Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic light scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evidence for Bootstrap Percolation Dynamics in a Photoinduced Phase Transition

Upon intense femtosecond photo-excitation, a many-body system can undergo a phase transition through a non-equilibrium route, but understanding these pathways remains an outstanding challenge. Here, we use time-resolved second harmonic generation to investigate a photo-induced phase transition in Ca 3 Ru 2 O 7 and show that mesoscale inhomogeneity profoundly influences the transition dynamics. We observe a marked slowing down of the characteristic time τ that quantifies the transition between two structures. τ evolves non-monotonically as a function of photo-excitation fluence, rising from below 200 fs to ~1.4 ps, then falling again to below 200 fs. To account for the observed behavior, we perform a bootstrap percolation simulation that demonstrates how local structural interactions govern the transition kinetics. Finally, our work highlights the importance of percolating mesoscale inhomogeneity in the dynamics of photo-induced phase transitions and provides a model that may be useful for understanding such transitions more broadly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

J/ψ photoproduction at the threshold with GlueX

High-statistics total cross sections for the vector meson photoproduction at the threshold: γp → ωp (from A2 at MAMI, ELPH, and CBELSA), γp → ϕp (from CLAS6 at JLab and LEPS at SPring-8), and γp → J/ψp (from GlueX at JLab) allow one to extract the absolute value of vector meson nucleon scattering length using Vector Meson Dominance (VMD) model. The “young” vector meson hypothesis may explain the fact that the obtained scattering length values for the nucleon. ϕ-meson compared to the typical hadron size of approximately ∼ 1 fm indicates that the proton is more transparent for the ϕ-meson compared to the ω-meson and is much less transparent than the J/ψ-meson. The extended analysis of Υ-meson photoproduction using quasi-data from the QCD approach is in perfect agreement with the light-meson findings using experimental data. Finally, the ability of J-PARC to measure $π^{–}p → ϕn$ and $π^{–}p → J/ψn$ at the threshold, which are free from the VMD model, is presented. It enables one to understand the dynamics of $s\bar{s}$ and $c\bar{c}$ production at threshold and to search for the effects of LHCb’s heavy quark exotic states.

Vector meson nucleon scattering length↗
DOE OSTI2025

Dynamics of the transition from the metastable tetragonal st12 to the diamond-cubic phase in germanium characterized by neutron spectroscopy

The complex phase diagram of germanium allows for exotic crystalline phases recoverable from high pressure. Among these, the tetragonal st12 phase is unusual as it shares characteristics with amorphous Ge resulting in desirable band-gap characteristics. Here, we leverage a high neutron flux and large volume pressure capabilities to characterize st12-Ge and its dynamics upon conversion to diamond-cubic Ge with inelastic neutron scattering. Here, we exploit the characteristics of time-of-flight neutron scattering for time-resolved investigations. This analysis may suggest the existence of a transient disordered state upon annealing befitting the known structural relationship between st12-Ge and amorphous Ge, a relationship that can open the potential for band-gap tuning.

Elemental semiconductors↗
DOE OSTI2020

Reconstruction of neutral-triggered charged recoil jets in √ s = 200 GeV p+p collisions at the STAR experiment

Jets — collimated sprays of hadrons — are produced by hard-scattered partons during the early stages of heavy ion collisions. Hence, they provide a valuable probe of the complex multi-particle dynamics within the hot, dense medium produced in such collisions. In particular, the study of jets recoiling from direct photons (γ dir +jet) and those recoiling from energetic π 0 (π 0 +jet) may shed light on the path-length and initial flavor (quark vs. gluon) dependence of the energy-loss experienced by a parton as it traverses the medium. We present here measurements of the yields of charged recoil jets tagged by γ dir and π 0 in p+p collisions at √S = 200 GeV. These measurements will serve as a vacuum fragmentation reference for an upcoming measurement in Au + Au collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Unveiling the dynamics of little-bang nucleosynthesis

High-energy nuclear collisions provide a unique site for the synthesis of both nuclei and antinuclei at temperatures of kT ≈ 100 – 150 MeV. In these little bangs of transient collisions, a quark-gluon plasma (QGP) of nearly vanishing viscosity is created, which is believed to have existed in the early universe within the first few microseconds after the Big Bang. Analyses of identified particles produced in these little bangs based on the statistical hadronization model for the QGP have suggested that light (anti)nuclei are produced from the QGP as other hadrons and their abundances are little affected by later hadronic dynamics. Here, we find a strong reduction of the triton yield by about a factor of 1.8 in high-energy heavy-ion collisions based on a kinetic approach that includes the effects of hadronic re-scatterings, particularly that due to pion-catalyzed multi-body reactions. This finding is supported by the latest experimental measurements and thus unveils the important role of hadronic dynamics in the little-bang nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Robotic pendant drop: containerless liquid for μs-resolved, AI-executable XPCS

Abstract The dynamics and structure of mixed phases in a complex fluid can significantly impact its material properties, such as viscoelasticity. Small-angle X-ray Photon Correlation Spectroscopy (SA-XPCS) can probe the spontaneous spatial fluctuations of the mixed phases under various in situ environments over wide spatiotemporal ranges (10 −6 –10 3 s /10 −10 –10 −6 m). Tailored material design, however, requires searching through a massive number of sample compositions and experimental parameters, which is beyond the bandwidth of the current coherent X-ray beamline. Using 3.7-μs-resolved XPCS synchronized with the clock frequency at the Advanced Photon Source, we demonstrated the consistency between the Brownian dynamics of ~100 nm diameter colloidal silica nanoparticles measured from an enclosed pendant drop and a sealed capillary. The electronic pipette can also be mounted on a robotic arm to access different stock solutions and create complex fluids with highly-repeatable and precisely controlled composition profiles. This closed-loop, AI-executable protocol is applicable to light scattering techniques regardless of the light wavelength and optical coherence, and is a first step towards high-throughput, autonomous material discovery.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Coupling of organic cation and inorganic lattice in methylammonium lead halide perovskites: Insights into a pressure-induced isostructural phase transition

Organic-inorganic hybrid metal-halide perovskite (OIHP) materials provide a tunable platform for engineering their optoelectronic properties. Although several high-pressure studies have been conducted from the OIHP family of single crystals and films, the exact nature of the dynamic coupling of the CH 3 NH 3 (MA) cation with the octahedral lattice framework and the mechanisms responsible for the structural phase transformation under pressure are not well captured. By combined photoluminescence (PL), synchrotron-based x-ray diffraction, and Raman-scattering studies as a function of pressure from methylammonium lead bromide (MAPbBr 3 ), we shed light on an isostructural phase transition due to the coupling of the MA cation and the PbBr 6 lattice through hydrogen bonding. The sharp discontinuities at ~ 1 GPa and ~ 3 GPa in the PL peak positions correlate with the structural changes observed in high-pressure XRD and Raman-scattering studies. The electronic band edge as a function of pressure is calculated within density-functional theory. The PL peak position, intensity and width of the excitonic peak show significant changes at 2 GPa, which corroborate the changes observed in high-pressure Raman-scattering studies. The frequencies of the lattice modes and the C-H/N-H bending and stretching modes of the MA cation show anomalous changes and other nuances at 2 GPa. The suppression of rotational and orientational disorder of the organic moiety is initiated at 2 GPa and the ordering is completed by 3.0 GPa, leading to an order-disorder type cubic II (Im$\overline{3}$) to orthorhombic ( Pnma ) phase transition. Along with the revelation of an isostructural transformation at 2 GPa, this paper highlights the impact of molecular vibrations on the electronic properties of MAPbBr 3 under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing the shear-induced microstructure of a smectite clay aqueous suspensions using rheo-USANS and rheo-SIPLI measurements

Hypothesis: The static microstructure of aqueous sodium-montmorillonite (Na-Mt) suspensions at low ionic strengths (where Particle Size/Debye Length ≈1) exhibits both the particle–particle ordering as well as aggregation with repulsive ordered domains having characteristic optical birefringence and attractive aggregated entities larger than 20 µm resulting in ever-increasing yield stresses also known as physical aging-rejuvenation behavior. We hypothesize that the attractive particle–particle aggregation is the underlying cause behind the physical aging-rejuvenation behavior observed in Na-Mt suspensions with no contribution from structural dynamics driven by repulsive particle–particle ordering or jamming. Experiments: We investigate the shear-induced microstructure of aqueous Na-Mt suspensions in the sol and gel state using rheo-ultra-small angle neutron scattering (rheo-USANS) experiments at shear rates of 1, 50, 500, and 2000 s −1 . We also perform rheo-shear-induced polarization light imaging (rheo-SIPLI) experiments to relate ordering with shearing and aging. Findings: Shearing the suspensions at low to moderate shear rates induces particle–particle aggregation and shearing at high shear rates induces the breakage of particle–particle aggregation in the sol and gel states, suggesting the microstructural aggregation in the sol and gel state is shear sensitive and a full rejuvenation or breakage of particle–particle aggregation is only achieved at a minimum critical shear rate. The rheo-SIPLI experiments reveal that the sol and gel state exhibited strong Maltese cross patterns at a shear rate of 1000 s −1 , indicating particle–particle ordering. Post shearing, the gel exhibited temporal evolution of storage modulus without any noticeable influence on the appearance of the Maltese cross pattern indicating physical aging and particle ordering are distinct length scale phenomena in Na-Mt suspensions and the physical aging-rejuvenation behaviour is a feature of particle–particle aggregation as opposed to ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Coherent helicity-dependent spin-phonon oscillations in the ferromagnetic van der Waals crystal CrI3

Abstract The discovery of two-dimensional systems hosting intrinsic magnetic order represents a seminal addition to the rich landscape of van der Waals materials. CrI 3 is an archetypal example, where the interdependence of structure and magnetism, along with strong light-matter interactions, provides a new platform to explore the optical control of magnetic and vibrational degrees of freedom at the nanoscale. However, the nature of magneto-structural coupling on its intrinsic ultrafast timescale remains a crucial open question. Here, we probe magnetic and vibrational dynamics in bulk CrI 3 using ultrafast optical spectroscopy, revealing spin-flip scattering-driven demagnetization and strong transient exchange-mediated interactions between lattice vibrations and spin oscillations. The latter yields a coherent spin-coupled phonon mode that is highly sensitive to the driving pulse’s helicity in the magnetically ordered phase. Our results elucidate the nature of ultrafast spin-lattice coupling in CrI 3 and highlight its potential for applications requiring high-speed control of magnetism at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2024

3D Printing ofThermally Responsive Shape Memory LiquidCrystalline Epoxy Networks

Abstract A two-component liquid crystalline epoxy network (LCEN) with shape memory behavior was developed and evaluated as a candidate material for 3D printing. The cure kinetics of the uncured material and the shape memory properties of the cured LCEN were investigated by using parallel plate rheology and dynamic mechanical analysis, respectively. A commercially available fumed silica additive was introduced to the neat, uncured material to improve the rheological properties for 3D printing. The addition of fumed silica was found to increase the yield stress, shear-thinning behavior, and toughness of the uncured epoxy ink. Polarized light microscopy, differential scanning calorimetry, and wide-angle X-ray scattering measurements between the neat and additive-modified LCEN suggested a reduction in liquid crystalline alignment in the modified LCEN, owing to interactions between crystalline domains and fumed silica, which in turn influenced the mechanical behavior. Overall, the additive was found to be successful in preserving the shape memory properties of LCEN while improving its printability.

Chemistry↗
DOE OSTI2023

Optimal gas cooling with minimal aero-opticaldistortion for next generation high-average-power lasers (Progress report, Year 2)

Next-generation lasers that combine high-peak-power ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required for inertial fusion energy generation, laser-based particle acceleration, and to generate compact secondary x- and 𝛾-ray radiation sources, among others. The combination of long gain length with high surface-to-volume ratio to remove residual heat makes gas-cooled multi-slab amplifier heads an inherently aperture- and average power scalable technology that enables this new class of solid-state lasers, and their thermal management becomes the most pressing technical challenge. As the index-of refraction depends on the gas density, heat removal from the slab surfaces unavoidably entails scattering of propagated light from regions of high temperature fluctuations. The requirement to maximize convective heat extraction from the gain medium under the constraint of minimum optical aberration of the beam renders amplifier slab cooling a technological challenge at the intersection of aero-optics, fluid-mechanics and heat transfer. The goal of this research is to leverage computational fluid dynamics and aero optics simulations of different levels of fidelity to devise a numerical modeling and optimization framework for gas-cooled multi-slab amplifiers. The project will be conducted in close collaboration with the Advanced Photon Technologies Group at Lawrence Livermore National Laboratory, where a gas-cooled test stand for laser materials and thermal management structures will be developed and installed. The final goal of the collaborative effort is to manufacture and benchmark a physical prototype of an numerically optimized amplifier head design. Measurement data on solid-state and thermo-optical distortions will be used for the validation of the numerical models. The key technical challenge in this multi-objective design problem is that of balancing optimal heat removal with minimal optical distortion. To facilitate computationally efficient design optimization and, at the same time, deepen our basic understanding of the interaction of light with turbulence, a complementary study that combines high and low-fidelity flow simulations and aero-optical models is proposed. Along the lines of these two objectives and solution strategies, the project is organized into two thrusts.

42 ENGINEERING↗
DOE OSTI2023

Anharmonic Exciton‐Phonon Coupling in Metal‐Organic Chalcogenides Hybrid Quantum Wells

Abstract In contrast to inorganic quantum wells, hybrid quantum wells (HQWs) based on metal‐organic semiconductors are characterized by relatively soft lattices, in which excitonic states can strongly couple to lattice phonons. Therefore, understanding the lattice's impact on exciton dynamics is essential for harnessing the optoelectronic potential of HQWs. Beyond 2D metal halide perovskites, layered metal‐organic chalcogenides (MOCs), which are an air‐stable, underexplored material class hosting room‐temperature excitons, can be exploited as photodetectors, light emitting devices, and ultrafast photoswitches. Here, the role of phonons in the optical transitions of the prototypical MOC [AgSePh] ∞ is elucidated. Impulsive stimulated Raman scattering (ISRS) allows the detection of coherent exciton oscillations driven by Fröhlich interaction with low‐energy optical phonons. Steady state absorption and Raman spectroscopies reveal a strong exciton‐phonon coupling (Huang‐Rhys parameter ≈1.7) and its anharmonicity, manifested as a nontrivial temperature‐dependent Stokes shift. The ab initio calculations support these observations, hinting at an anharmonic behavior of the low‐energy phonons <200 cm −1 . These results untangle complex exciton‐phonon interactions in MOCs, establishing an ideal testbed for room‐temperature many‐body phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coherent diffractive imaging with twisted X-rays: Principles, applications, and outlook

Recent technological breakthroughs in synchrotron and x-ray free electron laser facilities have revolutionized nanoscale structural and dynamic analyses in condensed matter systems. This review provides a comprehensive overview of the advancements in coherent scattering and diffractive imaging techniques, which are now at the forefront of exploring materials science complexities. These techniques, notably Bragg coherent diffractive imaging and x-ray photon correlation spectroscopy, x-ray magnetic dichroism, and x-ray correlation analysis leverage beam coherence to achieve volumetric three-dimensional imaging at unprecedented sub-nanometer resolutions and explore dynamic phenomena within sub-millisecond timeframes. Such capabilities are critical in understanding and developing advanced materials and technologies. Simultaneously, the emergence of chiral crystals—characterized by their unique absence of standard inversion, mirror, or other roto-inversion symmetries—presents both challenges and opportunities. These materials exhibit distinctive interactions with light, leading to phenomena such as molecular optical activity, chiral photonic waveguides, and valley-specific light emissions, which are pivotal in the burgeoning fields of photonic and spintronic devices. This review elucidates how novel x-ray probes can be leveraged to unravel these properties and their implications for future technological applications. A significant focus of this review is the exploration of new avenues in research, particularly the shift from conventional methods to more innovative approaches in studying these chiral materials. Inspired by structured optical beams, the potential of coherent scattering techniques utilizing twisted x-ray beams is examined. This promising direction not only offers higher spatial resolution but also opens the door to previously unattainable insights in materials science. By contextualizing these advancements within the broader scientific landscape and highlighting their practical applications, this review aims to chart a course for future research in this rapidly evolving field.

Physics↗
DOE OSTI2023

Ultrafast enhancement of electron-phonon coupling via dynamic quantum well states

Abstract The density of states at the Fermi surface controls many material properties by influencing the low-energy interactions of conductive electrons. Typically, external tuning knobs generate only small perturbations to the density of states in crystals, since their band structure depends strongly on the lattice potential. In contrast, quantum well states are contingent on a localized potential extrinsic to the crystal lattice and can be easily modified leading to changes in the density of states at the Fermi level. Here, we are able to control the quantum well potential on the surface of Bi 2 Se 3 with light, driving a density of states singularity below E F at ultrafast timescales, thereby triggering a reversible Lifshitz transition. We reveal a substantial ultrafast enhancement of the electron-phonon coupling with repercussions on the relaxation dynamics in the system. We argue that the relaxation dynamics are governed largely by the interplay of the dynamic density of states of the quantum wells with c -axis scattering from the $${A}_{{{{{{{{\rm{1g}}}}}}}}}^{2}$$ A 1g 2 optical phonon mode. These results demonstrate a powerful way to enhance electron-boson interaction on ultrafast timescales providing new avenues for controlling material properties and driving novel quantum phases of matter.

Ciocys, Samuel T.↗
DOE OSTI2022

Study of Short-Range nuclear Correlations in light nuclei using the BeAGLE event generator

Nuclear dynamics at short distances among nucleons is one of the most outstanding phenomena in nuclear physics. Understanding the role of QCD in generating nuclear forces is important for uncovering the underlying physics of Short-Range Correlations (SRCs). In recent years, SRCs has been observed from light to heavy nuclei using fixed target experiments at Jefferson lab via high energy electron-nucleus scattering. In this talk, I will talk about the opportunity of studying SRCs using light nuclei with collider experiments, e.g., the Electron-Ion Collider (EIC). The experimental technique of studying the light nuclei can be based on exclusive processes with tagging final-state particles, in order to fully control the initial state of the target wavefunction. In particular, incoherent diffractive production of J/\psi J / ψ particle off deuteron will be presented. In addition, the spectral function in light nuclei has been recently modeled in the BeAGLE event generator, where the decay kinematics of the light nuclei and their influence on the very forward detector design at the EIC will be discussed.

Tu, Zhoudunming↗
DOE OSTI2025

COMSOL Results for the Nominal Steady-State Operation of the Proposed 95-MW LEU Silicide Core for HFIR Conversion

Engineering design studies are being performed to determine the feasibility of converting the High Flux Isotope Reactor (HFIR) from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel at Oak Ridge National Laboratory. This activity is sponsored by the Office of Reactor Conversion and Uranium Supply (ORCUS) under the auspices of the US Department of Energy National Nuclear Security Administration’s Office of Material Management and Minimization. HFIR is a very high flux, pressurized, light water–cooled and moderated, flux trap–type research reactor with a core made of involute shaped U 3 O 8 /Al cermet fuel plates and coolant channels. HFIR currently operates at a thermal power of 85 MW and supports key national and international missions in neutron scattering, isotope production, materials/fuels irradiation, neutron activation analysis, gamma irradiation, and neutrino research. Advanced multiphysics computational fluid dynamics models have been developed in the COMSOL Multiphysics software to simulate the steady-state operating conditions for the proposed low-and high-density LEU U 3 Si 2 -Al (uranium silicide dispersion) fuel designs. The COMSOL models for HFIR inner and outer fuel element models incorporate various essential inputs and physics such as spatially dependent nuclear heat deposition, multilayer heat conduction, conjugate heat transfer, turbulent flows (using Reynolds-averaged Navier Stokes turbulence models), structural mechanics (thermal–structural interactions and fuel swelling), and oxide layer build-up. This report presents the best-estimate thermal hydraulics results for the low- and high-density optimized silicide LEU core designs at 95 MW steady-state nominal operation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Selection rules and dynamic magnetoelectric effect of the spin waves in multiferroic Bi Fe O 3

Here, we report the magnetic-field dependence of the THz absorption and nonreciprocal directional dichroism spectra of BiFeO 3 measured on the three principal crystal cuts for fields applied along the three principal directions of each cut. From the systematic study of the light polarization dependence, we deduced the optical selection rules of the spin-wave excitations. Our THz data, combined with small-angle neutron scattering results showed that (i) an in-plane magnetic field rotates the q vectors of the cycloids perpendicular to the magnetic field and (ii) the selection rules are mostly determined by the orientation of the q vector with respect to the electromagnetic fields. We observed a magnetic field history-dependent change in the strength and the frequency of the spin-wave modes, which we attributed to the change of the orientation and the length of the cycloidal q vector, respectively. Finally, we compared our experimental data with the results of linear spin-wave theory that reproduces the magnetic-field dependence of the spin-wave frequencies and most of the selection rules, from which we identified the spin-polarization coupling terms relevant for the optical magnetoelectric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗