGEN↗

Effect of Y doping on thermal properties of multiferroic BiCrO{sub 3}

The effect of Yttrium doping (0.01 ≤ x ≤ 0.5) on elastic and thermal properties of multiferroic BiCrO{sub 3} has been investigated using the Modified Rigid Ion Model (MRIM). We have computed the specific heat and volume thermal expansion coefficient for pure and doped BiCrO{sub 3} as a function of temperature (1K ≤ T ≤ 300K). The specific heat results are in good agreement with the available experimental data. A check on thermal stability of the pure and doped compounds is made by computing other properties like Debye temperature, cohesive energy and bulk modulus.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗